SAP Sybase ASE 15.7 DB error on Windows 2008 R2 Server

Hello SAP Gurus !
We are in process of Installing SAP ASE 15.7 DB on win 2008 R2 64bit. When i Run setup file on ASE folder and after following the required screen at the last phase it comes out throwing error saying New Adaptive service unable to create?.
We tried all the options but no luck, Can anyone in this group help me out of it, Your early reply really appreciated.
Thanks -
Amjad

Hi Amjad,
Please check whether below components are installed on Windows sever.
Microsoft Visual C++ 2010 Service Pack 1 Redistributable Package and KB2565063
Microsoft Visual Studio 2010 Service Pack 1 and KB2565057
If not please do so and check the results.
Secondly which path level of ASE do you have ?
You may refer some known installation issues on link
SyBooks Online
Hope this helps.
Regards,
Deepak Kori

Similar Messages

Sap Sybase ASE runtime edition

Hi All,
I would like to know what is "sap sybase ase runtime edition" and what are the advantages and disadvantages of this database edition. Is this a complete Sybase database?

Hello Nick,
Thank you for posting your inquiry based upon the support incident you had opened.
>>
I'm asking if with an upgrade of software(ASE) can the license for SYSAM be refreshed or do it have to be checked in and re-created. There was a check box on the old Sybase system to refresh a license for an upgrade of software I would like to know if that still exists.
<<
The license generation tool (interface) on SAP's Support Portal (ServiceMarketPlace) is very similar to the previous Sybase Product Download Center.
If a license file needs to be updated (refreshed), you can do this using the 'Upgrade' button.
Otherwise, check-in, then generate new one can resolve the issue.
Keys | SAP Support Portal
>> Request Key from Install
>> enter/select desired Installation Number
>> select Sybase Entitlement Overview (View, Check-in, Update previously generated SySAM 2.0 licenses)
>> find your license and then select the 'Upgrade' button.
>> download license.
side note: a related subject 'date-based versioning' in SySAM guide
Working with Date-Based Versioning
-Michael

Moving SAP Content Server/MaxDB 7.6 to a Windows 2008 R2 Server

Hi All.
We are in the process of upgrading our server where the SAP content server is located. We are going from SAP CS 6.30/MaxDB 7.6 to a Windows 2008 R2 server where we want to install SAP CS 6.40/MaxDB 7.8. I have been following the latest manual from SAP for upgrading to MaxDb 7.8 (2010-10-05) from MaxDb 7.6 using the in-place method.
To date we have installed MaxDB 7.6 on the server. We restored our latest backup and performed the index checks as spelled out in the manual. I have the database in ADMIN mode and went to run the MaxDb 7.8 install for the 64 bit window version. THe install GUI comes up, but the Update selection is grayed out. This tells me that the install program can not detect our existing database. I did make sure I was running the install as Admim so I do not think that is the issue.
This is the second time I have tried this upgrade. The first time I did a comand line upgrade by runing the .bat file DBUPDATE.bat. We have a 110 Gbyte database and this upgrade ran in about 15 minutes, and of course when I went to openthe database it was toast. Do not want to make the same mistake again.
One other point, since we did a restore of the database, then the index check, we did not run a backup as the manual suggested as we felt it was not necessary. Does the system require a backup before upgrade and that is why it does not see the database?
Any assistance will be greatly appreciated.

I beleive we have resolved the issue with upgrading the database, but now we are having a problem with Datbase Studio 7.8. Before the upgrade we used Data Manager 7.6. After the upgrade we installed Database Studio 7.8 and when we go to start it up, we are getting the Problems opening perspective 'com.sap.sdb.tools.ut.perspectives.mainPerspective'. I followed the instruction in another post Problems opening perspective in Database Studio, but we still are getting the error.
Can anybody offer any assistance as we are getting close to the weekend when we want to do the cutover and we are not even done with our first pass at upgrading the SAP content server.
Thanks
John

BO XI 3.1 SP2 error while installing in Windows 2008 ENT Server 32 Bit

Hi
We have windows 2008 enterprise edition 32 Bit SP2 , While installing BO 3.1 SP2 we are getting the following error.
"Some files could not be created.
Please close all applications, reboot Windows and restart this installation."
1.we do have enough space as well as we are installing it through administrator account.
2.I increase the virtual memory size from 2 GB to 4 GB, still same error.
3.we downloaded the software in two diffrent machines. We tried extracting the "exe" file in two machine but still getting the same error.
4.We dont have any firewall connected and windows firewall is off.
Is there BO 3.1 Sp2 is available for windows 2008 ent server 32-Bit?
Because In the download site there is Windows Server on IA32 32-bit.
is it the correct version?
Please help us to solve this problem
Thanks

