SAP system can't start up

Hi Experts,
My company's SAP IDES system can't start up now. Because I use transaction code RZ10 to create an new instance profile.Maybe some parameters are not correct.
What can I do right now?? Any expert can give me some advice??
Thanks a lot in advance.
Best regards,
Villy.Lv.

No crossposting by the way!
SAP system can't start up
Too late I noticed that I could have saved my time...
Edited by: Joe Bo. on Dec 11, 2009 4:13 PM

Similar Messages

SAP system can not start up

The system is SAP IDES 6.0 SR2 on windows 2003.
There is no system entry in SAP MMC.
Another system (NW70 SR2) can startup with command "startsap ..". But the IDES can not.
R3trans -d is OK.
sapstartsrv not work.
Add system in SAP MMC, not work.
I have read several Notes and SDN threads here, but still can't work out.
Thanks.

Hi Shen,
Check that ALL Database services are started and running.
Specially in case of Oracle, Check LISTENER service.
Then try to start SAP again..
Regards.
Rajesh Narkhede

SAP system hang when start the addon.

Dear Expert,
I just upgrade one of the SAP B1 server from 2007A to SAP B1 8.8 PL15, everything going smooth both server and clients.
Except one client (new laptop with Win 7 Pro x86), this laptop fail to start the addon.
Others clients with same specs Win 7 Pro have no problem to start addon.
Addon started manually.
After click start button for that addon, the system hang. If without the addon system working fine.
If anyone have ideas to check much appreciate and thanks in advance.
Regards,
Mat

Hi Bala,
I did try your steps, but no luck. System still hang when start the addon.
But, I can start SAP addon , example i try Screen Painter, and can start successfully. Only our addon cannot start.
I'm not suspect our addon because others client working smooth, even the server also working fine.
I did re-install DIAPI, even re-install SAP client a few time, but still fail to start addon (delete SAP client folder before install).
Any one face this problem?
Regards,
mat
Edited by: Mat Mat on Apr 21, 2011 10:43 AM

SAP System down : not starting up

Hi Folks ,
We are facing a problem.
Our quality system was down .
When I checked ps-ef | grep sap : the processes are running but it is not allowing us to login.
we tried re-starting the system but that didn't worked.
I checked the processes with dpmon cmd , many process are free, still not sure on why it is not allowing us to login.
Need your guidance in moving further
Thanks
Regards
Sandy

Hi Mohit,
I checked all the mount points and they are fine .
Please find the below dev_w0 log
Sat Apr 9 02:13:11 2011
C Logon as OPS$-user to get SAPR3's password
C Connecting as /@QA2 on connection 1 (nls_hdl 0) ... (dbsl 700 151208)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 0 0x1073cf120 0x1073d6c30 0x1073e78
C Starting user session: OCISessionBegin(con_hdl=1, usr='/',svchp=0x10b1de0b0, srvhp=0x1073ea2c8, )
C OCI-call failed with -1=OCI_ERROR
C SQL error 942: 'ORA-00942: table or view does not exist'
C Now '/@QA2' is connected: con_hdl=1, nls_hdl=0, session_id=-1.
C Got SAPR3's password from OPS$-user
C Disconnecting from connection 1 ...
C Closing user session (con_hdl=1,svchp=0x10b1de0b0,usrhp=0x108c3a4d8)
C Now I'm disconnected from ORACLE
C Connecting as SAPR3/<pwd>@QA2 on connection 1 (nls_hdl 0) ... (dbsl 700 151208)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 0 0x1073cf120 0x1073d6c30 0x1073e78
C Starting user session: OCISessionBegin(con_hdl=1, usr=SAPR3/<pwd>, svchp=0x10b1de0b0, srvhp=0x10)
C Now 'SAPR3/<pwd>@QA2' is connected: con_hdl=1, nls_hdl=0, session_id=525.
C DB instance QA2 is running on sapqa2 with ORACLE version 10.2.0.4.0 since JAN 31, 2011, 11:09:13
B Connection 1 opened (DBSL handle 1)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE YES YES NO 000 255 255 20110323 143908 sapqa2
B 000 001 R/3*INACT_PACK 000000227 ACTIVE NO NO NO 004 255 255 20110409 021311 sapqa2
B 000 002 R/3*EXPRESSPOPUP 000000211 DISCONNECTED NO NO NO 000 255 255 20110406 170059 sapqa2
B 000 003 R/3*ABAP_DEBUGGE 000000220 DISCONNECTED NO NO NO 004 255 255 20110408 001610 sapqa2
C
C Sat Apr 9 02:16:06 2011
C CbApplInfoGet() failed! Ignore, but uninstall callback to avoid more erroneous calls
C
C Sat Apr 9 02:31:06 2011
C Disconnecting from connection 1 ...
C Closing user session (con_hdl=1,svchp=0x10b1de0b0,usrhp=0x108c3a4d8)
C Now I'm disconnected from ORACLE
B Disconnected from connection con_da={R/3*INACT_PACK,227,1}
N
N Sat Apr 9 03:01:26 2011
N Ssf_GetOwnCertificate: SsfOpenProfile failed with rc=23
N Ssf_GetOwnCertificate: SsfOpenProfile failed with rc=23
N Ssf_GetOwnCertificate: SsfOpenProfile failed with rc=23
N Ssf_GetOwnCertificate: SsfOpenProfile failed with rc=23
N Ssf_GetOwnCertificate: SsfOpenProfile failed with rc=23
N Ssf_GetOwnCertificate: SsfOpenProfile failed with rc=23
C
C Sat Apr 9 03:44:29 2011
C build_stmt: reallocating stmt buffer: 3072 -> 4074 characters
Let me know if you need any more details

