SAP supplied document types and applications

HI gents,
As SAP is installed, there is quite a few document types and applications "installed" by default.
Can i delete them, or are they used by/expected by other parts of the system?
Any comments appreciated.
Espen

Hi guys,.
Thanks for your feedback. I'm fully aware of the techical side of this, and i know i can delete and change. Even though four types, D01, EBR, Q01 and Q02 are marked read only.
I was more looking for the reason they are there, as in why did SAP include them and is there any documentation behind it.
Espen

Similar Messages

Document type and No. range for non leading ledger

Hi Friends,
can anybody tell me about the document type and No. range I can take for the non leading ledger.
Regards

Ok Pankaj,
I am taking document types by copying it from the SAP standard document type and the No. range identical to the No. range assigned in the standard Doc. type. Is it ok
LA                9A
LB                 9B
LC                 9C
LD                 9D
LE                  9E
LF                  9F
LG                  9G
LH                  9H
LI                   9I
LJ                  9J
LK                 9K
LM                 9L
LN                 9M
LN                 9N
LO                 9O
LP                  9P
LQ                 9Q
LR                  9R
LR                  9S
LS                  9T
LT                  9U
LU                 9V
LV                9W

Output type and application for order cancellation

What is the output type and application for the cancellation of a sales order

Hi,
Try This
cancellation of sales order:
go to va02 enter the sales order and click enter
then sales document->delete
Reward if usefull

New Document Types and new Number Ranges

Hi,
Plz tell me How to configure New Document Types and new Number Ranges for Services and Asset Purchases.
How can i maintain Services with or without Master data.
Plz tell how much services are there and how to configure step by step

Hi
New document type can be configured in SPRO - SAP IMG- Material management - Purchasing - Purchase order - Define number rabges / define document types.
With out service master straightaway you can create the Service PO with account assigment.
AC03 - Create service master record.
ML10 - Model service specifications
Then Service conditions ML33 or ML39 or ML45
Create the PO and then do the service entry in ML81N
Regards,
Raman

Document Types and No range

Hi Gurus, i am new to SAP,
please guide me in
Configuring document types and number ranges for PR, RFQ, PO, Quantity Contract, Value Contract and Scheduling Agreements with release.
Thank is Advance
Kapil

You have to maintain No Ranges for PR at Materials Management->Purchasing->
Purchase Requisition->Define Number Ranges
Define number range interval
Choose type of number assignment (internal or external)
You maintain the associated number ranges in the step Define Number Ranges under "Purchasing".
SAP recommends that you accept the settings defined in the standard system. In this case, no action is required on your part.
<b>Document type</b>
Purchase Requisition->Define Document Types
Steps
1)Create new document types
2)Define the item interval
3)Allowed Item category.
4)Define allowed follow-on document types
5)Assign document types to a number range group
Similarly for all the processes you can maintain Number ranges and Document Types at IMG menu path at Purchasing.
Reward if helpful
Regards
Sanjay l

Document type and item category

Hi All,
I have created two document types in MM for creating Purchasing Requisition. One for material and for service and material. But when i am selecting service and material document type, the item category at item level is automatically converted to D(Service) even though i dont select any thing(material). I have not done any settings for iterm category based on document type. Pls let me know why i am facing this problem.
Thanks,
Raju

Hi Amit,
For both the document types (Material and service, service) the item category standard and service are assinged. I have checked in SPRO--->MM-->Purchasing->Purchase requisition-->Define document type--->Check Allowed item category assingment and Link purchase requisition document type.
Hi Raghavendra
If SAP standard service document type then we cant take material and can take service only for creating PR, but in my case i have created one document type and named it as service and for this document type i have assigned item category of service and standard. In this case it should allow me to create PR with standard item category, but its not allowing me to do so. Pls let me know how can i solve this issue.
Thanks,
Raju

SAP Standard Document type Deleted

Hi All,
SAP uses a Satndard Document type for Scheduling Agreeement -- LPA.
This is not seen in any servers.
how can i restore this back.
Regards
Amey

I donot think you can restore it after deleting it.
Go to SPRO> Materials Management>Purchasing>Scheduling Agreements>Define Document type
Select Any existing document type and click on COPY AS icon. Make sure you check the resease document indicator and also assign a different number range after you have recreated LPA by copying from LP or any other doc type

