SAP Trip Processing Status disappeared after EP6U Upgrade

Hi All,
The Main screen in T&E Portal where user sees the Processing Status of Submitted Expense has gone missing after the EP6U upgrade. Any idea what would have gone wrong? Only Specific Processing Status " Transferred to FI" is being shown.
Kindly help where to check and change this.
Regards,
Anand R

Hello
I dont really get what exactly your problem is (which page ?? which scenario??)...
But to check which webdynpro component is linked to a portal iview you can use right click in page as shown below :

Similar Messages

3G icon in the status bar got disappear after ios upgrade 8.1

3G icon in the status bar got disappear after ios upgrade 8.1

Nginear48 wrote:
Thanks for your quick response. I've tried everything you suggested and get only temporary fixes. Sometimes for a day or two, sometimes only until I use Safari for the first time. It's annoying and probably effects battery life between charges.
You would think that it must have some effect on the battery, but oddly enough, the update to iOS 8 actually helped my battery life, in spite of all of these hinky little issues that are taking place. In my experience, the activity icon is not affecting the battery in a negative way.
Another issue with IOS 8.1 that you may have seen is the loss of icon pictures on home pages. Again it seems to be Safari related, since app icons found in the App Store are not affected, only web based icons you personally put on home pages. I get what I call a test screen similar to what you used to get on old tv sets on every one of my personal icons.
I know exactly what you mean. I got that as well. On a few of them, when I opened the websites using the generic test screen icons and then closed them, they changed back to the way that they should look. For the ones that did not change, I recreated the home screen shortcuts and deleted the generic looking ones - the test screen icons.
And don't get me started on iBooks.
For the very limited use that I make of the iBooks app, i haven't noticed any problems, but I rarely use the app. I don't read books on the iPad other than a few user guides and if they are pdf guides, they reside in more reliable and feature rich pdf apps on my iOS device.
I wish that I had the fix for the spinning activity icon, but everything that I try, is temporary at best. IMO, this is the buggiest iOS update that I have seen, and I have been using iOS devices since iOS 3 on my first iPad. I realize that there are plenty of people that are not experiencing issues, but I have seen a number of weird things that I wish I could fix. None of my problems are major, but they are annoying.

All my Notes disappeared after ICloud upgrade

All my Notes disappeared after ICloud upgrade. I cannot find them, nor a way to recover them from backups? Any ideas? This is a BIG hiccup!

I posted this on another discussion:
Similar problem: I was at a store today and went to my Notes on iPhone 3GS to look up information recorded there about medications for an aging parent. I am syncing through iCloud so the same notes are on my iPhone, iPad 1, and desktop Mac (in Mail). I opened one note, but it didn't have the information I needed, so I went back to the main Notes list and picked another of the dozen notes. I was scrolling down through that note and then suddenly....poof....the note was gone. ALL the notes were gone. The note pad said NO NOTES. ***???!!!!
They were gone from my iPad, too. The notes represent information gathered and organized from multiple years (with no problems until now). The notes are information I NEED. I created a test note, it showed up on my devices. Then I chose to delete it to see if a single key click could do that. The app requires a second click on a Delete Note button as confirmation. And there's no way to delete ALL notes while viewing a single note, deliberately OR accidentally.
Any suggestions about how to recover the notes lost today? Thanks in advance.

Why mouse arrow disappears after I upgraded to osx Mavericks

why mouse arrow disappears after I upgraded to osx Mavericks-==

After I upgraded to Mavericks, Quicktime has had to convert MPEG-4 videos to .mov.... Why? Is there a way to stop that or to change the settings?
Your question requires more information. What does MPEG-4 mean to you? What file container and which compression formats are you referring to here? Is the MPEG-4 content "standard" or proprietary. Basically, depending on the file container and the specific content, QT X v10.3 may initiate a conversion ever where the individual data tracks are fully QT compatible. Proprietary compression formats will definitely do this. In some cases, the audio or video in one source container may simply be passed through to the MOV file while in another source container, QT X v10.3 forces a conversion of that same data track. In short, there are too many variables at this point to properly answer your question or attempt to duplicate your workflow.

