SAP TV - I do not get to transfer to FI
Hi,
I am having a problem about SAP TV:
I do a travel request but I have no Special GL Accounting to the Vendor.
I think that is because this status:
Status actual - Request entered/ To be Settd
Trip Completed/ To be Settd.
If I get to change to:
Status - Request entered/ Transferred to FI
Trip Completed/ Transferred to FI.
Maybe I will have the Special Gl Accounting to the vendor, Correct ???
but what do I need to get it ??. Please, I have ever tried a lot of things but I do not know how to do it.
Best regards
I've got a solution for this question.
thanks,
Edited by: Ailton Fabricio Dias on Aug 5, 2010 3:43 PM
Similar Messages
-
SAP Fiori Purchase Order not getting any data & getting a 404 Error Message
Hi
I have downloaded Purchase Order SAPUI5 code from SAP Fiori server. import it into Eclipse then try to run that Apps/code(SAPUI5) from browser.
1) Not getting any Data.
2) It show 404 Error Message.
3) Its show wrong User Name as LoginHi Pankaj,
First question :
Are you able to get the data in Fiori ?
Secondly,
You have mentioned as Purchase order, but here you have given snapshot of Purchase requisition app, and you are calling also purchase req app from the browser. Please clarify
If you have mistakenly written PO : If you are still not getting data for Approve Purc req, then check if your RFC connections are proper from Gateway to backend and backend to Gateway.
If RFC is working fine, check the Remote logon, it should be marked as Current user. If its not marked as current user, then it will show some other user.
Regards,
Tejas -
SAP BUS2012 Rejection Stop not getting triggered
Hi experts,
I am facing one particular problem. When I am rejecting a PO, by default , REJECTION_START event of BUS2012 is getting triggered, I can see it in SWEL. But when I am cancelling the Rejection REJECTION_STOP event of BUS2012 is not getting triggered. Its not even coming in SWEL(Event trace).What could be the reason as every thing is standard, no custom work.Hi,
That's strange. Where did you get this idea that this event should be created? (Well, I can see it also in SAP documentation.) And are you sure you are doing the rejection cancellation correctly (well, I don't know how many ways there could possibly be..) - the status of PO is changed, etc.?
SWETYPV should not have anything to do with this problem. The event is either created or not. SWETYPV is about how to react to events after they are created.
Are you sure that there is no filter set up in SWELS for the events. Perhaps the event is created but you cannot see it in SWEL due to a filter.
Regards,
Karri -
After EHP6 upgrade in SAP ECC6.0 Stocke not get updated in MMBE after Partial UD
Hello Experts,
Recently we have upgraded our system to EHP6 on ECC 6.0 facing issue in MMBE. We have given Partial UD. after partial UD, some stock suppose to move in Blocked stock as per UD code customization. surprisingly stock not moved to Blocked stock. same is updating through Mb1b transaction.
Thanks in Advance !Hi,
Check what have you maintained in QM inventory posting in Configuration.
Follow the path: QCC0> Quality Inspection> Inspection lot completion> Define inventory posting.
Movement type 350 should be maintained against VMENGE04 in Q Stock.
ntn -
Not getting Selection(Prompt) option for the WebI Query.
Hello Experts,
I built WebI query for the custom query of SAP BI.I am not getting an selection or prompt for the WebI Query even though there is a selection in BI Query.If i develop WebI report for the standard query of the Bex i am getting selction options.
Please suggest how can i do this.
Thanks in Advance,
Shiva Kumar G.CHi Shiva,
Where in the Query Designer are the selections defined?
Selections defined under Characteristic Restrictions should show up when you run the webi report.
Additional selections created under Default Values won't show running a webi report (that is just an additional filter on the data retrieved from the data warehouse).
Regards,
Harry -
Hi Friends,
We have one development system on windows platform database is Oracle 9i.
When we are going to startsap from MMC it is getting started and after 2 minutes
disp+work getting stopped.
In trans.log also i am unable to see any error. schema is correct and nothing show in trans.log.
