SAP/System did NOT prompt me for a transport request for ALE BD64 CDM View!

Hi Experts,
Am doing ALE setup for sending sales orders IDOC out to a 3rd party system.
I have created the logical system and attached to a transport. Here we dont have necessity of linking a client to this logical system!
Then, I created a Distribution Model (CDM) View in BD64 transaction and added Message types to it, but SAP/System did NOT prompt me for a transport request!! Pls. let me know
1) Is it usual with CDMs creation that NOT prompting for a transport? if so, How my CDM/changes will be moved to QA/Production?
2) If not, Why system did not prompted me for a transport?
3) Then How Can I attach my CDM/changes to a transport?
Thank you

I don't think we get a TR prompt when adding a view in BD64.
You've to individually maintain the CDM view in QAS & PROD. Also there is a functionality to "distribute" the CDM view, are you looking for something similar ?

Similar Messages

System did not prompted me for any Transport,when i added IB param in WE20?

Hello
I have added 2 inbound parameters to existing Partner profile (type is 'LS') in WE20 transaction, but, system did not prompted me for any transport request!!
When i checked EDP21 table, my entires are saved in this table.
Why systme is did not prompted for TR? How to get them into a TR and get them into QA?
Thank you

Hi,
if you look in TABLE MAINTENANCE GENERATOR DIALOG for table EDP21, then you can see, there is setting
no, or user, recording routine
Regards,
Klaus

J2EE Engine JC00 of SAP System did not come up after 200 seconds waiting fo

Hi,
In the process of installing SAP WEBAS for java, during the last phase of installaion I am getting this problem
J2EE Engine JC00 of SAP System EPD did not come after 200 seconds waiting for another 20 seconds.
my platform is
AIX 5.3
jsdk jsdk1.4.2 64 bit
Can any one help me out as I am stuck and getting no help from anywhere
pradeep

Hi Pradeep,
Check your trace files in the /usr/sap/<SID>/DVE.../work directory (dev_bootstrap, dev_disp, log_bootstrap etc..) for any errors preventing J2EE from starting.
It can be related to incorrect java path in the instance profile, incorrect JDK (see the OSS note # 716927).
You can restart J2EE engine via SMICM once you clarify the issue.
Regards,
Mike

Doubt in creating the transport request for "STANDARD TEXT""

HI ALL,
i used the standard text in scripts but i am getting the problem while creating the transport request for that,
i am not able to create the transport request for that,if anybody knows plzlet me know,
this is very urgent,
thanks and regards,
saikrishna.

HI SURESH ,
THANKS FOR UR IMMEDIATE REPLY ,
i executed that report in that i have given
Name of Correction : ZREPST
Textkey-object:
Text key name:
Text key - ID: ST
Text key - language :EN
Here Textkey-object,Text key name
wat i have to ,give after that ,can i execute that ,
will it create the request.
plz let me know,now ur answer is very valueble ,because ,now i have to release everything,
plz let me know immediately,
thanks and regards,
saikrishna.

System did not find a valid bill of material

Hi All,
I have a requirement in which the client needs to supress the standard SAP message(information) which appears at the time of creation/change of sales order.
Message :The system did not find valid bill of material.
I am working on user exit : MV45AFZZ--> USEREXIT_MOVE_FIELD_TO_VBAP.
Could you please help me with any structure/table where we can pass any parameter field in order to supress this message?
Thanks
Kishan

XVBAP for detail table
vbap for header table.
also,you need to use user
exit MV45AFZB USEREXIT_SOURCE_DETERMIN

System does not prompt to change the initial passwd

hi,
While trying to login to the SAP system with my initial password, the system does not prompt me to change my initial passwd and lets me in, could anyone let me know how can i change the system to force change the initial passwd.
thank you
Jonu

Please provide more details about "your system".
Typically causes:
- Your user ID is either of type SERVICE for which password changes are not required and they cannot change their own passwords either. So you are "consuming" a service and prior authentication does not have anything to do with the authentication of the SAP system.
- You are logging on from an external client system which is calling RFC's to logon to the SAP system. By default, this only prompts for password change or rejects the logon attempt if you instruct the system to do so.
Please provide more details.
Cheers,
Julius

I am trying to delete songs from itune 11 library and i want it to delete the song from my hard drive as well. All my songs are in the music folder but not in the itunes folder?? itunes did not prompt me to move file to trash nor is there an option??

