SAP System run slowly

Dear all,
Our DB Instance always run very slowly and update process
responding time is very long during month end.
I think this maybe due to it runs the database and application.
So I want to delete the DB Instance from Logon Group, and then users
will just access other else three Dialog Instances, is it Ok or what
impact will have ?
How to check PI system connected to SAP ECC Logon Group's IP , but not only
connected to the DB Instance ?
Users always need run many Background Jobs at the day,but I heard other
company almost only allow users run Background Jobs at the night.
Generally, how many background jobs running on one Instance is normal?
Do we have any good ways to control or limit users' background job
setting at the day ?
The dialog and update process numbers of DB Instance are respectively 80 and 6(Update & Update2) , other Dialog Instance is 50:4(Batch:Update)
How is the general ratio between dialog and update process numbers ?
what's the difference between update and update2 process ?
Thanks,
Michael

Hi Michael,
Your company basis team searching why SAP system run slowly.
But don't have your company basis team check your system transactions.
ST01 - Operating system monitor
ST02 - Tune Summary
ST04 - SQL Server performance analysis
SM21 - System Log
SM50 - Process Overview
SM13 - Update Requests.
SM12 - Lock Entries
Maybe long time background working process see u overview tcode SM50 and SM12 kill procees after system speed normaly.
Regards.
Cem ATES

Similar Messages

  • Problem after deinstallation of JDK during SAP System running....

    Hello...
               I am working as a SAP BASIS trainee.I am facing some problem related with java and SAP System.
    Actually an SAP System was already  running on the my system and suddenly i required to work on eclips (an IDE for java). And to install eclips it required JDK 1.6 version.But as we know that for SAP System an JDK 1.4 version required only.
                   I forgot and deinstalled JDK 1.4 and Installed JDK 1.6. and again tryied to installed eclips bt it was still throwing an error that it required JDK 1.6 and currently JDK 1.4 is running.
      On the other hand SAP System was getting problem during SAP START (  dialog queue waiting time elapsed .......). and finally not working.
       I deinstalled JDK 1.6.  now SAP System is working fine. It is getting started and everything is right.
    Could i get any problem latter regarding to SAP Start??and why i cant use eclips on the same system??
    Thanks in advance.
    Uttam Kumar.

    > Could i get any problem latter regarding to SAP Start??and why i cant use eclips on the same system??
    You need to make sure that the SAP system uses the correct JDK. You can install two JDKs in parallel (don't upgrade but install the 1.6 JDK in a separate directory).
    Anyway, NWDI should not be installed on the server but on a local workstation.
    Markus

  • Hi, I am having trouble MacBook Air crashing since Yosemite upgrade. I ran an Etresoft check but I don't know what it means... my system runs slowly and crashes. I have to force shutdown. Sometimes screen is black for a split second b/w webmail pages