SAP Query selection screen issues after ECC upgrade

Hi all
We have a custom query created and assigned to a custom transaction code, which after upgrade to ECC 6.0 we find that the selection screen layout is different from what was available in 4.6C system.
All the fields required are available.
However, the sequence of the fields on the screen is different from the 4.6C after the upgrade.
Can anyone help identify the issue so that the issue can be resolved?
Thanks
Vinodh S

Hi N_niki
There is no resolution as such.
We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
Hope this helps.
Thanks
Vinodh Sudhakaran

My personal hotspot disappeared after I upgraded my iphone 4s to iOS 8, how do I fix this?

After upgrading my iPhone 4s to iOS 8.0 the Personal Hotspot disappeared even after I upgraded again to iOS 8.0.2 its still not there. How do I fix this.

Hello there, george.
The following Knowledge Base article offers up some great steps for troubleshooting Personal Hotspot:
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/ts2756
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

RSS Feed Screensaver disappeared after Office upgrade

I have been using the RSS Feed Screensaver but it disappeared, along with other screen saver options, after I upgraded Office this week.
Does anyone know how to get it back?
Thanks,

If you go into System Preferences and under Personal there should be a link to Desktop & Screensaver. Under the Screensaver tab choose the RSS Visualizer screensaver. Then click on the Options button under the preview.
This is where you ensure that the RSS feed URL is correct so if anything is wrong you should be able to fix it here.

Context Menu disappeared after EP7 upgrade

Hi all,
We've recently upgraded our sandbox and dev portals to EP7. Since then, we've noticed that in KM, the context menus that should be located to the right of the files/folders is missing. Actually, it would be more appropriate to say that they're invisible rather than missing because if I hover my mouse over the area where it should be, the mouse pointer changes. If I click on this area, the menu comes up.
Has anyone seen this problem before? What do I need to do to fix it?
Thanks!
-Stephen Spalding
Web Developer
Graybar

Hi Stephen,
if you upgraded from EP6, please reimport old EP6 theme into EP7.
I and others had corrupted theme after the upgrade from EP6 to EP7.
The major bug is all web dynpros don't load ok.
Give this a try before modifying your theme.
Brad

Batch status disappearing after taking the UD (QA11)

Hi Experts,
We are facing the following issue (ECC6.0 EHP5 with no enhancement activated):
- when the UD is made for the IL created at GR from purchase order (origin 01), the batch status initially set at GR (Q) is cleared; same time the UD for the IL is recorded and kept correctly (UD has the new status)
- when this UD is changed for the same IL, the batch status is getting updated with the new status; the UD for the IL is correctly updated, too.
We have implemented the note 1687321, but the problem still persists.
Has anyone of you faced the similar problem? Any hints where to look for the root-cause?
I've checked the user exits for batch update and QA11 (based on forum posts), but they are not called at making UD or they have correct values.
Thanks for help,
/J

Hi FF,
I think we are on the same page with terminology
Indeed, our process is a bit "enhanced" I would say. When doing the GR from purchase order, the batch characteristic LOBM_UDCODE is pre-filled with the UD of "Q" (LEANQM1 Q) whereas the IL created upon packing of HUs has no UD.
Then, when user makes UD for this IL, the pre-filled UD on batch level should be changed to the UD user made. It is not and the value disappears. I've run some checks on the ABAP code and the issue seems to be caused by the VB_CHANGE_BATCH used in the MQEVAF40 in form charge_klassifizieren. When the initial UD is made (QA11), the internal table for this f-n module has only the new values the batch classification is to be updated with. When the UD change is made (QA12) - both new and old values are provided. If I change the internal table values to include old and new ones for the initial UD, the process works correctly (batch LOBM_UDCODE is updated with new value).
As we are upgrading to ECC6 EHP5, I've compared the flow to the ECC5 and the values provided to VB_CHANGE_BATCH at initial UD (QA11) are the same for both systems. The process works in ECC5. As result, we have created the OSS message.
In MSC3n changes to the batch characteristics are visible from change docs - and the log is kept for QA11 and QA12. For the removal of LOBM_UDCODE it displays "deleted" values, and for QA12 it shows "created" values. In other words - change logs are working correctly.
Once SAP responds to OSS message I will update this tread. Any ideas appreciated.
/J