We have opened a ticket for this. After subsequent discussion with the forum support person we have installed BO Enterprise 3.1 SP2 fixed pack 2.5 on the server (Windows Server 2008 SP2). On the client side, we have also installed BO Enterprise 3.1 SP2 fixed pack 2.5 and Live Office SP2 fixed pack 2.5.
Once we tried to use the Web Intelligence document based on OLAP Universe in excel through Live Office it gives the following error.
"Failed to get the document information. (LO 26315) A database error occured. The database error text is: Failed to set properties (The component Microsoft® OLE DB Provider for Analysis Services returned server error (Database 'Sales' does not exist.)). (WIS 10901)(6315)".

Oracle 11g ODAC 11.1.0.6.21 on Windows 2008 Standard server gives TNS error

Hi,
I have Oracle 11g ODAC 11.1.0.6.21 installed on my Application server that has 32 bit Windows 2008 Standard. The Oracle database 10g is installed on another 2008 server. On database server I can connect using SQLPlus. But on application server I cannot connect using ODAC SQLPlus. I have given correct service name in tnsnames.ora file.
Error is ORA-12154 TNS: Listener cannot resolve service name
What's wrong? Is 11.1.0.6.21 not meant for Windows 2008? I did not get any errors while installing.
This 11.1.0.6.21 works perfectly for me on XP machine.
I have browsed this forum but not getting clear steps to peform.
Can someone guide me what is needed?
Thanks
Shrini

Hi,
The request to connect from the client is reaching the server but it seems the parsing of the service name is either wrong or the information is correct. Here are a couple of suggestions.
If you have a good known set of sqlnet.ora and tnsnames.ora files on another client where the same connection descriptor works, then backup the curreny client network config files and copy the good known files to the Windows 2008 web server where you see the error. Make sure you recycle the worker processes once the files have been copied.
Try to connect via Ezconnect and by pass the config files to see if you get the same error.
//hostname:port/servicenameofdb
where hostname is the machine where the target database is running
port is the port on the DB machine where the tns listener is running and listening
service name is the service name of the target DB
Use this syntax in the connect string box when attempting to connect from SQL PLUS out of the ODAC home.
You can also run lsnrctl utility on the server and vertify there is a handler for the service name or instance that is the target,
HTH
Jenny B.

WMI __SystemSecurity class GetSecurityDescriptor method reports error 0x8004101d Unexpected error on Windows 2008 R2 for WMI namespace "\root\cimv2"

WMI __SystemSecurity class GetSecurityDescriptor method reports error 0x8004101d Unexpected error on Windows
2008 R2 for WMI namespace "\root\cimv2"
On Windows 2008 and Windows 2012 R2 GetSecurityDescriptor works fine.
Thanks,
Sandygg
Dev

Hi Anna,
No event getting generated under Application / Security, but following event was reported under Microsoft-Windows-WMI-Activity/Operational
log.
Id = {01EAEC48-F800-0001-5A81-6ADB7E6CD001}; ClientMachine =
sever2008r2; User
= sever2008r2\user;
ClientProcessId = 12580; Component = Unknown; Operation = Start IWbemServices::ExecMethod - root\cimv2 : __SystemSecurity::GetSecurityDescriptor; ResultCode = 0x8004101d; PossibleCause = Unknown
Will let you about WMI Diagnosis tool result.
Thanks,
Sandy
Dev

SAP support Windows 2008 x64 server

Hi,
SAP 2007 supports the Windows 2008 x64 server? If support, what I need to do to run the sap add on at this Server.
Please give me any suggestiong.
Thanks and regards,
Lei Nandar Myint

Hi,
You may check this link: https://websmp203.sap-ag.de/smb/sbo/platforms (S-Number logon)
Regards, Yatsea

Oracle to SAP Sybase ASE Migration

Hi
We are planing to migrate Solution Manger 7.1.
Source : OS- HP-UX , DB - Oracle 11g
Target : OS - SUSE Linux , DB - SYBASE ASE 15.7
Can we migrate using normal system copy method ( heterogeneous) using SPM toool or is there any specific procedure/ steps need to follow ?
Thanks
Shashi