How many SAP Systems can access?

Hi,
As per SAP standards is there any limit of accessing the SAP business Systems thr JCo in Webdynpro Java
Thanks,
Sreeni.

hi,
if your external system don't limit the connection, then there is no limit.
Best regards,
John

Centralised EHS system and users and organisations in multiple SAP systems

Wanted to have your experience/ advice or experience in setting up a centralised EHS system talking to multiple SAP systems and other ERP systems
If the client have sister companies and locations in multiple SAP systems , can we go for a centralised EHS system talking to multiple SAP systems
Is there a concept of application ID in EHS system : If so how EHS system can identify the < to EHS system records to tag the system > , <EHS system Records bound to have different configs for each ERP systems> and < from EHS system records to multiple SAP systems >
Can you list client experiences or roadblocks for this type of design

Hello
the answer to your question is: may be you can use a central EHS system. The reason is: EHS is correlated with MM. A SAP system in which EHS is used without MM makes "not realy" sense. So it is a matter of definition "what is a central EHS system".
EHS it selfs uses SAP standard techniques. That is "ALE" distribution to other SAP systems. The distribution of EHS data top NON SAP systems is possible to via XI (which is the common solution). If you use as the scenario SAP to SAP you must make your that standard EHS customizing is the same on both sides.
Furthermore SAP EHS is a "great" module with several submodules. So regarding each of the potential scenerios you need to check the necessary prerequisites. It ois very common to have EHS PS, DG, HSM in one system and to distribute data via ALE to a different system so that the EHS data can be used "decentral" in the several SAP logistic processes.
In most cases you need to distribute per ALE at least DG master and hazardous substance master.
As a starting point take a look here: http://help.sap.com/erp2005_ehp_05/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm
BASIC Data and Tools => Tools => Distribution of specifications, phrases and reports per ALE.
Hope this helps.
With best regards
C.B.

PI7.11(PI7.1 EHP1) sapcpe.exe can not start after upgrade tokenerl patch65

Hi,
When I upgrade PI7.11 kernel (On Operator system WIN2003 server x64 64BIT) from patch level 62 to patch level 65
or higher level 67 or71 with JSPM,
after deploy SAP can't be started with error that sapcpe.exe can not start and in 'RED' status.
It's worked before patch level 62.
Did anybody occur the same problem?
Can you give me some advice?
In my WIN2003 server x64, I have the follow DLL libraries:
Microsoft redistributable runtime DLLs VS2005 SP1(X86)
Microsoft redistributable runtime DLLs VS2005 SP1(X86_X64)
Microsoft redistributable runtime DLLs VS2005(X86)
Microsoft Visual C++ 2005 redistributable
Microsoft Visual C++ 2005 redistributable(X64)
Microsoft Visual C++ 2008 redistributable SP1(X64)
Edited by: IBM China on Feb 4, 2010 12:56 PM

> after deploy SAP can't be started with error that sapcpe.exe can not start and in 'RED' status.
Please check your event log and see if you use the current runtime. A new runtime library is necessary to fix an ATL security issue, see
Note 1375494 - SAP system does not start after applying SAP kernel patch
Markus

