SAP Treasury - error message from posting TBB1

Hi Treasury Experts,
When posting to TBB1 i got the below errors
E: no postings for the payment request
E: update position management
I:  charge/tax fixed from date
please suggest me to resolve the above issue.
Thanks in advance
Regards
Prasad

Hi,
Can you please post the full error message?
Maybe it is because of partner details.
Regards,
Ravi

Similar Messages

  • Error Message from  SAP GUI

    Hi,
    I have designed a Custom screen for one of my requirements. However when the screen is displayed, I am facing an error message from SAP Front End Server that  says " Erroneous data received from server. Application may not work correctly".
    What could be the reason ?
    Thanks & Regards,
    Venkatesh.

    Hi,
    Please check the belos SAP notes
    1453114    Maximum string length
    1161022    Dialog box "Erroneous data received from server"
    1524462 - Erroneous Data received from server. Application may not work correctly.
    Regards,
    Naveen.

  • Error message from trace result-SAP BI

    All,
    I got an error message from RSRT trace-you have no authorization for info provider---EYE 001.
    WHAT IS MEAN BY EYE 001???

    Hi,
    Please check the belos SAP notes
    1453114    Maximum string length
    1161022    Dialog box "Erroneous data received from server"
    1524462 - Erroneous Data received from server. Application may not work correctly.
    Regards,
    Naveen.

  • I am unable to print PDF's using either Adobe Reader or Safari. In Adobe Reader, I get an error message from my Cannon printer that says, "/usr.libexec/cups/filter/pstocupsraster failed". In Safari, I can only print the first page of a PDF.

    To try to resolve this problem, I have done the following actions.
    1 - I have run Disk Warrior.
    2 - I have repaired permissions.
    3 - I have deleted all plist that are either Cannon or Adobe.
    4 - I have downloaded and installed the lastest versions of Adobe Reader and the Cannon printer drivers.
    I am still unable to print PDF's.
    In Safari, I can print only the first page. In a multipage PDF, Safari only seems to recognize the first page.
    In Adobe Reader, I get an error message from my printer: "/usr/libexec/cups/filter/pstocupsraster failed".
    Any help would be greatly appreicated!

    Quit Safari.
    Open the Library folder in your home folder as follows:
    ☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
    ☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
    ~/Library
    Delete the following items from the Library folder:
    Caches/com.apple.Safari/Cache.db
    Preferences/com.apple.quicktime.plugin.preferences.plist
    Preferences/QuickTime Preferences
    Relaunch Safari and test.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.

  • Error message from the source system, Caller 09 contains an error message.

    Hi,
        Guru's, i got an error massage when my process chain is running(Daily) in BIW 7.0, the error got in Data Loading from source to PSA or data targets. The errors having the below details
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.   "
    Can any body help me out of this situation what to do and how to resolv ethe problem.
    Thanks and Regards,.
    Taps....

    Caller 09 is a very common issue - please search the forums before posting....
    Arun

  • Error message from ABAP to BW portal

    Hi
    I need to write error message from ABAP to BW portal.
    If I write as usual: message E001(ZBW).
    Then I get a dump in portal.
    Does anyone know how to post error message in this case?
    Thanks.

    Hi,
    You need to use the function module RRMS_MESSAGE_HANDLING to post any kind of messages in the report output/web template or portal.
    You can pass the values trough the below parameters:
                  I_CLASS  = 'ZBW'
                  I_TYPE   = 'W'
                  I_NUMBER = '006'
    Regards,
    Shilpa

  • Error message from ABAP to portal

    Hi
    I need to write error message from ABAP to BW portal.
    If I write as usual: message E001(ZBW).
    Then I get a dump in portal.
    Does anyone know how to post error message in this case?
    Thanks.

    Hi
    Good
    Check the below sdn link.
    portal runtime error in BW
    Thanks
    mrutyun^

  • Error message from Application Server

    Hi All,
    Is it possible to capture a descriptive error message from the Application server when we try to transfer a file from SAP and it does not get written to the application server.
    I know it is possible to catch the standard catchable runtime exceptions, but I also would like to know if the file transfer fails in any other conditions which do not result in runtime dumps, nevertheless I should be able to get the error message.
    Thanks in advance,

    hi,
    it is not possible to find the run time errors in application server while writing the file.using sy-subrc only we can find out. where it is writing correctly like this.
    we can see all the application server files in this Tcode: AL11

  • Dynamic Error Message from a Bundle Showed in a rich:fileUpload

    Hello.
    There is a way to show a dynamic error message from a bundle (i.e, There is a problem in the word {0} in line {1}.) in a rich:fileUpload after the Managed Bean method in fileUploadListener="#{MyManagedBean.myMethod}" attribute was performed? That's because the error message parameters are discovered only after the MyManagedBean.myMethod execution.
    As far I know, I'm able only to show a static message with transferErrorLabel="#{myBundle.myErrorMessage}" attribute.
    Here is my rich:fileUpload component code:
      <rich:fileUpload id="upload"   
         fileUploadListener="#{PlanilhaManagedBean.importar}"  
         maxFilesQuantity="100" 
         immediateUpload="true" listHeight="130" acceptedTypes="xls"  
         addControlLabel="#{bundle.geralProcurarArquivo}" 
         ontyperejected="alert('#{bundle.geralExtensaoInvalida}')"    
         cancelEntryControlLabel="#{bundle.geralCancelar}" 
         clearAllControlLabel="#{bundle.geralLimparTudo}"     
         clearControlLabel="#{bundle.geralLimpar}" 
         doneLabel="#{bundle.geralArquivoTransferidoComSucesso}"  
         progressLabel="#{bundle.geralTransferindoArquivo}" 
         stopControlLabel="#{bundle.geralParar}"  
         stopEntryControlLabel="#{bundle.geralParar}" 
         transferErrorLabel="#{bundle.geralErroNaTransferenciaDoArquivo}" /> Any idea?
    Thanks in advance.

