SAP system IDOC - XI - SAP system IDOC

Hi,
I have created several scenarios for sending IDOCs between different SAP systems, but I have a problem with just one SAP system that is a copy of our production system when is acting as a source.
When sending the IDOC from source system, I can see the IDOC in SM58, with the following error message;
"client xxx is not available in this system" where the client is actually the client of the receiving system.
I have successfully sent IDOCs from other SAP systems to the same target SAP system so there is nothing wrong with the target system.
Anyone experienced the same? Any ideas?
best regards
Torstein

Hi,
I am facing the same issue too. My target system is also release 700 and I have done all my SALE config, we21 settings. But still the error repeats as " Client XXX is not available in the system". How did you fix this issue?
-Teresa

Similar Messages

Unable to import idoc into PI 7.0 system from SAP r/3 system

Hi Experts,
    I am getting an error while importing an Idoc structure from SAP r/3 system. The error says "unable to read Idoc segments". The Idoc has recently undergone changes. When We are looking at the struture of idoc through IDOCSYN table it is showing updated structure in SAP R/3 system but import to SAP XI is failing.
Can you suggest some way to tackle this kind of problem.
regards
Anupam

Hi Francis,
   This was indeed an authorization issue. Thank you so much for your valuable suggestion. The user lacked proper authorization to import the idocs.
Hi All,
    Thank you for all your support.
Regards
Anupam

Idoc not posted in sap system

Hi All,
i have configured the file to idoc and idoc to idoc scenario.
in sxmb_moni,the inbound idoc is fetching one port and the out bound idoc is fetching the default port,how can i config the port that is idoc comming from sap system.
in interface mapping i am not able to assign the operational mapping that is created in IR, it is fetch the default name space of the idoc ,which is not to our operational mapping created in IR.
Regards,
reddy

in sxmb_moni,the inbound idoc is fetching one port and the out bound idoc is fetching the default port,how can i config the
port that is idoc comming from sap system.
In Message Mapping enable the EDI_DC40 segment and then give value to the SNDPOR/ RCVPOR ....once done in receiver IDOC channel check the Apply Control Record from Payload....Michal has written a blog on EDI_DC40 segment check it once.
in interface mapping i am not able to assign the operational mapping that is created in IR, it is fetch the default name space
of the idoc ,which is not to our operational mapping created in IR.
This behavior is correct....IDOC will refer to its own namespace and not to the one created in IR.....and this should not cause any issue while assigning mapping in Interface Determination....if it is causing an error then you have not selected the objects properly.
Regards,
Abhishek.

How to relate IDOC generated in sap through ALE from legacy system

Hi all,
can any one tell me how can relate an idoc generated in SAP with the new idoc generated in a legacy system. I mean how could I identify, which idoc is generated for a particular idoc in legacy system and vice versa.
Thanks,
Nilanjana

Thanks Suhas but when i am getting error message related to partnr profile when pressing this 'TRACE IDOC' button even with idoc in status 53.
Edited by: nilanjana sinha on Nov 11, 2011 8:20 AM

Upload data from legacy system to SAP through ALE IDOC

Hello All,
I have a requirement where i need to upload the data from legacy system to SAP. So i am using ALE IDOC.
In my requirement i need to extend the Standard IDOC. I have extended the IDOC and even found the exit for the updation of the extended fields to SAP. My data would be be placed in the application server.
Can anybody tell me how to retrieve the data and update in the tables for the extended fields.
Could you please provide a sample program for retrieving data for IDOC.
Thanks

Hi,
You can find the sample code in the following link.
Re: calling idoc_input_creditor
Regards
Sajid

Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interfa

Hi
i am try do
Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interface
With The help of SDN Contribution
link----
( have look on it)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4943f2b7-0a01-0010-37af-faff35b2f08c
I am getting error in
Partner system as HTTPLOG and "Execute" to check the results
Error is -- Port could not be created
RFC destination HTTPLOG Not specified for system HTTPLOG
any 1 have any idea if plzzzzzzzz...........
Thank u
Ram

Hello .
we are also in process of implementing the same
could you share the knowledge pl?
1)is it a separate add on with ALE to saphr
or using ECC ??
2)can u share the configuration part ??
we are trying it on webas as addon 3.0 .

How to Trigger an IDOC from SAP R/3 to two systems at a time

Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELVRY03 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once. We need to write a logic to route the same to two different systems
Can any one tell me how can we do that ?
Regards
Ram.

Hello Ram,
Do you have connectivity between your production & XIQ?
What does "connectivity" mean?
1. RFC destination is maintained.
2. Port defined for the RFC destination.
If no, create these. (Search in SDN for details).
If yes, proceed:
1. Define the logical system for XIQ.(BD54)
2. Define the same as your partner profile. (WE20). Add the message type SYNCH with the port for XIQ.(This is imp)
3. Create a distribution model view with sender as "your production" & receiver as XIQ.
3.1. Add the messages which you want to distribute.
3.2 Generate Partner profiles.
No coding is reqd. for this.
BR,
Suhas

Data elements for IDoc Segments to non-SAP system

Hi,
I need to create IDocs for transferring data to non-SAP system. When I create segmet fields should I create new data elements for all the fields with attributes specific to receiving system? Because there are many fields where the field attributes of SAP system do not match the corresponding fields of receiving non-SAP system.
Thanks in advance!!
Regards,
Sriram

Hi Sriram,
When I create segmet fields should I create new data elements for all the fields with attributes specific to receiving system
Is it custom segments .
Regards,
Madhu.