But in syslog it is whowing error
RSPO versus DD mismatch TSP01-RQO1NAME leng
Spooler failed return code 0001 and temse failed return code 0001
When iam gooing to that particular table TSP01 i saw so many spool requests was stored in that.
Can you suggest me in this case if i need to delete those entries from TSP01.
Sorry for not posting logs as i did not get any error message in logs.
And R3trans -d and -x is giving 0000 no issue in connecting database.
And With suggetions from SAP people i have applied latest kernel...But same issue is there.
And please find the dev_disp trace below..
trc file: "dev_disp", trc level: 1, release: "640"
Thu Dec 11 14:20:26 2008
kernel runs with dp version 133(ext=102) (@(#) DPLIB-INT-VERSION-133)
length of sys_adm_ext is 312 bytes
sysno 00
sid PAD
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 155
intno 20020600
make: multithreaded, ASCII
pid 3212
***LOG Q00=> DpSapEnvInit, DPStart (00 3212) http://dpxxdisp.c 1100
shared lib "dw_xml.dll" version 155 successfully loaded
shared lib "dw_xtc.dll" version 155 successfully loaded
shared lib "dw_stl.dll" version 155 successfully loaded
shared lib "dw_gui.dll" version 155 successfully loaded
shared lib "dw_mdm.dll" version 155 successfully loaded
Thu Dec 11 14:20:32 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings http://dpxxtool2.c 3896
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >ndelntx5_PAD_00 <
DpShMCreate: sizeof(wp_adm) 14904 (828)
DpShMCreate: sizeof(tm_adm) 2379840 (11840)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 768000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (364)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 04AA0040, size: 3249736)
DpShMCreate: allocated sys_adm at 04AA0040
DpShMCreate: allocated wp_adm at 04AA17D8
DpShMCreate: allocated tm_adm_list at 04AA5210
DpShMCreate: allocated tm_adm at 04AA5238
DpShMCreate: allocated wp_ca_adm at 04CEA278
DpShMCreate: allocated appc_ca_adm at 04CEE8C8
DpShMCreate: allocated comm_adm_list at 04CF0038
DpShMCreate: allocated comm_adm at 04CF0050
DpShMCreate: allocated vmc_adm_list at 04DAB850
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 04DAB878
DpShMCreate: allocated wall_adm at 04DAB880
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 249 blocks reserved for free list.
ES initialized.
Thu Dec 11 14:20:35 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( ndelntx5) http://dpxxdisp.c 10036
Thu Dec 11 14:20:36 2008
DpStartStopMsg: send start message (myname is >ndelntx5_PAD_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet http://dpxxmbuf.c 1025
DpMsgAdmin: Set patchno for this platform to 155
Release check o.K.
Thu Dec 11 14:21:36 2008
ERROR => W8 (pid 3344) died http://dpxxdisp.c 12562
ERROR => W9 (pid 3352) died http://dpxxdisp.c 12562
ERROR => W10 (pid 3360) died http://dpxxdisp.c 12562
ERROR => W11 (pid 3368) died http://dpxxdisp.c 12562
my types changed after wp death/restart 0xbf --> 0xbd
ERROR => W14 (pid 3388) died http://dpxxdisp.c 12562
ERROR => W17 (pid 3412) died http://dpxxdisp.c 12562
my types changed after wp death/restart 0xbd --> 0x9d
Thu Dec 11 14:21:56 2008
ERROR => W0 (pid 3280) died http://dpxxdisp.c 12562
ERROR => W1 (pid 3288) died http://dpxxdisp.c 12562
ERROR => W2 (pid 3296) died http://dpxxdisp.c 12562
ERROR => W3 (pid 3304) died http://dpxxdisp.c 12562
ERROR => W4 (pid 3312) died http://dpxxdisp.c 12562
ERROR => W5 (pid 3320) died http://dpxxdisp.c 12562
ERROR => W6 (pid 3328) died http://dpxxdisp.c 12562
ERROR => W7 (pid 3336) died http://dpxxdisp.c 12562
my types changed after wp death/restart 0x9d --> 0x9c
ERROR => W12 (pid 3376) died http://dpxxdisp.c 12562