    Hello,
    I am having trouble with my MacBook Air 13 inch June 2012 MacBook Air5, 2 4GB RAM  details below in Etresoft report. I recently upgraded to Yosemite and am having system trouble. My computer crashes and I have to force quit to restart. When using webmail there is a black screen for a split second between pages. This did not happen before. I am worried that it is not running properly and perhaps I need to revert to the previous operating system. I only have a MacBook Air and no need to share images between a tablet or phone so I did not need the new photo sharing software of Yosemite. I wonder if I don't have enough RAM to run it? I did not run time machine before I made the upgrade as I did not realise the significance of an upgrade as not very Mac literate. Any advice on whether my system is in danger... most appreciated! I am writing a book and making a back up but this machine is my lifeline and my work is conducted through it. It ran perfectly before... the Yosemite upgrade has perhaps highlighted some problems and it has unnerved me!
    Thanks ever so much for your advice!
    Lillibet
    EtreCheck version: 2.2 (132)
    Report generated 5/2/15, 9:53 PM
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Air (13-inch, Mid 2012) (Technical Specifications)
        MacBook Air - model: MacBookAir5,2
        1 1.8 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Not upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en0: 802.11 a/b/g/n
        Battery: Health = Normal - Cycle count = 694 - SN = D86218700K2DKRNAF
    Video Information: ℹ️
        Intel HD Graphics 4000
            Color LCD 1440 x 900
    System Software: ℹ️
        OS X 10.10.3 (14D136) - Time since boot: 0:22:41
    Disk Information: ℹ️
        APPLE SSD SM256E disk0 : (251 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 249.77 GB (167.35 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 250.14 GB Online
    USB Information: ℹ️
        Apple, Inc. Keyboard Hub
            Mitsumi Electric Apple Optical USB Mouse
            Apple Inc. Apple Keyboard
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Internal Memory Card Reader
        Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/WD +TURBO Installer.app
        [not loaded]    com.wdc.driver.1394HP (1.0.11 - SDK 10.4) [Click for support]
        [not loaded]    com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) [Click for support]
        [not loaded]    com.wdc.driver.USB-64HP (1.0.3) [Click for support]
        [not loaded]    com.wdc.driver.USBHP (1.0.14) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.wdc.driver.1394.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
        [loaded]    com.wdc.driver.USB.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
    Problem System Launch Daemons: ℹ️
        [failed]    com.apple.mtrecorder.plist
    Launch Agents: ℹ️
        [running]    com.mcafee.menulet.plist [Click for support]
        [running]    com.mcafee.reporter.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    Launch Daemons: ℹ️
        [running]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [failed]    com.apple.spirecorder.plist
        [running]    com.mcafee.ssm.Eupdate.plist [Click for support]
        [running]    com.mcafee.ssm.ScanManager.plist [Click for support]
        [running]    com.mcafee.virusscan.fmpd.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Dropbox    Application  (/Applications/Dropbox.app)
        AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
        EvernoteHelper    Application  (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
        TouchP-150M    Application  (/Applications/Canon P-150M/TouchP-150M.app)
        iPhoto    Application  (/Applications/iPhoto.app)
        WDDriveUtilityHelper    Application  (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
        WDSecurityHelper    Application  (/Applications/WD Security.app/Contents/WDSecurityHelper.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        JavaAppletPlugin: Version: Java 8 Update 45 Check version
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        FUSE for OS X (OSXFUSE)  [Click for support]
        Java  [Click for support]
        MacFUSE  [Click for support]
        NTFS-3G  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: ON
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 249.77 GB Disk used: 82.42 GB
        Destinations:
            My Passport Edge for Mac [Local]
            Total size: 499.94 GB
            Total number of backups: 27
            Oldest backup: 2013-01-31 21:15:26 +0000
            Last backup: 2015-05-02 11:33:09 +0000
            Size of backup disk: Adequate
                Backup size 499.94 GB > (Disk used 82.42 GB X 3)
    Top Processes by CPU: ℹ️
             6%    WindowServer
             3%    fontd
             2%    VShieldScanManager
             0%    taskgated
             0%    notifyd
    Top Processes by Memory: ℹ️
        745 MB    Google Chrome Helper(8)
        439 MB    kernel_task
        246 MB    VShieldScanner(3)
        160 MB    Google Chrome
        127 MB    Finder
    Virtual Memory Information: ℹ️
        130 MB    Free RAM
        3.87 GB    Used RAM
        0 B    Swap Used
    Diagnostics Information: ℹ️
        May 2, 2015, 09:30:08 PM    Self test - passed
        May 2, 2015, 08:52:59 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-02-205259_[red acted].crash
        May 2, 2015, 09:28:53 AM    /Library/Logs/DiagnosticReports/backupd_2015-05-02-092853_[redacted].cpu_resour ce.diag [Click for details]
        May 1, 2015, 05:45:24 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/EvernoteHelper_2015-05-01-1745 24_[redacted].crash
        May 1, 2015, 05:38:54 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173854_[redacted].crash
        May 1, 2015, 05:38:43 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173843_[redacted].crash
        May 1, 2015, 05:38:32 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173832_[redacted].crash
        May 1, 2015, 05:38:27 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173827_[redacted].crash
        May 1, 2015, 05:38:10 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173810_[redacted].crash
        May 1, 2015, 05:38:00 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173800_[redacted].crash
        May 1, 2015, 05:37:49 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173749_[redacted].crash
        May 1, 2015, 05:37:38 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173738_[redacted].crash
        May 1, 2015, 05:37:27 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173727_[redacted].crash
        May 1, 2015, 05:37:22 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173722_[redacted].crash
        May 1, 2015, 05:37:06 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173706_[redacted].crash
        May 1, 2015, 05:36:55 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173655_[redacted].crash
        May 1, 2015, 05:36:44 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173644_[redacted].crash
        May 1, 2015, 05:36:33 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173633_[redacted].crash
        May 1, 2015, 05:36:22 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173622_[redacted].crash
        May 1, 2015, 05:36:17 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173617_[redacted].crash
        May 1, 2015, 05:36:01 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173601_[redacted].crash
        May 1, 2015, 05:35:50 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173550_[redacted].crash
        May 1, 2015, 05:35:39 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173539_[redacted].crash
        May 1, 2015, 05:35:28 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173528_[redacted].crash
        May 1, 2015, 05:20:29 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-172029_[red acted].crash
        May 1, 2015, 04:55:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-165505_[red acted].crash
        May 1, 2015, 02:53:58 PM    /Library/Logs/DiagnosticReports/sharingd_2015-05-01-145358_[redacted].crash
        Apr 20, 2015, 09:31:20 PM    /Library/Logs/DiagnosticReports/Kernel_2015-04-20-213120_[redacted].panic [Click for details]

