SAP table replicated in HANA Studio not displayed.

Hi Experts,
I have started replication of the ECC table MHND (which have only 350K records) several hours ago through Data Provisioning SLT in HANA studio, but the table replication status was never displayed.
I have refreshed the target schema several times but could not find the table.
Also, the table is is shown as active in DD02L, DD02T.
I do not have access to Replication Server. So, is it possible to see the replication status from HANA Studio?
Thanks,
Krishnendu Roy.

Hi,
if any records are available in RD_ORDER for a longer time, it seems like that there is a connection problem between SLT and HANA.
You find here the action codes: http://scn.sap.com/community/replication-server/blog/2013/06/24/how-to-start-data-provisioning-without-using-the-data-provisioning-ui
M & T inidicate that someone manually or via LTRC started the process.
Best,
Tobias

Similar Messages

SAP special german characters(umlaut) like ü, ö, ä not displayed properly in XML output

Hello Team,
Here we are facing issues while converting SAP tables data to XML file.
the description is not converting properly for the special German characters like ü, ö, ä.
Actual output should be :Überprüfung nach § 29 STVZO
Output Displayed :Ã#berprÃ¼fung nach Â§ 29 STVZO
Can you please look into and help me in this to get correct output .
Thank you.

Hi,
Unicode or Non-Unincode System ?
Displayed where ? SAPGUI ? Print Preview ? Spool-Display ?
And how is the XML file written ? OPEN DATASET ? BAPI ?
At all of these stages it might be either that it is only a display system, like the selected display CHARSET in SAPGUI, when it is a non-unicode system, or simply not coded correctly like OPEN DATASET without specifying the cdepage when necessary.
And it might even be, that even "displaying" the XML File is simply done with the incorrect codepage while the data inside the file is correct.
If you are on Windows, you might even face funny results when saving a simple textfile from notepad with ANSI/DOS and both Unicode variants and then go to CMD.EXE ans simply "type" the content.
All 4 results will be different, allthough notepad will display the same stuff.
So first of all, makes sure which codepage is relevant at all stages from DB-table to "display"
- DB-Charset
- SAP system type (unicode/non-unicode)
- SAP codepage (1100 / 410x )
- crosscheck the test from report RSCPINST
- Codepage on Windows running SAPGUI
- Selected codpage for Sapgui
Good hunting
Volker

HANA Studio not responding

Hi HANA Experts,
Since yesterday afternoon, after i add a system in HANA Studio successfully, Whatever I add Package in the System content or activate xsjs files in Project, it will cause not responding or file activating stops at a certain percent. I have modified hdbstudio.ini file's -Xmx value from 512 to 1024 and also reinstall HANA studio. But it still cannot work.Before yesterday afternoon, HANA Studio works fine. Any suggestion to solve this problem? thanks
BRs,
Wenwen

Hi Tarun,
Thanks for your reply. I use CloudShare, after I restared HANA Studio in CloudShare, my problem is resolved.

SuPM - Data from SAP BW Query(Automatic) and Manual not displayed in KPI

Dear Forum,
I am also, currently working on a project implementing BO SuPM Version 1.0. Landscape is ECC -> BI -> SuPM dashboards.
I have created a KPI in SuPM dashboard.
Case 1 : Automatic data collection - This KPI is marked for Automatic data collection. So, maintained Scripts with Connectivity and SAP BW Query name. I save this KPI and include in a new report and Run it. There are no records displayed.
Case 2: Manual data collection - This KPI is marked for manual data collection. So, maintained values in SuPM portal itself. I save this KPI and include in a new report and Run it. There are no records displayed.
Could you please help me how KPI in SuPM be filled manually and automatically ( from BW Query)?
Thanks,
Best Regards
PhaniRaj

Dear Phani,
First of All, you should have a framework created and assign the Core KPI to that framework and specify the frequency of the framework (Say Monthly) and Activate it.
Upon Activation, if it is a Manual Data Collection, then you should perform Role Assignment ie specifyinfwho would be the Business Contributor & Approver for ur Manual KPI.
After this, you have to run this program [/SRCORE/DATAREQUEST] in SE38 in the backend system which wil create a data request,
Later you should login as Business Contributor and go to MY Data Requests and then provide the data for the Month specified. Then login as Approver and under Approvals option, you should Approve the data. Now, you should go to SuPM application and select that Month in the dimension and KPI and then RUN the Report.
For Automated Data Collection, you should have to initially creata a Query (SAP/ BW) and specify the name of the query in SPRO--> Sustainability Performance Management --> Automated Data Collection --> Maintain Queries (SAP/ BW) --> Specify that Query name and the Connector ID (SM59).
Now go for KPI creation and specify the Query name in the KPI and then Assign the KPI to the framework and activate it.
Upon Activation, You should RUN the program /SRCORE/AUTO_DATA_COLLECT. Now, select this KPI in the report and RUN the report.
If you perform these actions, you will get the values in the report.
It can be checked in the backend application, either by checking the Process chain[RSPC] or by checking the Infocube if the data is loaded into the Infocube or not.
Let me know if you face any problems...
Regards,
Raghu