Hi Shashi,
You need to use SWPM tool and Heterogenous system copy to perform this migration.
You may need to read some notes related to Sybase as mentioned below
1734039 - SYB: Migration to Sybase ASE using unsorted unload/load
1680803 - SYB: Migration to SAP Adaptive Server Enterprise - Best Practice
1772967 - FAQ - Important SAP Notes - Sybase ASE
Hope this helps.
Regards,
Deepak Kori

SAP Sybase ASE Cluster Edition replication

Hi Friends,
I need to know that whether Sybase Replication server supports replication to/from Sybase ASE Cluster Edtion? If So any "how to" document link would be much appreciated.
Appreciate your answer at the earliest.
Nishar

Take a look at the Repserver Admininstration Guide Volume 1, Chapter "Manage RepAgent and Support Adaptive Server", Subsection "Adaptive Server Shared-disk Cluster Support".

Migration of SAP Business Objects BI Platform 4.1 from Windows(OS), SQL Server(DB) to AIX(OS) and Oracle(DB).

Dear All,
I have SAP Business Objects BI Platform 4.1 running on window servers and sql server database. We want to migrate this to AIX and oracle.
Can you please share what should be the best approach to carry on this migration?
Regards,
Asleh

Hi Mohammed,
Regarding your Query below is the suggestion:
Step I: Preparing for moving BOBJ application from Windows to AIX
There are some tasks that you need to perform:
To configure the existing deployment
Perform inventory and cleanup, to ensure that only the required content is moved.
Run the Repository Diagnostic Tool to detect any inconsistencies between the File Repository and the CMS repository. The upgrade management tool will not run successfully if there are inconsistencies between the File Repository and the CMS repository.
Identify any content that the upgrade management tool can't upgrade, along with the process required to upgrade that content. There is some content like Voyager Workspaces or Desktop Intelligence documents that require manual intervention before running the upgrade management tool.
Back up existing repositories, including the system database and the Input and Output File Repository Servers.
Back up custom web applications, HTML pages, and scripts in your existing deployment.
To configure the planned BI 4.x deployment
Setup and configure the Middleware and ODBC connections.
Ensure that your machines meet the deployment system's requirements, you can find information about the supported platforms in the Platform Availability Matrix (PAM) http://service.sap.com/support -> Help and Support -> SAP BusinessObjects Support -> Documentation -> Supported Platform s/PARs -> SAP BusinessObjects BI 4.x
Step II:
You can use database backup & FRS backup (Offline) in new environment (AIX) to deploy BOBJ 4.x Version
Take the help of DBA to move CMS & AUDIT database backup from SQL Server (Windows) to Oracle (AIX)
Test the Universe,reports, Check the rights
Step III:
If you are configured any SSO then make sure that same configuration is deployed in new environment (AIX).
Test the user SSO in new environment (AIX).
Or
You can also use Promotion manager to move the contenet from Windows (Business Objects Application) to UNIX (Business Objects Application)
Only prerequisite is Business Objects Application version should be same.
You can copy content only 50 Object at a time in One Job
FRS Offline backup is required.
Necessary files regarding custom web applications, HTML pages, and scripts in your existing deployment.
Please refer the below KBA for more details
BOBJ Deployment Link:
http://wiki.scn.sap.com/wiki/display/BOBJ/Application+Server
BIP on Linux with Tomcat and Sybase ASE Pattern Book
http://wiki.scn.sap.com/wiki/display/BOBJ/BIP+on+Linux+with+Tomcat+and+Sybase+ASE+Pattern+Book
Installing SAP BI 4.1 SP01 on Red Hat Enterprise Linux 6.x Step-by-step
http://scn.sap.com/community/bi-platform/blog/2013/11/06/installing-sap-bi-41-sp01-on-red-hat-enterprise-linux-6x-step-by-step
Promotion Manager KBA:
http://wiki.scn.sap.com/wiki/display/BOBJ/BI4+Upgrade+and+Promotion+Management+KBAs
Hope this will help!!!!
Thanks,
Daya

Oracle 10g Installation Error on Windows 2008 server

Hi Experts,
I have tried to install Oracle 10g via "51036975 ORACLE 10.2.0.4 Failsafe Server 3.4.1.5 Windows 2008" as per note no. Note 1303262 - Oracle on Windows Server 2008. Server is 64 bit server.
Oracle service is not getting started and showing as "starting" in services.msc. I cant stop the service. I have taken the restart of the server as well but no luck.
Just before the end of installation of Oracle, one pop up box named isqlplussvc opened up stating as "Failed to start the service, Error:0, the operation completed successfully".
Can you please suggest how to handle this error and start the service?
Regards,
Naresh.