my types changed after wp death/restart 0x9c --> 0x98
ERROR => W13 (pid 3380) died http://dpxxdisp.c 12562
ERROR => W15 (pid 3396) died http://dpxxdisp.c 12562
my types changed after wp death/restart 0x98 --> 0x90
ERROR => W16 (pid 3404) died http://dpxxdisp.c 12562
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3280 (SIGUSR2)
ERROR => DpWpKill(3280, SIGUSR2) failed http://dpxxtool.c 2507
killing W1-3288 (SIGUSR2)
ERROR => DpWpKill(3288, SIGUSR2) failed http://dpxxtool.c 2507
killing W2-3296 (SIGUSR2)
ERROR => DpWpKill(3296, SIGUSR2) failed http://dpxxtool.c 2507
killing W3-3304 (SIGUSR2)
ERROR => DpWpKill(3304, SIGUSR2) failed http://dpxxtool.c 2507
killing W4-3312 (SIGUSR2)
ERROR => DpWpKill(3312, SIGUSR2) failed http://dpxxtool.c 2507
killing W5-3320 (SIGUSR2)
ERROR => DpWpKill(3320, SIGUSR2) failed http://dpxxtool.c 2507
killing W6-3328 (SIGUSR2)
ERROR => DpWpKill(3328, SIGUSR2) failed http://dpxxtool.c 2507
killing W7-3336 (SIGUSR2)
ERROR => DpWpKill(3336, SIGUSR2) failed http://dpxxtool.c 2507
killing W8-3344 (SIGUSR2)
ERROR => DpWpKill(3344, SIGUSR2) failed http://dpxxtool.c 2507
killing W9-3352 (SIGUSR2)
ERROR => DpWpKill(3352, SIGUSR2) failed http://dpxxtool.c 2507
killing W10-3360 (SIGUSR2)
ERROR => DpWpKill(3360, SIGUSR2) failed http://dpxxtool.c 2507
killing W11-3368 (SIGUSR2)
ERROR => DpWpKill(3368, SIGUSR2) failed http://dpxxtool.c 2507
killing W12-3376 (SIGUSR2)
ERROR => DpWpKill(3376, SIGUSR2) failed http://dpxxtool.c 2507
killing W13-3380 (SIGUSR2)
ERROR => DpWpKill(3380, SIGUSR2) failed http://dpxxtool.c 2507
killing W14-3388 (SIGUSR2)
ERROR => DpWpKill(3388, SIGUSR2) failed http://dpxxtool.c 2507
killing W15-3396 (SIGUSR2)
ERROR => DpWpKill(3396, SIGUSR2) failed http://dpxxtool.c 2507
killing W16-3404 (SIGUSR2)
ERROR => DpWpKill(3404, SIGUSR2) failed http://dpxxtool.c 2507
killing W17-3412 (SIGUSR2)
ERROR => DpWpKill(3412, SIGUSR2) failed http://dpxxtool.c 2507
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:06 2008
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Thu Dec 11 08:52:06 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3280 Ended no 1 0 0
1 DIA 3288 Ended no 1 0 0
2 DIA 3296 Ended no 1 0 0
3 DIA 3304 Ended no 1 0 0
4 DIA 3312 Ended no 1 0 0
5 DIA 3320 Ended no 1 0 0
6 DIA 3328 Ended no 1 0 0
7 DIA 3336 Ended no 1 0 0
8 DIA 3344 Ended no 1 0 0
9 DIA 3352 Ended no 1 0 0
10 UPD 3360 Ended no 1 0 0
11 UPD 3368 Ended no 1 0 0
12 ENQ 3376 Ended no 1 0 0
13 BTC 3380 Ended no 1 0 0
14 BTC 3388 Ended no 1 0 0
15 BTC 3396 Ended no 1 0 0
16 SPO 3404 Ended no 1 0 0
17 UP2 3412 Ended no 1 0 0
Dispatcher Queue Statistics Thu Dec 11 08:52:06 2008
===========================
--------++++--
+
Typ now high max writes reads
--------++++--
+
NOWP 0 3 2000 10 10
--------++++--
+
DIA 6 6 2000 6 0
--------++++--
+
UPD 0 0 2000 0 0
--------++++--
+
ENQ 0 0 2000 0 0
--------++++--
+
BTC 0 0 2000 0 0
--------++++--
+
SPO 1 1 2000 1 0
--------++++--
+
UP2 0 0 2000 0 0
--------++++--
+
max_rq_id 15
wake_evt_udp_now 1
wake events total 11, udp 8 ( 72%), shm 3 ( 27%)
since last update total 11, udp 8 ( 72%), shm 3 ( 27%)
Dump of tm_adm structure: Thu Dec 11 08:52:06 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Dec 11 08:52:06 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id owner pid eyecatcher
--------++--
+
0 DISPATCHER -1 WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:11 2008
NiISelect: TIMEOUT occured (5000 ms)
DpHalt: shutdown server >ndelntx5_PAD_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (2564) (SOFT_KILL)
Stop icman
killing process (3272) (SOFT_KILL)
Terminate gui connections
DpProcDied Process lives (PID:2564 HANDLE:424)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:12 2008