SAP 3D Visual Enterprise Side Panel not displaying JT file

We are trying to use the SAP 3D Visual Enterprise Side Panel from transaction CV03N. The Side Panel display. However, all of the various sections of the Side Panel are empty. Any suggestions of how to resolve this problem would be appreciated.
We traced the interaction between the browser and the server using Fiddler. We can see a web service call going out to sap/bc/nwbc/nwbc_ext2int. When we look at the calling parameters (see below), only the Document Number (DOKNR) field is being passed. Shouldn't the Document Type, Document Part, and Document Version be part of the call?

Hi Steven,
I don't know what version of SAP 3D Visual Enterprise Viewer being used, however please can you make sure you are using the most up to date version and patch level available via the SAP Service Marketplace and reassess the issue above again thanks. If this does not resolve I would advise you to create an Incident in the SAP Support Portal under component CA-VE-VWR (Embedded Viewer)
Kind regards,
VE Support Team

Keeping table description on change and not displaying NULL values

I have the table grouped by BFY and then showing by fund. I can only get the description section to show up for the first fund and then when it changes funds nothing shows up. Then when the year changes again it appears.
ex.
BFY: 2005: 0100AXXXXD
but when the fund changes from 0100AXXXXD........nothing shows up.
Also I wanted to not include any funds/years that are null. I had the following code in but it isn't stopping the null values.
<?if: SEC_ZERO_INDICATOR !=0?>
Thanks for any help.

Need to see your xml data structure. Can you send me the xml and RTF file to [email protected]? I will take a look.
Thanks,
Bipuser

Table in scrolling sidebar does not display in Preview

I pasted a table into the scrolling sidebar widget, it see the table fine in iBooks Author, can edit it and everything. I send a preview to my iPad and the whole widget appears as a blank but if I scroll through, I do see a scroll bar so the widget is not empty, but the content is invisible. I do see the content while the page is loading and in the table of contents when the page appears as an icon.

Thanks ssprengel. There seems now to be two different 'full screen' modes. Pressing the Shift and F keys changes what you see. I'm used to only pressing the F key. Now I am able to view the side bars, as well as the top and bottom bars, when I wish. However, maybe a bug, maybe not, the right bar does not come into view when the curser hovers over the left hand side. The three other side bars, top, left and bottom, do become visible when curser hovers over the respective areas. Thanks to your help this is no longer as important an issue (for me at least). In the Window menue you have the Screen Mode which gives you all the options. Thanks again.

Table created in visual studio not shown in portal

i created a table in vs2013 for my azure sql database.
the update completed successfully so the new table must be up there somewhere,
but when i go to the portal, it is not shown.
why?

Hi,
Based on your description, you have seen the database update has been completed successfully from data tool operations, as far as I know, it means that your azure sql database has been updated, and the table you created must exist in azure portal,
I tried on my side, everything worked as except, please check your azure sql connection, and clean cookies and sessions, then open azure sql management portal again.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SAP BI - Hierarchy Characteristic Node key not displaying Web Analyzer

I am using 0COMP_CODE as a characteristic node in my 0COSTCENTER hierarchy. Using BEx analyzer works fine, but in Web Analyzer the 0COMP_CODE key shows as a "#" in a query display regardless what I set the characteristic or hierarchy node to display.
Thanks in advance.
Tom

Hi,
If S0001 is a subtree node of A0003, then change the 'type of authorization' to 1 (subtree below node) for A0003 in your analysis authorization. Currently in your case, I guess its 0- selected node only (default type).
Thanks
Sandipan

CS4 table borders visual aid does not display

I am using CS3 and now CS4 (upgrade) on an Mac with a website
built on tables
The background to the page is 'black'
In CS3 the table borders appear using the visual aid as
'white on black'
In CS4 they don't appear as they seem to be 'black on black'
Does anyone know how to change this behavior???