Hi All,
Yes, I started with Failsafe server CD only. After trying installing Oracle couple of times, once the service didnt went into starting mode & it couldnt start as well. Then I started going ahead with SAP installation and later I found that the service got automatically started.
I was under the impression that the service has to be started before going for SAP installation.
Thanks all for your replies.
Regards,
Naresh.

10g BI publisher installation getting error in windows 2008 R2 64bit

HI Friends,
I am trying to install the 10.1.3.4.1. and 10.1.3.4.2 in the windows 2008 R2 64bit server.
At the running the setup.exe file its checking and getting passed in the pre-requites.
And its not opening the installer graphical utility instead of that its showing an error like
"setup.exe has stopped working
windows can check online solution of the problem
close the program"
I have downloaded the software from the following location in the OTN,
http://www.oracle.com/technetwork/middleware/bi-publisher/downloads/index.html
http://www.oracle.com/technetwork/middleware/bi-publisher/downloads/index.htmlBI Publisher 10.1.3.4.2 for Windows (32/64 bit) (1 GB)
http://www.oracle.com/technetwork/middleware/bi-publisher/downloads/index.htmlBI Publisher 10.1.3.4.1 for Windows x86 (765 MB)
Please suggests us to move further..
Awaiting for the reply.
Regards
Kumar

Hi
1. Installed RCU first see the link bleow
http://lamont-consulting.com/index.php/blog/obiee/11g/107-obiee-11g-rcu-install
The RCU will communicate with OBIEE
when you install obiee some information needed regarding the RCU.
2. Installed OBIEE see the link below
http://allaboutobiee.blogspot.com/2012/04/obiee-111160-step-by-step-installation.html
i have 3 machines
1. I have windows server 2008 64bit, Oracle Database 11g installed
2. I have windows server 2003 32 bit, RCU and OBIEE installed
3. I have windows XP SP3 32 bit, OBIEE desktop installed.
i hope the above links will help you.
if you have any queries, get back to me .. .

Windows 2008 r2 server - chkdsk loop - An unspecified error occurred (696e647863686b2e dee)

Hi,
One of our main windows 2008 r2 file servers (HP Proliant ML350 G6) seems to have a dirty d: drive.
After every reboot, chkdsk runs on drive "d:" and stops with an unspecified error
(696e647863686b2e dee) when checking indexes. After the error it continues to boot and start normally into windows. The d: drive looks ok, but when I run chkdsk in windows the chkdsk runs and stops at the same point without
warning or anything else. The gui stops and exits, period. No message nothing.
When I check the d: drive with "fsutil dirty query d:", the disk is marked as "dirty" ....
The HP advanced Proliant diagnostic tools did not show any problems with the hardisks, I'm running latest HP drivers and firmwares on the server. Last but not least I don't have any special warnings/errors etc in the event viewer.
Here is the output of chkdsk f.ex. in safe mode I did a few hours ago, the output/error is always identical:
C:\>chkdsk d: /R /F /X
The type of the file system is NTFS.
Volume label is DATA.
CHKDSK is verifying files (stage 1 of 5)...
184832 file records processed.
File verification completed.
15624 large file records processed.
0 bad file records processed.
0 EA records processed.
5 reparse records processed.
CHKDSK is verifying indexes (stage 2 of 5)...
10 percent complete. (182686 of 212928 index entries processed)
An unspecified error occurred (696e647863686b2e dee).
As of now, I have disabled the boot-time check on drive d: (with "chkntfs d: /x"), but I would prefer to restore it when the problem is fixed.
I tried a lot of chkdsk and safe mode combinations, nothing helped. I don't have any clues ... so your help is really welcome.
Thanks a lot!
KInd regards,
Didier

Hi,
There are multiple cause for the issue such as an improper shutdown sequence, or a more serious hardware problem that can indicate a failing drive.
On NTFS volumes, the dirty bit is typically set only if the file system has detected potential corruption. In this case, an event is logged in the System event log. Please check the System event log for more information.
Please refer to this kb article for more and detail information:
http://support.microsoft.com/kb/322275/en-us
Meanwhile, I am not sure if this is a harddisk issue, so i would suggest you could ask for the HP support.
Thanks for your understanding.
Regards.
If you have any feedback on our support, please click
here
Vivian Wang

