SAP Transaction in EP iView

Hi,
I am trying to create a SAP Transaction iView in EP.
When using SAP GUI for HTML i am getting the error as
<b>Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Application URL ':///webgui/!' is not valid! Please check the protocol and host entries for system</b>
When I try with SAP GUI for Windows, I get "<b>Connection to partner broken</b>" error.
I am also not able to get the desired result with SAP GUI for Java.
Can anyone please throw some light on this?

Hi Suprita,
If i am not mistaken, Integrated ITS will coem with BASIS 6.40.
If you basis version is 6.40 then ITS will be avialable in R/3 system.
Check the Integrated ITS is enable and the necessary settings have been done in transaction SICF, The ITS will come as a service, and also enable all the services in SICF transaction.
Check the Connection test of your Integrated ITS, if it is not available in SICF transaction then you may need to install the ITS seperately. The error you are getting is because, may be the ITS parameters are wrong.
Hope this helps.
Regards
Sumanth
Regards
Sumanth

Similar Messages

Window size of web-enabled SAP transaction in an iView

I have a problem which maybe a bug concerning a web-enabled SAP transaction within a Portal iView. If the transaction is an ABAP report or a Dynpro program that requires a wide display area, the display is cut-off which requires to user to use the scroll bars. However, if manually entering the SAP transaction within the tCode input-field of the web-enabled transaction inside the iView, the window length changes and thereby the scroll bar disappears.
I would like to know how to set the inital width of the web-enabled iView so that there are no scroll bars when the iView opens an SAP transaction which requires a wide display area. I've tried both the Wizards for creating iViews for R/3 and SAP transactions without success.

Hi,
You have to set the iview property to FULL-PAGE and height to be some 8000 in the portal then the problem solves.
Regards,
Lakshmi.

Call SAP Transaction Variant from Iview

Hello,
I know we can pass parameters into a SAP transaction via the 'Application Parameters', but this does not always work especially for complicated selection screen options.
Can the actual transaction variant ID be passed instead?
Regards
Mr.T

Hi,
You may refer this
Passing Variant's value to a transaction iview
Thanks
Prashant

SAP Transaction in iView

Hi. I would like to bring a SAP Transaction into an iView and using SAP GUI for Java. I manage to create an iView based on SAP Transaction iView template delivered with the portal. However, when the iView was launched, it shows:
Error connecting to host x.x.x.x, service 3200 timed out
Component NI(network interface), version 35
rc=-12, module nixxi.c, line 821
Detail NiPConnect
Any ideas? Is there a way to set a longer time out value? oh, and we are currently on EP5.
thanks.

Hi
Why do not you try Win GUI?
I already tried the same thing and it is not working with me when I used Java GUI, but it is working fine when I used Win GUI.

When to create SAP IAC i-view and SAP transaction i-view

Hi Gurus,
Could you please tell me when to create SAP IAC iview and when to create SAP transaction i-view.
Regards
Indranil

Indranil,
check this from one of the threads
Transaction iViews as the name suggests point to SAP transactions. These iViews can be presented in three flavors out of portal - Win,Web and Java GUI. All have their different advantages. One rule of thumb I have been followins is that if the SAP transaction has a lot of user input go with WinGui (talk to users who use these transactions the most and find out what GUI would make them more happy)
WebGui is pretty good in scenarios where the transaction is going to be mostly getting the information a some little interaction. Haven't had a chance to try Java GUI.
Now about IAC or internet application component iviews. These iviews mostly point to services based on ITS i.e. web applications which are served thru ITS. How are they different from SAP transactions served thru webgui is that these have more web like look and feel. A good exampple of this kind of application is Shopping Cart in the Enterprise Buyer Professional. The web like look and feel is given by the service files in ITS.
some questions
1. Is one preferable to the other?
ans: Please read above
2. Is there a corresponding IAC for every SAP Transaction?
ans :No
3. Can either use WebGui or WinGui mode?
ANS: IACs don't have wingui mode.
4. Why do IAC Services need to be "activated"?
ANS: Otherwise they won't be published to ITS and you cannot access them.
Thanks
Bala Duvvuri

Does each SAP transaction iview create a log on to the backend ECC?

