SAP Training software

Hi
Does anyone know where i can obtain SAP Software R3 + CRM so that i can use to train. I beleive that SAP Marketplace has software to download but i am not sure if it costs anything? I think the training software is called IDES?
Has anyone downloaded this software and can provide me with a link and costing then that will be great.
Thanks
Avi

just did a search ... C if these links help !!!
IDES for XI ?
Cost of XI/NetWeaver

Similar Messages

Where can get SAP Trial Software CD for training purpose

Hello all
I have needed SAP Trial Software CD. This is required for implementing and general view about SAP Solution. Where can I get these CD with minimum cost.
Thanks
Saif

Saif,
you should contact SAP directly on this issue.
They will tell you how to get a sample installation.
If you need a contct in your country and cannot find one, just ask here and we will try to get you one.
HTH Lutz Morrien

How to start a SAP training institute?

Hello every one,
Thanks for reading this email. I have a couple of questions. It would be great if you can help me out by answering these.
1. How to start a SAP training institute?
2. What would be the cost of the SAP software ,that one needs to buy for training ?
3. Should we contact SAP to get permisson to conduct SAP training ?
Thanks in advance.
Karan

Hi Chinmay!
I too have the same Query, i see that there has been no response to your query, incase if you have started the institute, may be you can help me!
I need to know the procedure to start an SAP training Institute.
I have set up a Company, now what next? Do i need to Partner with SAP? how do i get access to SAP IDES? How much is it going to cost me?
Once that is in place, who are the people i need like Basis team to set up the landscape. etc...
Awaiting a response from anyone, who can guide me.
Regards,
Ronica.

SAP Training Videos

Hi,
I came across a site selling SAP training videos at www.sapjuice.com .
They are claiming these are brand new videos which are not available
in the market yet.
Has anyone tried these videos so far? If yes then please share your
opinion about these videos to me because i am contemplating to buy
these videos based on good feedbacks.

Please note: that new company is only say: R/3 training video. Unless you post your question to the wrong forum, don't buy it!!
Thanks,
Gordon

From which place i get the sap netweaver software

hi
I want to purchase sap netweaver software. I have p4 computer at my home and what are the configuration of computer to install sap netweaver software.
Can you help me to get sap netweaver software?
Plz give me reliable or helpful information.
I m waiting for ur reply.
Edited by: Rajni Rani on Jul 2, 2008 9:33 AM

hi amit
I don't understand what do you want to say. I have opened that site but i don't know where is the information which is want to know.
Still my question is same.
Edited by: Rajni Rani on Jul 3, 2008 7:00 AM

SAP Training

Goodmorning SAP Experts,
I would really need your expert advice on the following career choice, I am a Business Analyst with 3 years experience on SAP FICO that has been working in Italy and Australia for Accenture, Capgemini and some other SMEs.
I am relocating in Germany where I will live, study German, which would be my fourth language and make some SAP Training.
I hired full time for SAP Training an Indian SAP FICO and ABAP expert which will be giving me very good online 1on1 training for a competitive price, I will take up to 210 hours of individual 1to1 training on SAP FICO, ABAP, CRM. Also this type of training is very flexible, I am not evaluating the enrollment to University as I already hold an MBA and university may not offer this type of specialized and practical training.
The training will be 16 hours every 2 weeks completed in 7/8 months, the rest of the time I will be doing a full time course of German. The training is very flexible and I may consider doing it part time if I decide to go back working.
I am 27 (in Italy we complete master's at 24/5), I never had problems in finding a SAP consultant job in Italy and I was able to work in this field also once I got in Australia. I would like to become in 5/6 years a freelance contractor.
What do you think of this career choice? Will I have a better SAP education if I join some University Diploma or courses?
Thanks
Best Regards
Lorenzo Giovannini

Hi Gaurav
These are authorized training partners of SAP in India where you can do your SD training & certification.
https://training.sap.com/in/en/training-locations/in/agaram-consulting-chennai

