SAP SWIFT as replacement for IWAY adapter

We are planning to replace the current IWAY adapter with the SAP SWIFT, however, it is found out that its usage is very different from the IWAY. Currently, we have several interfaces that use the IWAY adapter, basically, it is maintained in the DESIGN and has a metadata adapter which enables it to be used by the interfaces in the CONFIG. However, for the SAP SWIFT, there is no metadata adapter in it, it looks like just an ordinary stand alone interface having objects in both design and config. I am just wondering on how would the interfaces be able to use this SAP SWIFT? are there major changes in the interfaces (mapping, config, etc.) to be done in order to utilize the SAP SWIFT?
Thanks!

Hi,
I dont think SAP SWIFT will replace IWAY adapter ,IF you refered my first replay you will find below info,which explined clearly
(SAP NetWeaver XI) component lets you manage the pay-to-reconcile business scenario, processes, and mappings. The epository also contains the integration directory, where you can manage the technical characteristics of partners, such as party identification and collaboration agreements.When using FIN, you have the following file-adapter-specific functionality:
u2022 Creation of SWIFTNet-specific files formatted as protocol data units (PDUs) in the automated file transfer (AFT) format
u2022 Local user authentication management between SAP NetWeaver XI and the SWIFTAlliance Access messaging
interface, which eliminates the need to authenticate users to many different systems.
u2022 File transfer between SAP Net Weaver XI and SWIFTNet via FTP or through a shared folder.
u2022 Direct processing of SWIFTNetspecific files, formatted as PDUs of the AFT format by SAP ERP Financials
The following capabilities are enabled when using the FileAct messaging service:
u2022 Transmission of batch messages via the file transfer agent and processed by the SWIFTAlliance Gateway, which
manages access to SWIFTNet u2022 Local authentication between SAP NetWeaver XI and SWIFTAlliance Gateway
u2022 File transfer between SAP NetWeaver XI and SWIFTAlliance Gateway via FTP or through a shared folder.
Regards,
Raj

Similar Messages

Problem about Iway Adapter for SAP

My Problem is when I updated the data in SAP system, Iway adapter also updated but in my application did not update this data at all, so I needed to restart Weblogic server and then it was updated ka. Thus, whenever I changed the data in SAP, I need to stop and start Weblogic server again and again in order to make it update na ka. I don’t know what the problem is about the server and How I can get over it. Can somebody give me any suggestion?

Adapters on WebLogic 7.0 are very old and are application view based adapters.
Wanted to know what version of WebLogic and iWay adapter will support the integration with SAP ECC 6.0?It depends on how you plan to use the Adapters (ie with OSB or SOA Suite).
OSB 10.3.1--http://www.oracle.com/technology/products/soa/service-bus/collateral/documentation.html
http://www.oracle.com/technology/software/products/osb/index.html
http://download.oracle.com/otndocs/tech/products/integration/service-bus/SAPDEMO.zip
SOA Suite 11g- -http://download.oracle.com/docs/cd/E15523_01/doc.1111/e17057/toc.htm
iWay is the OEM for both adapters.
Also is there any recommended upgrade / migration plan defined for such a scenario? Adapter on WebLogic 7.0 are very old and there is no migration path.
Any compatibility issues to be aware of. Please provide any details / references related to thisNothing I'm aware of. To avail connectivity to SAP ECC6.0, you will have to use latest weblogic for which the adapters are certified.
Manoj

Replacement for dvi to vga adapter for late 2008 17"Macbook pro

Hello,
I have a 17" inch late 2008 mack pro. The apple dvi to vga adapter cable is not working anymore. I can seem to find a replacement for it. I have tried the generic dvi to vga adapter (image attached). This does not work. Please advise

Hello mshameel,
It may help to reset your system's SMC and NVRAM.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Cheers,
Allen

Where can I find a replacement for the power adapter tip?

I need to replace the small adapter that allows the power adapter to be inserted into a socket. Does apple sell this part separately?
The adapter itself works fine. But the tip that gets inserted into the adapter, and then the wall, has started to make sparks. I'm afraid it's going to catch fire, or cause a fire. When plugged into the wall, I hear sparks and I see smoke coming out. If I adjust it's position by slightly withdrawing it from the wall socket, so that there is minimal contact, the sparks stop. But I am a little worried now that I can't leave my MacBook Pro retina plugged in without risk of fire. This started about a month ago after two years of use without any issues.
To be clear, I'm not talking about the adapter itself, but the tip that gets inserted into the adapter, and in turn allows the adapter to be inserted into a socket.
It seems wrong to shell out $80 for a whole new adapter when all I need to replace is the wall adapter.