Idoc b/w sap(r/3) and non sap system .

hi gurus,
how i pass an outbound idoc b/w sap(r/3) and non sap system .
which function module we will use in this scenerio for inbound and outbound idoc both
please guide me with an example .

Hi Pawan,
Non SAP system should have RFC adapter in order to receive and send Idocs from/to SAP.
If this is not your case, you should us a Integrator Middelware with RFC and standard adapters like SAP Exchange Infrastructure.
If for example, your non SAP system is able to process data from flat files you can build next interface: SAP send Idocs to middleware that receive them using RFC adapter, middelware maps Idocs into flat file and send it to a one of non SAP system folder using FTP adapter. Non sap system triggers the flat file into its applications.
Reward points if useful.
Roger

What all configurations to do in SAP R/3 to send an iDOC to XI system

I want to send an idoc from an SAP R/3 ECC5.0 to an XI system Netweaver 04's.
Pls let me know the STEPS I HAVE TO DO IN MY r/3 SYSTEM .
I have created the RFC destination in R/3 and XI system but still the idoc is not going into XI system.
It would be a great help if i can get step bu step guide for the configurations i have to do in R/3 .

Hi,
First check the status , with we02
Also see the below links
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/sravya.talanki2/blog/2005/10/27/idoc146s-not-reaching-xi133-not-posted-in-the-receiver-sap-systems133 - Idocs not reaching XI. Not posted in the receiver SAP
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
IDoc erros troubleshooting - /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
idoc mapping - /people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
Regards
Chilla

Error when sending INVOICE01 iDoc to SAP R/3 system

Hi,
I was trying to send an INVOICE01 iDoc to SAP R/3 system. I checked the iDoc list (transaction code we02), the iDoc I sent was in the status 51 with the error message as "Program parameters LS <Logic System Name> <Company code> have not been set". Could someone help me how to resolve this error?
Thanks,
Trifire

SLG1 or IDOC in idoc status WEDI

Could not log on to SAP R/3 from XI system to import IDOC/RFC objects

Could not log on to SAP R/3 systems from XI system to import IDOC/RFC objects:
As soon I enter the SAP IP address, system number, user id and passowrd , getting following error.
Details
java.lang.ArrayIndexOutOfBoundsException
STACKTRACE:
com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: java.lang.ArrayIndexOutOfBoundsException
 at com.sap.aii.ibrep.sbeans.upload.UploadServiceBean.openSAPSource(UploadServiceBean.java:79)
 at com.sap.aii.ibrep.sbeans.upload.UploadServiceRemoteObjectImpl0.openSAPSource(UploadServiceRemoteObjectImpl0.java:320)
 at com.sap.aii.ibrep.sbeans.upload.UploadServiceRemoteObjectImpl0p4_Skel.dispatch(UploadServiceRemoteObjectImpl0p4_Skel.java:196)
 at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:291)
 at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
 at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:119)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
 at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
java.lang.ArrayIndexOutOfBoundsException
Can anyone help me to solve this issue.

Venkat,
You can download them from http://service.sap.com/download
For 4.6c follow
Download
 Support Packages and Patches
 Entry by Application Group
Select Support Packages and Patches -> SAP Application Components -> SAP R/3 -> SAP R/3 4.6C -> Entry by Component
Mainly You need SAP ABA 4.6C and SAP BASIS 4.6C and SAP APPL 4.6C
The most latest one is Support Package 50. What you can do is after applying half of them you can try to logon from XI system for import of RFC/IDoc.
regards
SKM

How to Trigger an IDOC from SAP R/3 to two XI systems

Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELCERY01 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once.
Regards
Ram.

Hi Ravi,
Thank you very much for your answer.
As I am not completely aware of R/3 side,I am getting little problem in understanding your answer.
Could you please explain the same in some what beter way.. Thank you ..

Is it possible to read Idocs from SAP R/3 System?

Is it possible to read Idocs from SAP R/3 System? Instead of the aRFC

Unless Hydra emulates ECC sending IDOCS, then you just might want to use the WSMessageListener (http://help.sap.com/saphelp_xmii120/helpdata/en/45/6a86ac88130dece10000000a11466f/frameset.htm) and configure your message processing rules accordingly.

Transfer article master from SAP R/3 To External Systems(Futura) Using IDOC

Dear Experts
Please let me know how to Transfer article master from SAP R/3 To External Systems(Futura) or text file Using IDOCs.
thanks

Hello,
Since you want to transfer Article Master, it should be a Retail System. So you should use Message Type ARTMAS. For fullbuild, you can use transaction WDBM and for changes, you can use WDBU. For changes, you can enable change pointers for required fields using BD64.
Thanks,
Venu

FICA -IDOC for posting the billing data from NON-SAP ISU system

Hi,
Kindly note we are implementing NON-SAP ISU with SAP FICA for the finance implementation. In this context, we ahve identified BAPI for BP and CA. We have decided to go for transaction posting through the transaction FPE1. For this, we are looking for the transaction data IDOC which is CTRACDOCUMENT_ACCOUNT (FICA Posting) in the WEDI. But it seems that it is not yet released. Can anybody help me out for this to either identify the equivalent IDOC or other method to post the data from Banner system (NON-SAP ISU ) system. We are presently not implmenting billing system in SAP ISU, but only FI system

Hi,
you can create the same...
but normal practice what we do is create swc for each system so that it is easy to maintain and easy to extend in the future..
or else follow some conventions if you are just starting the things..
HTH
Rajesh

SAP system IDOC - XI - SAP system IDOC

Similar Messages

Maybe you are looking for