Regarding SAP training

*Hii*
*I am looking for a SAP training in a Multiple Modules. I need training on BI/BPC/SD/FICO , is there any organisation giving training and placements, Im looking in INDIA, Malasiya and any other Countries. Please suggest me.*

Hi Harshabw,
I took the TERP10 certification this past summer and learned the basics in many modules. (Including the SD/FI/CO modules you are interested in)
I'm unsure of the training options with the BI/BPC modules.
Here is a link for more information on the TERP10 certification:
http://www.sap.com/services/education/catalog/globaltabbedcourse.epx?context=[[SSO_AIT|TERP10|||062|G|]]|
Hope it helps,
Kevin

SAP TRAINING CDs for FI/CO

Hi folks,
anyone have SAP TRAINING CDs for FI/CO ??
is it best among all the training??
is it worthful to buy these CDs for 4500 USD??
plz advice me.
Thanks
pabitra

Pabitra,
I don't know about the CDs and stuff but would like to tell you a few things.
One should have a strong domain experience to enter into FICO and morever it is always better to learn from a training institute rather than from a CD.
K.Kiran.

Entry in SLD for SAP delivered software component contents

Hi
I have a predelivered software component version ( SWCV ) ESA ECC-SE 602 which I imported into IR ( by setting the *tpz file in the appropriate folder and the imported from IR ) This worked ok. Now I have a custom SWCV - that I created in SLD. Before importing this into IR , I want to create a install time dependency from this custom SWCV pointing to the standard. SWCV.
Question is : Where is the entry in SLD for the SAP standard SWCV - i.e ESA ECC-SE 602 - without this entry - in SLD - how can I point my custom SWCV to ESA ECC-SE 602 ? Or is there any other zip file apart from the *tpz file that is available in marketplace for ESA ECC-SE 602 that I need to import into SLD ? I am stuck at the point of defining the dependency with this question.

Hi
I see that in IR , the SAP std software component has the following name ECC-SE, version 602 . But I do not see a corresponding entry for this in the software catalog in the SLD.
*Question is - should an entry be created automatically in SLD under the software catalog for all SAP delivered contents whenever the tpz file is imported into the IR ? I don't see it created in our case. What is missing ?

SAP Training from Remote (Internet based)

SAP Training from Remote (Internet based)
Instructor Mr. Nanda Kishore
§     IIT engineer with 10 years of SAP specific training experience
§     Trained hundreds of students now well placed in BIG 4 consulting firms
§     Official trainer for companies like Infosys, Triniti, Coconut and Emcure
§     Experienced in ABAP, BW, XI
Upcoming Training session - SAP ABAP
Batch starts August 13, 2007
Highlights
§     Rigorous curriculum
§     Techno functional perspective to ABAP development
§     Real time scenarios
§     Graded assignments
Target Audience
§     Recent graduates seeking to start a career in SAP
§     Programmers looking to transition to a promising career with SAP
§     Functional consultants or Industry process experts looking to enhance their ABAP programming & debugging skills
Testimonials
Great experience being taught by an IITIAN.I think my IQ increased after getting trained by him and I had offer from two companies Accenture and Bearing Point. He prepared me so thoroughly for client interview and life afterwards that not only I got selected in my first interview but till date I could not find a better consultant than myself. I am currently working as a senior consultant in Bearing Point. Arshad
Excellent trainer with great depth of knowledge. His exercises and curriculum are both very challenging. The whole training was a blast and there was an exponential increase in my knowledge all throughout the course. Hemant, EDS employee
I always use to think that I will some day jump to SAP technologies but with two kids I never had the energy and the stamina to change to SAP till I met Kishore. My income jumped up in six months time. Today I am a team lead with a big pharmaceutical company. Mr. Kishore is the one who fully helped me change my career path. Saurav
For more information (fees and connectivity) contact
Email: [email protected]
Tel: 732-529-4188

