SAP Transcation Iview

HI,
I want to access SAP ECC System outside the network and we don't have authorization to install SAP GUI software as well.
For this i tried to create a SAP Transcation iview with SAP GUI for HTML.This is not working?
Is this right way what iam doing?If yes then y its not working?
Is there any way to access the same?
Pavani,

Hi Pavani,
You said I want to access SAP ECC System outside the network like this, Please check it are you able to access to ECC System from your local System. Please check it cmd Promt its Pinging or not(Ping IP Address).
If you are not able to ping the ECC System outside the network. Then Check with BASIS Team to get the access.
If pinging...Please follow the below steps and check once again.
Before creating SAP Transaction iView you will need to create System Object for that ECC System, to create a System Object, please follow the below link.
Please look at this [wiki|https://wiki.sdn.sap.com/wiki/x/8z4&nbsp]
After Creating System Object and System alias. Please check it wether Connection Testing working or not.Now after creating System object, to create iView for the same.
1) Select the Folder you have created.
2) Right Click the Folder and in the Panel, choose IView template.
3) Choose SAP Transaction iView.
4) Give iView Name and iView Id, choose next.
5) Choose SAP GUI for HTML.
6) In order to create a Transaction you first need to create a System Object and then System Alias
7) Select the System from the List displayed and give the Transaction Code. Choose next.
8) Save the changes and test the iView by clicking Preview Button
Hope this helps!!
Regards
Vijay K

Similar Messages

SAP transactin Iview permissions

Dear All,
I am very new to portals. I created a SAP transaction iview and i am able to connect to R/3 and able to see the transaction. I need to give permission to that transaction only, but here I am entering in to R/3 and based on R/3 authorization i am able to check all other transactions. But i need to give access to only one transaction. How it is possible. Please help me out ASAP.
Thanks in Advance,
Chandu.

Hi Chandu,
You just have to create new iview type R/3 transcation and give transcation code in respective field.
This iview you need to create in portal content, ie., login to portal as portal administrator and create iview at portal content.
In respect to permissions, if you keep the r/3 System landscape object as logon ticket issue, there is no need for excessive permissions. if R/3 SLD is updw then go to system administration - permissions- open the R/3 SLD permissons and assign the user for whom you want to give permissions for this R/3. check box on end user also.
regards
satish kumar
please forgot to post point in SDN

Hiding application bar in transcation iview

Hi
I created a transcation iview,in which i want to hide application bar ,Can any one tell me how to achieve this.
Thanks
Rahul

hi
Set these two parameters in your iview
Parameters Forwarded to Transaction
NOHEADEROKCODE=1, WEBGUI_SIMPLE_TOOLBAR =32
Check these links..
https://websmp230.sap-ag.de/sap/support/notes/1010519
https://www.sdn.sap.com/irj/scn/wiki?path=/display/home/article%2b-%2bemploy%2bsap%2bgui%2bfor%2bhtml%2binstead%2bof%2ban%2binternet%2bservice
/people/prakash.singh4/blog/2005/10/07/how-to-launch-sap-transaction-pass-parameters-via-url
Best Wishes
Idhaya R

Does each SAP transaction iview create a log on to the backend ECC?

Hi,
If I put multiple SAP transaction iviews in a role, each pointing to a different SAP transaction in the same backend system, does the launch of each iview create a new logon in the backend system when using SAP logon tickets? If so, is it possible to make it only launch a new session if one logon has already been created?
Regards
Cindy

Hello Cindy,
launching of diffrent Transactio Iview form same back end is quite similar as loged in to backend with Proper credentials and opening diffrent transaction's by useing
/oxx(Transaction Name)
Hope it will add to ur knowladge.
Regards.
Soni Vinit

Error while Creating SAP Transactional iView

Hi
I am trying to create an SAP Transaction iview to connect with SAP CRM system, i selected property WebHTML
but i coule notable to connect to that TCode iview.
For this i created a System with User Credentials that will map to the back end system.
It is connecting to the backend system using BSP Application which are presented in the Business Packages.
Wheather ITS should be configured to get this feature.
If so provide me the proper steps to configure ITS.
Regards

its path should be
its path : /sap/bc/gui/sap/its/
or you can leave it blank.
if this is the first time you are running ITS application (WEBGUI).
then go to transaction se80->utilities->settings->Internet transaction server->pulish
choose onselected site radio button and choose INTERNAL
click ok to come out of it.
now choose internet service from the dropdown and enter SYSTEM and hit enter.
right click on SYSTEM and click publish
like wise publish WEBGUI and SHUFFLER services.
now go to transaction SICF and go to
sap/bc/gui/sap/its/webgui
right click on webgui and click test, which will open the browser and show its screen, if yes.
then you can now check your iview.
Regards
Raja

How to create 'SAP BSP iView'?