    When you have kernel panics, the pertinent information is in the panic report.
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

  • System running slowly and keeps locking up. I get "Mozilla Firefox not responding" message until system catches up and strts operating again. Ideas?

    When I boot system it takes forever to open. Once it is up and running I can move through some pages easily but if I try to open news sites or sites with a lot of information the system locks up as it is loading (sometimes for several minutes at a time) and will not let me get out until the system catches up. In some instances I get a "Mozilla Firefox not responding" message in the upper tool bar and the screen gets a milky color until the system catches up and allows me to continue. Any ideas?

    According to everymac.com, your Mac came with Tiger, 10.4.x and can't go any higher than Lion, 10.7.x.
    It would have come with gray, machine specific disks. Since there's no reason to install 10.4.x first, and then Snow Leopard over that, just purchase a retail copy of Snow Leopard for $20. What you won't get with the retail version of SL is the iLife suite (Garage Band, iDVD, etc.) that were on the original bundled disks, but you can purchase iLife on Amazon pretty cheap, and get newer versions besides.
    When you get Snow Leopard, you can boot to the DVD, erase the drive and install everything clean. Hopefully, you issue is only software, and not hardware related.

  • After installing new GTX 660 TF OC system running slowly and lags in graphic

    Hello
    I have had some problems with my newly bought  MSI GTX 660 TF 2GB OC card.
    After install the computer have been very slowly allmost like the driver wasn't there. When I drag a window it show the animation in frames and lag. And this is in windows basic theme. My CPU also have a higher load when performing task than before.
    My previous graphic card was: GTX 295
    What I have already tried:
    1. Remove all existing drivers and using "Driver sweeper" in failsafe mode. Then reinstall the newest driver from Nvidia
    2. Tried another PCI-E slot
    3. Tried another PCI-E cable for power
    4. Reinstalled the drivers once more
    5. Format my computer and installed drivers once more
    6. Updated my mobo bios
    After reading some more i expect the problem could be solved by update my Graphic card Bios as there is a newer bios available.
    I have downloaded the bios from the MSI download under the GTX 660 TF OC card.
    However I don't know how to flash it. The read-me says this:
    Quote
    If your card with Hybid bios face the compatible issue, with this NV flash tool, you can flash bios to Legacy bios under DOS solving compatible issue,
    You need to execute command as below:
    1. First Find the file you download,command as below
    cd nvbiosflash
    2. Second, flash the bios
    nvidia NV287MS222.rom
    I understand the commands bit, but how to enter that DOS thing i don't get.
    Need to copy all the files to a bootable usb drive?
    And then it automatically open this dos state?
    Hope you can help med here, never flashed bios on a graphic card before
    Best regards
    Frederik