Hi,
All mentioned options are possible to access SAP Business One, like:
Static IP address for SAP B1 server
Citrix (application or remote desktop)
VPN (you can even setup a simple PPTP, L2TP or OpenVPN). But please be aware that VPN is not recommended by SAP way of connection to ERP systems
There is the fourth nice alternative to avoid VPN and RDP in case you can't use both of them (because of, for instance, local network security settings that blocks you to setup a connection). You can setup HTML Clientless RDP connection at your main server of the remote network (it is even not necessary your SAP B1 server, you should do it on the main machine that has static IP):
Guacamole - HTML5 Clientless Remote Desktop
In this case you will get the RDP connection to your client or server machine with SAP B1 from any kind of network and any kind of device with no additional client setup. It is even work from the mobile phone, but, of course, the screen it too small
Here is how it looks like (in my local browser):
Kind Regards,
Siarhei

What is the actual cost of SAP original Software?

hi experts
<b>What is the actual cost of SAP original Software to implement in one software company.</b>
thanks in advnace

Between $1 and $100,000,000.
Lots of variables... yearly licensing fees or full purchase, R/3 or complete NetWeaver suite, single user or multi-user, several levels of support or no support, implementation partner expenses, types of hardware, etc....
EDIT:
I just noticed you said "one software company". There are other options if you want to be a "partner". It is one thing to use the software to run your company, it is another if you want the software because your company wants to develop add-ons.
Message was edited by: Norman Salter

SAP Cryptographic Software - download ..XI

Hi,
Can you please suggest me from where to download <b>SAP Cryptographic Software</b> to install XI3.0SR1.
My Java : 1.4.2_06
OS: HP-UX
Thanks,
Chimsik

HI
GOOD
GO TO THIS LINK
http://www.easymarketplace.de/Quicklinks.php
http://help.sap.com/saphelp_nw04/helpdata/en/8d/cb71b8046e6e469bf3dd283104e65b/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8d/cb71b8046e6e469bf3dd283104e65b/content.htm
THANKS
MRUTYUN

Can't Access SAP XI software

I have downloaded the SAP NetWeaver Sneak Peek but there is no SAP XI software included and it appears that this software is "(in progress)", does anyone know how I can get access to the SAP XI software?
I'm especially interested in integration builder.

As of now there is no XI sneak preview available yet. Check the following thread about when XI will be available.
Re: XI on a small system
regards
Shravan

SAP EU software component for Web Dynpro SP9

Hi all,
I've followed the tutorial on how to create a Web Dynpro Callable object and couldn't go further because I couldn't find the libraries needed in the Local DC (caf/eu/gp/api/wd) api's.
I've found the Blog from Andre Truong on how to retrieve this API's in your Local Development Component projects (SP7).
/people/andre.truong/blog/2006/06/26/working-with-the-apis-of-caf-guided-procedures-nwdi-or-local-development
Unfortunally this is only working for SP7 (And maybe SP8) but not for SP9.
In the blog Andre mentioned that this problem might be resolved with SP9 because the API's come as default with the IDE.
This appears not to be the case for me.
Does anyone know how to resolve this problem?
PS I also read the following thread and the reply from Tomas Kuba but that seems to be a difficult and dirty way to do it?
Re: Guided procedures & WebDynpro (SAP-EU software component)
Thanks in advance!

Ok, seems to work just fine for SP 9 also.
Only the folders eu and gp don't excists. Just create them and extract the zip files.
Great blog thanks!
Message was edited by:
B. van Prooijen

SAP Training course

All,
I'm currently a Net weaver XI consultant and my company wants me to train on FI. My company is expecting to start in a techno-functional role after getting trained. (more technical than functional)
I was looking at the SAP training curriculum and i'm seeing the TFIN50 and TFIN52 courses? Are these courses a good starting point? Or are they very basic and limited?
Or are there some better choices that will a better in depth training in FI?
Thanks.

What areas in Finance will you cover, Finance, AR, AP, AA, and GL.
Controlling. PCA, CCA, PA, PS.
There are many areas and you need to make sure you understand each one.
I would suggest going to SAP Press and purchasing a book in Finance as they are much cheaper and they explain the key business processes with screen shots for you and basic configuration.
Hope this helps and good luck.

SAP Training software

Similar Messages

Maybe you are looking for