NiISelect: TIMEOUT occured (1000 ms)
Thu Dec 11 14:22:13 2008
DpProcDied Process lives (PID:2564 HANDLE:424)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:14 2008
NiISelect: TIMEOUT occured (1000 ms)
DpProcDied Process died (PID:2564 HANDLE:424)
DpProcDied Process lives (PID:3272 HANDLE:420)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:15 2008
NiISelect: TIMEOUT occured (1000 ms)
DpProcDied Process lives (PID:3272 HANDLE:420)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:16 2008
NiISelect: TIMEOUT occured (1000 ms)
DpProcDied Process lives (PID:3272 HANDLE:420)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:17 2008
NiISelect: TIMEOUT occured (1000 ms)
DpProcDied Process lives (PID:3272 HANDLE:420)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:18 2008
NiISelect: TIMEOUT occured (1000 ms)
DpProcDied Process lives (PID:3272 HANDLE:420)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:19 2008
NiISelect: TIMEOUT occured (1000 ms)
DpProcDied Process lives (PID:3272 HANDLE:420)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:20 2008
NiISelect: TIMEOUT occured (1000 ms)
DpProcDied Process lives (PID:3272 HANDLE:420)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:21 2008
NiISelect: TIMEOUT occured (1000 ms)
DpProcDied Process lives (PID:3272 HANDLE:420)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:22 2008
NiISelect: TIMEOUT occured (1000 ms)
DpProcDied Process lives (PID:3272 HANDLE:420)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:23 2008
NiISelect: TIMEOUT occured (1000 ms)
DpProcDied Process died (PID:3272 HANDLE:420)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
DpStartStopMsg: send stop message (myname is >ndelntx5_PAD_00 <)
NiIMyHostName: hostname = 'ndelntx5'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiPRead: WSAEWOULDBLOCK 1.time 4
NiIPeek: peek for hdl 3 / socket 344 timed out (r; 0)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: write 114, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiPRead: WSAEWOULDBLOCK 1.time 4
NiIPeek: peek successful for hdl 3 / socket 344 (r)
NiIRead: read 114, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=114
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER, typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiPRead: WSAEWOULDBLOCK 1.time 4
Thu Dec 11 14:22:24 2008
NiIPeek: peek for hdl 3 / socket 344 timed out (r; 1000)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () http://dpxxdisp.c 10293
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/18
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 21)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 344
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 3212) http://dpxxdisp.c 8764
Good Bye .....
After diognosis of our system we came through one issue related to characterset.
One of our ABAPer chagned the characterset of R3TR DOMA CHAR20 and CHAR30 objects with accesskey.
These objects are related to data dictionary. Now when we are going to startsap it is showing that there is a mismatching in RSPO and DD.....Now the thing is can we revert back those objects with default values. And please note that our SAP system is still down and we cant change at GUI level. If is there any chance we can at database level itself. And one more thing....can we export those related tables from any other system...if yes plese let me know how it will possible?
Error is:
ERROR => TSP01-RQO1NAME : length 20 <-> 100. http://rspoini.c 533
S spool kernel/ddic check: Failed
S using table TSP02F for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S
Please suggest.......