Creating materail in non sap system when it is create in sap

Hi,
As with the help of IDOC we can perform the activity in multiple sap server, like creation of material master if it is created in one system it can be created in other, I have one requirement , we are suing one non sap systems there we are performaing some activity with the RFC, now if any material is created in the sap system can we create the same in the non sap with IDOC. same time when it is being created in the sap.
regards,
zafar

HI,
You can use MATMAS03 or MATMAS05 idoc for transfering the material data to an externam system.
You should define this in outbound partner profile in WE20 trx.
Here you maintain the the MATMA05 in out bound parameters, and select the mode as transfer idoc immediately in output mode, give the receiving port details also.
Once the material is created, then it is automatically transfered .
Regards,
velu

Multiple SAP Systems In One MSCS Cluster

We have installed a NW 7.0 EHP abap stack in a MSCS Cluster with 2 nodes.
This was installed as a standard Cluster Install.
We have now higlighted a requirement to install a 2nd (Java ) instance in this Cluster Group.
The NW 7.0 EHP1 documentation and Note 1321854 shows that multiple SAP systems in one MSCS cluster is supported.
The documentation, however, is not clear if the 2nd instance can be installed when the 1st instance was installed without the preperations for Multiple Systems.
There are no further documentation or guidelines to help.
Has anyone come across this situation or managed to install 2 SAP instances in one Cluster Group based on Windows 2003, SQL Server 2005.
Regards

I am not quite sure if I understood your problem completley. But let's see...
Usually you use on on MSCS Cluster Group per SAP instance. So you have your already existing NW 7.0 ABAP stack in a separated Cluster Group, and you create a new Cluster Group for your new Java system.
You can find more information about it in this guide here on SDN:
Link: [High Availability;
More information about High Availability Setups for SAP System can be found here on SDN:
Link: [High Availability]
If you want to use the same database for your clustered ABAP stack and your new Java stack you can do a MCOD installation.
Please see Link: [SAP Note 388866 - Multiple Components on One Database - Installation|https://service.sap.com/sap/support/notes/388866]
Hope this helps.
Best regards,
Mathias

SAP Applications and Business Suite Installed on an SAP System

Hi to all SAP gurus,
I have a couple of questions:-
1) Is there any way to find out about the SAP applications installed on an SAP system? I used CCMS to find out about the Installed SAP
components. But does this list give the correct information? Also, can we find out which are the major and minor components from this list?
2) Can there be more than one business suite (CRM, SRM, SCM etc.) installed on a single SAP system? Or is it always the case that a single SAP system can have only one business suite installed on it so that it can either be a CRM system, SRM system or something else.
3) Is there any way (Any database table or RFC function) I can find out out about the business suite installed on a particular SAP system? One thing I saw in SAP GUI is that the title bar reads "Customer Relationship Management" if it is a CRM system. Is this a fool-proof way to find out whether an SAP system is a CRM system, SRM system etc. If yes, will this information be stored in a database table or is there any RFC function so that I can get this data programatically?
Please bear with my BIG questions. I would be grateful if any of you guys can help me on these questions. Please let me know if I have to provide clarity on any of my queries. Thanks in advance

Hi Mike,
Thanks a lot for your suggestions.
I did some research towards this as suggested by you.
1) I tried out SPAM. But this is giving more or less the same information that I am already getting using the database table "CVERS" or the RFC function module "DELIVERY_GET_INSTALLED_COMPS". Both of these give information about the installed SAP components. But these modules don't give the precise information as to which particular business suite application is installed on the SAP system.
2) I checked out the site -http://service.sap.com/instguides but couldn't get much help on here. I couldn't exactly get any information about the combinations of the business suite applications
that can be installed on an SAP system.
However, I was curious about one thing which I observed on my SAP system. The SAP GUI title bar reads "SAP Easy Access Customer Relationship Management". Can we be come to a conclusion that this is an SAP system with CRM installed on it?
Also, the installed components for this system lists "BBPCRM" as one of the application component. Can we say that this is a CRM system by looking at this? If yes, are you aware of such a similar component for the other applications SRM, PLM, SCM which tells us about the business suite application installed on the SAP system?
3) I did some rigorous search for RFC function modules that give the information I need. I came across 2 RFC function modules which give information on the SAP applications installed on an SAP system:-
a) TERM_GET_TOPLEVEL_COMPONENTS
b) SKWF_APPLS_GET
The function module "TERM_GET_TOPLEVEL_COMPONENTS" is showing a list of business suite applications installed but I am not sure if it's giving the correct information because it shows both CRM and SRM in the applications list for an SAP system.
I'd be most interested for your further suggestions regarding this.
Thanks again
- John

How to connect one SAP system to Non-SAP system(Example:Window's7)?