ESX. Real Instruments in GB disappeared after Lion Upgrade

Hi:
After upgrading to Lion and Moutain Lion all of our 3rd party real instruments have disappeared in Garageband. They worked perfectly fine before the upgrade. I have tried re-installing, etc. And nothing. They are located in the appropriate folders in library/applications support/Garageband/iinstrument library, etc.
The still work in Logic, but have disappeared in Garageband.
Any ideas?
Quint
http://www.drumsondemand.com

I did get them to show up by opening an old project file with a missing instrument in it and when I click on that track, boom, all of the missing instruments showed up. But I wonder what the command is to get GB to "rescan" for the real instruments.

App disappeared after system upgrade

After a system upgrade one of my apps disappeared. How do I get it back?

Easiest thing is to load your backup
Beyond that a lot more information is needed and it may be difficult and/or expensive - which is of cousre why you always have a backup and especially before doing any upgrades or updates - if you do not you are 100% guarenteed to lose your photos and other files sooner or later
LN

Trip Number gets disappeared after clicking the UWL work item

Hi All,
When i click on work item in UWL to make a decision on it, a pop up gets opened trip form(there is error on trip formu201D Error while initiating travel form") . When i close this popup & return to UWL , trip number of that item gets disappeared.
Similarly when i launch UWL , some trip numbers do not appeared.
Please help.
Regards,
Amit S