Thanks in advance
Harish K ReddyHi all,
Please find the dev_W0 and dev_W8 logs below:
dev_w0:
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Thu Dec 11 16:20:35 2008
B create_con (con_name=R/3)
B Loading DB library 'J:\usr\sap\PAD\SYS\exe\run\dboraslib.dll' ...
B Library 'J:\usr\sap\PAD\SYS\exe\run\dboraslib.dll' loaded
B Version of 'J:\usr\sap\PAD\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.142)
B New connection 0 created
M sysno 00
M sid PAD
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 155
M intno 20020600
M make: multithreaded, ASCII
M pid 3368
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3368) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 14904 (828)
M DpShMCreate: sizeof(tm_adm) 2379840 (11840)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 768000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (364)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06BA0040, size: 3249736)
M DpShMCreate: allocated sys_adm at 06BA0040
M DpShMCreate: allocated wp_adm at 06BA17D8
M DpShMCreate: allocated tm_adm_list at 06BA5210
M DpShMCreate: allocated tm_adm at 06BA5238
M DpShMCreate: allocated wp_ca_adm at 06DEA278
M DpShMCreate: allocated appc_ca_adm at 06DEE8C8
M DpShMCreate: allocated comm_adm_list at 06DF0038
M DpShMCreate: allocated comm_adm at 06DF0050
M DpShMCreate: allocated vmc_adm_list at 06EAB850
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06EAB878
M DpShMCreate: allocated wall_adm at 06EAB880
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Dec 11 16:20:37 2008
M calling db_connect ...
C Prepending I:\oracle\PAD\920 to Path.
C got NLS_LANG='AMERICAN_AMERICA.WE8DEC' from environment
C
C Thu Dec 11 16:20:40 2008
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPPAD's password
C Connecting as /@PAD on connection 0 (nls_hdl 0) ... (dbsl 640 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 WE8DEC 1 04B81028 0938B2A8 0938AD10
C Attaching to DB Server PAD (con_hdl=0,svchp=0938AC64,svrhp=04B85664)
C
C Thu Dec 11 16:20:41 2008
C Starting user session (con_hdl=0,svchp=0938AC64,srvhp=04B85664,usrhp=04B8E274)
C Now '/@PAD' is connected (con_hdl 0, nls_hdl 0).
C Got SAPPAD's password from OPS$-user
C Disconnecting from connection 0 ...
C Close user session (con_hdl=0,svchp=0938AC64,usrhp=04B8E274)
C Now I'm disconnected from ORACLE
C Connecting as SAPPAD/<pwd>@PAD on connection 0 (nls_hdl 0) ... (dbsl 640 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 WE8DEC 1 04B81028 0938B2A8 0938AD10
C Starting user session (con_hdl=0,svchp=0938AC64,srvhp=04B85664,usrhp=04B8E274)
C Now 'SAPPAD/<pwd>@PAD' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.WE8DEC
C Database instance pad is running on NDELNTX5 with ORACLE version 9.2.0.8.0 since 20081211
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20081211 162037 NDELNTX5
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Thu Dec 11 16:20:42 2008
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 09650040, size: 20000768)
M SHM_ROLL_AREA (addr: 33B70040, size: 123731968)
M SHM_PAGING_AREA (addr: 0A970040, size: 39845888)
M SHM_ROLL_ADM (addr: 0CF80040, size: 1236040)
M SHM_PAGING_ADM (addr: 0D0B0040, size: 525344)
M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 0D140040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7424 bytes (50 server) at 003F0040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B
B Thu Dec 11 16:20:43 2008
B db_con_shm_ini: WP_ID = 0, WP_CNT = 18, CON_ID = -1
B
B Thu Dec 11 16:20:44 2008
B dbtbxbuf: Buffer TABL (addr: 11C200C8, size: 50000896, end: 14BCF4C8)
B dbtbxbuf: Profile: max_objects = 10000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 24043008
B ***LOG BB0=> buffer TABL started with length 50000896 bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
B dbtbxbuf: Buffer TABLP (addr: 14BD00C8, size: 30720000, end: 1691C0C8)
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 15306240