Sap SAP EHP5 ERP 6 ides installtion procedure on windows 2008

Dear friends,
                I have download   SAP EHP5 ERP 6 ides . I have extracted 51041427_1
IDES Installation Master BS7i2010 1 of 3 . i am runnning setting now on xp for testing master installtion but it shows only software Life cycle option under Enhancement package 5 for sap ERP 6.0.
Please send me step for installtion on windows 2008 and linux .I have downloaded following files
Add to Download Basket
Maintain Download Basket
Select All
Deselect All
The following objects are available for download:
           File Type     Download Object     Title     Info File     File Size [kb]     Last Changed
          EXE     50102777_1
SAP NW 7.0 EHP2 SPS06 Onl. Doc. 1 of 3      Info
976563     30.11.2010
          RAR     50102777_2
SAP NW 7.0 EHP2 SPS06 Onl. Doc. 2 of 3      Info
976563     30.11.2010
          RAR     50102777_3
SAP NW 7.0 EHP2 SPS06 Onl. Doc. 3 of 3      Info
98179     30.11.2010
          EXE     50105433_1
ODoc. SAP EHP5 ERP 6.0 incl. EHP2-4 1 of 14      Info
976563     06.07.2011
          RAR     50105433_10
ODoc. SAP EHP5 ERP 6.0 incl. EHP2-4 10 of 14      Info
976563     26.05.2011
          RAR     50105433_11
ODoc. SAP EHP5 ERP 6.0 incl. EHP2-4 11 of 14      Info
976563     26.05.2011
          RAR     50105433_12
ODoc. SAP EHP5 ERP 6.0 incl. EHP2-4 12 of 14      Info
976563     26.05.2011
          RAR     50105433_13
ODoc. SAP EHP5 ERP 6.0 incl. EHP2-4 13 of 14      Info
976563     26.05.2011
          RAR     50105433_14
ODoc. SAP EHP5 ERP 6.0 incl. EHP2-4 14 of 14      Info
110192     26.05.2011
          RAR     50105433_2
ODoc. SAP EHP5 ERP 6.0 incl. EHP2-4 2 of 14      Info
976563     06.07.2011
          RAR     50105433_3
ODoc. SAP EHP5 ERP 6.0 incl. EHP2-4 3 of 14      Info
976563     25.05.2011
          RAR     50105433_4
ODoc. SAP EHP5 ERP 6.0 incl. EHP2-4 4 of 14      Info
976563     25.05.2011
          RAR     50105433_5
ODoc. SAP EHP5 ERP 6.0 incl. EHP2-4 5 of 14      Info
976563     25.05.2011
          RAR     50105433_6
ODoc. SAP EHP5 ERP 6.0 incl. EHP2-4 6 of 14      Info
976563     25.05.2011
          RAR     50105433_7
ODoc. SAP EHP5 ERP 6.0 incl. EHP2-4 7 of 14      Info
976563     25.05.2011
          RAR     50105433_8
ODoc. SAP EHP5 ERP 6.0 incl. EHP2-4 8 of 14      Info
976563     26.05.2011
          RAR     50105433_9
ODoc. SAP EHP5 ERP 6.0 incl. EHP2-4 9 of 14      Info
976563     26.05.2011
          ZIP     50105790_1
NW 7.0 Presentation - Adobe LiveCycle Designer 8.0      Info
291857     22.06.2011
          ZIP     50105790_2
NW 7.0 Presentation - SAP Content Server 6.40      Info
82014     22.06.2011
          ZIP     50105790_3
NW 7.0 Presentation - MaxDB Release 7.6.03      Info
1817028     22.06.2011
          ZIP     50105790_4
NW 7.0 Presentation - 7.20 Compilation 3 Present. 1/2      Info
778274     22.06.2011
          ZIP     50105790_5
NW 7.0 Presentation - 7.20 Compilation 3 Present. 2/2      Info
163493     22.06.2011
          ZIP     50105790_6
NW 7.0 Presentation - Server Components Compilation 3      Info
519195     22.06.2011
          EXE     51031678_1
ORACLE RDBMS 10.2 Windows 1 of 5      Info
683594     24.04.2006
          RAR     51031678_2
ORACLE RDBMS 10.2 Windows 2 of 5      Info
683594     24.04.2006
          RAR     51031678_3
ORACLE RDBMS 10.2 Windows 3 of 5      Info
683594     24.04.2006