The system could not find a javax.ws.rs.ext.MessageBodyWriter or a DataSourceProvider class for the com.rest.assignment.EmpBean type and application/json mediaType. Ensure that a javax.ws.rs.ext.MessageBodyWriter exists in the JAX-RS application for the

Hi,
Im trying to create a Rest WS with a @GET method that will return me an Emp object. I need the output as a JSON string.
I have created a dynamic web project and added javax RS jars:
When im trying to run this, i'm getting the below mentioned error:
FlushResultHa E org.apache.wink.server.internal.handlers.FlushResultHandler handleResponse The system could not find a javax.ws.rs.ext.MessageBodyWriter or a DataSourceProvider class for the com.rest.assignment.EmpBean type and application/json mediaType. Ensure that a javax.ws.rs.ext.MessageBodyWriter exists in the JAX-RS application for the type and media type specified.
RequestProces I org.apache.wink.server.internal.RequestProcessor logException The following error occurred during the invocation of the handlers chain: WebApplicationException (500 - Internal Server Error)
Please help as im stuck with this from long.
Thanks in advance.
Below is the code for my service class:
package com.rest.assignment;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.util.Enumeration;
import java.util.HashSet;
import java.util.Properties;
import java.util.Set;
import javax.ws.rs.GET;
import javax.ws.rs.Path;
import javax.ws.rs.Produces;
import javax.ws.rs.core.Application;
import javax.ws.rs.core.MediaType;
import javax.ws.rs.core.Response;
@Path("/restService")
public class RestService extends Application {
    @GET
    @Path("/getEmpDetails")
    @Produces(MediaType.APPLICATION_JSON)
    public Response getStringResponse()
        EmpBean empBean = new EmpBean();
        String filePath = "C:/Program Files/IBM/workspace/HelloWorld/src/com/rest/resources/EmpData.properties";
        Properties properties = new Properties();
        try {
            properties.load(new FileInputStream(filePath));
        } catch (FileNotFoundException e) {
            e.printStackTrace();
        } catch (IOException e) {
            e.printStackTrace();
         Enumeration e = properties.propertyNames();
         String result="";
        String[] empDetailsArr;
        while (e.hasMoreElements()) {
          String key = (String) e.nextElement();
          String empDetails = properties.getProperty(key);
          empDetailsArr=empDetails.split(",");
          empBean.setFirstName(empDetailsArr[0]);
          empBean.setLastName(empDetailsArr[1]);
          empBean.setEmpId(empDetailsArr[2]);
          empBean.setDesignation(empDetailsArr[3]);
          empBean.setSkillSet(empDetailsArr[4]);
          result = empDetailsArr[1];
        //return empBean;
        return Response.ok(empBean).type(MediaType.APPLICATION_JSON_TYPE).build();
    @Override
    public Set<Class<?>> getClasses() {
        Set<Class<?>> classes = new HashSet<Class<?>>();
        classes.add(RestService.class);
        classes.add(EmpBean.class);
        return classes;
and my empBean goes like this:
package com.rest.assignment;
public class EmpBean {
    private String firstName;
    private String lastName;
    private String empId;
    private String designation;
    private String skillSet;
    public String getFirstName() {
        return firstName;
    public void setFirstName(String firstName) {
        this.firstName = firstName;
    public String getLastName() {
        return lastName;
    public void setLastName(String lastName) {
        this.lastName = lastName;
    public String getEmpId() {
        return empId;
    public void setEmpId(String empId) {
        this.empId = empId;
    public String getDesignation() {
        return designation;
    public void setDesignation(String designation) {
        this.designation = designation;
    public String getSkillSet() {
        return skillSet;
    public void setSkillSet(String skillSet) {
        this.skillSet = skillSet;
Web.xml goes like this:
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="3.0" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd">
<display-name>restWS</display-name>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
<servlet>
<servlet-name>REST</servlet-name>
<servlet-class>com.ibm.websphere.jaxrs.server.IBMRestServlet</servlet-class>
<init-param>
   <param-name>javax.ws.rs.Application</param-name>
   <param-value>com.rest.assignment.RestService</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>REST</servlet-name>
<url-pattern>/rest/*</url-pattern>
</servlet-mapping>
</web-app>
When i try to return a string from my get method, it gives me a proper response. i get this exception when im trying to return a JSON response.

