SAP TMKSVR error
Hi all,
I will be installing SAP Solution Manager 7 to V5R4 iSeries server but upon installation of TMKSVR, it's giving an error in phase CHECKING INSTANCE
"An error ocured during installation (send TMKMessage:" could not send message, no connection available.)"
I already copied all the MASTER, KERNEL, LANGUAGE, and JAVA cd's in the server. I also updated to the latest ISERPACK8 for Solution Manager/iSeries V5R4 version. Tried run the installation in Windows XP and Windows Vista but the same error occurred.
Hope you can help me resolve the error.
Thanks,
John
Hi:
on iseries you should check the following:
execute: CFGTCP
Then option 10 --> in hosts table check if you have:
::1 IPV6-LOOPBACK
IPV6-LOCALHOST
127.0.0.1 LOOPBACK
LOCALHOST
xxx.xxx.xxx.xxx <servername> ex: server01
<servername.domain.com> ex: server01.mycompany.com
xxx.xxx.xxx.xxx <server_windows> ex: windosxp
After that option 12 -->
Name of the principal system --> <servername> ex: server01
Name of the domain ---> <domain.com> ex: mycompany.com
Please, be very carefull and extrict this Uppercase o Lowecase
After that in the Windows PC --> edit hosts file and put the same information.
i think that is all....
Bye
Similar Messages
-
Hi All,
We are developing Report on SAP Payroll log with the error message . Is any table exist in SAP where we can get the standard error message repositery and then convert it in the User freindly error message ?
Thanks
HHello hg,
Before developing report on SAP Payroll error log I suggest taking a look at below blog. There is a new functionality from SAP to improve payroll data validation and they are calling it "Control Center Add-On".
This is going to be a free add on for anyone who is on EHP7 and NetWeaver on 7.4 release. The general availability is June 2nd 2014.
Improve payroll data validation with SAP Payroll control center add-on
Hope this helps.
Thanks,
Hemanth Jamithi. -
How to catch SAP application errors in BPM.
Hi,
I have a IDOC to Soap Sync Scenario where I send the message to a Webservice. I have used a BPM since we need to catch the resposne of this message and map it to a RFC. For ex if I get a success resposne I need to map success if not than I need to catch the error and map it to the RFC. Now here in some cases like if the target system (webservice) is down than XI raises a sap application error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Inbound Message
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Connection refused (errno:239)</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Normally XI stops the process in these cases and does not proceed to the next step but I need to catch this message and map the content in the AdditionalText to the target RFC. Can anyone let me know how to catch this SAP Application Error in BPM and map it to the RFC.
Thanks,
BhargavHi Gaurav,
As I have mentioned I need to catch the application error in the BPM. If you see the discussion that is mentioned after the blog you have mentioned it is stated that the fault messages or the application error cannot be caught in BPM.
In the blog that you stated we can catch the fault message and map it to a message structure but only to that extent after that it would stop the BPM process at that step but would not proceed further as shown in the screenshot given in the blog it would fail as "application error restart not possible".
I need to proceed further and capture this error to an RFC Structure and call a proxy.
Here after the error it does not proceed to the next step.
Thanks,
Bhargav -
Error while printing (SAP spool error)
Hi,
I have configured a printer of type 'C : Direct Operating System Call'. On printing a page, an error occurs with the following log entries
SAP spool error log
=====================
Print request processing log
The host spool is reporting errors
Windows/NT error 1775: "A null context handle was passed from the client to the host during a remote procedure call."
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
Please. can someone help me out here.
Thanks!
Regards,
AngadOk I am upgrading from R/3 46C to ECC 6.0, on the 46c system the printers are configured as follow:
Device type HPLJ4 : HP Laserjet 4 series
Spool server sapprod1_PRD_00 sapprod1
Device class Standard printer
Host spool access method C: Direct operating system call
Host printer
srtroot03.startek.com\srt-dc-c4-sharp
Host name sapprod1
On the ECC 6.0 system the printers are configured as follows:
Device Type HPLJ4 : HP Laserjet 4 series
Spool Server srtsapeccdev1_DEV_00
Server Description
Host srtsapeccdev1
Device Class Standard printer
Host Spool Access Method C: Direct operating system call
Host printer
srtroot03.startek.co\srt-dc-c4-sharp
HostName srtsapeccdev1
The 46c system prints just fine, on the ECC 6.0 systems; I can not get the printers to work. I have made sure that the hosts file on the ECC server has the printer host address, and I get the following error back:
SAP spool error log
=====================
Print request processing log
The host spool is reporting errors
Windows/NT error 5 [
srtroot03.startek.com\srt-dc-c4-sharp]: "Access is denied."
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
The access to the Printer Host is wide open, what do I need to do to resolve this issue. -
Sap-plugin error when deploying a par file
Hi,
We are getting sap-plugin error when ever we are trying to deploy the application to the portal.Even after restarting the server the problem is not getting solved.
The application we are trying to deploy is perfectly alright as we tested the same earlier.
Can any one provide some inputs to solve this issue.
