Sap tm 9.1 issues

Hi,
Can the experts inform how we resolve the issue that when I press on any master data/transaction data from NWBC , the system is going on in endless loop and this is occuring in IE and currently occuring in firefox browser version also. Any settings we need to check from browser or compatibility perspective

Hi Sarvanna,
9.1 Certification is not out yet.
Its still 9.0
narender

Similar Messages

SAP HR Active Sync Issue

Hi,
I encountered SAP HR Active Sync issue: The IDM seems can't receive the IDOC but SAP side says the data already passed to port OK.
I enabled the verbose mode of the Active Sync logs and it is repeating:
2009-06-04T17:07:08.750+0800: IDOCs of message type HRMD_A will be processed.
2009-06-04T17:07:08.750+0800: {jco.server.gwhost=10.153.3.20, jco.server.progid=IDMRFC, jco.server.gwserv=sapgw01, jco.server.trace=1, jco.server.unicode=1}
2009-06-04T17:07:08.750+0800: Started IDocServer (IDMRFC)
2009-06-04T17:07:08.750+0800: Done initializing SAPHRActiveSync resource adapter.
2009-06-04T17:07:08.750+0800: SARunner: loop 0
2009-06-04T17:07:08.812+0800: Started, paused until Thu Jun 04 17:07:08 GMT+08:00 2009
2009-06-04T17:07:13.812+0800: Pause completed
2009-06-04T17:07:13.843+0800: Polling
2009-06-04T17:07:13.843+0800: Poll complete.
2009-06-04T17:07:13.843+0800: SARunner: loop 1
SAP side transaction WE02 shows the IDOC:
IDoc sent to SAP system or external program: Data passed to port OK
SAP HR Active Sync resource reference says:
1. Enter transaction code PFAL.
2. Insert the Object Type P for person objects.
3. Enter an Employee's ID for the Object ID or select a range of employees.
4. Click Execute.
5. Ensure that the status is set to passed to port okay.
6. The IDoc has been created. Check the Active Sync adapter log file to verify that
an update was received.
Now why I can't see the IDOC logs in the active sync adaptor log file?
Thanks!

Hi Wushilin,
Did you ever find a solution to this?
Thanks

SAP GUI with SNC logon and Hummingbird Exceed - SAP GUI window size issue

We have discovered an issue when SAP GUI 7.10 is used to logon via SNC and Hummingbird Exceed is used on the same workstation to logon to a UNIX system either via x-windows or telnet.
When the user logs onto a UNIX system using Hummingbird Exceed, then uses SAP GUI to logon to a SAP system with SNC authentication, the SAP GUI authentication works, but the favourites list is not fully displayed and has to be resized before any of the entries are available.
Has anybody else seen this issue, and do they know if there is a fix available ? We wondered if there might be an issue with fonts or some other sort of conflict between Exceed and SAP GUI, but it is strange that the problem only occurs if SNC authentication is being used, and when userid+password is used to logon to SAP the problem does not occur.
Cheers,
Tim

Hello Tim and Wolfgang,
I was curious too as I found it interesting... so I tested a few combinations, but could not reproduce what Tim has described, at least not before my CPU reached 100% and the applications stopped responding (~2GHz processor, 1GB RAM, 48 kbps connection, latency ~ 2 x width of the Pacific Ocean, but Backend 7.00!).
However I did notice some indications which might be a help (based on 7.00!):
Back in 4.?? there was a problem in that large menus could not be searched(!). Sorry, I don't have access to SAP now, but from memory the note # was 444043 (or very similar) and introduced a form routine for large menus - from a printscreen I still have the message number which led me to the note - 'I476(S#)'.
The system certainly distinguishes between MENU_TYPEs and the above note corrections could be found in several locations relating to the SAP menu 'S', the role menu 'A' etc, but I could only see that for favourites 'F' this is implemented for the menu search (when searching, not when loading).
@ Tim: Ask you customer to create a favourites menu which only has 1 node or max 2 (certainly not more than 4!) and ~ 20 executable objects in it (not more than 30!)? Can they under any conditions achieve the described problem with such a menu?
If not possible to reproduce, then the closest I could guess is a maximum limit of 4 nodes and max 30 objects for a 'F'avourite menu, before it is a minimum candidate for "performance problems" and consideration to be converted to a role ('A'ctivity group) menu instead.
Sorry that I can only help by speculating, because I could not reproduce what you have described.
Hopefully this problem will not happen to me in the New Year, and hope you will solve it for the rest of the year
Cheers,
Julius
Updated memory (not RAM) by: Julius Bussche on Jan 3, 2008 9:07 AM