Hi,
Im trying to create a Rest WS with a @GET method that will return me an Emp object. I need the output as a JSON string.
I have created a dynamic web project and added javax RS jars:
When im trying to run this, i'm getting the below mentioned error:
FlushResultHa E org.apache.wink.server.internal.handlers.FlushResultHandler handleResponse The system could not find a javax.ws.rs.ext.MessageBodyWriter or a DataSourceProvider class for the com.rest.assignment.EmpBean type and application/json mediaType. Ensure that a javax.ws.rs.ext.MessageBodyWriter exists in the JAX-RS application for the type and media type specified.
RequestProces I org.apache.wink.server.internal.RequestProcessor logException The following error occurred during the invocation of the handlers chain: WebApplicationException (500 - Internal Server Error)
Please help as im stuck with this from long.
Thanks in advance.
Below is the code for my service class:
package com.rest.assignment;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.util.Enumeration;
import java.util.HashSet;
import java.util.Properties;
import java.util.Set;
import javax.ws.rs.GET;
import javax.ws.rs.Path;
import javax.ws.rs.Produces;
import javax.ws.rs.core.Application;
import javax.ws.rs.core.MediaType;
import javax.ws.rs.core.Response;
@Path("/restService")
public class RestService extends Application {
    @GET
    @Path("/getEmpDetails")
    @Produces(MediaType.APPLICATION_JSON)
    public Response getStringResponse()
        EmpBean empBean = new EmpBean();
        String filePath = "C:/Program Files/IBM/workspace/HelloWorld/src/com/rest/resources/EmpData.properties";
        Properties properties = new Properties();
        try {
            properties.load(new FileInputStream(filePath));
        } catch (FileNotFoundException e) {
            e.printStackTrace();
        } catch (IOException e) {
            e.printStackTrace();
         Enumeration e = properties.propertyNames();
         String result="";
        String[] empDetailsArr;
        while (e.hasMoreElements()) {
          String key = (String) e.nextElement();
          String empDetails = properties.getProperty(key);
          empDetailsArr=empDetails.split(",");
          empBean.setFirstName(empDetailsArr[0]);
          empBean.setLastName(empDetailsArr[1]);
          empBean.setEmpId(empDetailsArr[2]);
          empBean.setDesignation(empDetailsArr[3]);
          empBean.setSkillSet(empDetailsArr[4]);
          result = empDetailsArr[1];
        //return empBean;
        return Response.ok(empBean).type(MediaType.APPLICATION_JSON_TYPE).build();
    @Override
    public Set<Class<?>> getClasses() {
        Set<Class<?>> classes = new HashSet<Class<?>>();
        classes.add(RestService.class);
        classes.add(EmpBean.class);
        return classes;
and my empBean goes like this:
package com.rest.assignment;
public class EmpBean {
    private String firstName;
    private String lastName;
    private String empId;
    private String designation;
    private String skillSet;
    public String getFirstName() {
        return firstName;
    public void setFirstName(String firstName) {
        this.firstName = firstName;
    public String getLastName() {
        return lastName;
    public void setLastName(String lastName) {
        this.lastName = lastName;
    public String getEmpId() {
        return empId;
    public void setEmpId(String empId) {
        this.empId = empId;
    public String getDesignation() {
        return designation;
    public void setDesignation(String designation) {
        this.designation = designation;
    public String getSkillSet() {
        return skillSet;
    public void setSkillSet(String skillSet) {
        this.skillSet = skillSet;
Web.xml goes like this:
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="3.0" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd">
<display-name>restWS</display-name>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
<servlet>
<servlet-name>REST</servlet-name>
<servlet-class>com.ibm.websphere.jaxrs.server.IBMRestServlet</servlet-class>
<init-param>
   <param-name>javax.ws.rs.Application</param-name>
   <param-value>com.rest.assignment.RestService</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>REST</servlet-name>
<url-pattern>/rest/*</url-pattern>
</servlet-mapping>
</web-app>
When i try to return a string from my get method, it gives me a proper response. i get this exception when im trying to return a JSON response.