To add some more points
In brief ,we are not able to deploy our Portal applications . It is giving us error like this
NFO: Detected Portal Archive File: com.abc.par
INFO: Deployment failed - exception caught: Application upload failed: com.abc.par - more detail at: /usr/sap/POD/JC30/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/deployment/pcd/com.abc.par.log
We got this error many times , but after some time , when we restart the portal it works,
this time it is not working even after I restarted the server many timeshi all, i have same problem with upload of .par file, it doesn't work both from the portal and from the NWDS,
here i post first part of log file:
this is sap-plugin.log :
[16.05.07 / 13:05] #ERROR LEVEL# com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1 > Upload Response: <?xml version="1.0" encoding="utf-8"?>
<query-result><info><type>1</type><message>Detected Portal Archive File: test.par</message></info><info><type>1</type><message>Deployment failed - exception caught: Application upload failed: test.par - more detail at: C:\usr\sap\SWB\DVEBMGS02\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd\test.par.log</message></info></query-result>
this is test.par.log :
2007-05-16_12-03-10
Application upload failed: test.par
com.sapportals.portal.prt.runtime.PortalException: [ApplicationRepositoryService.putArchive] archive: test.par
at com.sapportals.portal.application.applicationrepository.ApplicationRepositoryService.putArchive(ApplicationRepositoryService.java:328)
at com.sapportals.portal.prt.deployment.DeploymentManager._uploadArchive(DeploymentManager.java:813)
at com.sapportals.portal.prt.deployment.DeploymentManager.uploadArchive(DeploymentManager.java:474)
at com.sapportals.portal.prt.deployment.DeploymentManager.uploadApplication(DeploymentManager.java:319)
at com.sap.ip.portal.admin.portalanywhere.ArchiveUploader.doUpload(ArchiveUploader.java:116)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleRequestEvent(AbstractPortalComponent.java:700)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:412)
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:369)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:707)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:232)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sapportals.portal.pcd.pl.PlRuntimeException: unexpected SQLException
Cannot assign a zero-length byte array to host variable 18.
at com.sapportals.portal.pcd.pl.PlFactory.handleUnexpectedSQLError(PlFactory.java:2490)
at com.sapportals.portal.pcd.pl.PlContext.createSubcontext(PlContext.java:652)
at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChildOnPersistence(XfsContext.java:1360)
at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChildAndNotify(XfsContext.java:1118)
at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChild(XfsContext.java:1076)
at com.sapportals.portal.pcd.gl.xfs.XfsContext.createSubcontext(XfsContext.java:846)
at com.sapportals.portal.pcd.gl.xfs.BasicContext.createBasicSubcontext(BasicContext.java:185)
at com.sapportals.portal.pcd.gl.PcdPersContext.createSubcontext(PcdPersContext.java:188)
at com.sapportals.portal.pcd.gl.PcdFilterContext.filterCreateSubcontext(PcdFilterContext.java:244)
at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:133)
at com.sapportals.portal.pcd.gl.PcdGlContext.createSubcontext(PcdGlContext.java:500)
at com.sapportals.portal.pcd.gl.PcdGlContext.bind(PcdGlContext.java:425)
at com.sapportals.portal.pcd.gl.PcdProxyContext.bind(PcdProxyContext.java:426)
at com.sapportals.portal.pcd.gl.PcdProxyContext.rebindInt(PcdProxyContext.java:446)
at com.sapportals.portal.pcd.gl.PcdProxyContext.rebind(PcdProxyContext.java:460)
at com.sapportals.portal.pcd.gl.PcdGlContext.rebind(PcdGlContext.java:1317)
at com.sapportals.portal.pcd.gl.PcdProxyContext.rebind(PcdProxyContext.java:501)
at com.sapportals.portal.pcd.gl.PcdProxyContext.rebind(PcdProxyContext.java:663)
at com.sapportals.portal.pcd.gl.PcdProxyContext.rebind(PcdProxyContext.java:668)
at com.sapportals.portal.application.applicationrepository.ApplicationRepositoryService.updateObject(ApplicationRepositoryService.java:717)
at com.sapportals.portal.application.applicationrepository.ApplicationRepositoryService.storeApplication(ApplicationRepositoryService.java:389)
at com.sapportals.portal.application.applicationrepository.ApplicationRepositoryService.putArchive(ApplicationRepositoryService.java:306)
... 34 more
Caused by: com.sap.sql.log.OpenSQLException: Cannot assign a zero-length byte array to host variable 18.