Hi Piyush,
Thanks for replying.
I already tried it. it is not useful . following is XML file for tsk TS20000118. I think there is problem inside code.since i am not able to locate Action & view in Content folder. Please see the bold texts.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd'
>
<UWLConfiguration version="1.0">
<ItemTypes>
    <ItemType name="uwl.task.webflow.decision.TS20000118" connector="WebFlowConnector" defaultView="com.sap.pct.erp.mss.tra.view.RequestApprovalView" defaultAction="com.sap.pct.erp.mss.tra.action.DisplayRequestForm" executionMode="default">
      <ItemTypeCriteria externalType="TS20000118" connector="WebFlowConnector"/>
      <CustomAttributes>
        <CustomAttributeSource id="WEBFLOW_CONTAINER" objectIdHolder="externalId" objectType="WebflowContainer" cacheValidity="final">
          <Attribute name="TripNumber" type="string" displayName="Trip Number"/>
          <Attribute name="EmployeeNumber" type="string" displayName="Employee Number"/>
        </CustomAttributeSource>
      </CustomAttributes>
      <Actions>
        <Action name="com.sap.pct.erp.mss.tra.action.DisplayRequestForm" groupAction="" handler="SAPAppLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="toolbar=no,menubar=no">
          <Properties>
            <Property name="SAPIntegrator" value="ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.roles/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_travel_expenses/com.sap.pct.erp.ess.tripform"/>
            <Property name="sap.xss.tra.TripComponent" value="R"/>
            <Property name="sap.xss.tra.PersNo" value="${item.EmployeeNumber}"/>
            <Property name="display_order_priority" value="10"/>
            <Property name="sap.xss.tra.TripNo" value="${item.TripNumber}"/>
          </Properties>
          <Descriptions default="com.sap.pct.erp.mss.tra.action.DisplayRequestForm"/>
        </Action>
      </Actions>
    </ItemType>
</ItemTypes>
<Views>
    <View name="com.sap.pct.erp.mss.tra.view.PlanApprovalView" selectionMode="SINGLESELECT" width="98%" supportedItemTypes="uwl.task.webflow.decision.TS01000124" columnOrder="TripNumber, statusIcon, subject, priority, creatorId, createdDate, dueDate, processor, forwardedDate, attachmentCount, detailIcon, APPROVE, REJECT, SENDBACK" sortby="priority:descend, dueDate:ascend, createdDate:descend" tableDesign="STANDARD" visibleRowCount="10" headerVisible="yes" queryRange="undefined" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" refresh="300" dueDateSevere="0" dueDateWarning="0" emphasizedItems="none" displayOnlyDefinedAttributes="yes" dynamicCreationAllowed="yes" actionPosition="bottom" referenceBundle="com.sap.pct.erp.mss.tra.PlanApproval">
      <DisplayAttributes>
        <DisplayAttribute name="REJECT" type="checkbox" width="" sortable="no" format="default" actionRef="com.sap.pct.erp.mss.tra.action.approver.RejectPlan" referenceBundle="com.sap.pct.erp.mss.tra.Reject" hAlign="CENTER" vAlign="MIDDLE" maxTextWidth="0" headerVisible="yes"/>
        <DisplayAttribute name="SENDBACK" type="checkbox" width="" sortable="no" format="default" actionRef="com.sap.pct.erp.mss.tra.action.approver.SendBackPlan" referenceBundle="com.sap.pct.erp.mss.tra.SendBack" hAlign="CENTER" vAlign="MIDDLE" maxTextWidth="0" headerVisible="yes"/>
        <DisplayAttribute name="APPROVE" type="checkbox" width="" sortable="no" format="default" actionRef="com.sap.pct.erp.mss.tra.action.approver.ApprovePlan" referenceBundle="com.sap.pct.erp.mss.tra.Approve" hAlign="CENTER" vAlign="MIDDLE" maxTextWidth="0" headerVisible="yes"/>
        <DisplayAttribute name="TripNumber" type="string" width="" sortable="yes" format="default" referenceBundle="com.sap.pct.erp.mss.tra.TripNumber" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
      </DisplayAttributes>
      <Actions>
        <Action name="com.sap.pct.erp.mss.tra.action.approver.ApprovePlan" groupAction="yes" handler="UserDecisionHandler" referenceBundle="com.sap.pct.erp.mss.tra.Approve" returnToDetailViewAllowed="no" launchInNewWindow="no">
          <Properties>
            <Property name="decisionKey" value="0001"/>
          </Properties>
        </Action>
        <Action name="com.sap.pct.erp.mss.tra.action.approver.SendBackPlan" groupAction="yes" handler="UserDecisionHandler" referenceBundle="com.sap.pct.erp.mss.tra.SendBack" returnToDetailViewAllowed="no" launchInNewWindow="no">
          <Properties>
            <Property name="UserDecisionNote" value="true"/>
            <Property name="decisionKey" value="0002"/>
