SAP tab is not showing up

Hi ,
I installed Crystal Report s and i installed SAP Integration KIT even though SAP Manu Item is not displaying ,
Please tell me what to do get the Menu Item .
Thanks
Santhosh

Hi,
before installing the SAP Integration Kit you need to make sure you have the SAP GUI with Bex Add Ons for BW 3.5 and BI 7 installed on the client.
Ingo

Similar Messages

HT5019 I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multipl

I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
Thanks,
Toks

Hi Toksyb!
You may want to try clearing out the PRAM on your computer. This process is explained through this article:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Thanks for using the Apple Support Communities!
Cheers,
Braden

Custom Ribbon tab does not show in generic list

Hi.
I'm deploying the following definiton on a generic list, but the new custom tab does not show up. Anyone that can see what I have done wrong?
Thanks!
<Elements xmlns=”http://schemas.microsoft.com/sharepoint/“>
<CustomAction
Id=”Ribbon.MyTab”
Title=”Adds a new Ribbon tab to Generic List”
RegistrationType=”List”
RegistrationId=”100″
Location=”CommandUI.Ribbon.ListView”
>
<CommandUIExtension>
<CommandUIDefinitions>
<CommandUIDefinition
Location=”Ribbon.Tabs._children”>
<Tab Id=”Ribbon.MyTab” Sequence=”110″ Description=”" Title=”My Tab Name”>
<Scaling Id=”Ribbon.MyTab.Scaling”>
<MaxSize
Id=”Ribbon.MyTab.Scaling.MyGroup.MaxSize”
Sequence=”15″
GroupId=”Ribbon.MyTab.MyGroup”
Size=”LargeMedium”/>
</Scaling>
<Groups Id=”Ribbon.MyTab.Groups”>
<Group
Id=”Ribbon.MyTab.MyGroup”
Sequence=”15″
Description=”"
Title=”My Group Name”
Template=”Ribbon.Templates.MyTab.MyGroup.CustomTemplate”>
<Controls Id=”Ribbon.MyTab.MyGroup.Controls”>
<Button
Id=”Ribbon.MyTab.MyGroup.Button”
Alt=”Ribbon.MyTab.MyGroup.Button”
Command=”Ribbon.MyTab.MyGroup.Button_CMD”
Image16by16=”/_layouts/images/siteIcon.png”
Image32by32=”/_layouts/images/siteIcon.png”
LabelText=”Button”
Sequence=”10″
TemplateAlias=”o1″
ToolTipTitle=”Button”
ToolTipDescription=”Shows a dialog” />
</Controls>
</Group>
</Groups>
</Tab>
</CommandUIDefinition>
<CommandUIDefinition
Location=”Ribbon.Templates._children”>
<GroupTemplate Id=”Ribbon.Templates.MyTab.MyGroup.CustomTemplate”>
<Layout Title=”LargeMedium”>
<OverflowSection Type=”OneRow” TemplateAlias=”o1″ DisplayMode=”Large”/>
<OverflowSection Type=”ThreeRow” TemplateAlias=”o2″ DisplayMode=”Medium”/>
</Layout>
</GroupTemplate>
</CommandUIDefinition>
</CommandUIDefinitions>
<CommandUIHandlers>
<CommandUIHandler
Command=”Ribbon.MyTab.MyGroup.Button_CMD”
CommandAction=”javascript: alert('Hello World');” />
</CommandUIHandlers>
</CommandUIExtension>
</CustomAction>
</Elements>

Hello,
I was able to use your custom ribbon tab XML just fine. The only thing is, the copy you provided had a bunch of illegal characters embedded in it (like reverse quotes?), I'm not sure if they're showing up in your version of the XML or not. Anyway,
after replacing those with straight quotes and fixing some other misc formatting, it worked fine. I created an empty SharePoint project and added an empty element, then added your XML to the Element.xml file. In SP, I created a new custom
list and the "My Tab Name" tab appeared with a button that displayed "Hello World" when I clicked it. So, I recommend checking the formatting of your XML. Just look for red squiggles in the editor and fix them.
Regards,
- Kemp Brown [MSFT]

In iOS 7.0.2 All and Missed tabs are not showing call history correctly

In iOS 7.0.2 All and Missed tabs are not showing call history correctly, I have iPhone 4 running iOS 7.0.2 version it looks like there is a bug. Missed call history and All calls (incoming, outgoing and missed) history is not showing properly in a list. Ideally when I click on missed it should show me recent missed call list and when I click on All it should show me (incoming, outgoing and missed) calls list sorted by current date and time.
I would like to request Apple developer team to look into this and fix this bug asap. Thanks in advance.