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
at com.sap.sql.jdbc.common.dispatch.BlobHostVariable.setBinaryStream(BlobHostVariable.java:143)
at com.sap.sql.jdbc.common.CommonPreparedStatement.setBinaryStream(CommonPreparedStatement.java:776)
at com.sap.engine.services.dbpool.wrappers.PreparedStatementWrapper.setBinaryStream(PreparedStatementWrapper.java:401)
at com.sapportals.portal.pcd.pl.AttributeHeadersTable.storeAttribute(AttributeHeadersTable.java:431)
at com.sapportals.portal.pcd.pl.AttributeHeadersTable.insert(AttributeHeadersTable.java:248)
at com.sapportals.portal.pcd.pl.PlObject.save(PlObject.java:541)
at com.sapportals.portal.pcd.pl.PlContext.createSubcontext(PlContext.java:616)
at com.sapportals.portal.pcd.pl.PlContext.createSubcontext(PlContext.java:640)
... 54 more -
SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string. 'Received Alerts' (OAIB)
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM ODPO AS T0 LEFT OUTER JOIN
VPM2 AS T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry LEFT OUTER JOIN
OVPM AS T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
VPM1 AS T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate>='[%0]' and T0.DocDate<='[%1]'Hi,
Try this:
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM ODPO T0 LEFT OUTER JOIN
VPM2 T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry
LEFT OUTER JOIN
OVPM T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
VPM1 T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate >= '[%0]' and T0.DocDate <='[%1]'
group by T0.DocStatus,T0.DocDate ,
T0.DocNum ,
T0.NumAtCard,
T0.TransId ,
T0.Comments ,
T0.CardCode,
T0.CardName ,
T0.WTSum ,
T3.DueDate ,
T3.CheckSum
Thanks & Regards,
Nagarajan -
SAP XI error: 401 Unauthorized (When calling from Enterprise Portal)
Hello Friends
I am trying to access an SAP table from IVIEW of portal via XI. Using the latest and greatest version of all SAP Components. (We just installed couple of weeks back).
I keep getting the following error message when I try to access data from IVIEW of portal.
"SAP XI error: 401 Unauthorized"
What may be the reason? If some one can help me, I would really appreciate it.
Thanks
RamThanks Srinivas for your help.
I tried accessing the URL directly and got the error message
"User Credentials not passed via Enterprise Portal. Please contact your Administrator"
Any more suggestions?
Thanks again
Ram -
Hi All,
I got the following error while installing TMKSVR, can anyone please help me out in this.
"An error occured during installation (instmksvr: an error occurred while extracting the savefile on the iseries host (details" "550-Error occurred on command RSTOBJ OBJ(CRTTMKSVR) SAVLIB(TMKSVR) DEV(SAVF) OBJTYPE(ALL) SAVF(TMK.").)
Regards,
Preethi
Edited by: Preethi S Kotian on Nov 12, 2010 8:22 AMHi Mates,
This reply is on behalf of Preethi.
The actual scenario is we are trying to install SMD agent on iSeries Host. We have all the software, kernel in WTS (Windows terminal host). So, to install SMD agent, we need to have connection between iSeries host and WTS (please correct me if Iu2019m wrong). For maintaining the same, we are trying to install TMKSVR. While installing the same, we are seeing the below error message.
starting installation...
checking for installation files...
checking/creating temporary directory...
copying installation files to temporary directory...
SAPCAR.EXE -> C:\DOCUME1\SIPATE1\LOCALS~1\Temp\7\SAPCAR.EXE
TMKSVR.SAR -> C:\DOCUME1\SIPATE1\LOCALS~1\Temp\7\TMKSVR.SAR
old installation found, removing...
unpacking TMKSVR.SAR...
SAPCAR: processing archive TMKSVR.SAR (version 2.01)
x TMKSVR.SAVF
SAPCAR: 1 file(s) extracted
transferring TMKSVR.SAR to server...
extracting savefile...
Please help us on the same.
Regards,
Hari -
SAP ECC error:'Migration Monitor' exits with error code 103.
Hi All,
I am doing SAP ECC installation for windows 32 bit with MAXDB as backend.
I am stuck at the import ABAP.Getting error
ERROR 2008-08-08 16:10:53
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
1) imort_monitor.java.log-->contains
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 0, completed 18, failed 0, total 19.
Loading of 'SAPVIEW' import package: ERROR
Import Monitor jobs: running 0, waiting 0, completed 18, failed 1, total 19.
2)import_monitor.log
ERROR: 2008-08-08 16:10:36 com.sap.inst.migmon.LoadTask run
Loading of 'SAPVIEW' import package is interrupted with R3load error.
Process 'D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -nolog -c 0' exited with return code 2.
For mode details see 'SAPVIEW.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
INFO: 2008-08-08 16:10:52
All import packages are processed.
WARNING: 2008-08-08 16:10:52
1 error(s) during processing of packages.
INFO: 2008-08-08 16:10:52
Import Monitor is stopped.
3)SAPVIEW.log
error message returned by DbSl:
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE VIEW "Z_T_CO_BW" ( "KOKRS" , "KOSTL" , "VERSN" , "KSTAR" , "WOG001" , "MEG001" ) AS SELECT T0002."KOKRS", T0002."KOSTL", T0001."VERSN", T0001."KSTAR", T0001."WOG001", T0001."MEG001" FROM "COSS" T0001, "CSKS" T0002 WHERE T0002."MANDT" = T0001."MANDT")
DbSlExecute: rc = 103
(SQL error -942)
error message returned by DbSl:
(DB) INFO: disconnected from DB
D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: job finished with 3108 error(s)
D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080808174211
Only SAPDB: SAPSID srvice of SAP DB is only up.
No other services of database are up.And i am not able to up the other services also.
