SAP Transaction iView issue...Please guide...urgent

Hello All,
1. I created a SAP Transaction iView.
2. Entered all the required WAS + ITS details and the connection tests are all successful.
3. While creating the iView I selected SAP GUI for HTML as I need to display the the ITS Internet template (from Internet Service)
Query:
1. When I preview the iView, I see the GUI (standard SAP) format but not the webgui.
Please guide.
Systems - EP 7.0 SP9 & ECC 6
Awaiting reply.
Thanks and Warm Regards,
Ritu

by default the iview uses the wingui - you need to change the SAP GUI Type (GuiType) attribute of your iview from wingui to webgui.
That should solve your problem.
Haydn

Similar Messages

Hiding R/3 Header in Portal SAP Transactional iView

Hi ,
I created an SAP Transactional iView with GUI Type as "SAP GUI for HTML". But when I am accessing the iView, then it is displaying properly. What I want is hiding the R/3 header in that Transaction iView.
I have read several Threads given below.
http://wiki.sdn.sap.com/wiki/display/HOME/Article%2b-%2bEmploy%2bSAP%2bGUI%2bfor%2bHTML%2binstead%2bof%2ban%2bInternet%2bservice
Transaction iView not to display R/3 header
I also have gone through the SAP Note: 1010519. But it talks about IAC iViews, etc.... But I want for the SAP Transaction iView.
Please let me know how to hide the R/3 Header for Transaction iView.
Thanks & Regards,
Ashok Kumar M.

Hi,
I am closing this, as I mentioned in my Post some of the links. I followed the same, and implemented. But it was not solved that time. Not sure, how it happened, I saw the change afterwards.
Thanks & Regards,
Ashok Kumar M.

Field's content is not fully visible in Sap Transaction iview

Hello Friends,
                I have deployed a Sap Transaction iview on my portal. I am facing a issue. When i do F4 help on a field, the content of columns is not fully visible in the opened up popup window.
    Is there any way to adjust the colum width, so that it accomodates the whole content and doesn't truncate it ?
    please help !
Regards,
Vidit

Hi Vidit,
Try to check your Transaction iview directly from the browser / through services not through the EP. If the iview is not working fine then thre is a problem in the code otherwise it has to work
Check your code and try to redeploy
Regards,
sreedhar G

Problem in Printing ABAP Report in EP using SAP Transaction IVIEW

Dear All,
A very gud evening,
I am using SAP Transaction Iview to show the ABAP Reports, But I have a Problem...
How to print this report???
Please solve this issue, I have measure requirement of it from client.
Thanks in Advance..

Thanks Haydn,
But my problem is that, there may be no of users will be accessing this report. user will not be having SAP GUI installed in his machine. He will be accessing Transaction IView after login in EP (from any where may be from cyber cafe) and He would like to take printout using any button on the screen.
So suppose any end user having only Internet Explorer installed in his machine, will he be able to take the print out. I think its very genuine requirement.
OR user can not take print out untill SAP GUI is installed in his machine???
Please suggest...
Thanks in advance...

Passing parameters to SAP Transaction iView

Hi,
We have a SAP Transaction iView (for ERP transaction SWK3) which works fine in our 7.0 portal using the following Application Parameters value:
P_CATID=BO&P_TYPEID=BUS2089&P_INSTID=<Request.P_INSTID>
At runtime, the parameters set with constant values are passed (i.e. P_CATID and P_TYPEID) successfully from the iView, while the url invoking the iView contains parameter P_INSTID which is dynamic (called from another iView).
For example, this may look as follows:
?P_INSTID=000614330000120800
Since we have upgraded to portal 7.4, the NWA log shows the following error for this process suggesting this is not a valid method of passing parameters any more.
om.sapportals.portal.appintegrator.ApplicationIntegratorException: Unable to process template 'P_CATID=BO&P_TYPEID=BUS2089&P_INSTID=<Request.P_INSTID>', because 'P_INSTID' is an invalid terminal property of context 'Request.'.
Please can you advise how to overcome this error for the dynamic parameter.
Thanks,
Alan

Hi Alexander,
Apologies for the late reply, I've been on an extended period of annual leave.
I've checked back on my notes and we retained the Application Parameters iView setting exactly as I state above but I had to ask our Java developer to explicitly add the static parameters P_CATID and P_TYPEID to the dynamic URL call to launch the iView.
So for example, an example URL would be:
... ivu.view_trip?sap-config-mode=true?P_CATID=BO&P_TYPEID=BUS2089&P_INSTID=000614330000120800
This cured the problem though I'm unsure whether it is still essential that the static parameters need to exist in the iView configuration. We had many issues at that moment in time I was just pleased to find a solution.
Good luck!
Alan