Mail attachment generated in UDF in SAP PI 7.1 - Issue with line feed

Hello,
Situation is:
Implemented a scenario in SAP PI 7.1 with a mail receiver following this thread:
/people/samuel.chandrasekaran2/blog/2008/10/06/xi-mail-adapter-dynamically-building-attachment-and-message-body-content-using-a-simple-udf
which is about moving message lines from sender into an attachment forn the receiver mail.
It is working great!
The receiver gets the mail including the attachment with all added lines.
But when opening this mail there is an issue depending on the program we are using to open the attachment
which is defined as txt file
- Using MS Editor 5.1 (Windows XP 2007, SP3) the Carriage returns and line feeds (added with
in the UDF) to separate the message lines are not recognized. In the Editor each
    is shown as □   within the text. Word wrap (flag set in the editor) is different to the carriage return/line feeds set in the file.
- Using MS Notepad 5.1 (Windows XP 2007, SP3)   situation is the same but
    is NOT shown as □ , it simply seems to be unvisible. Word wrap (flag set in the editor) is different to the carriage return/line feeds set in the file.
- Using Word 2007 the carriage returns are recognized and used in a correct way to display the file content. But now mutated vowels (äüö) are not recognized. They are displayed as
So I followed this thread:
http://help.sap.com/saphelp_nw04/helpdata/en/96/f04142099eb76be10000000a155106/content.htm
Nice....
In the editors there is no change, but when opening the file in Word it asks now how to convert the file content
(proposing UTF-8) and Word recognizes mutual vowels.
But there seems to be a side effect....
Following the second link, PI recognizes an error.
This is the error message.
MP: exception caught with message Null as XI message received (PrincipalData in ModulData is null)
Adapter Framework caught exception: Null as XI message received (PrincipalData in ModulData is null)
Delivering the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.Exception: Null as XI message received (PrincipalData in ModulData is null).
But the message is sent to the mail recipient which could be ok if PI would not repeat the mail sending now for several times.
So we will receive not one but a number of mails.
So we removed the modul recommended in this help link from the channel.
Result: Behaviour in Word changed now to the described one. But the errors are no longer coming up in channel monitoring incl. message send repetition. So this is a first success. But the partner wants to process the files first with one of the named editors. So we are looking for another solution now to fix the last issue!
Your ideas are really welcome!
Best regards
Dirk

Hi,
as I found this in wikipedia:
Another common problem is the use of '\n' when communicating using an Internet protocol that mandates the use of ASCII CR+LF for ending lines. Writing '\n' to a text mode stream works correctly on Windows systems, but produces only LF on Unix, and something completely different on more exotic systems. Using "\r\n" in binary mode is slightly better, as it works on many ASCII-compatible systems, but still fails in the general case. One approach is to use binary mode and specify the numeric values of the control sequence directly, "\x0D\x0A".
Back to my issue:
In the UDF I am adding "\r\n" but only the "\n" seems to survive!
In Mapping test line feeds are available and the lines are shown as expected.
Using Notepad ++ to open the created txt file from the mail shows that LF is in the file at each end of line but CR is missing.
CR is only at the end of the last line in the file and is not from the UDF that creates the mail or the UDF that creates the attachment lines. Seems that this is added somewhere else behind the mapping.
This is what I found in galileo computing
(http://www.galileocomputing.de/glossar/gp/anzeige-11241/FirstLetter-Z, SORRY, only available in german language!):
In Parsing of XML-Documents the XML-Parser changes the end of line delimiter internally in general to a simple line feed (LF, #0A) as usual in UNIX. ..... In Windows this could result in problems with readability of source texts (e.g. in Notepad) which can be solved by choosing the right editor.
My target application is on Windows and not able to "choose" the right editor (PI system is on windoes OS too) !
But Im wondering where the CR at the end of the text comes from when all the \r\n will be replaced with \n as described.
Ideas are really welcome!
Best regards
Dirk
Edited by: Meinhard Dirk on May 31, 2011 2:45 PM