Is it required to up the other services?
If not?
Why this error is occuring?
Any help will be appreciated.
Thanks&Regards
Manisha dasHello Manisha,
The one of the possible reasons for this is due to lack of H/W.
Increase your RAM size to atleast 2GB and utilise the same while you are installing ECC in database parameters step..
If the issue is with H/W, then this should fix the issue.
Hope it helps,
Regards,
Satish. -
SAP HANA: Error while activating Graphical Calculation Views
Hello,
I am receiving the below error while activating a Graphical Calculation View.
I am getting this error lately. Not sure what is causing this because the calculation views worked just fine before.
It is failing at the Repository Activation step with the Activation ID 2146.
It says - Repository: Revalidation failed for at least one object.
MDXRuntime: Internal deployment of object failed: Internal Error:Create Scenario: failed aCalcEngine.createScenario(): The following errors occured: Could not create repository entry for scenario (34053)nnprinting XML <?xml version="1.0" encoding="UTF-8" standalone="no"?><cubeSchema defaultLanguage="EN" defaultSchema="_SYS_BIC" operation="createCalculationScenario" version="3"><calculationScenario name="sflight/GC_AGENCY_REVENUE" schema="_SYS_BIC"><dataSources><tableDataSource name="SBOOK" schema="SFLIGHT" table="SBOOK"><attributes><allAttribute /></attributes></tableDataSource><tableDataSource name="STRAVELAG" schema="SFLIGHT" table="STRAVELAG"><attributes><allAttribute /></attributes></tableDataSource></dataSources><calculationViews><join name="Join_1" type="inner"><viewAttributes><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="MANDT" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="AGENCYNUM" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="FORCURAM" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="LOCCURAM" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="NAME" /></viewAttributes><inputs><input name="SBOOK"><mapping source="MANDT" target="MANDT"/><mapping source="AGENCYNUM" target="AGENCYNUM"/><mapping source="FORCURAM" target="FORCURAM"/><mapping source="LOCCURAM" target="LOCCURAM"/></input><input name="STRAVELAG"><mapping source="MANDT" target="MANDT"/><mapping source="AGENCYNUM" target="AGENCYNUM"/><mapping source="NAME" target="NAME"/></input></inputs><joinAttributes><joinAttribute excludeFlag="false" name="MANDT" /><joinAttribute excludeFlag="false" name="AGENCYNUM" /></joinAttributes></join><aggregation name="finalAggregation" defaultViewFlag="true"><inputs><input name="Join_1"><mapping source="NAME" target="NAME"/><mapping source="AGENCYNUM" target="AGENCYNUM"/><mapping source="MANDT" target="MANDT"/><mapping source="LOCCURAM" target="LOCCURAM"/><mapping source="FORCURAM" target="FORCURAM"/></input></inputs><viewAttributes><viewAttribute name="NAME"/><viewAttribute name="AGENCYNUM"/><viewAttribute name="MANDT"/></viewAttributes><keyfigures><keyfigure name="LOCCURAM" aggregationType="sum"/><keyfigure name="FORCURAM" aggregationType="sum"/><keyfigure name="row.count" datatype="int" isVisible="false" aggregationType="count"/></keyfigures><calculationNodeHints countStarAttribute="row.count"/></aggregation></calculationViews></calculationScenario></cubeSchema>nVersion: 33n
I am using the SFLIGHT schema which is provided by SAP.
Any pointer is appreciated.Hi Murali
I met the exactly same issue when I try to activate a graphical calculation views.
I created a new user in HANA db, then create a simple graphical calculation view(just from one table from this user). It doesn't work. All attribute views work fine. There's no related column view under _sys_bic.
HANA database version is 1.00.31 runs on HP DL580 512GB. And here's the error message -
"MDXRuntime: Internal deployment of object failed: Internal Error:Create Scenario: failed aCalcEngine.createScenario(): The following errors occured: Could not create repository entry for scenario (34053)nnprinting XML <?xml version="1.0" encoding="UTF-8" standalone="no"?><cubeSchema defaultLanguage="EN" defaultSchema="_SYS_BIC" operation="createCalculationScenario" version="3"><calculationScenario name="co-pc-river/CALC_TEST1" schema="_SYS_BIC"><dataSources><tableDataSource name="JEST" schema="GLR" table="JEST"><attributes><allAttribute /></attributes></tableDataSource></dataSources><calculationViews><projection name="finalProjection" defaultViewFlag="true"><inputs><input name="JEST"><mapping source="MANDT" target="MANDT"/><mapping source="OBJNR" target="OBJNR"/><mapping source="STAT" target="STAT"/><mapping source="INACT" target="INACT"/></input></inputs><viewAttributes><viewAttribute name="MANDT"/><viewAttribute name="OBJNR"/><viewAttribute name="STAT"/><viewAttribute name="INACT"/></viewAttributes></projection></calculationViews></calculationScenario></cubeSchema>nVersion: 64n"
Best Regards
Mao Mingqi -
SAP router error on windows server 2008 64bit
Hi All,
I am installing sap router on windows 2008 server 64 bit.