SAP transaction iview of GUI for html never works

Hi All,
We are implementing ESS/MSS on EP 7.0, ECC 6.0, ESS/MSS 600 landscapes for India Country grouping.
There are few SAP transaction iviews of type GUI for html and we tied up those to ESS Overview homepage framworks.
However, each of these transaction iviews throws the same error messages as below :
Error when processing your request
What has happened?
The URL http://hostname.domain:8001/sap/public/bc/its/mimes/system/sl/page/menubase.html was not called due to an error.
The following error text was processed in the system TD1 : This function is not possible
The error occurred on the application server TCSCQ1_TD1_01 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_ITS===============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP.
I have activated all of the ITS services from sicf transaction. Published all of the services (global, webdui, webdui_start, system, shuffler) to internal.
I also executed the Webgui service from sicf tcode. But, still the same error message persists. Am I missed any settings for Integrated ITS ?
When I enabled option (Display a notification about every script error) from IE options, the system keeps on giving the mesage 'window.wgu.global.eventhandler' is null or not an object, wgu.ObjEventHandler' is undefined etc.,
I have noticed that none of the ITS services never work.
I would appreciate if anyone can shade some light regarding this issue. Any guidance or inputs in this context would be of greatfully help.
Regards,
Anil Kumar.

Please don't cross post messages....

Property "OK Code Field" for SAP Transaction iViews

Hi there,
I created an SAP Transaction iView which is accessing an ECC system using SAP GUI for Html. In the properties of the iView I found the property "OK Code Field" - has anybody a idea how this field is used?
I hope that there is a possibility to hide the command field with this parameter. Haven't found a possibility to hide that field although I saw that obviously I'm not the first to deal with this issue...
Any help is rewarded.
Regards
Gesine

Hi,
To disable OK Code field,
- Go to SICF TCODE
- Expand to /default_host/sap/bc/gui/sap/its/webgui service
- double click to enter properties
- On Service Data TAB, click Settings Button
- You have to siwtch to change mode in order to change
- there add the following parameter
Parameter: ~NOHEADEROKCODE
Value: 1

Disadvantages of SAP Transaction iView

Hi Experts,
Please let me know what are the disadvantages of SAP Transaction iView?
Thanks & Regards,
Palaniappan A

Hello Palani,
I agree... It depends on the business requirement. For instance, there are cases where organizations don't want to take too much pain in maintaining the infra so they opt for Transaction iViews directly opening up the transaction code in SAP GUI. In such cases SAPGUI is also installed in Users PCs!
Of course you can always refer to the link given above for details.
Thanks
Avik

How to remove header from sap transaction iview using html

Hi ,
I have created SAP transaction iview for pv34 for SAP GUI for HTML .
FRom iview how to remove hear part .
i.e
menu ,back,exit,cancel............
I want to remove this complete header .
What property i need to work for ..
Thanks,
Surekha .

hi surekha,
check these wiki's regarding the similar issue
*[Employ SAP GUI for HTML instead of an Internet service |http://wiki.sdn.sap.com/wiki/display/HOME/Article%20-%20Employ%20SAP%20GUI%20for%20HTML%20instead%20of%20an%20Internet%20service]
[Howto customize the webgui header area |http://wiki.sdn.sap.com/wiki/display/HOME/Howtocustomizethewebguiheader+area]*
Regards,
Maheshchandra

Problem with SAP Transaction iView after Patch 34 install

Hi All,
We're running EP6SP2 on AIX/Oracle and have currently upgraded from PL5 to PL34.
The problem we are now having is as follows:
We have an SAP Transaction iView that is using the 'Auto' method for the 'Technique to start SAPGUI for Windows' and the 'WinGui' as the 'SAP GUI Type'.
Now when we click on the iView we are getting the IE popup that asks us if we want to Save, Open, or Cancel the file open for tx.ssd
Prior to the patch upgrade we did not have this issue.
Any help would be appreciated.
Thanks,
Robin.

Hi Praveen,
Thanks for the quick response.
I have seen those notes already and unfortunately they don't solve this specific problem. These will solve the problem for the SSD method (.sap file) of starting the SAPGUI for Windows but not for the SSF method (.ssf file).
The main issue is that before the install of the Patch we did not get the popup, everything worked fine. It doesn't make sense why we would have to change our IE settings now to get it to work properly. It should work the same as before the patch.
Plus, I don't want to have to do an SMS push to all the PC's here to fix a problem with a Patch upgrade.
I have tried to add the .ssd and .sap types to the Mime section for the http service in the Admin tool but this hasn't fixed the problem either.
Also, I found that in Patch 31 SAP has made a change to the way the SAP GUI for windows starts. After some searching I found that in the file WinGuiRenderLayer.properties under
the 'com.sap.appintegrator.sap/property/Transaction/' folder I see that it has some entries in it that look like they relate to the above mentioned fix for Patch 31. The lines in particular are:
- # postfix for roundtrip URL - should help IE to detect the mime-type
- SSF_URL_Postfix = /tx.sap
- SSD_URL_Postfix = /tx.ssd
These lines were not in this file prior to implementing the patch and I believe that this may be causing the problem.
Any other suggestions would be appreciated.
Thanks,
Robin

Does each SAP transaction iview create a log on to the backend ECC?