          </Properties>
        </Action>
        <Action name="com.sap.pct.erp.mss.tra.action.approver.RejectPlan" groupAction="yes" handler="UserDecisionHandler" referenceBundle="com.sap.pct.erp.mss.tra.Reject" returnToDetailViewAllowed="no" launchInNewWindow="no">
          <Properties>
            <Property name="UserDecisionNote" value="true"/>
            <Property name="decisionKey" value="0003"/>
          </Properties>
        </Action>
        <Action reference="submitUserDecisions"/>
        <Action reference="com.sap.pct.erp.mss.gotoWorkcenter"/>
        <Action reference="refresh"/>
        <Action reference="defaultGlobalWizard"/>
        <Action reference="addToNavigation"/>
        <Action reference="removeFromNavigation"/>
      </Actions>
    </View>
    <View name="com.sap.pct.erp.mss.tra.view.RequestApprovalView" selectionMode="SINGLESELECT" width="98%" supportedItemTypes="uwl.task.webflow.decision.TS20000118" columnOrder="TripNumber, statusIcon, subject, priority, creatorId, createdDate, dueDate, processor, forwardedDate, attachmentCount, detailIcon, APPROVE, REJECT, SENDBACK" sortby="priority:descend, dueDate:ascend, createdDate:descend" tableDesign="STANDARD" visibleRowCount="10" headerVisible="yes" queryRange="undefined" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" refresh="300" dueDateSevere="0" dueDateWarning="0" emphasizedItems="none" displayOnlyDefinedAttributes="yes" dynamicCreationAllowed="yes" actionPosition="bottom" referenceBundle="com.sap.pct.erp.mss.tra.RequestApproval">
      <DisplayAttributes>
        <DisplayAttribute name="REJECT" type="checkbox" width="" sortable="no" format="default" actionRef="com.sap.pct.erp.mss.tra.action.approver.RejectRequest" referenceBundle="com.sap.pct.erp.mss.tra.Reject" hAlign="CENTER" vAlign="MIDDLE" maxTextWidth="0" headerVisible="yes"/>
        <DisplayAttribute name="SENDBACK" type="checkbox" width="" sortable="no" format="default" actionRef="com.sap.pct.erp.mss.tra.action.approver.SendBackRequest" referenceBundle="com.sap.pct.erp.mss.tra.SendBack" hAlign="CENTER" vAlign="MIDDLE" maxTextWidth="0" headerVisible="yes"/>
        <DisplayAttribute name="APPROVE" type="checkbox" width="" sortable="no" format="default" actionRef="com.sap.pct.erp.mss.tra.action.approver.ApproveRequest" referenceBundle="com.sap.pct.erp.mss.tra.Approve" hAlign="CENTER" vAlign="MIDDLE" maxTextWidth="0" headerVisible="yes"/>
        <DisplayAttribute name="TripNumber" type="string" width="" sortable="yes" format="default" referenceBundle="com.sap.pct.erp.mss.tra.TripNumber" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
      </DisplayAttributes>
      <Actions>
        <Action name="com.sap.pct.erp.mss.tra.action.approver.ApproveRequest" groupAction="yes" handler="UserDecisionHandler" referenceBundle="com.sap.pct.erp.mss.tra.Approve" returnToDetailViewAllowed="no" launchInNewWindow="no">
          <Properties>
            <Property name="decisionKey" value="0001"/>
          </Properties>
        </Action>
        <Action name="com.sap.pct.erp.mss.tra.action.approver.SendBackRequest" groupAction="yes" handler="UserDecisionHandler" referenceBundle="com.sap.pct.erp.mss.tra.SendBack" returnToDetailViewAllowed="no" launchInNewWindow="no">
          <Properties>
            <Property name="UserDecisionNote" value="true"/>
            <Property name="decisionKey" value="0002"/>
          </Properties>
        </Action>
        <Action name="com.sap.pct.erp.mss.tra.action.approver.RejectRequest" groupAction="yes" handler="UserDecisionHandler" referenceBundle="com.sap.pct.erp.mss.tra.Reject" returnToDetailViewAllowed="no" launchInNewWindow="no">
          <Properties>
            <Property name="UserDecisionNote" value="true"/>
            <Property name="decisionKey" value="0003"/>
          </Properties>
        </Action>
        <Action reference="submitUserDecisions"/>
        <Action reference="com.sap.pct.erp.mss.gotoWorkcenter"/>
        <Action reference="refresh"/>
        <Action reference="defaultGlobalWizard"/>
        <Action reference="addToNavigation"/>
        <Action reference="removeFromNavigation"/>
      </Actions>
    </View>