While trying to generate certificate request it showing below error.
E:\usr\sap\saprouter\nt-x86_64>sapgenpse get_pse -v -r certreq -p local.pse "CN=
solman, OU=000XXXXXXX, OU=SAProuter, O=SAP, C=DE"
Got absolute PSE path "C:\Users\soladm\sec\local.pse".
Please enter PIN:
Please reenter PIN:
Supplied distinguished name: "CN=solman, OU=000XXXXXXX, OU=SAProuter, O=SAP, C=
DE"
Creating PSE with format v2 (default)
get_pse: Can't create PSE.
ERROR in af_create: (4352/0x1100) could not flush : "SW-PSE"
ERROR in create_PSE: (4352/0x1100) could not flush : "SW-PSE"
ERROR in modified_PSEFile: (4352/0x1100) could not flush : "SW-PSE"
ERROR in flush_PSEFile: (1283/0x0503) Can't write file : "C:\Users\soladm\sec\lo
cal.pse"
ERROR in aux_OctetString2file: (1283/0x0503) Can't write file : "C:\Users\soladm
\sec\local.pse"
I couldn't find the cryptography software specifically for windows 2008 server 64 bit ? So I downloaded the software for windows server 64 bit platform.
Do any one have idea on this...
Please reply..
Regards
VinayHi,
Yes, there is no specific cryptography software for windows server 2008 and whatever u have chosen is correct.
Fom the following error message I could see where the issue arises.
Can't write file : "C:\Users\soladm\sec\local.pse"
I think you have not set the following ENV variable for the SAPRouter admin user (in your case soladm) and hence the sapgenpse tries to import the certificate in the SOLADM user's document folder.
Set the following variables for the user SOLADM and then try to import the certificate as mentioned in the [link|http://service.sap.com/saprouter-sncdoc].
SECUDIR = E:\usr\sap\saprouter
SNC_LIB = E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll
Hope this resolves ur issue.
Regards,
Varadharajan M -
SAP GRC10 - Error while submitting Access Request
Hello All,
<<Removed>>
While submitting the request ...getting below mentioned error on the page
Error while processing your query
What has happened?
The URL call http://<<removed>>/sap/bc/webdynpro/SAP/GRAC_GAF_ACC_REQ_WITH_REQ_REF was terminated because of an error.
Note
The following error text was processed in system GD1 : Conversion of type h to type N not supported.
The error occurred on the application server blrkec220748d_GD1_00 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_DUE_DATE of program CL_GRAC_ACCESS_REQUEST_UTIL===CP
Method: GET_DUE_DATE of program CL_GRAC_MODEL_ACCESS_REQUEST==CP
Method: IF_GRFN_API_MODEL~SAVE of program CL_GRAC_MODEL_ACCESS_REQUEST==CP
Method: SAVE of program CL_GRFN_API_SESSION===========CP
Method: CREATE of program /1BCWDY/Z3TZZFT9CG8486P2AANU==CP
Method: IF_COMPONENTCONTROLLER~CREATE of program /1BCWDY/Z3TZZFT9CG8486P2AANU==CP
Method: PROCESS_EVENT of program /1BCWDY/Z3TZZFT9CG8486P2AANU==CP
Method: IWCI_IF_FPM_UI_BUILDING_BLOCK~PROCESS_EVENT of program /1BCWDY/Z3TZZFT9CG8486P2AANU==CP
Method: CALL_UIBB_PROCESS_EVENT of program CL_FPM========================CP
Method: PROCESS_EVENT of program CL_FPM========================CP
What can I do?
If the termination type is RABAX_STATE, you will find more information on the cause of termination in system GD1 in transaction ST22.
If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server blrkec220748d_GD1_00 in transaction SM21.
If the termination type is ERROR_MESSAGE_STATE, you cansearch for further information in the trace file for the work process 1 in transaction ST11 on the application server. <<Removed>>
. You may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system adminmistrator.
Error Code: ICF-IE-http -c: 400 -u: 163554 -l: E -s: GD1 -i: blrkec220748d_GD1_00 -w: 1 -d: 20111005 -t: 195025 -v: RABAX_STATE -e: OBJECTS_MOVE_NOT_SUPPORTED -X: 1078D28404571EE0BBEBA3BBD9492C36_1078D28404571EE0BBEBA40E1A426C36_1 -x: 1D5DEFE0CADEF14FAC361078D2840457
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
============================================================
Please find below error Log from SLG1
Config Error,Function Module is not maintained for Plug-in
Thanks,
Jagat
Edited by: Matt on Jan 25, 2012 3:24 PMHello Aman,
Please find Below Dump Details downloaded from ST22
Category ABAP Programming Error
Runtime Errors OBJECTS_MOVE_NOT_SUPPORTED
ABAP Program CL_GRAC_ACCESS_REQUEST_UTIL===CP
Application Component GRC-AC
Date and Time 07.10.2011 10:47:56
Short text
Conversion of type "h" to type "N" not supported.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_GRAC_ACCESS_REQUEST_UTIL===CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
You attempted to move one data object to another.