Hi Experts,
In general, One SAP system can connect another SAP system through RFC.How to connect One SAP system to Non-SAP system(example:window's 7) and is it possible through RFC?
Thanks and Regards,
Nageswar

Hello Wolfgang Schaper,
Thank you so much for quick response.
As you told I am trying to work with BRFplus/DSM to call decision services from nonABAP systems,so I tried with RFC.But it is not possible as you told.
Please give any solution Without using Web Services, is there any ways to connect from SAP system with the Non-SAP Systems.

XI system idoc transfer to SAP system.

hi ,
this is parthasarathi,i am using ALE/IDOC.basically i need to transfer idoc from XI system to SAP system.
can any one help me out in this case.
my system is SAP system ie inbound system.
i am using message type HRMD_A and idoc type is HRMD_A04.
1)what are the steps i need to take in the inbound system..?
2)what is the function module i need to use?
how this is reflecting SAP system.
3) idoc will be generated in XI system with employee master data and the same idoc generated in XI system ,that idoc should be send to SAP system ie inbound system.
can any help me out ..
thanks.
partha.

Hi parthasarathy,
To connect the two systems u need a connection called as RFC.(sm59)
medium of transaction is port (we21)
IDOC Intermediate document - travelling (or) data carrying from 1 - 2
create partner profiles for sharing the appln. (we20)
application linking and enabling (ALE)--used to generate an idoc in sender side and post it in the receiver side.
r3 - r3 -use ALE - transactional rfc
r3 - non r3 - use EDI (electronic data interchange) - file port
bridge (bd64) - distribution model view
to view idoc's (we05,we02)
types of data
1. master data -- ale -- eg. send materail(bd10),customer(bd12),vendor(bd14)
2.transactional data -- ale
3.control data -- cts(correction and transport systems)
Hope this gives u overall idea of how to use idoc's.
Regards,
Nagarajan.

SR1 trial prompt for DNS DomainName for SAP System in install at step 2

"WOTIZIT "
DNS DomainName for SAP System
Can I just enter Localhost or something
Cheers
jimbo

Hi there
thanks
I just unchecked the box and that was OK. Thanks
However it still failed later with the "helpful message" SAPINST.EXE has stopped working.
I was trying to install it on Windows 7 RC (build 7100) X-64 which is now out "in the wild". It's the Release Candidate so should be as near as poss to the Final Retail version.
We are all going to skip VISTA completely so I hope SAP sorts this stuff out for Windows 7 and Windows 2008 server -- both these products absolutely make VISTA like the REAL dog.
Cheers
jimbo

I can not start SAP system

I have problem about starting SAP system. I executed stopsap command. After that I rebooted the HPUX system. And I try to execute startsap command.System gives me
message below.
brckxits:bxdadm 22> startsap
Checking ORC Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
17:27:59 11.04.2007 LOG: Effective User Id is root
This is Saposcol Version COLL 20.90 700 - v2.05 for HP-UX - 28.7.2006
Usage: saposcol -l: Start OS Collector
 saposcol -k: Stop OS Collector
 saposcol -d: OS Collector Dialog Mode
 saposcol -s: OS Collector Status
The OS Collector (PID 2240) is already running .....
saposcol already running
ABAP Database ORC must be started on remote server
brckxits:bxdadm 23>