Project Structure in SAP R/3 Replication Issues

Hi All,
I have some of the Issues while creating the Project Structure in cProjects.
1) The Project Structure getting generated in SAP R/3 is only mappped with WBS elements, why not Networks and Network Activies.
e.g
*cProjects SAP Project Systems*
Project Definition -
> Project definition
Phase----
> WBS Element
Task----
>WBS Element
Mirrored Task----
>WBS Element
Sub Task----
>WBS Element
Checklist----
>WBS Element
Checklist item----
>WBS Element
Is this the standard feature or whether we can create the Network and Network Activites for Tasks and Checklist??
2) The Numbering of the Phase, Tasks, Sub tasks, hecklist etc... all are of some 24 digit numerals, Can we automate the numbering like, the WBS element at level 1 should copy the project definition number and some extension...
3) the Project generated in SAP Project Systems i.e the WBS Elements has status "MDLK" Master data locked.... Why is this set. Is it standard? Can we eliminate this?
Hoping for answers from you all.
Thanks & Regards,
Stephen

Hi Stephen,
1) The Project Structure getting generated in SAP R/3 is only mappped with WBS elements, why not Networks and Network Activies.
e.g
*cProjects SAP Project Systems*
Project Definition -
> Project definition
Phase----
> WBS Element
Task----
>WBS Element
Mirrored Task----
>WBS Element
Sub Task----
>WBS Element
Checklist----
>WBS Element
Checklist item----
>WBS Element
Is this the standard feature or whether we can create the Network and Network Activites for Tasks and Checklist??
>>>> I think, you use cProject 4.0, as in cProject 3.1 it is possible to get object be replicated as PS activity.
Reason: The prupose of the replication is the costs-integration.
2) The Numbering of the Phase, Tasks, Sub tasks, hecklist etc... all are of some 24 digit numerals, Can we automate the numbering like, the WBS element at level 1 should copy the project definition number and some extension...
>>> You can implement a Badi to apply your own logic. There is a Note to give you instruction how to do it. If you fails to find it, please let me know. I will search it.
3) the Project generated in SAP Project Systems i.e the WBS Elements has status "MDLK" Master data locked.... Why is this set. Is it standard? Can we eliminate this?
>>> As the WBS is automatically created via integration. Use this status to prevent the user change it by mistaken. To behonest, I do not this logic, but it is standard behaviour.
Kind regards,
Zhenbo

SAP Content Server Connectivity issue

Hi Friends,
We have installed Content server 6.40 on a standalone server after the installation i tried to open below link but its not opening.
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo
This content server has to be connected to R3(ECC 6 EHP4 ) hence we went to t codes OAC0 and OACT to create content repository
We have created a content repository as below
Content Rep.    ZDMS
Description     ZDMS
Document Area : DMS document management system
Storage type: 04 HTTP content server
Version no.     0046   Content Server version 4.6
HTTP server     192.168.30.12(where the content server is installed)
Port Number     1090                        SSL Port Number
HTTP Script     ContentServer/ContentServer.dll
Phys. path      D:\usr\sap\FNS\SYS\global\
and when i am checking i am getting below error
Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_CONNECTION_FAILED
i have also created a entry in table SDOKPROF
as below but still same issue.
NAME = USEHTTPPLG
VALUE = OFF
and also we have run RSHTTP05 to check if any error but no errors.
Even when we are going in t code CSADMIN we are getting same error
Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_CONNECTION_FAILED
In dev_icm belwo error is showing.
** WARNING => Connection request from (2/3/0) to host: xxx.xxx.xx.xx, service: 1090 failed (NIECONN_REFUSED)
[Thr 5352] {000102ca} [icxxconn.c 2271]
Kindly help to solve this issue.
Thanks
Basis