Reading the description of Sales document type and Profit centre from table

Hi
I want to print the description of Sales document type and Profit center on output
I have checked in table TVAK and CEPC but i am unable to pick description against the code
Can anyone please suggest from where can i capture the description of sales document type and profit centre
Thanks and Regards
Sunil Srinivasan

Hi
If you have the sales document number VBELN then pass this VBELN in to table VBAK and you can get the sales document type VBAK-AUART.
Now pass the same VBELN to VBAP table here you can get the Profit Center VBAP-PRCTR
For sales Document type description you pass the VBAK-AUART values into table TVAKT table and get the values for TVAKT-BEZEI is you sales document type description
For Profit center description goto table CEPCT and enter the profit center you will get the
KTEXT
LTEXT
MCTXT
regards
Prashanth
Edited by: Prashanth@SD on Oct 25, 2010 12:29 PM

BBP_BS_GROUP_BE for new document type and number range

Hi gurus,
I am working on Classic scenario in SRM and currently have used the above BADI to use a different document type and number range when creating the PO in the backend system. It all works fine. The only thing is I noticed that the BE_DOC_TYPE field in the shopping cart is still reflected as 'EC' even though the PO created in ECC is for example EC1. My question: Is this standard SRM? If so, is it common to leave this field as it is or is it advisable for us to change the document type to EC1 as well? Also, is there any implication in standard SRM reporting and downstream processes that you are aware of?
Appreciate any advice on the above.
Cheers!
Sf

We have ended up having to populate the document type on a custom field or alternatively replace the existing one.

Document type and invoices coming from SD

Hello,
Does anyone know where is the customizing point where I make the link between the document type and the invoices coming from SD (standard type RV)?
Best regards

Hi
If you have the sales document number VBELN then pass this VBELN in to table VBAK and you can get the sales document type VBAK-AUART.
Now pass the same VBELN to VBAP table here you can get the Profit Center VBAP-PRCTR
For sales Document type description you pass the VBAK-AUART values into table TVAKT table and get the values for TVAKT-BEZEI is you sales document type description
For Profit center description goto table CEPCT and enter the profit center you will get the
KTEXT
LTEXT
MCTXT
regards
Prashanth
Edited by: Prashanth@SD on Oct 25, 2010 12:29 PM

Field editable in FB02 for only one document type and user

Hi:
I have a question about editing a field and I hope you can help me. I need to make a field editable in FB02, but only for one document type and two users. The field is BSEG-ZFBDT, Baseline payment dte.
I have tried in ‘Document Change Rules’, make this field editable when line item not cleared, but it works for all document types and users.
Please, any idea?
Thanks in advance for your time.
Best regards.

Hi,
You have to write a ABAP code to achieve this.
Validation is another Option where you can mention that value is allowed in the Baseline Date field only if the User and Document type value satisfies.
BR
Amitash

Oracle B2B not picking up Document type and document version from JMS msg

Hi,
We have developed guideline and schema for a custom positional flat file using Oracle B2B Document Editor. We were able to creat and deploy the agreement. But when we drop a message on a Queue being listened by Oracle B2B. The document type and version values were empty. We got the following error,
Error Code B2B-50083
Error Description Machine Info: (xxxxx) Description: Document protocol identification error.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Document protocol identification error.
This is our Java code for testing that drops the message, and I can see the JMS header with these values.
message.setText(messageText);
message.setStringProperty("FROM_PARTY", "CT-Sender");
//message.setStringProperty("FROM_PARTY", "RemoteTP");
message.setStringProperty("TO_PARTY", "MyCompany");
message.setStringProperty("DOCTYPE_NAMEe", "CT");
message.setStringProperty("DOCTYPE_REVISION", "CT-AES");
We were able to test a 850 document successful through different document and agreement ....
Thanks
John

We have uploaded the ecs and xsd files. Are they the parser files you are mentioning? The following is the information we have for the transaction. I am just surprised whty the Document Type and others are empty.
Thanks
John
Id 0A9F196E132459F393C00000184B4897
Message Id 0A9F196E132459F392300000184B4893
Refer To Message Refer To Message
Sender Type Name
Sender Value CT-Sender
Receiver Type Name
Receiver Value MyCompany
Sender CT-Sender
Receiver MyCompany
Agreement Id
Agreement
Document Type
Document Protocol
Document Version
Message Type REQ
Direction INBOUND
State MSG_ERROR
Acknowledgement Mode NONE
Response Mode ASYNC
Send Time Stamp 09/07/2011 04:40 PM
Receive Time Stamp 09/07/2011 04:40 PM
Document Retry Interval(Channel) 0
Document Remaining Retry(Channel) 0
Document Retry Interval(Agreement)

Error while uploading images to SAP Mobile Documents from iPad application using ObjectiveCMIS.