This is not possible here because the conversion of a data object
of type "h" to type "N" is not supported.
Trigger Location of Runtime Error
Program CL_GRAC_ACCESS_REQUEST_UTIL===CP
Include CL_GRAC_ACCESS_REQUEST_UTIL===CM018
Row 59
Module type (METHOD)
Module Name GET_DUE_DATE
Source Code Extract
Line SourceCde
29
30 *-get function id from application & process id
31 CALL METHOD cl_grac_access_request_util=>get_appl_mapping_data
32 EXPORTING
33 iv_application_id = lv_application_id
34 iv_process_type = iv_process_id
35 IMPORTING
36 et_application_data = lt_application_data.
37
38 *only 1 record would exist in appl data table for appl id & process id
39 READ TABLE lt_application_data INTO ls_application_data
40 INDEX 1.
41 lv_fdt_uuid = ls_application_data-functionid.
42 *--
43 IF it_brftab IS NOT INITIAL
44 AND lv_fdt_uuid IS NOT INITIAL.
45
46 *-execute brf+ rule
47 TRY.
48 CALL METHOD cl_grfn_ac_brfp=>execute_brf_rule
49 EXPORTING
50 iv_func_uuid = lv_fdt_uuid
51 it_data = it_brftab
52 IMPORTING
53 et_data = lr_result.
54 CATCH cx_grfn_exception .
55 ENDTRY.
56
57 IF lr_result IS BOUND.
58 ASSIGN lr_result->* TO <lr_result>.
>>>>> lv_sla_id = <lr_result>.
60 ENDIF.
61
62 READ TABLE lt_sla INTO ls_sla
63 WITH KEY sla_id = lv_sla_id.
64 IF sy-subrc EQ 0.
65 ev_sla_id = ls_sla-sla_id. "sla id
66
67 *calculate due date
68 CALL FUNCTION 'END_TIME_DETERMINE'
69 EXPORTING
70 duration = ls_sla-sla_days
71 unit = '10'
72 IMPORTING
73 end_date = ev_due_date " due date
74 CHANGING
75 start_date = sy-datum
76 start_time = sy-uzeit
77 EXCEPTIONS
78 factory_calendar_not_found = 1
Active Calls/Events
No. Ty. Program Include Line
Name
26 METHOD CL_GRAC_ACCESS_REQUEST_UTIL===CP CL_GRAC_ACCESS_REQUEST_UTIL===CM018 59
CL_GRAC_ACCESS_REQUEST_UTIL=>GET_DUE_DATE
25 METHOD CL_GRAC_MODEL_ACCESS_REQUEST==CP CL_GRAC_MODEL_ACCESS_REQUEST==CM00Y 47
CL_GRAC_MODEL_ACCESS_REQUEST=>GET_DUE_DATE
24 METHOD CL_GRAC_MODEL_ACCESS_REQUEST==CP CL_GRAC_MODEL_ACCESS_REQUEST==CM004 420
CL_GRAC_MODEL_ACCESS_REQUEST=>IF_GRFN_API_MODEL~SAVE
23 METHOD CL_GRFN_API_SESSION===========CP CL_GRFN_API_SESSION===========CM004 11
CL_GRFN_API_SESSION=>SAVE
22 METHOD /1BCWDY/Z3TZZFT9CG8486P2AANU==CP /1BCWDY/B_Z3TZZFT9CG8486P2AAU5 3404
CL_COMPONENTCONTROLLER_CTR=>CREATE
Web Dynpro Component GRAC_UIBB_ACCESS_REQUEST
Controller COMPONENTCONTROLa
21 METHOD /1BCWDY/Z3TZZFT9CG8486P2AANU==CP /1BCWDY/B_Z3TZZFT9CG8486P2AAU5 159
CLF_COMPONENTCONTROLLER_CTR=>IF_COMPONENTCONTROLLER~CREATE
Web Dynpro Component GRAC_UIBB_ACCESS_REQUEST
Controller COMPONENTCONTROLLER
20 METHOD /1BCWDY/Z3TZZFT9CG8486P2AANU==CP /1BCWDY/B_Z3TZZFT9CG8486P2AAU5 7374
CL_COMPONENTCONTROLLER_CTR=>PROCESS_EVENT
Web Dynpro Component GRAC_UIBB_ACCESS_REQUEST
Controller COMPONENTCONTROLLER
19 METHOD /1BCWDY/Z3TZZFT9CG8486P2AANU==CP /1BCWDY/B_Z3TZZFT9CG8486P2AAU5 534
CLF_COMPONENTCONTROLLER_CTR=>IWCI_IF_FPM_UI_BUILDING_BLOCK~PROCESS_EVENT
Web Dynpro Component GRAC_UIBB_ACCESS_REQUEST
Controller COMPONENTCONTROLLER
18 METHOD CL_FPM========================CP CL_FPM========================CM00G 46
CL_FPM=>CALL_UIBB_PROCESS_EVENT
17 METHOD CL_FPM========================CP CL_FPM========================CM005 46
CL_FPM=>PROCESS_EVENT
16 METHOD CL_FPM========================CP CL_FPM========================CM00C 34
CL_FPM=>RUN_EVENT_LOOP
15 METHOD CL_FPM========================CP CL_FPM========================CM00O 8
CL_FPM=>RAISE_EVENTS