Hello gnutellabrot
Start with the article below to troubleshoot issues with email not sending and downloading to your iPhone.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for using Apple Support Communities.
Regards,
-Norm G.

UD Insp. Lot stock tab is not showing

Dear Friends,
At the time of UD Insp. Lot stock tab is not showing due to which I am not able to withdraw sample qty ,
can anyone explain how to add this tab.
Reg: T.code - QA11

hi sandip
UD inspection lot tab page will not appear if you have created the inspection lot manually and the lot is not stock relevant
regards
thyagarajan

My SAP MMC is not showing server instance01

Hello Experts,
My SAP MMC is not showing server instance01.
I am running Netweaver 2004s SP17.
It was working fine earlier, and after a system reboot, I tried to start the server again, but MMC does not show server instance in NSP node.
I had tried starting the server from Administrative tools->Services SAPNSP_01
but, its not starting and showing and message as
 Could not start the SAPNSP_01 service on Local Computer.
 Error 5: Access is denied.
where as SAPNSP_00 in Administrative tools->Services started and showing that in MMC console also.
Is there a way for me to fix this?
Regards
Sunil

I managed to fix the problem - I ran sapstartsrv.exe from windows explorer (located in \usr\sap\NSP\DVEBMGS00\exe)
Here I entered the following:
Operation: -Install Service and register COM interface & Start Service
SID: NSP
NR: 00
Start Profile: C:\usr\sap\NSP\SYS\profile\START_DVEBMGS00_<ServerName> (where <ServerName> is your computer name)
User: <ServerName>\<UserName> (where <ServerName> is your computer name, and <UserName> is your windows login name)
Password: windows login password
Startup Type: Automatic

My Option window in Firefox displays only partly. I can't change the download folder. 'Browse' is not showing. And the Advanced tab is not showing either

The Option Window in Firefox is incomplete. It only shows
General, Tabs, Content, Applications, Privacy, Security, Sync
The Advanced Tab is not showing and the Browse button to change download location is missing also.

If you are using an add-on theme switch to the default theme. If that isn't the source of your problem ....
Try the Firefox SafeMode. 
''A troubleshooting mode, which disables most Add-ons.'' 
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Info tab does not show in iTunes 11.1.2 in iPad sync window

I have OS 10.9 on my iMac, iOS 7.0.3 on my iPad, and I'm using iTunes 11.1.2 . I had only one problem syncing my iPad with the iTunes--the info tab does not show in the sync window. Has the method of syncing calendars changed? How can I do this

I found the following in another discussion thread:
If you use OS X Mavericks v.10.9 or later, your contacts, calendars, and other info are updated on your computers and iOS devices via iCloud. For more information, see iCloud Help at icloud.com. (http://support.apple.com/kb/PH12117)
Since I do not use cloud computing for security reasons, I will not be syncing my contacts or calendars between devices. I hope the Apple developers rethink this strategy. Meanwhile I'll figure out a work-around as I have in the past when software has an unfortunate glitch.

Trying to sync photos from iTunes (via iPhoto) to ipad and iPhone. The Photo tab does not show up and no sync occurs

Trying to sync photos from iphoto to ipad and iphone. Photo tab does not show up in itunes under devices.

I had a similar problem (https://discussions.apple.com/message/24525903#24525903)
The solution in my case was to start iPhoto and let it update the library, even thu itunes was set up to sync with Aperture.

ESS tab does not show up after deploying ESS

We did every configuration step for ESS and we had no issue before for other projects.
However this time ESS tab does not show up on EP even the roles are assigned.
ALL Jco tested OK.
What could be wrong?
Thanks for your help.

Jose:
Thanks!
I think I miss
BP_ERP5ESS
BP_ERP5MSS
Because I am at ecc6 enhp4, the matrix at Wiki did not specify above BP version.
Could you tell me what version of
BP_ERP5ESS
BP_ERP5MSS
should be applied to the EP7.01?
Follow up:
Jose: I do see the BP at the same Wiki:
BP ERP05 ESS 1.41 SP04
BP ERP05 MSS 1.41 SP04
BP ERP05 COMMON PARTS 1.41 SP04
I am going to apply them on the portal. Do you agree? Thanks again.
Thanks!