B ***LOG BB0=> buffer TABLP started with length 30720000 bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: 0 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 288 = 288
B 2: 18 * 20 = 360
B 3: 4001 * 40 = 160040
B 4: 2000 * 136 = 272000
B 5: 4001 * 4 = 16004
B 6: 1 * 200 = 200
B 7: 65 * 4 = 260
B 8: 29258 * 128 = 3745024
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: 0FA800D0, size: 4194304, end: 0FE800D0)
B ***LOG BB0=> buffer EIBUF started with length 4096k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of ESM buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 288 = 288
B 2: 18 * 20 = 360
B 3: 4001 * 40 = 160040
B 4: 2000 * 136 = 272000
B 5: 4001 * 4 = 16004
B 6: 1 * 200 = 200
B 7: 65 * 4 = 260
B 8: 29258 * 128 = 3745024
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer ESM (addr: 169200D0, size: 4194304, end: 16D200D0)
B ***LOG BB0=> buffer ESM started with length 4096k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of CUA buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 288 = 288
B 2: 18 * 20 = 360
B 3: 5003 * 40 = 200120
B 4: 2500 * 136 = 340000
B 5: 5003 * 4 = 20012
B 6: 1 * 200 = 200
B 7: 193 * 4 = 772
B 8: 17805 * 256 = 4558080
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer CUA (addr: 16D300D0, size: 5120000, end: 172120D0)
B ***LOG BB0=> buffer CUA started with length 5000k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B
B Thu Dec 11 16:20:45 2008
B Layout of OTR buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 288 = 288
B 2: 18 * 20 = 360
B 3: 4001 * 40 = 160040
B 4: 2000 * 136 = 272000
B 5: 4001 * 4 = 16004
B 6: 1 * 200 = 200
B 7: 81 * 4 = 324
B 8: 29258 * 128 = 3745024
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer OTR (addr: 172200D0, size: 4194304, end: 176200D0)
B ***LOG BB0=> buffer OTR started with length 4096k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B ***LOG BB0=> buffer CALE started with length 500000 bytes [dbcalbuf#2 @ 2212] [dbcalbuf2212 ]
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:640.00]):
B max_blocking_factor = 5, max_in_blocking_factor = 5,
B min_blocking_factor = 5, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding =SBCS / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
M
M Thu Dec 11 16:20:46 2008
M PfHIndInitialize: memory=<0D20CCC0>, header=<0D20CCC0>, records=<0D20CCF0>
M SecAudit(RsauInit): Start init of Security Audit Log for first wp.
M SecAudit(RsauCreateShm): New block for Security Audit Log allocated in SCSA
M SecAudit(RsauCreateShm): SCSA memory usage: SecAudit = 992, total = 2096
M SecAudit(RsauShmInit): SCSA size................ = 4096
M SecAudit(RsauShmInit): addr of SCSA............. = 00230040
M SecAudit(RsauShmInit): addr of RSAUSHM.......... = 00230490
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = 002304C8
M SecAudit(RsauShmInit): addr of RSAUSLOTS........ = 002304D4
M SecAudit(RsauShmInit): SHM version.............. = 5
M SecAudit(RsauShmInit): SHM Slot version......... = 2
M SecAudit(RsauShmInit): RSAU active.............. = 0
M SecAudit(RsauShmInit): number of slots possible. = 10
M SecAudit(RsauShmInit): number of slots requested = 2
M SecAudit(RsauShmInit): number of slots used..... = 2
M SecAudit(RsauShmInit): user selection........... = 0
M SecAudit(RsauShmInit): max size of one file..... = 0 KB
M SecAudit(RsauShmInit): max size of all files.... = 102400 KB
M SecAudit(RsauGetCurrentProfile): Init of shared memory completed
M SecAudit(RsauGetCurrentProfile): Security Audit Log not active
M SsfSapSecin: automatic application server initialization for SAPSECULIB
N SsfSapSecin: Looking for PSE in database
N SsfPseLoad: started...(path=J:\usr\sap\PAD\DVEBMGS00\sec, AS=ndelntx5, instanceid=00)
N SsfPseLoad: Downloading file J:\usr\sap\PAD\DVEBMGS00\sec\SAPSYS.pse (client: , key: SYSPSE, len: 1579)
N SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
N MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
N MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M CCMS: AlMsUpload called by wp 0.