All,
I am trying to to create a 'SAP BSP iView' in EP 7.0.
On creating the BSP Application iView in SAP Portal, I get the following error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Application URL 'http:///sap/bc/bsp/sap/BEAD_CRMB_BD/entrypoint.do' is not valid! Please check the protocol and host entries for system 'ABCDSystem'..
Application Namespace: sap (defaulted by portal)
Customer Namespace: sap (defaulted by portal)
Business Server Page (BSP) Application: BEAD_CRMB_BD
Application Parameters: crm_bsp_frame
Start Page: entrypoint.do
On deploying the Application in SE80, the application is displayed at the following url.
http://xxx:8001/sap(bD1lbiZjPTQ0MCZkPW1pbg==)/bc/bsp/sap/crm_bsp_frame/entrypoint.do?sap-client=440&appl=BEAD_CRMB_BD&version=1
Any thoughts as to why this iView is not working would be greatly appreciated.
SAP Partner

Umair,
As suggested I have made the following changes:
Application Namespace: sap (defaulted by portal)
Customer Namespace: sap (defaulted by portal)
Business Server Page (BSP) Application: crm_bsp_frame
Application Parameters:
Start Page: entrypoint.do
I have checked my system connection from portal to backend system and it works.
When I try to preview the iView, I get the following error.
- a pop up saying "Session management will not work, please check DSM log file for details"
Any thoughts....
SAP partner

Field's content is not fully visible in Sap Transaction iview

Hello Friends,
                I have deployed a Sap Transaction iview on my portal. I am facing a issue. When i do F4 help on a field, the content of columns is not fully visible in the opened up popup window.
    Is there any way to adjust the colum width, so that it accomodates the whole content and doesn't truncate it ?
    please help !
Regards,
Vidit

Hi Vidit,
Try to check your Transaction iview directly from the browser / through services not through the EP. If the iview is not working fine then thre is a problem in the code otherwise it has to work
Check your code and try to redeploy
Regards,
sreedhar G

SAP Portal Network - WebDynpro iView and SAP Application iView sharing

Hello All,
I've read about the restrictions in SAP Portal supporting the WSRP standard for application sharing. Mainly WebDynpro iViews and SAP application iViews sharing is not supported. That is in the case of a SAP Portal as producer and Non-SAPPortal as consumer.
I'm interested in a WebDynpro iViews and SAP application iViews sharing in a only-SAP Portals Network, where SAP Portals act as producer and consumer.
I've heard about the Remote Role Assignment and Remote Content Copy that are used in such case. I would like to ask if anyone knows if these can help overcome the restriction in sharing WebDynpro iViews and SAP application iViews that is present with WSRP? And if the advantage of WSPR, that is the application execution and rendering on the producer side, and as follows decreasing of bandwidth usage, is remaining in the case of the Remote Role Assignment and Remote Content Copy.
Thanks,
Mladen

Hi Manish,
for sharing content between SAP and non-SAP Portals, your case, refer to
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/23fb36cad10d23e10000000a1553f7/frameset.htm
All the possibilities and restrictions of WSPR in the case of SAP EP are explaind there.
For sharing content between only SAP Portals refer to my other thread:
Portal Network - Content Sharing
Hope it helps you!
Mladen

SAP transaction iView not executing the transaction directly

Hello guys,
having a little problem with SAP transaction iView I created - specified system, where the transaction is delpoyed. When I click on the page containing the iView, R/3 logon page comes up instead of the transaction itself being executed. The user and password are the same for the portal and R/3. Do I have to do the mapping then? I so, it would mean I would have to crate mapping for every single portal user. Isn't it possible to make the portal to automatically use the user id/password of the logged-in user?
Thanks a lot for any ideas at all,
Frank