There are many things about the Mac platform's UI/OS that are
different.
For example, you cannot import a Word Document on the Mac OS
but you can on
the PC.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Osgood" <[email protected]> wrote in
message
news:ghnt1q$rid$[email protected]..
> pr-photo wrote:
>> Thanks for the replies guys
>>
>> I'm still new to the Html stuff but it appears that
my software testing
>> skills are still on the ball.
>>
>> A Case has been opened for visual aids on a 'black
background'. This is
>> ok on windows machines but seems to be an issue on
Mac OS x
>>
>
> Yep I was testing on Mac. That really is a basic and
poor error on Adobes
> part. How that wasn't picked up at beta stage is beyond
me to be
> honest....or it was and they couldn't put it right on
the Mac platform in
> time for release.
>

Excise duty @10% not displaying in printpreview----SAP INVOICE

Dear experts,
Here in Sap invoice Excise duty @10% is not displaying in the printpreview. I tried debugging in Report program, but couldn't able to find the solution. so please give me the solution with step by step, Because am new to this one.
Thanks & regards,
selvakumar.

Hi ravi,
   Yes ofcourse am using smartform, Here in billing document(invoice) printpreview. there are some excise columns like edu cess,vat and all. The same ''excise duty @10%'' and the value of the excise duty also not displaying in the billing document printpreview.....I have debugged smartform nothing wrong with smartform. So there amy be some problem with the abap editor.
I have the conditions like Wa_final-exp ne intial
                                         Wa_final-fkart ne 'yrmf'
                                          Wa_final-fkart ne 'yctf''.
please let me know what is the problem in it.
Thanks & regards,
selva....................

User-Defined Type does not display values in Table Data grid

I have a User defined Type that is a collection of one character VARCHAR2 values. In the Table Data grid it does not display the character values. I know on all our other Oracle development applications these values display. Is this a bug or is there a snippet to display these values?

Version: 1.0.0.15
DB: 10.2.0
Workstation OS: Windows XP

It can not displayed sap script

i have to post invoice in vendor a/c,then run to APP successfully,then execute spool,actually hear it can displayed ABAP list file, SAP script(otf) file,and SAP script file(otf) but hear only displayed ABAP list file, SAP script(otf) file it can not displayed vendor payment advice list why. pls give me answer

Hi Shirley,
I assume the hardware is less on the target than on the source or they are different at least in terms of hardware specs
If the system is not starting, check the dev_disp.log, the stderr* files, and the dev_w0 log from the work directory to find the exact error. Does the system start if you increase or decrease this value?
Regards,
Paul

Vendor Ref. no. not displayed in print preview in vendor aging report

Dear SAP team,
Vendor reference number is not displayed in print preview/print on vendor liabliteis aging report,
but this vendor reference number actually show in report,We are taking report by journal postings,
vendor reference entered in NumAtCard in AP invoice get copied to Ref2 in Journal Entry,then
why it is not showing in print preview/print.
Whether this is an application error / missing functionality ?
We are using SAP Business One 2005 B (7.40.252) SP: 00 PL: 36.
Whether upgrade to latest patch 2005B PL46 will solve this issue ?
Jeyakanthan

Hello Jeyakanthan,
I would like to draw your attention to the enhancements we delivered within Aging Report in 2007 version and plan for 8.8 release.
The primary enhancement in 2007 version is reflecting new concept of Internal Reconciliation with more convenient backward reporting.
Within the 8.8 release ...
- when you generate the aging report you can group the report by customer or sales employee in the customer receivables aging report, and by vendor or buyer in the vendor liabilities aging report;
- when the aging report has been generated, you can view multicustomer/multivendor detailed information in the aging report window. There is no need to double-click each customer/vendor row to view the details.
We would strongly to recommend you to upgrade to 2007 version or join the ramp-up of 8.8 release soon.
Peter Dominik
B1 Solution Management

Integration Process is not displayed in SXI_CACHE

Hi Experts,
I am getting the below eror when I try to excute the SOAP -> JDBC BPM scenario
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
The integration Process is not displayed in the SXI_CACHE. Done with all type of cache refresh, restarted the server also.
What could be the problem?
Earlier I was getting the similar error for non-BPM scenario, just refreshed the cache in Admin, IR, ID and in SXI_CACHE and it solved the issue.
But here the Integration Process is not displayed after doing the above step.
Note: Always the SXI_CACHE is in ERROR status(Red color symbol)
Everytime before executing the scenario, I refresh the cache in SXI_CACHE. Once I done with the refresh, I get the belwo status
1. Cache contents are being refreshed (Yellow color)
2. Error during last attempt to refresh cache (Red Color)
Please share your suggestions to solve this issue.
Regards
Sara

Hi Sara
Go to SXI_CACHE , then from Menu XI Runtime Cache choose Start Delta Cache RefreshF6. Try this, , After clicking wait for sometime to refresh.
Path Prefix set to /dir/CacheRefresh.
https://websmp204.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
Also check out the role of the user using SU01. are you using PIISUSER?
Also refer:
How to handle cache in PI - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34
Thanks

SAP table replicated in HANA Studio not displayed.

Similar Messages

Maybe you are looking for