Hi,
If I put multiple SAP transaction iviews in a role, each pointing to a different SAP transaction in the same backend system, does the launch of each iview create a new logon in the backend system when using SAP logon tickets? If so, is it possible to make it only launch a new session if one logon has already been created?
Regards
Cindy

Hello Cindy,
launching of diffrent Transactio Iview form same back end is quite similar as loged in to backend with Proper credentials and opening diffrent transaction's by useing
/oxx(Transaction Name)
Hope it will add to ur knowladge.
Regards.
Soni Vinit

Error while Creating SAP Transactional iView

Hi
I am trying to create an SAP Transaction iview to connect with SAP CRM system, i selected property WebHTML
but i coule notable to connect to that TCode iview.
For this i created a System with User Credentials that will map to the back end system.
It is connecting to the backend system using BSP Application which are presented in the Business Packages.
Wheather ITS should be configured to get this feature.
If so provide me the proper steps to configure ITS.
Regards

its path should be
its path : /sap/bc/gui/sap/its/
or you can leave it blank.
if this is the first time you are running ITS application (WEBGUI).
then go to transaction se80->utilities->settings->Internet transaction server->pulish
choose onselected site radio button and choose INTERNAL
click ok to come out of it.
now choose internet service from the dropdown and enter SYSTEM and hit enter.
right click on SYSTEM and click publish
like wise publish WEBGUI and SHUFFLER services.
now go to transaction SICF and go to
sap/bc/gui/sap/its/webgui
right click on webgui and click test, which will open the browser and show its screen, if yes.
then you can now check your iview.
Regards
Raja

3 SAP Transaction iviews on a page-last iview results display in all iviews

Hi Experts....
I need help with a strange situation.
[For your info - We are busy with a SAP Upgrade......
DEV= NW 7.01 SP3
Sandbox = NW 7.01 SP6
DEV and Sandbox reacted the same on this issue.....]
We have created Z0001 and Z0003 parameter transactions in SAP transaction SE93.....Treasury reports.
The "Bypass Selection Screen" option ticked to run the apps without showing the Selection screen.
I have created a Portal 'Overview' page...with the 3 iviews added to the page.
When the overview page executes....every iview is updated with the correct content.....but when the last iview's content was loaded....all 3 iviews has the same header, the same content...same as the last iview.
When running the iviews seperately on a page....no problem.
Do anyone know why this happens.
I really would appreciate your help......for I cannot get any SAP Note related to this problem.
Thank you
Wynand

Hi Senon
Thanks for your reply.....
Does not matter which iview is last....I have re-arranged them...removed them.....mixed them.....still happens.
Even with 2 iviews....the same story.
Have a nice day
Wynand

Field's content is not fully visible in Sap Transaction iview

Hello Friends,
                I have deployed a Sap Transaction iview on my portal. I am facing a issue. When i do F4 help on a field, the content of columns is not fully visible in the opened up popup window.
    Is there any way to adjust the colum width, so that it accomodates the whole content and doesn't truncate it ?
    please help !
Regards,
Vidit

Hi Vidit,
Try to check your Transaction iview directly from the browser / through services not through the EP. If the iview is not working fine then thre is a problem in the code otherwise it has to work
Check your code and try to redeploy
Regards,
sreedhar G

SAP transaction iView not executing the transaction directly

Hello guys,
having a little problem with SAP transaction iView I created - specified system, where the transaction is delpoyed. When I click on the page containing the iView, R/3 logon page comes up instead of the transaction itself being executed. The user and password are the same for the portal and R/3. Do I have to do the mapping then? I so, it would mean I would have to crate mapping for every single portal user. Isn't it possible to make the portal to automatically use the user id/password of the logged-in user?
Thanks a lot for any ideas at all,
Frank

Arun,
I am a bit confused now to be honest. If you mean 'SAP GUI Type' property, at the moment it is set to 'Select' value - it means that no value is selected. I already tried to use 'WinGui' but I couldn't get through to R/3 transaction either.
We are using standalone ITS.
Thanks,
Frank

How to get the Portal Username to SAP Transaction IView ( ABAP cust repor )

Hi Experts,
We have an ABAP program that will be exposed in portal as SAP transaction IVIEW. However the username that is being displayed in the report is the username that is defined in SICF > SAP > BC > GUI > ITS > WEBGUI. I tried to remove the username and password defined, changed the procedure to Alternative Logon Procedure and deleted some logon procedure list retained Basic and SSO Authentication but we are getting DDIC username. We have successfully implemented SSO, and it works in Personal Information of Standard ESS. The following are configure in our portal:
1. We have set SSO ticket
2. We are using User Mapping for portal and ABAP System
3. Retain Basic and SSO authentication
what could be the cause why the program (iview) is still getting the user instead of Portal Username? How can we get the portal username for our abap customized report exposed in iview

Hi,
Make sure that the System you are using to connect to R3 has Log On Method and Authentication Ticket Type properties has SAP LOGON TKT as the value selected.
Path: System Administration --> System Configuration ---> Systems....
Regards,
SrinivaS

Problem in Printing ABAP Report in EP using SAP Transaction IVIEW

Dear All,
A very gud evening,
I am using SAP Transaction Iview to show the ABAP Reports, But I have a Problem...
How to print this report???
Please solve this issue, I have measure requirement of it from client.
Thanks in Advance..