Arun,
I am a bit confused now to be honest. If you mean 'SAP GUI Type' property, at the moment it is set to 'Select' value - it means that no value is selected. I already tried to use 'WinGui' but I couldn't get through to R/3 transaction either.
We are using standalone ITS.
Thanks,
Frank

Sap query iview error

Hi there!
I have a sap query iview in the portal that should display a query in CRM (build with SQ01). The query in the backend is fine, but I get this error message in the portal.
"Error in Source. Message not available"
I have double-checked that the connection parameters of the sap query iview are OK, also I have run a DQE connection test on the system that was(see below) also OK.
Any thoughts on this?
Thanks in advance
-fab
p.s. I reward points generously
Test Connection through the DQE
Test Details:
The test consists of the following steps:
1. Checks the existence of a backend admin user ID/password in the system properties.
2. Checks the existence of a default alias for the system.
3. Checks the DQE connection.
Results
1. Backend admin user ID and password exist in the system properties.
2. Default alias of the system exists.
3. DQE connection successful. If you continue to experience problems, verify the DQE admin user ID and password properties for this system object.

Thanks for the help Michael. Here is the xml file, I have also sent it to your email address.
Cheers,
faB
- <GenericCreator author="XML Creator" version="XML Automatic Creation" mode="clean,execute" report.level="success" createMode="1" default.locale="en" ignore="false">
<Property name="parent1" value="pcd:portal_content/XXX/XXXXXX/IVIEWS" />
- <Context name="qtf" objectClass="com.sapportals.portal.iview" create_as="0" template="par:/applications/com.sap.pct.srv.portaldataviewer/components/SAPQueryTemplate" parent="$">
- <Attributes>
- <Attribute name="com.sap.portal.private.iview.PropertiesUrl" type="string">
<AttributeValue value="pcd:com.sap.portal.system/applications/com.sap.pct.srv.portaldataviewer/components/SAPQueryTemplate" />
</Attribute>
- <Attribute name="PDVParameterQUERY_WORKSPACE" type="string">
<AttributeValue value="G" />
</Attribute>
- <Attribute name="PDVParameterQUERY_VARIANT" type="string">
<AttributeValue value="TEST" />
- <Attribute name="personalization" type="string">
<AttributeValue value="NO_DIALOG" />
</Attribute>
</Attribute>
- <Attribute name="PDVParameterQUERY_NAME" type="string">
<AttributeValue value="ZQ_ECCSPO_01" />
</Attribute>
- <Attribute name="PDVParameterQUERY_USERGROUP" type="string">
<AttributeValue value="ECCSPO" />
</Attribute>
- <Attribute name="PDVParameterQUERY_CREATE_SELTAB_FM" type="string">
<AttributeValue value="" />
- <Attribute name="personalization" type="string">
<AttributeValue value="NO_DIALOG" />
</Attribute>
</Attribute>
- <Attribute name="com.sap.portal.iview.MainObject" type="string">
<AttributeValue value="" />
</Attribute>
- <Attribute name="SystemIdentifier" type="string">
<AttributeValue value="SAP_CRM" />
</Attribute>
</Attributes>
</Context>
</GenericCreator>

How to get the Portal Username to SAP Transaction IView ( ABAP cust repor )

Hi Experts,
We have an ABAP program that will be exposed in portal as SAP transaction IVIEW. However the username that is being displayed in the report is the username that is defined in SICF > SAP > BC > GUI > ITS > WEBGUI. I tried to remove the username and password defined, changed the procedure to Alternative Logon Procedure and deleted some logon procedure list retained Basic and SSO Authentication but we are getting DDIC username. We have successfully implemented SSO, and it works in Personal Information of Standard ESS. The following are configure in our portal:
1. We have set SSO ticket
2. We are using User Mapping for portal and ABAP System
3. Retain Basic and SSO authentication
what could be the cause why the program (iview) is still getting the user instead of Portal Username? How can we get the portal username for our abap customized report exposed in iview

Hi,
Make sure that the System you are using to connect to R3 has Log On Method and Authentication Ticket Type properties has SAP LOGON TKT as the value selected.
Path: System Administration --> System Configuration ---> Systems....
Regards,
SrinivaS

Problem in Printing ABAP Report in EP using SAP Transaction IVIEW

Dear All,
A very gud evening,
I am using SAP Transaction Iview to show the ABAP Reports, But I have a Problem...
How to print this report???
Please solve this issue, I have measure requirement of it from client.
Thanks in Advance..