Reporting Tab is not showing in SCSM 2012 SP1 Console

I'm working with SCSM 2012 SP1. But after installing data ware house only "DataWareHouse" tab appares no "Reporting" tab. And it shows below MSG:
And only the below reporting management pack are available in the Data Ware House >> Management pack area.
I already check data warehouse server 'System Center Data Access Service' and 'SQL Server reporting Service', borth are running. But still 'Reporting' tab is not there.
Mithun Dey Web: http://cloudmithun.wordpress.com If this may give your necessary resolution please mark it as Answre.

At last I solve the problem. THere is 2 solution for resolve the issue.
Force start all warehouse job.
Un register and reregistared DataWareHouse againg.
In my case I do the borth after reregister datawarehouse I wait 1hr after that I manualy start the warehouse jobs. And it works for me.
Mithun Dey Web: http://cloudmithun.wordpress.com If this may give your necessary resolution please mark it as Answre.

Excise tab is not showing in MIGO

Here i have created the PO... with TAx code V0 where in Taxes tab it is showing the calculation....
while doing MIGO it should open the Excise Tab right for this material... it is not showing the Excise Tab... and no Accounting doc got generated..
Important thing is i have selected the Free of goods check box in PO....but after selecting the V0 it started calculated the tax all excise duties at 0.....thats wat the client want....

Hi,
If you want excise TAB at MIGO , you need to do following setting:
Select Check box of EI capture at MIGO in following path:
SPRO -- >Logistics general -- > tax on Goods Movements-- >India -- >Basic setting -- >Maintain Excise Groups
Also set entry of 101 MT for capturing Excise in following path:
SPRO -- >Logistics general -- > tax on Goods Movements-- >India -- >Business Transactions-- >Specify Which Movement Types Involve Excise Invoices
Also you need maintaion CIN master data in J1ID for material & vendor.
NOTE: When you use tax code V0, what are the tax components in V0 .......are all 0%!
Regards,
Biju K

Tab does not show when dragged into it's own new window

This happened after I updated to Firefox 8.0.1. Same problem with 9.0.1. I'm on a Mac running OS X 10.5.8. I have not changed any add-ons, plugins, extensions, or anything like that.
Every time a tab is dragged from my main window to form it's own new window, the tab button on the new window does not appear. I only have a + sign showing.
A tab will show when I open a new tab, but the original "tab" does not appear. The + sign also appears on the left side of all new tabs. Isn't it supposed to be on the right?
If I have 2 "tabs" open but only have 1 tab showing and try to close the window, Firefox asks me if I'm sure I want to close the 2 tabs.
Tabs when opening blank new windows work properly. Dragging a tab to an already opened window works fine as well.
Most of the time a tab is dragged out on accident, and it is quite annoying because I can't drag it back into the main window.
Any help or suggestions would be greatly appreciated.
Many Thanks!

I found the cause but no solution, it's actually a plugin that does that: divx plus weblpayer (it gets installed when you install DivX on your system), if you disable it and restart firefox it all works again. But I want that plugin... so DivX need to fix this, unless it is a Firefox bug in its own core... anyway these two together creates the problem.
(I'm running Firefox 9.x on OSX Lion)
I also wish firefox tab tear out tab worked more like chrome's tab tear out, much friendlier...

Arrangement tab does not show when trying to connect macbook air to tv

im trying to connect my macbook air to my tv. the arrangement tab in the display tab in system preferences does not show. help please!

Hey jgomez93!
Here is an article that will help you troubleshoot issues with using external displays:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Command, Tab option not showing all open applications

Hi,
Just upgraded to Mountain Lion and now when using the combination of Command+TAB not all open applications are displayed.
This seems like a bug or am I missing something

I want to add to list as having same issue... Even core Apple programs not showing up (Safari, iPhoto) in Command Tab. But Mail, iCal do show up in Command + Tab. Also noticed that only some applications "minimize window into the application icon", while others get minimized to bottom right of Dock. Additionally no "Show indicator lights for open application" appears for those missing programs. I attempted to select-unselect both of those in the Preferences -> Dock options and restart a few times, with no success.
The same programs missing from Command + Tab are also missing a graphic icon in Dashboard view (only Application Name appears).
Issue is new to OS X Mountion Lion, I did not have that problem before.

SAP tab is not showing up

Similar Messages

Maybe you are looking for