What about the world travel adapter
http://store.apple.com/us/product/MB974ZM/B?fnode=MTY1NDEwMQ
The Kit is designed to work with iPod, iPhone, iPad, Apple MagSafe Power Adapters (for MacBook and MacBook Pro), Portable Power Adapters (for iBook and PowerBook), and AirPort Express.

AC Adapter replacement for Ext

Hello,
I need to replace the AC Adapter of my Sound Blaster Extigy unit.
Can I use a standard one or do I need to buy one from you.
If I can use a generic one, could you give me the specs?
Or,
If I need to buy one from you, where can I find it's
Thank you.

Tapanti,
It is a 2V AMP Power supply. We do have them available for order through our direct sales department. Try calling them and ordering one: -800-998-000 option #
Jeremy

I'm having a brand new unopened Apple 5W USB adapter from UK. I want an Indian version USB adapter. Will Apple Store replace my USB adapter for free of cost ?

I'm having a brand new unopened Apple 5W USB adapter from UK for my iphone 5. I want an Indian version USB adapter. Will Apple Store replace my USB adapter for free of cost ?

Perhaps, but maybe not, as what can they do with one with the UK plugs? I'm just saying regional things like that often have to be returned at a store in the country you bought them.
But, just go and ask as the worse they can say is no. If they do say no they cannot exchange it, then for very little money you can buy a UK-to-India plug adapter and use that charger in India anyway. Such plug adapters are only $2-$5 here in the USA on Amazon.

Asking for power adapter replacement

How to order for replacement of power adapter for my WRT160N router?
From forum thread
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=20899
I can order a replacement of my supplied power adapter (MU06-6120050-C5) with a new one (PS-WRT160N-V3.2-E) because my original one must be connected first to the power outlet before being connected to the router. That conditiongave me a problembecause everytime I have power failure, I need to manually disconnect my router and then reconnect it to the power adapter, otherwise my router won't function.
So, how is the process to order for power adapter replacement?

I think you need to contact linksys to get the replacement.

Can I replace my power adapter for free within warranty for the hook which is used to coil the cord on the power adapter is broken.

Can I replace my power adapter for free within warranty for the hook which is used to coil the cord on the power adapter is broken when fall down.

Hello vanexe,
Welcome to the HP Consumer Support Community.
This is a peer-to-peer community for customers to connect and share solutions regarding their HP products. It is not a venue to contact HP directly. If you have additional or direct feedback for HP about their products or services, please use the link below for alternate contacts.
http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
If you have other questions and concerns about using the forum, please feel free to send me a private message.
Thank you.
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

Where i can get replacement for my cinema display 65W power adapter?

Hi, who can tell me where i can get replacement for my cinema display 65W power adapter?

If the display uses the Apple Display Connector (ADC)
<http://upload.wikimedia.org/wikipedia/commons/thumb/0/09/AppleDisplayConnector.j pg/800px-AppleDisplayConnector.jpg>
you will need a DVI to ADC adapter.
<http://www.welovemacs.com/mb571zla.html>
They are also available on eBay.
<http://www.ebay.com/itm/Apple-DVI-to-ADC-adapter-A1006-for-Apple-LCD-monitors-Mi nt-Condition-/251073546040?pt=US_Video_Cables_Adapters&hash=item3a75264738#ht_50 0wt_1089>

IWay Adapter for Siebel

Hi,
   Could you please tell me what are the advantages of using iWay adapter to integrate with Siebel?
   Is it possible to use file or HTTP adapter to send data to Siebel? If yes, then why do we need iway adapter?
   Thanks in advance...
Regards,
Vivek.

Hi Vivek,
Basically u will have 3 transport protocols in Siebel iWay Adapter like File,MQ,HTTP.You can use any on of the transport protocol basing on the requirement.
Please see the below threads
iWAY
IWAY Adapter(siebel): Error while using Applicaiton Explorer
Integrating JDEdwards system with XI using IWAY adapter part - I
Integrating JDEdwards system with XI using IWAY adapter part - III
Integrating JDEdwards system with XI using IWAY adapter part - II
XI to mainframe adapter
B2B Adapters
step by step procedure to configure a BAAN adapter
Siebel - http://www-128.ibm.com/developerworks/rational/library/05/419_siebel/index.html
Push Data to MVC Architectured application using XI
Invoke Webservices using SAPXI
Testing XI exposed Web-Services
Regards,
Vinod.