Hi,
I get a following message when i try to start SAP using STARTSAP.
maltr35:sbdadm 16> startsap
Checking SBD Database
ABAP Database is not available via R3trans
Checking SBD Database
Starting SAP-Collector Daemon
This is Saposcol Version COLL 20.94 640 - AIX v10.35 5L-64 bit 070216
Usage: saposcol -l: Start OS Collector
 saposcol -k: Stop OS Collector
 saposcol -d: OS Collector Dialog Mode
 saposcol -s: OS Collector Status
The OS Collector (PID 4448328) is already running .....
saposcol already running
Running /usr/sap/SBD/SYS/exe/run/startdb
Trying to start SBD database ...
Log file: /home/sbdadm/startdb.log
/usr/sap/SBD/SYS/exe/run/startdb: Terminating with error code 12
DB startup failed
The STARTDB.LOG states that the DATABASE is already OPEN with error code 0012.
I tried to start the oracle manually and tried starting sap using startsap R3. then it gives me the following error. 
maltr35:sbdadm 15> startsap R3
Checking SBD Database
ABAP Database is not available via R3trans
Checking SBD Database
Starting SAP-Collector Daemon
This is Saposcol Version COLL 20.94 640 - AIX v10.35 5L-64 bit 070216
Usage: saposcol -l: Start OS Collector
 saposcol -k: Stop OS Collector
 saposcol -d: OS Collector Dialog Mode
 saposcol -s: OS Collector Status
The OS Collector (PID 4448328) is already running .....
saposcol already running
Database SBD must be started first
ALSO STARTED THE LISTERNER AND STARTED THE DATABASE AND TRIED STARTING SAP STILL IT FAILS WITH THE FIRST ERROR MESSAGE MENTIONED ABOVE, KINDLY LET ME KNOW WHAT SHOULD BE DONE.

SAP won't start after recabeling sap system

Hi, 
 
I have recently recabled my sap system (from wireless to wired) and now my sap instance won't start anymore. The weird thing is that nothing major was changed. When i read the logs from the work directory it seems it cannot load dbsdbslib.dll. I have updated to the latest version of the kernel and maxdb (kernel=7.00 patch 221, maxdb=7.6.06.07) and i made very sure i got the right kernel (NT AMD64). I also checked the environment settings for the <sid>adm user. The weird part is that it seems SAP cannot connect to the database, but the databse starts just fine and r3trans -d also returns no errors. Does anyone have an idea what could be wrong? 
 
Kind regards, 
Bas 
 
 
trc file: "dev_disp", trc level: 2, release: "700" 
 
 
command line arg 0: D:\usr\sap\IDE\DVEBMGS00\exe\disp+work.EXE 
command line arg 1: pf=D:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sap 
 
ERROR => DlLoadLib()==DLENOACCESS - LoadLibrary("D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll") 
Error 126 = "The specified module could not be found." [dlnt.c 255] 
sysno 00 
sid IDE 
systemid 562 (PC with Windows NT) 
relno 7000 
patchlevel 0 
patchno 221 
intno 20050900 
make: multithreaded, Unicode, 64 bit, optimized 
pid 3252 
 
kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC) 
length of sys_adm_ext is 576 bytes 
SWITCH TRC-HIDE on *** 
***LOG Q00=> DpSapEnvInit, DPStart (00 3252) [dpxxdisp.c 1287] 
ShmProtect( 5, 3 ) 
SigIInit: ok (whoami=1) 
Thread handle for mainthread created 
SigIRegisterRoutine: handler for signal 11 installed (SigISegv) 
Pipe created:
.\pipe\SAP3252 
SigIInit: Create Message Thread 
SigIRegisterExitRoutine: exithandler installed (DpHalt) 
SigIRegisterTerminateRoutine: terminatehandler installed (DpHalt) 
 shared lib "dw_xml.dll" version 221 successfully loaded 
 shared lib "dw_xtc.dll" version 221 successfully loaded 
 shared lib "dw_stl.dll" version 221 successfully loaded 
 shared lib "dw_gui.dll" version 221 successfully loaded 
 shared lib "dw_mdm.dll" version 221 successfully loaded 
dp_loc_queue_max_blk: 40000 
mshost: >sap< 
DpSetCancelStrat: set timeout 0 at level 0 
DpSetCancelStrat: set timeout 5 at level 1 
DpSetCancelStrat: set timeout -1 at level 2 
DpSetCancelStrat: set timeout -1 at level 3 
rdisp/softcancel_sequence : -> 0,5,-1 
softcancel_sequence: >0,5,-1< 
use internal message server connection to port 3900 
msserv: >3900< 
dp_bufreftime: 120 sec 
dp_btctime: 60 sec 
dp_autoabaptime: 300 sec 
dp_autothtime: 60 sec 
dp_autojavatime: 300 sec 
dp_vm_alarm_time: 100 msec 
dp_calldelayed_time: 60 sec 
dp_startup_time: 20 
dp_noptime: 0 sec 
dp_keepalive: 1200 sec 
dp_keepalive_timeout: 60 sec 
dp_ms_keepalive: 60 sec 
dp_ms_keepalive_timeout: 300 sec 
switch off dp-keep-alive for old temus 
dp_gui_auto_logout: 0 sec 
dp_spoolalrm: 60 sec 
dp_softcancel_timeout: 5 sec 
rdisp/wp_restart_interval : 300 sec 
DpISetTrcLog: trc logging active, max size = 20971520 bytes 
dp_rfc_check_active: 1 
dp_rfc_check_all_rfcs: 0 
dp_http_check: 1 
check_master_slave: 0 
NiHsLGetServNo: got service name 'sapdp00' from operating system 
NiIGetServNo: servicename 'sapdp00' = port 0C.80/3200 
NiHsLGetServNo: got service name 'sapgw00' from operating system 
NiIGetServNo: servicename 'sapgw00' = port 0C.E4/3300 
NiIMyHostName: hostname = 'sap' 
NiHsLGetNodeAddr: got hostname 'sap' from operating system 
NiIGetNodeAddr: hostname 'sap' = addr 192.168.2.250 
NiHsLGetHostName: found address 192.168.2.250 in cache 
NiIGetHostName: addr 192.168.2.250 = hostname 'sap' (fq) 
Mon Oct 26 16:14:29 2009 
NiHsLGetNodeAddr: hostname 'www.doesnotexist0190.qqq.nxst' not found by operating system 
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0190.qqq.nxst) took 12 seconds 
Mon Oct 26 16:14:45 2009 
NiHsLGetHostName: address 1.0.0.1 not found by operating system 
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 16 seconds 
NiHsLGetServNo: got service name 'http' from operating system 
NiIGetServNo: servicename 'http' = port 00.50/0080 
NiHsLGetServName: port 1F.90/8080 not found by operating system 
NiHsLGetServName: port FC.2B/64555 not found by operating system 
NiHsLGetServNo: service name 'sapdp9988' not found by operating system 
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5521] 
SigIRegisterRoutine: handler for signal 16 installed (DpTrcOnOff) 
SigIRegisterRoutine: handler for signal 17 installed (DpTrcOnOff) 
SigIRegisterRoutine: alarm handler installed (DpSigAlrm) 
SigIRegisterRoutine: handler for signal 2 installed (DpSigInt) 
SigIRegisterRoutine: handler for signal 15 installed (DpSigInt) 
SigIRegisterRoutine: handler for signal 3 installed (DpSigQuit) 
MtxInit: 30000 0 0 
DpInitMtx: MtxInit o.k. 
PPID environment not found 
Thread handle for mainthread created 
SigIRegisterRoutine: handler for signal 19 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 18 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 24 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 0 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 21 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 22 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 23 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 25 installed (DpSigPrivDisp) 
 
 
trc file: "dev_w0", trc level: 2, release: "700" 
 
* 
ACTIVE TRACE LEVEL 2
ACTIVE TRACE COMPONENTS all, MJ
M
M command line arg 0: D:\usr\sap\IDE\DVEBMGS00\exe\disp+work.EXE
M command line arg 1: pf=D:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sap
M command line arg 2: wp_id=0
M
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - LoadLibrary("D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll")
Error 126 = "The specified module could not be found." [dlnt.c 255]
B *** ERROR => Couldn't load library 'D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll'
[dbcon.c 4905]
M sysno 00
M sid IDE
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 221
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 4000
M
M kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4000) [dpxxdisp.c 1349]
M Mon Oct 26 16:14:47 2009
M SigIInit: ok (whoami=2)
M Thread handle for mainthread created
M SigIRegisterRoutine: handler for signal 11 installed (SigISegv)
M Pipe created:
.\pipe\SAP4000
M SigIInit: Create Message Thread
M SigIRegisterExitRoutine: exithandler installed (wp_halt)
M SigIRegisterTerminateRoutine: terminatehandler installed (wp_halt)
M SigIRegisterRoutine: handler for signal 16 installed (DpTrcOnOff)
M SigIRegisterRoutine: handler for signal 17 installed (DpTrcOnOff)
M SigIRegisterRoutine: alarm handler installed (DpSigAlrm)
M SigIRegisterRoutine: handler for signal 2 installed (DpSigInt)
M SigIRegisterRoutine: handler for signal 15 installed (DpSigInt)
M SigIRegisterRoutine: handler for signal 3 installed (DpSigQuit)
I MtxInit: 30000 0 0
M DpInitMtx: MtxInit o.k.
M WaitParent Thread 3252 start
M WaitParent Thread 3252 created
M Thread handle for mainthread created
M SigIRegisterRoutine: handler for signal 19 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 18 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 24 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 0 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 21 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 22 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 23 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 25 installed (DpSigPrivDisp)
 
 
trc file: "trans.log" 
 