          RAR     51031678_4
ORACLE RDBMS 10.2 Windows 4 of 5      Info
683594     24.04.2006
          RAR     51031678_5
ORACLE RDBMS 10.2 Windows 5 of 5      Info
48538     24.04.2006
          ZIP     51031687
DVD Oracle 10.2 Rel. 2 Document. Library      Info
456260     28.03.2006
          ZIP     51036971_1
ORACLE RDBMS Patch 10.2.0.4 TRU64 64bit      Info
1491284     12.05.2009
          ZIP     51036971_2
ORACLE RDBMS Patch 10.2.0.4 Windows Server on IA32 32bit      Info
1010414     12.05.2009
          ZIP     51036971_3
ORACLE RDBMS Patch 10.2.0.4 Windows Server on IA64 64bit      Info
1340047     12.05.2009
          ZIP     51036971_4
ORACLE RDBMS Patch 10.2.0.4 Windows Server on x64 64bit      Info
1097041     12.05.2009
          ZIP     51036975
ORACLE 10.2.0.4 Failsafe Server 3.4.1.5 Windows 2008      Info
1094024     06.04.2009
          EXE     51037295_1
NW 7.0 EHP2 Search/Class (TREX 7.10) 1 of 3      Info
976563     13.04.2010
          RAR     51037295_2
NW 7.0 EHP2 Search/Class (TREX 7.10) 2 of 3      Info
976563     13.04.2010
          RAR     51037295_3
NW 7.0 EHP2 Search/Class (TREX 7.10) 3 of 3      Info
228836     13.04.2010
          EXE     51039100_1
BS7i2010 Java Components 1 of 4      Info
976563     30.06.2010
          RAR     51039100_2
BS7i2010 Java Components 2 of 4      Info
976563     30.06.2010
          RAR     51039100_3
BS7i2010 Java Components 3 of 4      Info
976563     30.06.2010
          RAR     51039100_4
BS7i2010 Java Components 4 of 4      Info
664469     30.06.2010
          ZIP     51039101
ERP 6.0 EHP5 Components      Info
922196     06.07.2011
          ZIP     51039102_1
BS7i2010 Kernel 7.20 AIX 64bit      Info
590019     03.07.2010
          ZIP     51039102_10
BS7i2010 UC-Kernel 7.20 Solaris on SPARC 64bit      Info
566167     03.07.2010
          ZIP     51039102_11
BS7i2010 Kernel 7.20 Solaris on x64 64bit      Info
501169     03.07.2010
          ZIP     51039102_12
BS7i2010 UC-Kernel 7.20 Solaris on x64 64bit      Info
501962     03.07.2010
          ZIP     51039102_13
SL CONTROLLER 700      Info
21599     03.07.2010
          ZIP     51039102_14
SL CONTROLLER 720      Info
36022     03.07.2010
          ZIP     51039102_2
BS7i2010 UC-Kernel 7.20 AIX 64bit      Info
592128     03.07.2010
          ZIP     51039102_3
BS7i2010 Kernel 7.20 HP-UX on IA64 64bit      Info
964576     03.07.2010
          ZIP     51039102_4
BS7i2010 UC-Kernel 7.20 HP-UX on IA64 64bit      Info
961623     03.07.2010
          ZIP     51039102_5
BS7i2010 Kernel 7.20 HP-UX on PA-RISC 64bit      Info
637490     03.07.2010
          ZIP     51039102_6
BS7i2010 UC-Kernel 7.20 HP-UX on PA-RISC 64bit      Info
645928     03.07.2010
          ZIP     51039102_7
BS7i2010 Kernel 7.20 z/OS 64bit      Info
152648     03.07.2010
          ZIP     51039102_8
BS7i2010 UC-Kernel 7.20 z/OS 64bit      Info
149115     03.07.2010
          ZIP     51039102_9
BS7i2010 Kernel 7.20 Solaris on SPARC 64bit      Info
563911     03.07.2010
          ZIP     51039103_1
BS7i2010 Kernel 7.20 Linux on IA32 32bit      Info
581392     03.07.2010
          ZIP     51039103_10
BS7i2010 UC-Kernel 7.20 Linux on x86_64 64bit      Info
618836     03.07.2010
          ZIP     51039103_11
SL CONTROLLER 700      Info
21599     03.07.2010
          ZIP     51039103_12
SL CONTROLLER 720      Info
36022     03.07.2010
          ZIP     51039103_2