14 METHOD /1BCWDY/Z3TZZFT9CG847SKLEJYU==CP /1BCWDY/B_Z3TZZFT9CG847SKLEK56 2997
CL_CNR_VIEW_CTR=>ONACTIONBUTTON_PRESSED
Web Dynpro Component FPM_GAF_COMPONENT
Controller CNR_VIEW
13 METHOD /1BCWDY/Z3TZZFT9CG847SKLEJYU==CP /1BCWDY/B_Z3TZZFT9CG847SKLEK56 382
CLF_CNR_VIEW_CTR=>IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER
Web Dynpro Component FPM_GAF_COMPONENT
Controller CNR_VIEW
12 METHOD CL_WDR_DELEGATING_VIEW========CP CL_WDR_DELEGATING_VIEW========CM006 6
CL_WDR_DELEGATING_VIEW=>INVOKE_EVENTHANDLER
11 METHOD CL_WDR_ACTION=================CP CL_WDR_ACTION=================CM00A 38
CL_WDR_ACTION=>IF_WDR_ACTION~FIRE
10 METHOD CL_WDR_WINDOW_PHASE_MODEL=====CP CL_WDR_WINDOW_PHASE_MODEL=====CM00U 95
CL_WDR_WINDOW_PHASE_MODEL=>DO_HANDLE_ACTION_EVENTS
9 METHOD CL_WDR_WINDOW_PHASE_MODEL=====CP CL_WDR_WINDOW_PHASE_MODEL=====CM002 82
CL_WDR_WINDOW_PHASE_MODEL=>PROCESS_REQUEST
8 METHOD CL_WDR_WINDOW=================CP CL_WDR_WINDOW=================CM00V 12
CL_WDR_WINDOW=>PROCESS_REQUEST
7 METHOD CL_WDR_MAIN_TASK==============CP CL_WDR_MAIN_TASK==============CM00I 76
CL_WDR_MAIN_TASK=>EXECUTE
6 METHOD CL_WDR_MAIN_TASK==============CP CL_WDR_MAIN_TASK==============CM00U 6
CL_WDR_MAIN_TASK=>IF_WDR_RUNTIME~EXECUTE
5 METHOD CL_WDR_CLIENT_ABSTRACT_HTTP===CP CL_WDR_CLIENT_ABSTRACT_HTTP===CM01C 100
CL_WDR_CLIENT_ABSTRACT_HTTP=>HANDLE_REQUEST
4 METHOD CL_WDR_MAIN_TASK==============CP CL_WDR_MAIN_TASK==============CM00J 95
CL_WDR_MAIN_TASK=>IF_HTTP_EXTENSION~HANDLE_REQUEST
3 METHOD CL_HTTP_SERVER================CP CL_HTTP_SERVER================CM01B 388
CL_HTTP_SERVER=>EXECUTE_REQUEST_FROM_MEMORY
2 FUNCTION SAPLHTTP_RUNTIME LHTTP_RUNTIMEU02 1155
HTTP_DISPATCH_REQUEST
1 MODULE (PBO) SAPMHTTP SAPMHTTP 13
%_HTTP_START
Thanks,
Jagat -
OpenPS MS project file- SAP PS - error while uploading
Hello guys,
I can't move the project (any project) data from MS Project to SAP PS. Why is that ? Is there any restriction for data to be changed in MS Project ? I modified only description of one WBS element.
I feel like I have to program additionally something somewhere..
here please check the action log:
Action Log for Open PS for MSP -2008.12.22, 09:57:11
- importing WBS elements from R/3 PS of project TESTAS-2008-12-22
The WBS.Getinfo BAPI was called.
- duration in sec.:0,4101563
- return code:
The project has following objects:
- WBS TESTAS-2008-12-221
- WBS TESTAS-2008-12-2211
- Network 000004000100 - Activity 0010
- Network 000004000100 - Activity 0020
- WBS TESTAS-2008-12-22111
- WBS TESTAS-2008-12-221111
- WBS TESTAS-2008-12-2211111
The Network.Getinfo BAPI was called.
- duration in sec.:4,296875E-02
- return code:
Deleting the unreferenced activities.
PS project data imported - end of BAPI call.
- creating R/3 PS project from current MSP project - TESTAS-2008-12-22
- clearing parameters ...
Parameters for import into PS cleared
Creating project definition...
- WBS element: TESTAS-2008-12-2211 - network: 000004000100
Creating PS hierarchy from MSP hierarchy
- create WBS element: TESTAS-2008-12-221
Creating relationships...
- create WBS element: TESTAS-2008-12-2211
Creating relationships...
- creating activity: 000004000100 0010
0 -- DAY
0 -- H
Creating relationships...
- creating activity: 000004000100 0020
0 -- DAY
0 -- H
Creating relationships...
- create WBS element: TESTAS-2008-12-22111
Creating relationships...
- create WBS element: TESTAS-2008-12-221111
Creating relationships...