Thanks Haydn,
But my problem is that, there may be no of users will be accessing this report. user will not be having SAP GUI installed in his machine. He will be accessing Transaction IView after login in EP (from any where may be from cyber cafe) and He would like to take printout using any button on the screen.
So suppose any end user having only Internet Explorer installed in his machine, will he be able to take the print out. I think its very genuine requirement.
OR user can not take print out untill SAP GUI is installed in his machine???
Please suggest...
Thanks in advance...

Pass PO Num parameter to SAP transaction iview

Hi,
I have a table column in my WDJ application that contain PO number.
I have created an SAP Transaction Iview for TCode me23n (display po).
When user clicks on the PO number in the table column, it should dynamically pass the PO number to the transaction iview and display ME23N for that particular PO.   How can I pass the PO to this SAP transaction Iview?

Hi,
   You cannot do it with ME23N because the PO number field is not editable for this transaction. You have to navigate via the top-level menu to enter a new PO number. But you can do it for ME23, the older version of PO display.
   You will need to know the screen field name as well as the ok code that's fired when the user hits enter on the entry screen for ME23. Assuming you have the string for the PO number already from the table, you could use this code:
WDPortalNavigation.navigateAbsolute(
"ROLES://<pcd path of the SAP transaction iview>",
WDPortalNavigationMode.SHOW_INPLACE,
WDPortalNavigationHistoryMode.NO_DUPLICATIONS,
"RM06E-BSTNR=<PO string here>&OkCode=AB"
true,
true);
Regards,
Satyajit

Passing parameters to SAP Transaction iView

Hi,
We have a SAP Transaction iView (for ERP transaction SWK3) which works fine in our 7.0 portal using the following Application Parameters value:
P_CATID=BO&P_TYPEID=BUS2089&P_INSTID=<Request.P_INSTID>
At runtime, the parameters set with constant values are passed (i.e. P_CATID and P_TYPEID) successfully from the iView, while the url invoking the iView contains parameter P_INSTID which is dynamic (called from another iView).
For example, this may look as follows:
?P_INSTID=000614330000120800
Since we have upgraded to portal 7.4, the NWA log shows the following error for this process suggesting this is not a valid method of passing parameters any more.
om.sapportals.portal.appintegrator.ApplicationIntegratorException: Unable to process template 'P_CATID=BO&P_TYPEID=BUS2089&P_INSTID=<Request.P_INSTID>', because 'P_INSTID' is an invalid terminal property of context 'Request.'.
Please can you advise how to overcome this error for the dynamic parameter.
Thanks,
Alan

Hi Alexander,
Apologies for the late reply, I've been on an extended period of annual leave.
I've checked back on my notes and we retained the Application Parameters iView setting exactly as I state above but I had to ask our Java developer to explicitly add the static parameters P_CATID and P_TYPEID to the dynamic URL call to launch the iView.
So for example, an example URL would be:
... ivu.view_trip?sap-config-mode=true?P_CATID=BO&P_TYPEID=BUS2089&P_INSTID=000614330000120800
This cured the problem though I'm unsure whether it is still essential that the static parameters need to exist in the iView configuration. We had many issues at that moment in time I was just pleased to find a solution.
Good luck!
Alan

Interaction between SAP Transaction Iview to webdynpro application

Hi All,
I have a requirement where in,
I have one SAP Transaction Iview and one Webdynpro (Java) Iview,
Now what I have to do is,
I need to call Webdynpro app ( or iview) as a pop up from Transation Iview (e.g. click on some button on SAP screen),
webdynpro screen will be opened,
do some processing there (calling some web service, getting some data from an external system) and then posting response data back to some screen field in Transaction Iview.
It is like on a standard SAP transaction, I want to open my custom webdynpro screen to do some data operation and fill response data back to SAP screen once that is done.
any ideas would be heavily appreciated and rewarded!!!!!
Regards
Deepak

I wrote the code like below:
WDPortalNavigation.navigateAbsolute("ROLES://<IViewPath>", WDPortalNavigationMode.SHOW_EXTERNAL,
(String)null,
(String)null,
WDPortalNavigationHistoryMode.ALLOW_DUPLICATIONS,
(String)null,
(String)null,
"number=123456");
In IView application property, I wrote:
CRMT_SEARCH_LOC-CARD_NO=<Request.number>
(L.H.S is the screen field name)
then I got following exception at portal:
An exception occurred while processing a request for :
iView : pcd:portal_content/<Iview path>
Component Name : com.sap.portal.appintegrator.sap.Transaction
Exception in SAP Application Integrator occured: Unable to process template 'CRMT_SEARCH_LOC-CARD_NO=<Request.number>', because 'number' is an invalid terminal property of context 'Request.'..
what went wrong????

SAP Transaction in EP iView

Similar Messages

Maybe you are looking for