IDOC to IDOC using IWay Adapter?

Hi,
I believe I have sent my post to the wrong forum. Sorry about that.
Can anyone here help? Please.
The post I am talking about is:
IDOC to IDOC using IWay Adapter?
P.S.: How can I move that post to the right forum?
Regards

Hi:
Well, the Oracle SAP Adapter will be an option for u.
There is one alternative withing the SAP Adatper, that allows u to present as Web Services (IBSE Servlet), operations available in SAP.
So, publishing Web Services with the Adapter, is definitely something u can do, and just wire them withing OSB.
More information for the Adatper is available, here: http://docs.oracle.com/cd/E14571_01/doc.1111/e17656/config.htm#XIPSA002
hope this helps
best

New Macbook a good replacement for 12" Powerbook?

I think, besides the inch in display difference, that the new macbook WOULD HAVE made a GREAT GREAT GREAT replacement for users loving or wanting the portability, yet pro versatility of the old 12" Powerbooks. I think however that Apple has missed the mark in one BIG BIG WAY! Firewire. People who wanted something like the 12" powerbook wanted the power of the Macbook Pro in a smaller package. Apple hit the nail on the head with incorporating the same graphics performance, by using aluminum, by making it lighter, and by putting in the illuminated keyboard (only in the 2.4 model though). But on the last detail, they missed it. Firewire. there is no workaround. period. Why preload the systems with iMovie when you can't import video from MOST modern digital camcorders? WITHOUT EVEN introducing a new port with adapters (like they did with the Display Port). I think I would've sold my old macbook pro and had instantly purchased the new macbook if Apple had just included that one VITAL port. I would even prefer them putting it in the place of one of the two USB ports. But without being able to import video from my NEW minidv, there is just no way i could buy that macbook and call myself a proud mac owner. What kind of digital hub would that be? Isn't your slogan "works right out of the box."...? what do you guys think about the new macbook being a 12" powerbook replacement??

I have the same situation. I wanted to upgrade from my 12" Powerbook and would move up to the 13" screen of the new MacBook (15" is much too big for my needs). Another family member has the 15" Powerbook and has always liked my smaller size. I was ready to order 2 of the 13" MacBooks and was then stunned to see that Firewire was missing. I have a Sony DV camcorder for movies. It appears Apple expects me to use my old Powerbooks to input the video into iMovie and then transfer it over to my new MacBook. This is not the cutting edge Apple Computer Company that I have been a customer of for 25 years.
If Apple wants to add firewire to the new MacBooks, develop a USB / Ethernet to firewire adapter, or add a 13" MacBook Pro (w/ firewire) to the line-up, they will have a customer. Otherwise, I will hold onto my old Powerbooks until this is corrected.