I am trying to delete songs from itune 11 library and i want it to delete the song from my hard drive as well. All my songs are in the music folder but not in the itunes folder. itunes did not prompt me to move file to trash nor is there an option to remove file to trash bin. How can i delete songs from both the itunes and hard drive at the same time?

aespinoza2210 wrote:
could it be in the itunes folder or does it have to be in the itunes media folder, which is within the itunes folder??
A Espinoza,
The iTunes Media folder is set in Preferences > Advanced, and is the key to most iTunes folder organizational activities. So I doubt that the automatic deletion will work for files that are somewhere else within the folder structure.
However, I have not experimented with that issue in quite a while, so you are welcome to give it a try in iTunes 11.

Solaris 10 u8 system did not update daylight savings time

I am running Solaris 10 u8 x86, and my system did not update for the daylight savings time change on Nov. 1, 2009. I am in the US/Mountain time zone. What should I do?
Patch 141517-04 is installed, I assume it came with u8.
Does this have something to with JAVA Time Zone updater? I saw this:
http://java.sun.com/javase/timezones/tzdata_versions.html
Shouldn't u8 take care of all this automatically? Do I have to somehow get TZUT 1.3.20? By contacting support? What?
Any suggestions would be greatly appreciated.

BTW, I'm running 64-bit Solaris as a VirtualBox (3.0.10) guest VM on a 32-bit WinXP host.

SAP System is not the original system of the object being edited

Hi All,
We recently built a new system which is Copy of another system.We decomission our old system.Now when ABAPer is trying to edit Z/Y programs in se38 they are getting message "SAP System is not the original system of the object being edited".We already completed all post process after system copy.Client is open and status in Golbal modifiable in se06.
How we can resolve this situation.

Hello Guys,
Thks for your input.
@Vinod,
We rebuild new development system from the exsisting devlopment system and scrap old one.And yes thats true that new system is not the original system where object was created,its a replica of old dev to nev dev with SID change.
@Arjun,
I already check TADIR table and and its pointing to new SID.
@Ashok,
As i said earlier,post intallation is already completed.
Its a problem for developer who's getting some different format of screen when they editing development object ,like, when we perform manaul corretion in abap code through snote.They can see buttons to insert code line,delete line.
Thx,Nilesh

I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. going again?

I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. up and going again?

Niel...
I installed Leopard 10.5.6 and then it upgraded to 10.5.8, when I installed it I had the old info saved to a "previous systems" folder, where most of my artwork, etc. were saved, I have a one terabyte Lacie backup that unfortunately did not work as it was intended...it saved the new info and not the old. I did look into the system preferences folder and found the classic file, of course it wouldn't launch...but I have the old G 5 startup discs and will try to do it as you stated. I will try also to move it out of the previous folders file to my hard drive and see how that works.
thank you for your time and help,
Dennis

When I try to use the Vision Acquisition vi, I get an error message saying that " The system did not receive a test packet from the camera."

Error -1074360271 occurred at IMAQdx Start Acquisition.vi
NI-IMAQdx: (Hex 0xBFF69031) The system did not receive a test packet from the camera. The packet size may be too large for the network configuration or a firewall may be enabled.

Bruce Ammons wrote:
Did you try disabling test packets? I know Basler cameras have a "Enable Test Packets" setting buried in Advanced Network settings or something like that. You have to change the setting in MAX to show all settings instead of just acquisition, then locate the setting. I have been told regularly that the setting must be turned off for Basler cameras to work properly. Perhaps your camera has the same setting and the same requirement.
Bruce
A very specific firmware revision for certain Basler cameras had an issue where the test packet would not be sent for certain packet sizes and certain specific conditions, causing a false report of a test packet failure when a normal acquisition would in fact succeed. However, this was fixed in later firmware revisions and I have never seen a similar issue on any other types of cameras.
Aside from this specific case, if a test packet fails, it generally means an acquisition will as well. Given that Pleora's software can acquire, we can rule out networking topology and hardware, assuming you are using the same packet size as the Pleora software is. The only other thing that would seem a likely candidate would be a software issue like a firewall or some other filter driver that is interefering with IMAQdx receiving the data.
Eric

The Systems Did Not Find a Valid Bill Of Material

Hi Everyone,
when creating a sales order - with a sales bom we encounter the following message - 'The Systems Did Not Find a Valid Bil Of Material'. If anyone has encounter such a message before appreciate of you can help to shed some light. Below is the settings which I have set-up in our systems.
- When creating sales order the following error appears 'The systems did not find a valid bill of material'.
- Detail of the error message
- The item category TAQ having the field structure scope - A & Application - SD01.
The component of the bom which supppose to appear in the sales order
The item category settings.
The sales bom structure.