    Well, it is kind of hard to explain. Allmost everything I do is laggy and slowly compared to how it was before I installed the new graphic card.
    Most noticeable is when moving with windows. It show the movement in frames. Overall it just behaves like if the drivers isn't working. I have tried with the latest driver and one of the latest beta drivers to see if it had any effect. No changes, still laggy.
    To try at show my issue i have uploaded a video on youtube of my screen.
    Here: http://www.youtube.com/watch?v=IVD1OOBbrTM&feature=youtu.be

  • Error when try to start the sap system in SAPMMC

    Hello gurus,
    I´m faccing with a serious problem, I´m trying to figure out a solution for this but I don´t get it!! My God..
    Database - MS SQL 2005
    System- ECC 6.0
    OS- Win 2003 Server X64
    When I tried to start the system by SAPMMC the system keep in with yellow semaphoro.
    I checked some log file such as:
    dev_disp:
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    Sat May 01 04:31:21 2010
    NiIPeek: peek for hdl 2 timed out (r; 1000ms)
    NiIRead: read for hdl 2 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12996]
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
    SiSelNSet: set events of sock 328 to: ---
    NiBufISelRemove: remove hdl 2 from set0
    SiSelNRemove: removed sock 328 (pos=2)
    SiSelNRemove: removed sock 328
    NiSelIRemove: removed hdl 2
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpSemRq: key: 2, units: 1, timeout: -1
    DpSemRel: key: 2, units: 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 2 / sock 328
    NiBufIClose: clear extension for hdl 2
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 3108) [dpxxdisp.c   11183]
    Good Bye .....
    (With continuation...)

    Hi again Gagan,
    More information about that R3trans -d: 
    TRANS.log File:
    4 ETW000 R3trans version 6.14 (release 700 - 03.11.09 - 14:15:00).
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 01.05.2010 - 17:03:33
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  Sat May 01 17:03:36 2010                                                   0  0.000000
    4 ETW000  [dev trc     ,00000]  db_con_init called                                                         0  0.000000
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                                                  0  0.000000
    4 ETW000  [dev trc     ,00000]  Loading DB library 'dbmssslib.dll' ...                                     0  0.000000
    4 ETW000  [dev trc     ,00000]  DlLoadLib success: LoadLibrary("dbmssslib.dll"), hdl 0, addr 00000001872B0000
    4 ETW000                                                                                21568  0.021568
    4 ETW000  [dev trc     ,00000]      using "E:\usr\sap\DEV\SYS\exe\nuc\NTAMD64\dbmssslib.dll"              14  0.021582
    4 ETW000  [dev trc     ,00000]  Library 'dbmssslib.dll' loaded                                            16  0.021598
    4 ETW000  [dev trc     ,00000]  function DbSlExpFuns loaded from library dbmssslib.dll                    15  0.021613
    4 ETW000  [dev trc     ,00000]  Version of 'dbmssslib.dll' is "700.08", patchlevel (0.236)              1248  0.022861
    4 ETW000  [dev trc     ,00000]  function dsql_db_init loaded from library dbmssslib.dll                   20  0.022881
    4 ETW000  [dev trc     ,00000]  function dbdd_exp_funs loaded from library dbmssslib.dll                  12  0.022893
    4 ETW000  [dev trc     ,00000]  New connection 0 created                                                  98  0.022991
    4 ETW000  [dev trc     ,00000]  000: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
    4 ETW000                             reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                                64  0.023055
    4 ETW000  [dev trc     ,00000]  db_con_connect (con_name=R/3)                                             49  0.023104
    4 ETW000  [dev trc     ,00000]  find_con_by_name found the following connection for reuse:                15  0.023119
    4 ETW000  [dev trc     ,00000]  000: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
    4 ETW000                             reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                                32  0.023151
    4 ETW000  [dev trc     ,00000]  Thread ID:2484                                                          1126  0.024277
    4 ETW000  [dev trc     ,00000]  Thank You for using the SLODBC-interface                                  17  0.024294
    4 ETW000  [dev trc     ,00000]  Using dynamic link library 'E:\usr\sap\DEV\SYS\exe\nuc\NTAMD64\dbmssslib.dll'
    4 ETW000                                                                                39  0.024333
    4 ETW000  [dev trc     ,00000]  dbmssslib.dll patch info                                                  32  0.024365
    4 ETW000  [dev trc     ,00000]    SAP patchlevel  0                                                       12  0.024377
    4 ETW000  [dev trc     ,00000]    SAP patchno  236                                                        11  0.024388
    4 ETW000  [dev trc     ,00000]    Last MSSQL DBSL patchlevel 0                                            13  0.024401
    4 ETW000  [dev trc     ,00000]    Last MSSQL DBSL patchno         236                                     12  0.024413
    4 ETW000  [dev trc     ,00000]    Last MSSQL DBSL patchcomment $DBCC() displays binary data as hex. string without 0x (1416409)
    4 ETW000                                                                                21  0.024434
    4 ETW000  [dev trc     ,00000]  lpc:(local) connection used on PTRESAPDEV                                344  0.024778
    4 ETW000  [dev trc     ,00000]  lpc:(local) connection used on PTRESAPDEV                             102948  0.127726
    4 ETW000  [dev trc     ,00000]  lpc:(local) connection used on PTRESAPDEV                              12491  0.140217
    4 ETW000  [dev trc     ,00000]  Driver: sqlncli10.dll Driver release: 10.00.2531                       13539  0.153756
    4 ETW000  [dev trc     ,00000]  GetDbRelease: 9.00.4035                                                 1238  0.154994
    4 ETW000  [dev trc     ,00000]  GetDbRelease: Got DB release numbers (9,0,4035)                           59  0.155053
    4 ETW000  [dev trc     ,00000]  The 7.00 (or earlier) ODBC based DBSL library should not be used for SAP systems running on SQL Server 2005 (release 9.0) or earlier.
    4 ETW000                                                                                25  0.155078
    4 ETW000  [dev trc     ,00000]  Please uninstall SQLNCLI 10 (SNAC10) on this application server.or set environment variable MSSQL_FORCEOLEDB.
    4 ETW000                                                                                61  0.155139
    4 ETW000  [dev trc     ,00000]  For more information please refer to SAP note 1082356                     17  0.155156
    4 ETW000  [dblink      ,00433]  ***LOG BY2=>sql error 0      performing CON [dblink#8 @ 433]             224  0.155380
    4 ETW000  [dblink      ,00433]  ***LOG BY0=><message text not available> [dblink#8 @ 433]                 19  0.155399
    2EETW169 no connect possible: "DBMS = MSSQL                            ---  SERVER = 'PTRESAPDEV' DBNAME = 'DEV'"