    <View name="com.sap.pct.erp.mss.tra.view.TravelApproverWOC" selectionMode="SINGLESELECT" width="98%" supportedItemTypes="uwl.task.webflow.decision.TS20000131, uwl.task.webflow.decision.TS01000124, uwl.task.webflow.decision.TS20000118, uwl.task.webflow.decision.TS20000135" columnOrder="TripNumber, statusIcon, subject, dueDate, priority, creatorId, createdDate, processor, forwardedDate, attachmentCount, detailIcon" sortby="priority:descend, dueDate:ascend, createdDate:descend" tableDesign="STANDARD" visibleRowCount="10" headerVisible="yes" queryRange="undefined" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" refresh="300" dueDateSevere="0" dueDateWarning="0" emphasizedItems="none" displayOnlyDefinedAttributes="yes" dynamicCreationAllowed="yes" actionPosition="top" referenceBundle="com.sap.pct.erp.mss.tra.Travel">
      <DisplayAttributes>
        <DisplayAttribute name="TripNumber" type="string" width="" sortable="yes" format="default" referenceBundle="com.sap.pct.erp.mss.tra.TripNumber" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
      </DisplayAttributes>
      <Actions>
        <Action reference="refresh"/>
        <Action reference="defaultGlobalWizard"/>
        <Action reference="addToNavigation"/>
        <Action reference="removeFromNavigation"/>
        <Action name="viewDetail" groupAction="" handler="uwlExcludeAction" returnToDetailViewAllowed="yes" launchInNewWindow="no">
          <Descriptions default="viewDetail"/>
        </Action>
        <Action reference="com.sap.pct.erp.mss.gotoWorkcenter"/>
      </Actions>
    </View>
    <View name="com.sap.pct.erp.mss.tra.view.TripApprovalView" selectionMode="SINGLESELECT" width="98%" supportedItemTypes="uwl.task.webflow.decision.TS20000131" columnOrder="TripNumber, statusIcon, subject, priority, creatorId, createdDate, dueDate, processor, forwardedDate, attachmentCount, detailIcon, APPROVE, REJECT, SENDBACK" sortby="priority:descend, dueDate:ascend, createdDate:descend" tableDesign="STANDARD" visibleRowCount="10" headerVisible="yes" queryRange="undefined" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" refresh="300" dueDateSevere="0" dueDateWarning="0" emphasizedItems="none" displayOnlyDefinedAttributes="yes" dynamicCreationAllowed="yes" actionPosition="bottom" referenceBundle="com.sap.pct.erp.mss.tra.TripApproval">
      <DisplayAttributes>
        <DisplayAttribute name="REJECT" type="checkbox" width="" sortable="no" format="default" actionRef="com.sap.pct.erp.mss.tra.action.approver.RejectTrip" referenceBundle="com.sap.pct.erp.mss.tra.Reject" hAlign="CENTER" vAlign="MIDDLE" maxTextWidth="0" headerVisible="yes"/>
        <DisplayAttribute name="SENDBACK" type="checkbox" width="" sortable="no" format="default" actionRef="com.sap.pct.erp.mss.tra.action.approver.SendBackTrip" referenceBundle="com.sap.pct.erp.mss.tra.SendBack" hAlign="CENTER" vAlign="MIDDLE" maxTextWidth="0" headerVisible="yes"/>
        <DisplayAttribute name="APPROVE" type="checkbox" width="" sortable="no" format="default" actionRef="com.sap.pct.erp.mss.tra.action.approver.ApproveTrip" referenceBundle="com.sap.pct.erp.mss.tra.Approve" hAlign="CENTER" vAlign="MIDDLE" maxTextWidth="0" headerVisible="yes"/>
        <DisplayAttribute name="TripNumber" type="string" width="" sortable="yes" format="default" referenceBundle="com.sap.pct.erp.mss.tra.TripNumber" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
      </DisplayAttributes>
      <Actions>
        <Action name="com.sap.pct.erp.mss.tra.action.approver.ApproveTrip" groupAction="yes" handler="UserDecisionHandler" referenceBundle="com.sap.pct.erp.mss.tra.Approve" returnToDetailViewAllowed="no" launchInNewWindow="no">
          <Properties>
            <Property name="decisionKey" value="0001"/>
          </Properties>
        </Action>
        <Action name="com.sap.pct.erp.mss.tra.action.approver.SendBackTrip" groupAction="yes" handler="UserDecisionHandler" referenceBundle="com.sap.pct.erp.mss.tra.SendBack" returnToDetailViewAllowed="no" launchInNewWindow="no">
          <Properties>
            <Property name="UserDecisionNote" value="true"/>
            <Property name="decisionKey" value="0002"/>
          </Properties>
        </Action>
        <Action name="com.sap.pct.erp.mss.tra.action.approver.RejectTrip" groupAction="yes" handler="UserDecisionHandler" referenceBundle="com.sap.pct.erp.mss.tra.Reject" returnToDetailViewAllowed="no" launchInNewWindow="no">
          <Properties>
            <Property name="UserDecisionNote" value="true"/>
            <Property name="decisionKey" value="0003"/>
          </Properties>
        </Action>
        <Action reference="submitUserDecisions"/>
        <Action reference="com.sap.pct.erp.mss.gotoWorkcenter"/>
        <Action reference="refresh"/>
        <Action reference="defaultGlobalWizard"/>
        <Action reference="addToNavigation"/>
Regards,
Amit