M
M Thu Dec 11 16:20:52 2008
M CCMS: AlMsUpload successful for J:\usr\sap\PAD\DVEBMGS00\log\ALMTTREE.DAT (2219 MTEs).
M
M Thu Dec 11 16:20:56 2008
M ***LOG R19=> tskh_init, rstsi1_init1 ( Temse 000001) [thxxhead.c 1577]
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 095128C0
S *** ERROR => TSP01-RQO1NAME : length 20 <-> 100. [rspoini.c 533]
S spool kernel/ddic check: Failed
S using table TSP02F for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S
S Thu Dec 11 16:20:57 2008
S found processing queue enabled
S size of spec char cache entry: 165020 bytes (timeout 100 sec)
S size of open spool request entry: 1152 bytes
S immediate print option for implicitely closed spool requests is disabled
M ***LOG R19=> tskh_init, rspoi_init ( Spooler 000001) [thxxhead.c 1628]
M *** ERROR => -
============----
[thxxhead.c 849]
M *** ERROR => RSPO - Error [thxxhead.c 849]
M *** ERROR => code: 1 RSPOEINTERN Some other internal error [thxxhead.c 849]
M *** ERROR => TSP01-RQO1NAME : length 20 <-> 100. [thxxhead.c 849]
M *** ERROR => module: rspoini no: 1 line: 535 T100: PO001 [thxxhead.c 849]
M *** ERROR => TSL01: F8T p3: TSP01-RQO1NAME : length 20 <-> 100. [thxxhead.c 849]
M *** ERROR => -
[thxxhead.c 849]
M *** ERROR => | No entry in error history | [thxxhead.c 849]
M *** ERROR => -
[thxxhead.c 849]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: rspoi_init (step 1, th_errno 2, action 3, level 1) [thxxhead.c 9598]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ndelntx5_PAD_00 on host ndelntx5 (wp 0)
M * ERROR tskh_init: rspoi_init
M *
M * TIME Thu Dec 11 16:20:57 2008
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 2
M * MODULE thxxhead.c
M * LINE 9783
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 254]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3368) [dpnttool.c 357]
dev_w8 log:
trc file: "dev_w8", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Thu Dec 11 16:20:37 2008
B create_con (con_name=R/3)
B Loading DB library 'J:\usr\sap\PAD\SYS\exe\run\dboraslib.dll' ...
B Library 'J:\usr\sap\PAD\SYS\exe\run\dboraslib.dll' loaded
B Version of 'J:\usr\sap\PAD\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.142)
B New connection 0 created
M sysno 00
M sid PAD
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 155
M intno 20020600
M make: multithreaded, ASCII
M pid 3600
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 8 3600) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 14904 (828)
M DpShMCreate: sizeof(tm_adm) 2379840 (11840)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 768000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (364)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06BA0040, size: 3249736)
M DpShMCreate: allocated sys_adm at 06BA0040
M DpShMCreate: allocated wp_adm at 06BA17D8
M DpShMCreate: allocated tm_adm_list at 06BA5210
M DpShMCreate: allocated tm_adm at 06BA5238
M DpShMCreate: allocated wp_ca_adm at 06DEA278
M DpShMCreate: allocated appc_ca_adm at 06DEE8C8
M DpShMCreate: allocated comm_adm_list at 06DF0038
M DpShMCreate: allocated comm_adm at 06DF0050
M DpShMCreate: allocated vmc_adm_list at 06EAB850
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06EAB878
M DpShMCreate: allocated wall_adm at 06EAB880
X
X Thu Dec 11 16:20:38 2008
X EmInit: MmSetImplementation( 2 ).
X <ES> client 8 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Dec 11 16:20:39 2008
M calling db_connect ...
C Prepending I:\oracle\PAD\920 to Path.