  • Display Graphics is not working in ECC 6.0 EHP5 SAP System

    Hello All,
    We have an SAP system running  on ECC 6.0 with EHP5 installed in it.
    In UDM_Supervisor when i click on ALV Display Graphics it is not opening it is throwing the below mention error.
    When i click on the highlighted icon on the top it throws the below error.
    When i click on there is no additional information available.
    I could not locate any  Relevant SAP notes.
    Could you please help me in fixing this error.
    Thanks in advance!!!
    Regards,
    Vardhan.

    Hi,
    I don't have access to my ECC 6 system right now, I would check 2 things:
    1) it is possible that the BAdI definition class (for classic BAdIs, it is usually CL_EX_BATCH_MASTER) has been changed manually by SAP, and they removed the LOOP, or have added an EXIT right before the ENDLOOP. I know they sometimes do it.
    2) I would check if the BATCH_MASTER classic BAdI has been migrated to new BAdI, in that case I think you should migrate your BAdI implementations
    3) Just to be sure: if an implementation raises an exception, that's normal that the other implementations are not executed.
    BR
    Sandra

  • SAP systems and Daylight savings for 2007

    Hi,
    We are discussing about the Daylight Saving time changes in USA for 2007 and its effect on SAP Systems.
    <i>"Beginning in 2007, most of the U.S. will begin Daylight Saving Time at 2:00 a.m. on the second Sunday in March and revert to standard time on the first Sunday in November."</i>
    Wondering, if we need to change any variable settings to take into effect? If so, could anyone give details on it.
    Wondering if SAP systems time is getting sync with Database servers or O/S ?
    Thanks,
    Sam