Thanks Haydn,
But my problem is that, there may be no of users will be accessing this report. user will not be having SAP GUI installed in his machine. He will be accessing Transaction IView after login in EP (from any where may be from cyber cafe) and He would like to take printout using any button on the screen.
So suppose any end user having only Internet Explorer installed in his machine, will he be able to take the print out. I think its very genuine requirement.
OR user can not take print out untill SAP GUI is installed in his machine???
Please suggest...
Thanks in advance...

SAP Query iview properties

Hi Portal guru
I am trying to create SAP Query iview but I am facing some problem.
In EP 6.0 there was a standard template for creating Query iview, but there is no standard template in EP 7, but we should create a new iview from par com.sap.pct.srv.portaldataviewer.SAPQueryTemplate .
in properties for EP 6 iview there is a property called SystemIdentifier (as in the file JCODestinatin.xml).
i need solution for what is this property and where can we get that JCODestinatin.xml
Pls give me solution for this ASAP.
rewarded with High Points.
Regards
Sumit

Is this of any help?
Re: ABAP Query in iView
Regards,
Slava

Pass PO Num parameter to SAP transaction iview

Hi,
I have a table column in my WDJ application that contain PO number.
I have created an SAP Transaction Iview for TCode me23n (display po).
When user clicks on the PO number in the table column, it should dynamically pass the PO number to the transaction iview and display ME23N for that particular PO. How can I pass the PO to this SAP transaction Iview?

Hi,
 You cannot do it with ME23N because the PO number field is not editable for this transaction. You have to navigate via the top-level menu to enter a new PO number. But you can do it for ME23, the older version of PO display.
 You will need to know the screen field name as well as the ok code that's fired when the user hits enter on the entry screen for ME23. Assuming you have the string for the PO number already from the table, you could use this code:
WDPortalNavigation.navigateAbsolute(
"ROLES://<pcd path of the SAP transaction iview>",
WDPortalNavigationMode.SHOW_INPLACE,
WDPortalNavigationHistoryMode.NO_DUPLICATIONS,
"RM06E-BSTNR=<PO string here>&OkCode=AB"
true,
true);
Regards,
Satyajit

Passing parameters to SAP Transaction iView

Hi,
We have a SAP Transaction iView (for ERP transaction SWK3) which works fine in our 7.0 portal using the following Application Parameters value:
P_CATID=BO&P_TYPEID=BUS2089&P_INSTID=<Request.P_INSTID>
At runtime, the parameters set with constant values are passed (i.e. P_CATID and P_TYPEID) successfully from the iView, while the url invoking the iView contains parameter P_INSTID which is dynamic (called from another iView).
For example, this may look as follows:
?P_INSTID=000614330000120800
Since we have upgraded to portal 7.4, the NWA log shows the following error for this process suggesting this is not a valid method of passing parameters any more.
om.sapportals.portal.appintegrator.ApplicationIntegratorException: Unable to process template 'P_CATID=BO&P_TYPEID=BUS2089&P_INSTID=<Request.P_INSTID>', because 'P_INSTID' is an invalid terminal property of context 'Request.'.
Please can you advise how to overcome this error for the dynamic parameter.
Thanks,
Alan

Hi Alexander,
Apologies for the late reply, I've been on an extended period of annual leave.
I've checked back on my notes and we retained the Application Parameters iView setting exactly as I state above but I had to ask our Java developer to explicitly add the static parameters P_CATID and P_TYPEID to the dynamic URL call to launch the iView.
So for example, an example URL would be:
... ivu.view_trip?sap-config-mode=true?P_CATID=BO&P_TYPEID=BUS2089&P_INSTID=000614330000120800
This cured the problem though I'm unsure whether it is still essential that the static parameters need to exist in the iView configuration. We had many issues at that moment in time I was just pleased to find a solution.
Good luck!
Alan

SAP Transcation Iview

Similar Messages

Maybe you are looking for