BS7i2010 UC-Kernel 7.20 Linux on IA32 32bit      Info
585075     03.07.2010
          ZIP     51039103_3
BS7i2010 Kernel 7.20 Linux on IA64 64bit      Info
741248     03.07.2010
          ZIP     51039103_4
BS7i2010 UC-Kernel 7.20 Linux on IA64 64bit      Info
754754     03.07.2010
          ZIP     51039103_5
BS7i2010 Kernel 7.20 Linux on Power 64bit      Info
655006     03.07.2010
          ZIP     51039103_6
BS7i2010 UC-Kernel 7.20 Linux on Power 64bit      Info
690204     03.07.2010
          ZIP     51039103_7
BS7i2010 Kernel 7.20 Linux on zSeries 64bit      Info
563408     03.07.2010
          ZIP     51039103_8
BS7i2010 UC-Kernel 7.20 Linux on zSeries 64bit      Info
580159     03.07.2010
          ZIP     51039103_9
BS7i2010 Kernel 7.20 Linux on x86_64 64bit      Info
601555     03.07.2010
          ZIP     51039352_1
BS7i2010 Kernel 7.20 OS/400      Info
788314     09.10.2010
          ZIP     51039352_10
SL CONTROLLER 720      Info
65806     09.10.2010
          ZIP     51039352_2
BS7i2010 UC-Kernel 7.20 OS/400      Info
792616     09.10.2010
          ZIP     51039352_3
BS7i2010 Kernel 7.20 Windows Server on IA32 32bit      Info
608384     09.10.2010
          ZIP     51039352_4
BS7i2010 UC-Kernel 7.20 Windows Server on IA32 32bit      Info
617236     09.10.2010
          ZIP     51039352_5
BS7i2010 Kernel 7.20 Windows Server on IA64 64bit      Info
795354     09.10.2010
          ZIP     51039352_6
BS7i2010 UC-Kernel 7.20 Windows Server on IA64 64bit      Info
805079     09.10.2010
          ZIP     51039352_7
BS7i2010 Kernel 7.20 Windows Server on x64 64bit      Info
652968     09.10.2010
          ZIP     51039352_8
BS7i2010 UC-Kernel 7.20 Windows Server on x64 64bit      Info
663848     09.10.2010
          ZIP     51039352_9
SL CONTROLLER 700      Info
21610     09.10.2010
          ZIP     51039412
ORACLE Client V5 10.2.0.4      Info
538178     06.07.2011
          EXE     51041419_1
IDES SAP ERP 6.0 EHP5 Inst. Export 1 of 32      Info
976563     27.07.2011
          RAR     51041419_10
IDES SAP ERP 6.0 EHP5 Inst. Export 10 of 32      Info
976563     27.07.2011
          RAR     51041419_11
IDES SAP ERP 6.0 EHP5 Inst. Export 11 of 32      Info
976563     27.07.2011
          RAR     51041419_12
IDES SAP ERP 6.0 EHP5 Inst. Export 12 of 32      Info
976563     27.07.2011
          RAR     51041419_13
IDES SAP ERP 6.0 EHP5 Inst. Export 13 of 32      Info
976563     27.07.2011
          RAR     51041419_14
IDES SAP ERP 6.0 EHP5 Inst. Export 14 of 32      Info
976563     27.07.2011
          RAR     51041419_15
IDES SAP ERP 6.0 EHP5 Inst. Export 15 of 32      Info
976563     27.07.2011
          RAR     51041419_16
IDES SAP ERP 6.0 EHP5 Inst. Export 16 of 32      Info
976563     27.07.2011
          RAR     51041419_17
IDES SAP ERP 6.0 EHP5 Inst. Export 17 of 32      Info
976563     27.07.2011
          RAR     51041419_18
IDES SAP ERP 6.0 EHP5 Inst. Export 18 of 32      Info
976563     27.07.2011
          RAR     51041419_19
IDES SAP ERP 6.0 EHP5 Inst. Export 19 of 32      Info
976563     27.07.2011
          RAR     51041419_2
IDES SAP ERP 6.0 EHP5 Inst. Export 2 of 32      Info
976563     27.07.2011
          RAR     51041419_20
IDES SAP ERP 6.0 EHP5 Inst. Export 20 of 32      Info
976563     27.07.2011
          RAR     51041419_21
IDES SAP ERP 6.0 EHP5 Inst. Export 21 of 32      Info
976563     27.07.2011
          RAR     51041419_22