 
4 ETW000 r3trans version 6.14 (release 700 - 12.06.09 - 15:20:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 21.10.2009 - 15:06:04
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Oct 21 15:06:06 2009 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dbsdbslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] DlLoadLib success: LoadLibrary("dbsdbslib.dll"), hdl 0, addr 0000000188C00000
4 ETW000 7580 0.007580
4 ETW000 [dev trc ,00000] using "D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll" 16 0.007596
4 ETW000 [dev trc ,00000] Library 'dbsdbslib.dll' loaded 19 0.007615
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbsdbslib.dll 38 0.007653
4 ETW000 [dev trc ,00000] Version of 'dbsdbslib.dll' is "700.08", patchlevel (0.211) 307 0.007960
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbsdbslib.dll 26 0.007986
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbsdbslib.dll 24 0.008010
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 46 0.008056
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=39,arg_p=0000000000000000) 21 0.008077
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 15 0.008092
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000003B4F920) 20 0.008112
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 15 0.008127
4 ETW000 [dev trc ,00000] New connection 0 created 17 0.008144
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 50 0.008194
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000001A01768) 31 0.008225
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 0.008242
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 13 0.008255
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse: 16 0.008271
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO

Edited by: B. v. d. Lienden on Oct 26, 2009 5:18 PM

<div class=Section1>
Natalia,
 
To answer your questions:
1. Did you create the SAP ticket, where this problem is
reported?
I didn't report it to SAP because it is just an IDES test
system. I can easily do a reinstall, but i would like to know the cause and
solution to this problem.
 
2. Do you have dbsdbslib.dll at this location? What version?
Yes, i have the dbsdbslib.dll at location
D:\usr\sap\IDE\DVEBMGS00\exe and also D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
Version is 7000.221.16.41497 (kernel 7.00 SP 221)
 
your requested output:
 
----

disp+work information
----

 
kernel releaseu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700
 
kernel make variantu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700_REL
 
compiled onu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 NT 5.2 3790 Service Pack 2 x86
MS VC++ 14.00
 
compiled foru00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 64 BIT
 
compilation modeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 UNICODE
 
compile timeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 Aug 23 2009 23:15:57
 
update level u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A00
 
patch numberu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 221
 
source idu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0.221
 
 
----

supported environment
----

 
database (SAP, table SVERS)u00A0u00A0 700
u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\ideadm\Application Data
CLIENTNAME=BSF02
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
COMPUTERNAME=SAP
ComSpec=C:\WINDOWS\system32\cmd.exe
DBMS_TYPE=ada
DIR_LIBRARY=D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
DIR_PROFILE=D:\usr\sap\IDE\SYS\profile
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\ideadm
JAVA_HOME=C:\j2sdk1.4.2_21-x64
LOGONSERVER=
SAP
NUMBER_OF_PROCESSORS=2
OS=Windows_NT
Path=D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\j2sdk1.4.2_21-x64\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program
Files\Intel\DMIX;D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=EM64T Family 6 Model 15 Stepping 13,
GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f0d
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
PROMPT=$P$G
SAPEXE=D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
SAPLOCALHOST=sap
SAPSYSTEMNAME=IDE
SESSIONNAME=RDP-Tcp#47
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\WINDOWS\TEMP\2
TMP=C:\WINDOWS\TEMP\2
USERDOMAIN=SAP
USERNAME=ideadm
USERPROFILE=C:\Documents and Settings\ideadm
windir=C:\WINDOWS
 
----

disp+work information
----

 
kernel releaseu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700
 
kernel make variantu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700_REL
 
compiled onu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 NT 5.2 3790 Service Pack 2 x86
MS VC++ 14.00
 
compiled foru00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 64 BIT
 
compilation modeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 UNICODE
 
compile timeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 Aug 23 2009 23:15:57
 
update levelu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0
 
patch numberu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 221
 
source idu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0.221
 
 
----

supported environment
----

 
database (SAP, table SVERS)u00A0u00A0 700
u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
 
 
</div>

SAP system can't start up

Similar Messages

Maybe you are looking for