Why do character styles disappear after an upgrade to RH9? And more...

I am trying out version 3 of the technical communication suite and have developed a few concerns about RoboHelp 9. I'm wondering if anyone has feedback on the following:
After opening a version 7 project in RoboHelp 9, I noticed that all of my custom character styles are gone. They are not listed in the "style" pane (when the drop-down is set to either "Character Styles" or "Paragraph and Character Styles"), and the text itself does not look correct. Has anyone experienced anything like this? I checked the RH9 release notes, and the three known issues listed have nothing to do with character styles.
On a broader note, I read elsewhere in this forum that upgrading from RH version 7 to either 8 or 9 can be painful. Does anyone know whether Adobe (or anyone else) has a list of upgrade warnings, or a list of proposed solutions for making the upgrade process go more smoothly? I'm not seeing anything in the official Adobe documentation, though I could be missing it.
Also, if anyone has an opinion on whether the FrameMaker-RoboHelp integration is better in version 3 of technical communications suite (compared with version 1, which is I am), I would be interested in hearing your reactions. After a first pass, the only part of the version 3 suite I'm really impressed with is the new Acrobat.
thanks,
Abby

If you would like to create a new project and set up a topic with your CSS in it, I will take a look at it. How to send it is described on the Contact page on my site.
The most common issue with upgrading to 8 was lists. You can read about that on my site. Look under RoboHelp > Lists.
With 8 the big issue was a bug that will not affect you in 9. The project lost track of files.
I cannot help you on the FM integration and suggest you post a separate question on that aspect at http://forums.adobe.com/community/robohelp/robohelp_framemaker
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Gmail disappeared after mavericks upgrade

Hi all,
I know there's been a few problems with gmail after upgrading to mavericks. I have a slightly different problem. all my gmail messages prior to 23rd Oct have disappeared. All the folder they were stored in are now empty. I checked on Gmail via Google and they have gone from there as well.
Anyone got any thoughts?

HELP PLEASE
"Some of your projects refer to media that is not available. There are files missing from your existing iMovie projects and events that cannot be restored on update.”
I backed up the folders with clips and pics as long with the iMovie Project created in iMovie 8 onto an external memory drive because I purchased a new Mac.
Now, Im trying to run that project under my new Macbook pro, maverick 10.9, iMovie version 10.0.1 with no luck.
I tried: deleting the files named “UpdatedToiMovie10” in the imovie folders (events / projects) and doing Files: "Update projects and events” in the new imovie version, with no luck. the message
"Some of your projects refer to media that is not available. There are files missing from your existing iMovie projects and events that cannot be restored on update.” keeps popping.
I also tried to import all the folders in the external drive to iPhoto. evrything, pics and clips too. No luck when Uptading
PLEASE I need help, that movie is for work. Im in so much trouble. Is there any way to recover that project so I can finalise it and burn it?
Thank you in advance mac-ers!

YouTube icon and app disappeared after recent upgrade

I recently did an upgrade and afterward my YouTube icon and app disappeared. I just want it back! I went to the App Store and can't even find just plain ol' YouTube. How can I get it back?

The YouTube app is not included in iOS 6. You will either need to try one of the YouTube apps from the store (there is an iPhone optimised app from google, and other people have said that they are working on an iPad version), or try accessing the mobile version via Safari : http://m.youtube.com (you can create a home screen shortcut for the site)

SAP Trip Processing Status disappeared after EP6U Upgrade

Similar Messages

Maybe you are looking for