    Hi,
    The beginning of daylight saving time is normally not a problem as the time will jump from 2:00 to 3:00, so seen from SAP that no problem. You will only have a 1 hour hole, as the system had nothing to do for one hour.
    So there are no settings or so to maintain or change. Just let SAP system run...
    But it is different when switching back to "normal" time, as there you will have the so called double hour, and even as SAP is working on a solution to this, it is still recommended to shut down the SAP system for this period.
    (searching for the term "daylight saving time" in OSS should give you some notes explaining how SAP is handling it)
    As i know SAP system is taking the time from OS, but you can se what time the SAP system has, by in the GUI menu to select the "system" => "Status"...
    (In the Popup you can se it in upper right corner)
    Regards
    Rolf

  • IDOC to File Port on Windows Server from Unix SAP System

    Hi All:
    I want to use an IDOC to create a text file on a Windows server. The SAP system runs on Unix. I have no problem creating the text file on the same Unix server running the SAP instance but I can not figure out how to write the file to a share or UNC path on a Windows server. I tried to create a logical file path using transaction FILE and then create a logical port in WE21. The IDOC failed because it is still looking on the Unix server to write the file. Any ideas from the community would be greatly appreciated.

    Hmmm, there are probably lots of ways to skin this cat.
    To make the process asynchronous you probably want to be along the lines of either updating a table or placing a file on the Windows machine, and then having a database process or Windows program to watch for the file or database table entry and triggering your bat file when it appears.

  • Assignment of One Solution ManagerDiagnostics Agent to Multiple SAP Systems

    Dear Experts,
    according to the Powerpoint presentation attached to SAP Note 1365123, one single Solution Manager Diagnostics Agent can be used for E2E RCA with multiple SAP systems running on its physical host.
    I have installed one Diagnostics Agent on a server where three ABAP systems are running. Each ABAP system on this server has been installed under an alias (i.e. all these SAP systems are reachable under the same IP address. No virtual servers with individual IP addresses have been defined.). I want to configure each ABAP system for E2E RCA. When running the Managed Systems Setup procedure for E2E RCA, I am not able to assign the diagnostics agent to more than one of these ABAP systems - after the first system has been configured for E2E RCA, the entry for the Diagnostics Agent on this particular server is no longer available in the drop-down list of Diagnostics Agents when configuring the next system.
    Is my understanding of the presentation mentioned above wrong, or am I missing a trick here? How can I assign the Diagnostics Agent to all three SAP systems that are running on the same physical host?
    Details about the environment:
    SAP Solution Manager: SAP EHP1 for Solution Manager 7.0 (SP Level 24)
    Diagnostics agent version : 7.01.7.0.20100326100205
    Thank you for your time,
    Rainer Walter

    Hello,
    Have you followed all the rules?
    Rule 1
    Consider the diagnostic agent as a standard SAP system
    Rule 2
    Install one Diagnostic Agent per host (Physical or Virtual) (You mentioned you don't have virtual hosts)
    Rule 3
    Each Diagnostic Agent gets mapped to the SMSY repository using the server name key
    Rule 4
    Do not install a Diagnostic agent on a host that only run databases or SAP Central Services
    Rule 5
    An Agent can only conenct to one single Solution Manager System
    If you install multiple Diagnostic Agents on the same host, each one needs to be connecting to a different Soltuion Manager system
    Rule 6
    Choose the adequate diagnostic agent installer/version
    Rule 7
    In a  switch over scenario diagnostic agent must move with their respective virtual host and managed components
    These are the rules attached to SAP Note 1365123. You need to comply to the rules.
    If you have multiple agents ont he same host, then they need to conenct to different solution manager systems....according to the rules. One agent per physical host is one of the rules...specifically rule #2. This is my take, and it seems pretty clear here.
    Regards,
    Paul

  • Is HAGEO supported for SAP Systems?