Hi Deepak,
Thanks for your inputes i checked IIS and after the content server installation these website were not created hence i created it manully as per note 1823408 - Manual Creation of Website on Windows 2008 Server
I created SAP_Content_Server by following first 3 steps but after that 4 , 5 and 6 steps are not clear i dont see those option in ISS manger.
1. Go to Internet Information Services Manager from Start Menu >> Admintrative tools >> IIS manager
a) or Start Menu >> Run >> "Inetmgr"
2. Right Click on Sites >> "Add Website" to create a new Website.
a) Site name <Name of the webiste>
b) port <Port No>
c) Physical Path <path of the Content Server installation directory>
d) Application Pool >> Select "DefaultAppPool"
e) Click "OK"
f) Website will be created.
3. Right click on the newly created website >> "Add Application"
a) Alias "ContentServer"
b) Application Pool >> Select "AppPool_ContentServer"
c) Physical Path <path of the Content Server installation directory>
d) Click "OK"
Content Server Application will be created.
4. Double Click on the website >> Handler Mappings
a) Select "ISAPI.dll" from the list >> Edit Feature Permissions
b) Check the tick boxes for "Script" and "Execute"
c) Click "OK"
5. Double Click on the website >> Handler Mappings
a) Enable "Anonymous Authentication"
b) Enable "Basic Authentication"
c) Enable "Windows Authentication"
6. Double Click on the IIS Server name >> ISAPI and CGI Restrictions >> Click on "Add"
a) ISAPI or CGI Path <path of the Content Server installation directory,selecting "ContentServer.dll" >
b) Description "ContentServer.dll"
c) Check the tick box "Allow extension path to execute"
d) Click "OK"

Payment document which are posted in SAP , however cheque not issued

Dear Experts,
How to generate a report of payment document which are posted in SAP , however cheque has not been issued.
Regards,
Alok

Hello,
Execute the Cheque outgoing account in FBL3N
Click on Settings => Special Fields
PAYR CHECF Check number from
Save
Now re-execute the report
Add the Check number from field into the layout.
You will see the for which documents cheques are beings issues and for which documents cheques are not being issued.
Regards,
Ravi

SAP NW BPM deploy issue

Hi Gurus,
I got an issue of SAP NW BPM deployment after I developed a NW BPM process example. The BPM example is used for interacting with SAP PO AEX for message orchistration. I paste the error text as below, hope someone could help me:
=========================================
Status ERROR
Plugin : com.sap.ide.tools.services
code=0
Deployment problems
children=[
Status WARNING
Plugin :
com.sap.ide.tools.services
code=0
DC test_example_0/bl/ddic does not contain any archives for deployment
Status WARNING
Plugin :
com.sap.ide.tools.services
code=0
DC test_example_0/bl/caf/dictionary does not contain any archives for deployment
Status WARNING
Plugin :
com.sap.ide.tools.services
code=0
DC test_example_0/bl/caf/metadata does not contain any archives for deployment
Status ERROR
Plugin :
com.sap.ide.tools.services
code=0
Deployment failed
com.sap.ide.eclipse.deployer.api.APIException: System Local/POD not responding.
at com.sap.ide.eclipse.deployer.DeployerPlugin.getCurrentServerInfo(DeployerPlugin.java:94)
at com.sap.ide.eclipse.deployer.DeployerPlugin.getClient(DeployerPlugin.java:246)
at com.sap.ide.eclipse.deployer.DeployerPlugin.getClient(DeployerPlugin.java:218)
at com.sap.ide.tools.services.dc.EngineDcDeployService.deployFiles(EngineDcDeployService.java:255)
at com.sap.ide.tools.services.dc.EngineDcDeployService.deploy(EngineDcDeployService.java:135)
at com.sap.ide.dii05.ui.internal.actions.dc.DcDeployAction$5$1.run(DcDeployAction.java:282)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
=======================================================
Thanks a lot in adv.
regards.
Rajesh

Hi,
Check below thread .
BPM deployment failed
Regards,

Errors with SAP GUI 7.10 issues with IE 7.0? and most curr patches?

We are attempting to patch our SAP GUI 7.0 with the most recent GUI patches
GUI patch 12
BW patch 500
BI patch 900
we are applying these patches to correct the following
>preview and printing of blank pages with web browser(ie 6.0)
>german lang. toolbar appearing
>missing active components when using analyzer (BW 3x)
>BI rspc error 'x dump'
these issues above have been corrected, however we are now having issues with this GUI and IE 7.0 , printing errors
As anyone had these same issues above, and could you recommend on what patch combination (if any) have corrected them
We have worked on this project for the last few months, to get the correct combination of patches that would not break anything else installed. But, now we are finding that we may have issues with IE 7,0 and the SAP GUI with the above patches.
Please advise
Maria

what happens on the desktops with IE 7.0 is that it looses printing capabilities.