Hi Phanikumar / G. Lakshmipath,
I truly appreciate both your feedback as the systems which I am currently working have most of the setings either wipe off or gone for good. I may have ask some basic questions .. however please do not misunderstand me as the situation i am currently in is really in a fixed (as I have receive some sarcastic remarks).
I have done the checking and made the corrections as per your advice, however i am still encountering the same message which says no valid BOM.
Settings which I have change.
Item category determination for header
Item category determination for item
Thanks
Regards
Ken

Ipod touch did not prompt to enter apple id password when installing an application.

I tried to do a restore and tried using creating another apple id. But still the ipod touch did not prompt me to enter apple id password and immediately proceed to install the application. How to solve this? Please help .....

Hi,
Yes. I tried to install another application within 10-15mins. Thanks for enlightening me as I'm new to Apply products. Feeling kind of silly that I did not really read up the user guide. Thanks for your advise.

I have replied to you three times now without reply. I DID NOT authorise a payment of £9.99 for NowTV. What is the solution to getting my money refunded. I think you assume I will go away after being Ignored. No I will not go away. I find now that you hav

I have replied to you three times now without reply. I DID NOT authorise a payment of £9.99 for NowTV. What is the solution to getting my money refunded. I think you assume I will go away after being Ignored. No I will not go away. I find now that you have DISABLED MY APPLE ID. Is this a punishment you use to anyone who takes up a stand against charges being made unauthorised on their account?. Please tell me why you have disabled my account. When will my account be restored? If not when will you refund ALL my purchases made to APPLE/ITUNES? I can then move on to another brand and hopefully better customer service. After reading articles regarding APPLE ID DISABLED it appears common practice from your company to DISABLE anyone's account if they question unknown charges. Please reply with your intentions regarding the unauthorised payment and the DISABLING of my account.
David Forrester.
Sent from my iPad
On 18 Mar 2014, at 09:20, iTunes Store <[email protected]> wrote:
Follow-Up: 319042795
Hello again,
I wanted to send a quick note to see if you are still experiencing any difficulties with the iTunes Store. Resolving your issue is important to me, so please don't hesitate to reply if you need any further assistance.
Sincerely,
iTunes Store Customer Support
http://www.apple.com/support/itunes/ww/
Dear David,
Welcome to iTunes Store Customer support.
I understand that you have been charged an additional 9.99 GBP for a purchase that not authorized. I know how eager you are to know more about this purchase and I am happy to look into this for you.
David, the purchase worth 9.99 GBP was for a day pass from "NOW TV for Apple TV." To review your iTunes Store account's purchase history, please follow the steps in this article:
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/HT2727
Please reply to this email and let me know if this purchase was unauthorized.
Thank you for being an iTunes Store customer. Have a great day!
Sincerely,
iTunes Store Customer Support
http://www.apple.com/support/itunes/ww/
Lang_Country: en_gb
User Storefront: UK
Concern Type: Problem Not Listed
Web Order #:
Content Title: NOW TV Day Pass
Provider Name: BSkyB
Track IDs: []
Purchase Date : 2014-03-16 12:33:48 Etc/GMT
Purchase Device : Apple TV
Comments : I am being charged for what is listed plus another _9.99 for Apple TV pass. Did not authorise this _9.99 charge and not sure what it is exactly.
<Personal Information Edited by Host>

This is a user-supported board. You are not addressing Apple here. Nor is it a good idea to post your private information to a public forum. You should edit your post immediately.
Unfortunately no one here can access your support history. You must respond to the emails directly.

I just bought music on my iTunes account and the files did not download completely. The songs play for a minute or so then skips to next song.

I just bought music on my iTunes account and the files did not download completely. The songs play for a minute or so then skips to next song

If you live in a Region that allows re-downloading Music... Delete the Song and re-download it...
Download Past Purchases
http://support.apple.com/kb/HT2519
If not... Contact iTunes Customer Service
Apple Support iTunes Store Contact Us

SAP/System did NOT prompt me for a transport request for ALE BD64 CDM View!

Similar Messages

Maybe you are looking for