Hi,
If I put multiple SAP transaction iviews in a role, each pointing to a different SAP transaction in the same backend system, does the launch of each iview create a new logon in the backend system when using SAP logon tickets? If so, is it possible to make it only launch a new session if one logon has already been created?
Regards
Cindy

Hello Cindy,
launching of diffrent Transactio Iview form same back end is quite similar as loged in to backend with Proper credentials and opening diffrent transaction's by useing
/oxx(Transaction Name)
Hope it will add to ur knowladge.
Regards.
Soni Vinit

Error while Creating SAP Transactional iView

Hi
I am trying to create an SAP Transaction iview to connect with SAP CRM system, i selected property WebHTML
but i coule notable to connect to that TCode iview.
For this i created a System with User Credentials that will map to the back end system.
It is connecting to the backend system using BSP Application which are presented in the Business Packages.
Wheather ITS should be configured to get this feature.
If so provide me the proper steps to configure ITS.
Regards

its path should be
its path : /sap/bc/gui/sap/its/
or you can leave it blank.
if this is the first time you are running ITS application (WEBGUI).
then go to transaction se80->utilities->settings->Internet transaction server->pulish
choose onselected site radio button and choose INTERNAL
click ok to come out of it.
now choose internet service from the dropdown and enter SYSTEM and hit enter.
right click on SYSTEM and click publish
like wise publish WEBGUI and SHUFFLER services.
now go to transaction SICF and go to
sap/bc/gui/sap/its/webgui
right click on webgui and click test, which will open the browser and show its screen, if yes.
then you can now check your iview.
Regards
Raja

SAP transaction iView not executing the transaction directly

Hello guys,
having a little problem with SAP transaction iView I created - specified system, where the transaction is delpoyed. When I click on the page containing the iView, R/3 logon page comes up instead of the transaction itself being executed. The user and password are the same for the portal and R/3. Do I have to do the mapping then? I so, it would mean I would have to crate mapping for every single portal user. Isn't it possible to make the portal to automatically use the user id/password of the logged-in user?
Thanks a lot for any ideas at all,
Frank

Arun,
I am a bit confused now to be honest. If you mean 'SAP GUI Type' property, at the moment it is set to 'Select' value - it means that no value is selected. I already tried to use 'WinGui' but I couldn't get through to R/3 transaction either.
We are using standalone ITS.
Thanks,
Frank

How to get the Portal Username to SAP Transaction IView ( ABAP cust repor )

Hi Experts,
We have an ABAP program that will be exposed in portal as SAP transaction IVIEW. However the username that is being displayed in the report is the username that is defined in SICF > SAP > BC > GUI > ITS > WEBGUI. I tried to remove the username and password defined, changed the procedure to Alternative Logon Procedure and deleted some logon procedure list retained Basic and SSO Authentication but we are getting DDIC username. We have successfully implemented SSO, and it works in Personal Information of Standard ESS. The following are configure in our portal:
1. We have set SSO ticket
2. We are using User Mapping for portal and ABAP System
3. Retain Basic and SSO authentication
what could be the cause why the program (iview) is still getting the user instead of Portal Username? How can we get the portal username for our abap customized report exposed in iview

Hi,
Make sure that the System you are using to connect to R3 has Log On Method and Authentication Ticket Type properties has SAP LOGON TKT as the value selected.
Path: System Administration --> System Configuration ---> Systems....
Regards,
SrinivaS

Pass PO Num parameter to SAP transaction iview

Hi,
I have a table column in my WDJ application that contain PO number.
I have created an SAP Transaction Iview for TCode me23n (display po).
When user clicks on the PO number in the table column, it should dynamically pass the PO number to the transaction iview and display ME23N for that particular PO.   How can I pass the PO to this SAP transaction Iview?

Hi,
   You cannot do it with ME23N because the PO number field is not editable for this transaction. You have to navigate via the top-level menu to enter a new PO number. But you can do it for ME23, the older version of PO display.
   You will need to know the screen field name as well as the ok code that's fired when the user hits enter on the entry screen for ME23. Assuming you have the string for the PO number already from the table, you could use this code:
WDPortalNavigation.navigateAbsolute(
"ROLES://<pcd path of the SAP transaction iview>",
WDPortalNavigationMode.SHOW_INPLACE,
WDPortalNavigationHistoryMode.NO_DUPLICATIONS,
"RM06E-BSTNR=<PO string here>&OkCode=AB"
true,
true);
Regards,
Satyajit

SAP Transaction iView issue...Please guide...urgent

Similar Messages

Maybe you are looking for