Hi,
I am getting the error while uploading images to SAP Mobile Documents from custom iOS(iPad )application using ObjectiveCMIS library.
My Custom method is as follows:
- (void)createSalesOrderRouteMapImageInFolder:(NSString*)salesOrderRouteMapFolderId routeMapImageTitle:(NSString *)imageTitle routeMapContent:(NSData *)imageData
    NSInputStream *inputStream = [NSInputStream inputStreamWithData:imageData];
    NSMutableDictionary *properties = [NSMutableDictionary dictionary];
    [properties setObject:[NSString stringByAppendingFileExtension:imageTitle] forKey:@"cmis:name"];
    [properties setObject:@"cmis:document" forKey:@"cmis:objectTypeId"];
    [self.session createDocumentFromInputStream:inputStream
                                       mimeType:@"image/png"
                                     properties:properties
                                       inFolder:salesOrderRouteMapFolderId
                                  bytesExpected:[imageData length]
                                completionBlock:^(NSString *objectId, NSError *error) {
                                    NSLog(@"Object id is %@",objectId);
                                    if(error == nil) {
                                        [inputStream close];
                                        NSLog(@"Uploading Sales order route map successfully.");
                                        [[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderSuccessNotification object:nil];
                                    } else {
                                        [inputStream close];
                                        NSLog(@"Uploading sales order route map failed.");
                                        [[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderFailedNotification object:error];
                                } progressBlock:^(unsigned long long bytesUploaded, unsigned long long bytesTotal) {
                                    NSLog(@"uploading... (%llu/%llu)", bytesUploaded, bytesTotal);
OBjectiveCMIS Method in which i am getting error during upload:
- (void)sendAtomEntryXmlToLink:(NSString *)link
             httpRequestMethod:(CMISHttpRequestMethod)httpRequestMethod
                    properties:(CMISProperties *)properties
            contentInputStream:(NSInputStream *)contentInputStream
               contentMimeType:(NSString *)contentMimeType
                 bytesExpected:(unsigned long long)bytesExpected
                   cmisRequest:(CMISRequest*)request
               completionBlock:(void (^)(CMISObjectData *objectData, NSError *error))completionBlock
                 progressBlock:(void (^)(unsigned long long bytesUploaded, unsigned long long bytesTotal))progressBlock
    // Validate param
    if (link == nil) {
        CMISLogError(@"Must provide link to send atom entry");
        if (completionBlock) {
            completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeInvalidArgument detailedDescription:nil]);
        return;
    // generate start and end XML
    CMISAtomEntryWriter *writer = [[CMISAtomEntryWriter alloc] init];
    writer.cmisProperties = properties;
    writer.mimeType = contentMimeType;
    NSString *xmlStart = [writer xmlStartElement];
    NSString *xmlContentStart = [writer xmlContentStartElement];
    NSString *start = [NSString stringWithFormat:@"%@%@", xmlStart, xmlContentStart];
    NSData *startData = [NSMutableData dataWithData:[start dataUsingEncoding:NSUTF8StringEncoding]];
    NSString *xmlContentEnd = [writer xmlContentEndElement];
    NSString *xmlProperties = [writer xmlPropertiesElements];
    NSString *end = [NSString stringWithFormat:@"%@%@", xmlContentEnd, xmlProperties];
    NSData *endData = [end dataUsingEncoding:NSUTF8StringEncoding];
    // The underlying CMISHttpUploadRequest object generates the atom entry. The base64 encoded content is generated on
    // the fly to support very large files.
    [self.bindingSession.networkProvider invoke:[NSURL URLWithString:link]
                                     httpMethod:httpRequestMethod
                                        session:self.bindingSession
                                    inputStream:contentInputStream
                                        headers:[NSDictionary dictionaryWithObject:kCMISMediaTypeEntry forKey:@"Content-type"]
                                  bytesExpected:bytesExpected
                                    cmisRequest:request
                                      startData:startData
                                        endData:endData
                              useBase64Encoding:YES
                                completionBlock:^(CMISHttpResponse *response, NSError *error) {
                                    if (error) {
                                        CMISLogError(@"HTTP error when sending atom entry: %@", error.userInfo.description);
                                        if (completionBlock) {
                                            completionBlock(nil, error);
                                    } else if (response.statusCode == 200 || response.statusCode == 201 || response.statusCode == 204) {
                                        if (completionBlock) {
                                            NSError *parseError = nil;
                                            CMISAtomEntryParser *atomEntryParser = [[CMISAtomEntryParser alloc] initWithData:response.data];
                                            [atomEntryParser parseAndReturnError:&parseError];
                                            if (parseError == nil) {
                                                completionBlock(atomEntryParser.objectData, nil);
                                            } else {
                                                CMISLogError(@"Error while parsing response: %@", [parseError description]);
                                                completionBlock(nil, [CMISErrors cmisError:parseError cmisErrorCode:kCMISErrorCodeRuntime]);
                                    } else {
                                        CMISLogError(@"Invalid http response status code when sending atom entry: %d", (int)response.statusCode);
                                        CMISLogError(@"Error content: %@", [[NSString alloc] initWithData:response.data encoding:NSUTF8StringEncoding]);
                                        if (completionBlock) {
                                            completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeRuntime
                                                                                 detailedDescription:[NSString stringWithFormat:@"Failed to send atom entry: http status code %li", (long)response.statusCode]]);
                                  progressBlock:progressBlock];
Attaching the logs:
ERROR [CMISAtomPubBaseService sendAtomEntryXmlToLink:httpRequestMethod:properties:contentInputStream:contentMimeType:bytesExpected:cmisRequest:completionBlock:progressBlock:] HTTP error when sending atom entry: Error Domain=org.apache.chemistry.objectivecmis Code=260 "Runtime Error" UserInfo=0x156acfa0 {NSLocalizedDescription=Runtime Error, NSLocalizedFailureReason=ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public void com.sap.mcm.server.service.AbstractChangeLogService.updateChangeLog(java.lang.String,boolean) throws com.sap.mcm.server.api.exception.MCMException method on bean instance com.sap.mcm.server.nw.service.NwChangeLogService@4e7989f3 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|NwChangeLogService in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.ejb.EJBTransactionRolledbackException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a; nested exception is: javax.ejb.EJBException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a}
2015-03-12 04:08:31.634 Saudi Ceramics[4867:351095] Uploading sales order route map failed.