A replacement for the Quicksort function in the C++ library

Hi every one,
I'd like to introduce and share a new Triple State Quicksort algorithm which was the result of my research in sorting algorithms during the last few years. The new algorithm reduces the number of swaps to about two thirds (2/3) of classical Quicksort. A multitude
of other improvements are implemented. Test results against the std::sort() function shows an average of 43% improvement in speed throughout various input array types. It does this by trading space for performance at the price of n/2 temporary extra spaces.
The extra space is allocated automatically and efficiently in a way that reduces memory fragmentation and optimizes performance.
Triple State Algorithm
The classical way of doing Quicksort is as follows:
- Choose one element p. Called pivot. Try to make it close to the median.
- Divide the array into two parts. A lower (left) part that is all less than p. And a higher (right) part that is all greater than p.
- Recursively sort the left and right parts using the same method above.
- Stop recursion when a part reaches a size that can be trivially sorted.
The difference between the various implementations is in how they choose the pivot p, and where equal elements to the pivot are placed. There are several schemes as follows:
[ <=p | ? | >=p ]
[ =p | ? ]
[ <=p | =p | ? | >p ]
[ =p | p ] Then swap = part to middle at the end
[ =p | p | =p ] Then swap = parts to middle at the end
Where the goal (or the ideal goal) of the above schemes (at the end of a recursive stage) is to reach the following:
[ p ]
The above would allow exclusion of the =p part from further recursive calls thus reducing the number of comparisons. However, there is a difficulty in reaching the above scheme with minimal swaps. All previous implementation of Quicksort could not immediately
put =p elements in the middle using minimal swaps, first because p might not be in the perfect middle (i.e. median), second because we don’t know how many elements are in the =p part until we finish the current recursive stage.
The new Triple State method first enters a monitoring state 1 while comparing and swapping. Elements equal to p are immediately copied to the middle if they are not already there, following this scheme:
[ p ]
Then when either the left (<p) part or the right (>p) part meet the middle (=p) part, the algorithm will jump to one of two specialized states. One state handles the case for a relatively small =p part. And the other state handles the case for a relatively
large =p part. This method adapts to the nature of the input array better than the ordinary classical Quicksort.
Further reducing number of swaps
A typical quicksort loop scans from left, then scans from right. Then swaps. As follows:
while (l<=r)
while (ar[l]<p)
l++;
while (ar[r]>p)
r--;
if (l<r)
{ Swap(ar[l],ar[r]);
l++; r--;
else if (l==r)
{ l++; r--; break;
The Swap macro above does three copy operations:
Temp=ar[l]; ar[l]=ar[r]; ar[r]=temp;
There exists another method that will almost eliminate the need for that third temporary variable copy operation. By copying only the first ar[r] that is less than or equal to p, to the temp variable, we create an empty space in the array. Then we proceed scanning
from left to find the first ar[l] that is greater than or equal to p. Then copy ar[r]=ar[l]. Now the empty space is at ar[l]. We scan from right again then copy ar[l]=ar[r] and continue as such. As long as the temp variable hasn’t been copied back to the array,
the empty space will remain there juggling left and right. The following code snippet explains.
// Pre-scan from the right
while (ar[r]>p)
r--;
temp = ar[r];
// Main loop
while (l<r)
while (l<r && ar[l]<p)
l++;
if (l<r) ar[r--] = ar[l];
while (l<r && ar[r]>p)
r--;
if (l<r) ar[l++] = ar[r];
// After loop finishes, copy temp to left side
ar[r] = temp; l++;
if (temp==p) r--;
(For simplicity, the code above does not handle equal values efficiently. Refer to the complete code for the elaborate version).
This method is not new, a similar method has been used before (read: http://www.azillionmonkeys.com/qed/sort.html)
However it has a negative side effect on some common cases like nearly sorted or nearly reversed arrays causing undesirable shifting that renders it less efficient in those cases. However, when used with the Triple State algorithm combined with further common
cases handling, it eventually proves more efficient than the classical swapping approach.
Run time tests
Here are some test results, done on an i5 2.9Ghz with 6Gb of RAM. Sorting a random array of integers. Each test is repeated 5000 times. Times shown in milliseconds.
size std::sort() Triple State QuickSort
5000 2039 1609
6000 2412 1900
7000 2733 2220
8000 2993 2484
9000 3361 2778
10000 3591 3093
It gets even faster when used with other types of input or when the size of each element is large. The following test is done for random large arrays of up to 1000000 elements where each element size is 56 bytes. Test is repeated 25 times.
size std::sort() Triple State QuickSort
100000 1607 424
200000 3165 845
300000 4534 1287
400000 6461 1700
500000 7668 2123
600000 9794 2548
700000 10745 3001
800000 12343 3425
900000 13790 3865
1000000 15663 4348
Further extensive tests has been done following Jon Bentley’s framework of tests for the following input array types:
sawtooth: ar[i] = i % arange
random: ar[i] = GenRand() % arange + 1
stagger: ar[i] = (i* arange + i) % n
plateau: ar[i] = min(i, arange)
shuffle: ar[i] = rand()%arange? (j+=2): (k+=2)
I also add the following two input types, just to add a little torture:
Hill: ar[i] = min(i<(size>>1)? i:size-i,arange);
Organ Pipes: (see full code for details)
Where each case above is sorted then reordered in 6 deferent ways then sorted again after each reorder as follows:
Sorted, reversed, front half reversed, back half reversed, dithered, fort.
Note: GenRand() above is a certified random number generator based on Park-Miller method. This is to avoid any non-uniform behavior in C++ rand().
The complete test results can be found here:
http://solostuff.net/tsqsort/Tests_Percentage_Improvement_VC++.xls
or:
https://docs.google.com/spreadsheets/d/1wxNOAcuWT8CgFfaZzvjoX8x_WpusYQAlg0bXGWlLbzk/edit?usp=sharing
Theoretical Analysis
A Classical Quicksort algorithm performs less than 2n*ln(n) comparisons on the average (check JACEK CICHON’s paper) and less than 0.333n*ln(n) swaps on the average (check Wild and Nebel’s paper). Triple state will perform about the same number of comparisons
but with less swaps of about 0.222n*ln(n) in theory. In practice however, Triple State Quicksort will perform even less comparisons in large arrays because of a new 5 stage pivot selection algorithm that is used. Here is the detailed theoretical analysis:
http://solostuff.net/tsqsort/Asymptotic_analysis_of_Triple_State_Quicksort.pdf
Using SSE2 instruction set
SSE2 uses the 128bit sized XMM registers that can do memory copy operations in parallel since there are 8 registers of them. SSE2 is primarily used in speeding up copying large memory blocks in real-time graphics demanding applications.
In order to use SSE2, copied memory blocks have to be 16byte aligned. Triple State Quicksort will automatically detect if element size and the array starting address are 16byte aligned and if so, will switch to using SSE2 instructions for extra speedup. This
decision is made only once when the function is called so it has minor overhead.
Few other notes
- The standard C++ sorting function in almost all platforms religiously takes a “call back pointer” to a comparison function that the user/programmer provides. This is obviously for flexibility and to allow closed sourced libraries. Triple State
defaults to using a call back function. However, call back functions have bad overhead when called millions of times. Using inline/operator or macro based comparisons will greatly improve performance. An improvement of about 30% to 40% can be expected. Thus,
I seriously advise against using a call back function when ever possible. You can disable the call back function in my code by #undefining CALL_BACK precompiler directive.
- Like most other efficient implementations, Triple State switches to insertion sort for tiny arrays, whenever the size of a sub-part of the array is less than TINY_THRESH directive. This threshold is empirically chosen. I set it to 15. Increasing this
threshold will improve the speed when sorting nearly sorted and reversed arrays, or arrays that are concatenations of both cases (which are common). But will slow down sorting random or other types of arrays. To remedy this, I provide a dual threshold method
that can be enabled by #defining DUAL_THRESH directive. Once enabled, another threshold TINY_THRESH2 will be used which should be set lower than TINY_THRESH. I set it to 9. The algorithm is able to “guess” if the array or sub part of the array is already sorted
or reversed, and if so will use TINY_THRESH as it’s threshold, otherwise it will use the smaller threshold TINY_THRESH2. Notice that the “guessing” here is NOT fool proof, it can miss. So set both thresholds wisely.
- You can #define the RANDOM_SAMPLES precompiler directive to add randomness to the pivoting system to lower the chances of the worst case happening at a minor performance hit.
-When element size is very large (320 bytes or more). The function/algorithm uses a new “late swapping” method. This will auto create an internal array of pointers, sort the pointers array, then swap the original array elements to sorted order using minimal
swaps for a maximum of n/2 swaps. You can change the 320 bytes threshold with the LATE_SWAP_THRESH directive.
- The function provided here is optimized to the bone for performance. It is one monolithic piece of complex code that is ugly, and almost unreadable. Sorry about that, but inorder to achieve improved speed, I had to ignore common and good coding standards
a little. I don’t advise anyone to code like this, and I my self don’t. This is really a special case for sorting only. So please don’t trip if you see weird code, most of it have a good reason.
Finally, I would like to present the new function to Microsoft and the community for further investigation and possibly, inclusion in VC++ or any C++ library as a replacement for the sorting function.
You can find the complete VC++ project/code along with a minimal test program here:
http://solostuff.net/tsqsort/
Important: To fairly compare two sorting functions, both should either use or NOT use a call back function. If one uses and another doesn’t, then you will get unfair results, the one that doesn’t use a call back function will most likely win no matter how bad
it is!!
Ammar Muqaddas