- create WBS element: TESTAS-2008-12-2211111
Creating relationships...
PS import parameters created
- BAPI input parameter created succesfully
Projects are being compared...
- comparing project definitions
- Update project definition.TESTAS-2008-
- comparing WBS elements
- update WBS element: TESTAS-2008-12-221
- update WBS element: TESTAS-2008-12-2211
- update WBS element: TESTAS-2008-12-22111
- update WBS element: TESTAS-2008-12-221111
- update WBS element: TESTAS-2008-12-2211111
- comparing WBS hierarchy
- comparing networks
- update network: 000004000100
- comparing activities
- update activity: 000004000100 0010
- update activity: 000004000100 0020
- comparing relationships
- comparing activity elements
- comparing WBS milestones
- comparing activity milestones
IMethodProject:
- 000001 Update ProjectDefinition TESTAS-2008-
- 000001 Update WBS-Element TESTAS-2008-12-221
- 000002 Update WBS-Element TESTAS-2008-12-2211
- 000003 Update WBS-Element TESTAS-2008-12-22111
- 000004 Update WBS-Element TESTAS-2008-12-221111
- 000005 Update WBS-Element TESTAS-2008-12-2211111
- 000001 Update Network 000004000100
- 000001 Update NetworkActivity 000004000100 0010
- 000002 Update NetworkActivity 000004000100 0020
The WBS.Maintain BAPI was called.
- duration in sec.:5,859375E-02
- return code: E
- A B1547
No currency key found for ISO code 0 in field BAPI_NETWORK_ACTIVITY-USER
- A B1547
FIELDCUKY1_ISO
ERROR test import into PS system failed
ERROR updating PS project
Edited by: Laimonas Bindokaitis on Dec 22, 2008 10:07 AMPlease go though this doucument made by PS expert Srinivas sir,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5037d0e8-8bc2-2a10-6fb3-c4833289bb66
It will help you.
Regards
Nitin -
SAP PI Error: No standard agreement found
Hi SAP experts,
Hope you can give advise on what is missing/error in my SAP PI configurations, why I am encountering this specific error,
<SAP:AdditionalText>No standard agreement found for , SAPR/3, P_GDDXI, S_HTTP, urn:sap-com:document:sap:idoc:messages, IDOC Type </SAP:AdditionalText>
<SAP:Stack>Problem occurred in receiver agreement for sender -SAPR/3 to receiver P_GDDXI-S_HTTP,urn:sap-com:document:sap:idoc:messages.IDOC Type: No standard agreement found for , SAPR/3, P_GDDXI, S_HTTP, urn:sap-com:document:sap:idoc:messages, IDOC Type</SAP:Stack>
I've configured already the receiver agreement but it seems there is still an error.
Thanks in advance!
GodofredoYou might be using a wrong XML structure for which there is no Integration Directory objects exist especially Receiver Determination.
Make sure your sender agreement is right and hooked up to a correct communication channel.
Try testing this first in the Integration Directory Test tool before sending an actual message?
If you are still having issues then please provide the message flow ex. IDoc to File, Idoc to HTTP etc. -
CR 2008 on SAP BW : Error on file filename : Database Connector Error
Hi,
We are facing a rather strange problem in our Prod box.
When we run a CR with a mandatory parameter from EP or Infoview,
For the first available LOV on Plant, (Plant is the Mandatory Parameter entry for the report)
For the first execution,
the Crystal report fails to execute and throws the following error.
Error on file <filename>: Database Connector Error
When we re-run the report with the same parameters, it executes and displays the result.
We are using Crystal Reports 2008 on SAP BW Query with SAP BW MDX Driver
Since the users currently access this report, we need this get resolved asap.
Any help is greatly appreciated.Hi,
this is a forum so people will answer questions when they get to it.
if you need help "asap" then I would suggest you open a case with SAP Support
Ingo
Maybe you are looking for
-
How can I delete my entire History file, without doing it one site at a time?
I am able to delete a given site in my History file by right-clicking on it and indicating to delete it. How do I erase the entire file when it is no longer of any use to me?
-
AppleTV Media Network Hangs on Video
Network Setup: MacBook Pro - Serving the iTunes library out to devices - WIRED CONNECTION DROBO FS - 4tb used - Contains the iTunes Library - audio and HD video both - WIRED CONNECTION Airport Extreme - Base station serving the wireless network out t
-
Rman backup in oracle 10.2.3
Dear friends, I'm trying to take a full online database backup using rman. I used the below script. run { configure snapshot controlfile name to 'C:\RMAN_BACKUP\EBMS\FULL\c-%d_%t_%s_%p.ora'; allocate channel c1 type disk; BACKUP DATABASE PLUS ARCHIVE
-
My cluster application needs to do some bidirectional mappings via coherence between coherence members and application entities. What we have now are mappings that use Member.getID() integers. When we need to dispatch logic to Members hosting an enti
-
I have just made a test connection to a web service. When I view the form in Acrobat, it works fine.. When I tried to view the form through Reader it does not work. I thought that this was because I needed to reader enable to form (extend features) H