IDES SAP ERP 6.0 EHP5 Inst. Export 22 of 32      Info
976563     27.07.2011
          RAR     51041419_23
IDES SAP ERP 6.0 EHP5 Inst. Export 23 of 32      Info
976563     27.07.2011
          RAR     51041419_24
IDES SAP ERP 6.0 EHP5 Inst. Export 24 of 32      Info
976563     27.07.2011
          RAR     51041419_25
IDES SAP ERP 6.0 EHP5 Inst. Export 25 of 32      Info
976563     27.07.2011
          RAR     51041419_26
IDES SAP ERP 6.0 EHP5 Inst. Export 26 of 32      Info
976563     27.07.2011
          RAR     51041419_27
IDES SAP ERP 6.0 EHP5 Inst. Export 27 of 32      Info
976563     27.07.2011
          RAR     51041419_28
IDES SAP ERP 6.0 EHP5 Inst. Export 28 of 32      Info
976563     27.07.2011
          RAR     51041419_29
IDES SAP ERP 6.0 EHP5 Inst. Export 29 of 32      Info
976563     27.07.2011
          RAR     51041419_3
IDES SAP ERP 6.0 EHP5 Inst. Export 3 of 32      Info
976563     27.07.2011
          RAR     51041419_30
IDES SAP ERP 6.0 EHP5 Inst. Export 30 of 32      Info
976563     27.07.2011
          RAR     51041419_31
IDES SAP ERP 6.0 EHP5 Inst. Export 31 of 32      Info
976563     27.07.2011
          RAR     51041419_32
IDES SAP ERP 6.0 EHP5 Inst. Export 32 of 32      Info
553197     27.07.2011
          RAR     51041419_4
IDES SAP ERP 6.0 EHP5 Inst. Export 4 of 32      Info
976563     27.07.2011
          RAR     51041419_5
IDES SAP ERP 6.0 EHP5 Inst. Export 5 of 32      Info
976563     27.07.2011
          RAR     51041419_6
IDES SAP ERP 6.0 EHP5 Inst. Export 6 of 32      Info
976563     27.07.2011
          RAR     51041419_7
IDES SAP ERP 6.0 EHP5 Inst. Export 7 of 32      Info
976563     27.07.2011
          RAR     51041419_8
IDES SAP ERP 6.0 EHP5 Inst. Export 8 of 32      Info
976563     27.07.2011
          RAR     51041419_9
IDES SAP ERP 6.0 EHP5 Inst. Export 9 of 32      Info
976563     27.07.2011
          EXE     51041427_1
IDES Installation Master BS7i2010 1 of 3      Info
976563     25.07.2011
          RAR     51041427_2
IDES Installation Master BS7i2010 2 of 3      Info
976563     25.07.2011
          RAR     51041427_3
IDES Installation Master BS7i2010 3 of 3      Info
297347     25.07.2011

Hi,
i am runnning setting now on xp for testing master installtion but it shows only software Life cycle option under Enhancement package 5 for sap ERP 6.0
Yes, the installation options in the SAPInst screen depend on the Operating system being used. Win XP is not supported for central system installation and hence you do not see those options. Run the same SAPInst in Windows 2008(R2) you will get the installation options.
Guide are available at http://service.sap.com/instguides -> SAP Business Suite Apps -> SAP ERP -> ERP EhP5 Installation..
Regards,
Srikishan

ORA-12560:TNS:protocol adapter error on windows 2008 server(32 bit) for 10g

Hi Friends,
I am installaing Oracle 10g database on windows 2008 Server(32-bit) and when the Database is getting cretaed and during the database files copying portion it's throwing the error :
ORA-12560: TNS:protocol adapter error
I tried intsllaing 10g software alone and invoked DBCA and again during the database files copying portion it's throwing the same error
what could be the issue?
Regards,
DB

Pl indicate which version of "10g" and which version of Windows 2008 - R1 or R2 ?
HTH
Srini

SAP Sybase ASE 15.7 DB error on Windows 2008 R2 Server

Similar Messages

Maybe you are looking for