Thanks for your interest.
Excuse my ignorance as I'm not sure what you meant by "1 of 5" optimization. Did you mean median of 5 ?
Regarding swapping pointers, yes it is common sense and rather common among programmers to swap pointers instead of swapping large data types, at the small price of indirect access to the actual data through the pointers.
However, there is a rather unobvious and quite terrible side effect of using this trick. After the pointer array is sorted, sequential (sorted) access to the actual data throughout the remaining of the program will suffer heavily because of cache misses.
Memory is being accessed randomly because the pointers still point to the unsorted data causing many many cache misses, which will render the program itself slow, although the sort was fast!!.
Multi-threaded qsort is a good idea in principle and easy to implement obviously because qsort itself is recursive. The thing is Multi-threaded qsort is actually just stealing CPU time from other cores that might be busy running other apps, this might slow
down other apps, which might not be ideal for servers. The thing researchers usually try to do is to do the improvement in the algorithm it self.
I Will try to look at your sorting code, lets see if I can compile it.

Help!Cache status of object for Central Adapter Engine is incorrect

this problem cconfused me several days!
version:PI 7.1
after i activate the communication channel, the cache not update for central adapter engine
problem: in cache status overview, the update for central adapter engine not yet started, but notification is ok.
the update for integration server and mapping run time are all correct.
then when i display wsdl for sender agreement(SOAP sender), show message:Cache status of object abcd123 for Central Adapter Engine is incorrect
if i ignore this message, error message popup:dapter Engine af.xid.sapittest for communication channel abcd123 not registered in SLD
who can help me solve this problem.
thank you in advance.

Hi cheng,
Kindly check if you have set theparameter 'com.sap.aii.connect.integrationserver.sld.name' in your
Exchange Profile, since it's not set by default. Open note #1278563 and follow the procedures.
And you may check the following notes:
#1031321 - Self-Registration of Adapter Engine and RWB fails
#1334053 - No automatic PI 7.10 SLD Registration (Here you'll see the note 764176 which you have already applied and also the note #1117249).
In RWB, is the adapter Engine "red light"? If yes, what is the specific error?
Regards,
Caio Cagnani

IWAY Adapter(siebel): Error while using Applicaiton Explorer

Hi,
I tried configuring iway adapter(Siebel) for XI to connect to Siebel system.
Steps followed
Deployed iWay Connector for XI, JCA TestTool and Deployed Application Explorer.
Configured iWay business service engine (File Repository).
When I use Application explorer and create a New Siebel target and try to connect, if get the error Problem activating adapter. I found the following in Error logs.... IWAY55\config\base\log, i found aejca_XXX.log
Mon, 14 Aug 2006 11:00:23.0690 PDT - SAPEngine_Application_Thread[impl:3]_31 [info ] [IWAF JCA] [container] Using default: keystore.type=jks and keystore.password=iwaysoftware
Mon, 14 Aug 2006 11:00:23.0690 PDT - SAPEngine_Application_Thread[impl:3]_31 [info ] [IWAF JCA] [container] Security manager using keystore : /usr/home/xidadm/iWay55/config/base/security/keystore.jks
Mon, 14 Aug 2006 11:00:23.0695 PDT - SAPEngine_Application_Thread[impl:3]_31 [warn ] [IWAF JCA] [container] Security manager will not be available due to problem.
java.lang.IllegalStateException: Problem loading keystore: java.io.FileNotFoundException: /usr/home/xidadm/iWay55/config/base/security/keystore.jks (No such file or directory); make sure the password is correct
at com.iwaysoftware.security.KeyStoreUtil.getKeyStore(KeyStoreUtil.java:39)
at com.ibi.adapters.util.security.SecurityManagerImpl.<init>(SecurityManagerImpl.java:45)
at com.iwaysoftware.af.container.IWAFFactory.buildSecurityManager(IWAFFactory.java:209)
at com.iwaysoftware.af.container.IWAFContainer.start(IWAFContainer.java:169)
at com.ibi.afjca.spi.IWAFManagedConnectionFactory.getContainer(IWAFManagedConnectionFactory.java:492)
at com.ibi.afjca.spi.IWAFManagedConnectionFactory.createManagedConnection(IWAFManagedConnectionFactory.java:206)
at com.ibi.afjca.spi.IWAFConnectionManager.allocateConnection(IWAFConnectionManager.java:31)
Is a keystore file mandatory..? It dosen't get created during standard installation. do we have to create it manually..?
Regards,
siva

Hi Siva,
Plz check whether you kept the correct JAR files(drivers) related to siebel in the lib folder of the iWay installation directory.
And also check whether you have given the iWay root directory path during creating configuration in Application explorer

SAP SWIFT as replacement for IWAY adapter

Similar Messages

Maybe you are looking for