    Could anyone enlighten me as to whether HAGEO (or HACMP/XD) is supported for SAP systems? I have a client who wishes to use this and believes it is fully supported. However, I have been unable to find any references to SAP systems running on HAGEO software.
    The IBM competence centre has not so far deigned to respond to my call.
    Does anyone know if it is supported/recommended or actually in use for SAP installations anywhere?
    This provides essentially HACMP over a much further distance than normal HACMP.
    We have proposed a simple HACMP cluster with mirrored disk to a second datacentre to provide DR, however our client thinks it will be cheaper to just have two systems, one in each datacentre, and linked by HAGEO.
    I have my doubts but have no evidence to the contrary currently.
    Thanks
    Andy

    For completeness, the ISCC (i.e. IBM) said (basically) don't do it. Use standby databases.
    What they actually said was that it was a very complex issue and perhaps we should get lots of IBM consulting in to answer this very difficult question.
    But i took the first answer as the likely outcome - don't do HAGEO or HACMP/XD with SAP systems.
    Andy.

  • Database distribution for several SAP Systems

    Hi gurues, we have a very important concern about SAP on Z systems, it is possible/recommended to have on on Z system only one DB engine with several databases that correspond to several SAP Systems running on the machine?
    Because we have AIX platform right now  and we can not have that kind of database landscape, we only can choose between MCOD or one dataabase engine with one datase in one machine (we can not share db engine).
    Hope this question is clear enoguh for you.
    Regards
    Gustavo

    Gustavo,
    Sadly yes. You'll have to forgive some of my terminology. I actually work on the Basis team at my company and I am not a DBA. We happen to be running DB2 z/OS and we are using datasharing. For a sandbox ECC system we might have SID SE1 and DB2 sub-systems SE11 and SE12. For another sandbox BI system we might have SID SB1 and DB2 sub-systems SB11 and SB12. Even if datasharing is not used (and hence the 12 member would not exist, SE12 for instance), I would strongly recommend against MCOD and instead suggest using a different DB2 system for each SAP SID.
    We have spoken to at least 1 customer that implemented their ECC (ABAP only) and Portal (Java only) SIDs as MCOD in the same DB2 z/OS system. Unfortunately, DB2 z/OS has some somewhat arbitrary limits for things like thread storage which MUST exist under the "2gig bar" (apparently due to some 31bit code still in use). Effectively, this limits the number of threads (and in the SAP world the number of SAP work processes) that a single DB2 member can service. I believe the limit is around 800 threads. Of course, with datasharing you can spread the load to multiple instances (SB11, SB12, SB13, SB14, etc), but then you must also plan for extra resources to be available in a planned failover for maintenance type situation. This particular customer ended up needing to fine-tune some java database threads and ended up needing an extra DB2 instance or two to handle the load during maintenance using planned failover.
    Brian

  • Backup message error -SAP system is running or SAP user is connected to dat

    Hello ..
    when the backup started i got this message error ..before starting the backup, the shell shutdown the sap system but below message was showed
    BR0262I Enter database user name[/password]:
    BR0055I Start of database backup: bedvugxg.aff 2010-08-08 05.31.48
    BR0484I BRBACKUP log file: /oracle/AAA/sapbackup/bedvugxg.aff
    BR0477I Oracle pfile /oracle/AAA/102_64/dbs/initAAA.ora created from spfile /oracle/AAA/102_64/dbs/spfileAAA.ora
    BR0068E SAP system is running or SAP user is connected to database AAA - database cannot be shut down
    BR1025I Please shut down SAP system first or use the 'offline_force' option
    BR0056I End of database backup: bedvugxg.aff 2010-08-08 05.31.48
    BR0280I BRBACKUP time stamp: 2010-08-08 05.31.49
    BR0054I BRBACKUP terminated with errors
    [Major] From:  "OMNISAP" Time: 08/08/10 05:31:49
    BRBACKUP /usr/sap/AAA/SYS/exe/run/brbackup -t offline -d util_file -c -m all -u hpbkup/******* returned 3
    i am new on this, what should i review into the db?
    Regards and thanks in advance
    Dma.

    Hello Daniela,
    you try to perform an offline backup (which is a very uncommon way nowadays) and your SAP system is not down.
    This is also described in the official documentation:
    http://help.sap.com/saphelp_sm32/helpdata/en/0d/d309664a0c11d182b80000e829fbfe/content.htm
    offline: Database backup in offline mode, in other words, the database is shut down during backup. When you select this parameter, BRBACKUP checks that no SAP system users are connected to the database. If an SAP System is active, the database is not shut down and BRBACKUP terminates the process with an error message (message number BR0068E).
    Regards
    Stefan

  • Error in "Run Java migration toolkit", doing a SAP system copy.