Hi Sukalyan,
Have you checked the below links?
These will give you step by step implementation procedure.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a099a3bd-17ef-2b10-e6ac-9c1ea42af0e9?quicklink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/display/WDJava/KmuploadusingWebdynproapplication
Regards,
Sandip

Comparision between SAP Easy Document Management and MOSS2007

Hi,
Could anyone please guide what are the differet features available in SAP EASY DOCUMENT MANAGEMENT solution which are not present in MOSS2007.
I know both are very good and very robust solutions but i want to know which one is having better qualities.
Please guide.
Thanks and Regards

hi,
Acually speeking yes all product have their own advantage and dis advantages also. but alsways but as consultant, we could refeiring Edms, coz,
The types of documents range from "documents" in proprietary SAP format typically stored in the SAP database (such as financial documents, purchase orders, closed master records) to documents usually created, viewed and/or edited by applications other than SAP, though they may have some significance or bearing on business processes within the SAP system
itself (for example, technical drawings referenced from bill of materials stored in the SAP database).
Also, we could use external content server to store enormose data with out affecting the performance. also her we could extend[scale up] Content server.
this is like similar to Windows, user need not know full SAP. even though can work EDMS.
By using EDMS, we can integrate to Logisic [SAP] copmonents.
Also by Interfacing with, third party applction software like Acad, UG, Lous note........etc
Further details please refer this url........
Benakaraj
??P

SAP supplied document types and applications

Similar Messages

Maybe you are looking for