Payment Wizard SAP B1 2005 PL23 Issues

Hey Friends,
I asked about this issue twice already but I still don't have any solution yet.
When I do the Payment runs, the payment wizard either:
Randomly executes only some of the recomended payments
or
does not execute any of the recomended payments at all.
The wizard sometime recomends non selected payments.
At stage 9 of 9 of the payment wizard, when I choose to see the non-included transaction report, I get the message "No Data".
Please any suggestions to help me resolve this issue will highly be appreciated.
Kind Regards
Chike

Hello,
Have you tested the issue still exists on the latest patch for 2005 A SP01? Many payment wizard issues were fixed in later patches which may alos resolve your issue.
Regards,
Paul Finneran
SAP Business One Forums Team

SAP Query selection screen issues after ECC upgrade

Hi all
We have a custom query created and assigned to a custom transaction code, which after upgrade to ECC 6.0 we find that the selection screen layout is different from what was available in 4.6C system.
All the fields required are available.
However, the sequence of the fields on the screen is different from the 4.6C after the upgrade.
Can anyone help identify the issue so that the issue can be resolved?
Thanks
Vinodh S

Hi N_niki
There is no resolution as such.
We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
Hope this helps.
Thanks
Vinodh Sudhakaran

SAP and SQL DB13 Issues

I am experiencing issues with DB13.
In Calendar Scheduled backup Jobs showing red when job is running and not dark blue, job does go green when finished. Some times it will just stay red even though in SQL it reported a success.
Any help would be grateful
Running SQL 2005 SP3, Windows Server 2003 X64, SAP ECC 6.0,

Hi David,
Some times it will just stay red even though in SQL it reported a success.
It wont happen.Once it turned to red means, its already failed.No need to expect it will turn in to green.
Check the log once again.Double click that entry (red) you will get the log.
While backup is running, you can observe light orenge at your schedule date.If that backup success it will turn in to green and if that backup fails it become red.
Thanks & Regards,
Nagendra.

SAP connected fax machine issue

Hi All ,
Need to know where the fax machine settings are made . Issue is one automatic cover page is coming with To address as SAP while sending fax . Need to know where we can disable that.
Thanks & Regards ,
Sabu.

Hi check the processing routines in NACE Txcode.
Cheers!!
Balu
Edited by: Balu CH on Oct 21, 2008 6:08 PM

SAP script printout alignment issue

Hi Experts,
I have facing one Script Printout Alignment issue.
SAP Script Form printing some Values in Table format.
While debugging( in debug mode ), I am getting the correct Alignment ( Proper table format with values ).
But in printout the Alignment( The vertical and horizontal lines are not printed properly ) is not correct.
Thanks in Advance.

HI Glen Anthony,
I am not using any printer details.
from the Spol (SP01) I am checking the print priview.
Success in debug mode but not in Print.
Please suggest.
Thanks

SAP SCRIPT Barcode Printing Issues

Hi ,
I'm printing 3of9 , barcode in sap script, which has width of 1CM and height of 1CM, the problem is once it's printed, barcode is being printed at higher position than it's supposed to be and creating alignment issues and also introduces blank lines in between .
Has any opne faced this problem , and how to over come this.
Regards,
Raghavendra

With SAPscript, barcodes are produced only by each printer (according to BarSimm or whatever technology you use). The preview is just an approximation made by SAP. So, you must trust your printer and adapt your SAPscript until it prints correctly.

SAP PS external activity issue

Hi All,
I am new to SAP and i am trying to create a project using wbs elements, When i assign external activity to a wbs element and save it , its not getting saved instead it displays ABAP page as ABAP DEBUGGER(1) Exclusive (SRTITSOL_SRY_55). I am attaching the image, SAP Guru's please help.

Hi,
Please ask your Abaper to remove this break point but you can also tackle this issue at your functional level.
Click on Debugger at the top menu and from there you can choose either Continue by pressing F8 button (which is nothing but execute button) or you can also choose Exit Debugger from that menu where in an option will come whether you really want to exit debugger then click on Yes.
It wont hamper your work and you will proceed further.
Regards,
Amit Rajoria

Sap tm 9.1 issues

Similar Messages

Maybe you are looking for