    Hi, BalusC. Thanks for your reply.
    I already tried that. I put a navigation-rule in faces-config.xml to the same page of the rich:fileUpload, but the rich:fileUpload component doesn't starts a get or a post request. So the navigation-rule is ignored and the page wasn't rendered again.
    I also tried to put the <a4j:support ...> in the rich:fileUpload to re-render the <h:messages ...> component, but didn't work too. The <h:messages ...> wasn't re-render.
    Thanks in advance.
    Edited by: reolca on May 10, 2009 5:40 AM

  • A way to display error messages from the program

    Dear all,
    I am looking forward to display a set of error messages(in a internal table) during the execution of the program to the user.
    I wanted to know the better way of displaying error messages from my program with more options.
    Well I tried out using displaying errors as ALV list/Grid or as simple list processing.
    But I found some  stanadard transactions (Like in MM and FI  where errors are shown in a better way, but failed to find out how they are done.
    Please guide me.
    Thanks in advance
    Aryan

    Try to use application logging it has a very good way to display a set of messages.
    [http://abap4.tripod.com/Using_Application_Logging.html|http://abap4.tripod.com/Using_Application_Logging.html]
    Run this report in se38 an example sap report to understand logging way to show a set of messages
    Report Name  :  SBAL_DEMO_01
    Edited by: Vighneswaran CE on Dec 19, 2010 3:01 PM
    Edited by: Vighneswaran CE on Dec 19, 2010 3:11 PM

  • Error message from Antivirus

    I keep getting this error message from my Antivirus. Please see attachment. Can anyone tell me what is means where to find it and how to stop it please?.

    "Avast" is perhaps the worst of the whole wretched lot of commercial "security" products for the Mac. It's worse than the imaginary "viruses" you were worried about when you installed it. Not only does it fail to protect you, it throws false warnings, destabilizes and slows down your computer, and sometimes or always corrupts the network settings and the permissions of files in your home folder. Removing it may not repair all the damage, and neither will Disk Utility or even reinstalling OS X.
    Back up all data, then remove "Avast" according to the developer's instructions. Reboot.
    If you tried to remove Avast by dragging an application to the Trash, you'll have to reinstall it and follow the instructions linked above.
    If you still have problems after following those instructions, post again.

  • 'Cannot obtain error message from server' when trying to use ODBC

    Post Author: Grant C
    CA Forum: Data Connectivity and SQL
    Hi, I'm developing some reports using Crystal XI on my local PC, using an Oracle 10i back end on a separate server.  The SQL for the report is in a method in an oracle package.
    When I set the datasource location, selecting 'Oracle Server' then entering the details works fine, and the report runs.  However, when I try to use an ODBC connection I get the following error:
    Database Connection Error: 'Cannot obtain error message from server.'
    The ODBC link is set up as a System DSN, which works fine when I test it.  I think I need to use ODBC as some of the reports (which I inherited) seem to fail when run on the Crystal Server, and it seeme to be the ones set up with ODBC which work.
    Any thoughts?  Thanks.

    Hi Mars-
    It sounds like your NI-DAQ installation may have become corrupted. I would suggest uninstalling and reinstalling the DAQmx 7.4 driver to correct this problem and ensure that you're up to date. This download is available here: NI-DAQ 7.4
    If the problem persists you may want to uninstall and reinstall LabVIEW and then NI-DAQ in that order. The error message will usually give an indication as to which VI the error occurred in. Please let us know which VI is failing if you're unable to avoid the error with these suggestions.
    Have a good day-
    Tom W
    National Instruments

  • Property Bee not working properly keep getting error messages about post codes

    Every time I open a new page on Rightmove I get an error message about post codes

    If you use a bookmark to reach specific pages then try to start with the main (home) page of the website and navigate from that main page to those bookmarked pages in case the bookmarks are no longer working.

  • Delete windows warnings, error messages from hard drive

    delete windows warnings, error messages from hard drive

    Hello @NeoTaino,
    I have read your post on how your desktop computer is displaying a "delete Windows warning, error messages from hard drive". Did you install any hardware or software recently? What does the full error message state as it appears on the screen? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
    Cheers!
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • I'm getting an error message from Firefox that says, "Something is trying to trick Firefox into accepting an insecure update. Please contact your network provider and seek help."

    I'm getting an error message from Firefox that says, "Something is trying to trick Firefox into accepting an insecure update. Please contact your network provider and seek help." Do you know what is going on here--what this problem could be? (I do have the latest Firefox version already installed. I have previously received Firefox error messages that say "Firefox Update Failed." However, I already had the latest Firefox version installed when I received those error messages.)

    Apparently this occurs when Firefox has problems with security certificates. There have been a few questions about this. I will try to get advice about this.
    Apparently you are using Internet Explorer 9 (From your system details). Do you have Google Updater plugin installed on Firefox ?
    (That been implicated in this sort of problem by one poster, and some users with the problem do have Google Updater, but some do not)

Maybe you are looking for