    Hi all,
    Migration to new hardware with system copy, get an error in CI installation on "Run Java Migration Toolkit".
    From the sapinst.log:
    ERROR 2009-05-13 12:46:47.188
    FJS-00003  TypeError: ci.getInstanceDir() has no properties (in script NW_Doublestack_CI|ind|ind|ind|ind, line 120276: ???)
    ERROR 2009-05-13 12:46:48.318
    FCO-00011  The step InitPrivateContext with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|12|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind|ind|ind|ind|2|0|InitPrivateContext was executed with status ERROR .
    From the sapinst_dev.log:
    ERROR      2009-05-13 12:46:47.188 [iaxxejsbas.cpp:204]
    FJS-00003  TypeError: ci.getInstanceDir() has no properties (in script NW_Doublestack_CI|ind|ind|ind|ind, line 120276: ???)
    TRACE      2009-05-13 12:46:48.038 [syuxctask.cpp:1382]
               CSyTaskImpl::start(bool)
    A child process has been started. Pid = 23620
    ERROR      2009-05-13 12:46:48.318 [sixxcstepexecute.cpp:951]
    FCO-00011  The step InitPrivateContext with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|12|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind|ind|ind|ind|2|0|InitPrivateContext was executed with status ERROR .
    TRACE      2009-05-13 12:46:48.368 [iaxxgenimp.cpp:752]
                CGuiEngineImp::showMessageBox
    <html> <head> </head> <body> <p> An error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > High-Availability System > Based on AS ABAP and AS Java > Central Instance . You may now </p> <ul> <li> choose <i>Retry</i> to repeat the current step. </li> <li> choose <i>View Log</i> to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> <p> Log files are written to /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/HA/AS/CI. </p> </body></html>
    TRACE      2009-05-13 12:46:48.368 [iaxxgenimp.cpp:1255]
               CGuiEngineImp::acceptAnswerForBlockingRequest
    Waiting for an answer from GUI
    I had checked the INSTANCE_NAME parameter, in every profile, and is ok.
    I tried a new instalation, after importing the profiles, and checking the INSTANCE_NAME, but got the same error.
    Please, advice.
    Thanks in advance.
    Best Regards.
    Jorge

    Thanks Manoj for your advice.
    We had already checked the procedures, we are working based on the System Copy Guide: "System Copy for SAP Systems Based on SAP NetWeaver 7.0 SR3 ABAP+Java".
    I had to mention that source and target systems are HP-UX, 11.23, Itanium and the DataBase is Oracle 10.2.02.
    The copy was made from a Central System (ABAP + Java) to a High-Availability System (ABAP + Java), and the problem appeared when copying the Central Instance.
    Thanks in adavance.
    Regards.
    Jorge

  • How to run Depreciation in SAP system when manual posting has been made

    Hi
    My client is posting the dep thro' manual entry every quater from 2003 FY onwards.But untill 2002 they were posting the dep in SAP,due to some issue they started to post the dep manually  and now they want to run the dep in SAP system.
    I am new to AA and i am confused and don't know how to proceed  further.
    If i run the dep  from 2003 period 1,then what will be impact of the same  and the FI books has beem closed but the AA year is still open.
    I though of going like....
    I will retire all the asset as on 31.03.02 without revenue and  purchase the same assets in the current fiscal year (2007) as a in house manufacturing  with the current  book value.
    I don't whether i am correct or wrong, if i am correct/wrong  kindly guide me and the area or implication that i have to take care while  performing the above activity... or any other way/suggestion thro' which i can bring the dep in the system thro' standard way...
    We are in 4.6c version.
    regards
    Praveen

    hi Praveen,
    my advice was to reverse the newly created depreciation posting, not the ones which were created throughout the years periodically.
    if you run the depreciation now and post all values to today, than you have to do the reverse posting today. They should be exactly the same day! If you do the depreciation post for a day in the past, that means (at least for me), that you are allowed to post to that day (both legally and 'SAPally' , and in this case you have create (and you should be able to do so) the reverse posting for that day.
    Come back if you need more clarifications
    ec

Maybe you are looking for