C got NLS_LANG='AMERICAN_AMERICA.WE8DEC' from environment
C
C Thu Dec 11 16:20:41 2008
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPPAD's password
C Connecting as /@PAD on connection 0 (nls_hdl 0) ... (dbsl 640 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 WE8DEC 1 04B81028 0938B2A8 0938AD10
C Attaching to DB Server PAD (con_hdl=0,svchp=0938AC64,svrhp=04B85664)
C
C Thu Dec 11 16:20:46 2008
C Starting user session (con_hdl=0,svchp=0938AC64,srvhp=04B85664,usrhp=04B8E274)
C Now '/@PAD' is connected (con_hdl 0, nls_hdl 0).
C Got SAPPAD's password from OPS$-user
C Disconnecting from connection 0 ...
C Close user session (con_hdl=0,svchp=0938AC64,usrhp=04B8E274)
C Now I'm disconnected from ORACLE
C Connecting as SAPPAD/<pwd>@PAD on connection 0 (nls_hdl 0) ... (dbsl 640 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 WE8DEC 1 04B81028 0938B2A8 0938AD10
C Starting user session (con_hdl=0,svchp=0938AC64,srvhp=04B85664,usrhp=04B8E274)
C Now 'SAPPAD/<pwd>@PAD' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.WE8DEC
C Database instance pad is running on NDELNTX5 with ORACLE version 9.2.0.8.0 since 20081211
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20081211 162039 NDELNTX5
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Thu Dec 11 16:20:51 2008
I MtxInit: 8 0 0
M SHM_PRES_BUF (addr: 09650040, size: 20000768)
M SHM_ROLL_AREA (addr: 33B70040, size: 123731968)
M SHM_PAGING_AREA (addr: 0A970040, size: 39845888)
M SHM_ROLL_ADM (addr: 0CF80040, size: 1236040)
M SHM_PAGING_ADM (addr: 0D0B0040, size: 525344)
M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 0D140040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7424 bytes (50 server) at 003F0040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 8 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 8, WP_CNT = 18, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 11C200C8, size: 50000896, end: 14BCF4C8)
B dbtbxbuf: Buffer TABLP (addr: 14BD00C8, size: 30720000, end: 1691C0C8)
B dbexpbuf: Buffer EIBUF (addr: 0FA800D0, size: 4194304, end: 0FE800D0)
B dbexpbuf: Buffer ESM (addr: 169200D0, size: 4194304, end: 16D200D0)
B dbexpbuf: Buffer CUA (addr: 16D300D0, size: 5120000, end: 172120D0)
B dbexpbuf: Buffer OTR (addr: 172200D0, size: 4194304, end: 176200D0)
M
M Thu Dec 11 16:20:54 2008
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M ***LOG R19=> tskh_init, rstsi1_init1 ( Temse 000001) [thxxhead.c 1577]
S *** init spool environment
S
S Thu Dec 11 16:20:55 2008
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 09488AA0
S *** ERROR => TSP01-RQO1NAME : length 20 <-> 100. [rspoini.c 533]
S spool kernel/ddic check: Failed
S using table TSP02F for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S size of spec char cache entry: 165020 bytes (timeout 100 sec)
S size of open spool request entry: 1152 bytes
S immediate print option for implicitely closed spool requests is disabled
M ***LOG R19=> tskh_init, rspoi_init ( Spooler 000001) [thxxhead.c 1628]
M *** ERROR => -
============----
[thxxhead.c 849]
M *** ERROR => RSPO - Error [thxxhead.c 849]
M *** ERROR => code: 1 RSPOEINTERN Some other internal error [thxxhead.c 849]
M *** ERROR => TSP01-RQO1NAME : length 20 <-> 100. [thxxhead.c 849]
M *** ERROR => module: rspoini no: 1 line: 535 T100: PO001 [thxxhead.c 849]
M *** ERROR => TSL01: F8T p3: TSP01-RQO1NAME : length 20 <-> 100. [thxxhead.c 849]
M *** ERROR => -
[thxxhead.c 849]
M *** ERROR => | No entry in error history | [thxxhead.c 849]
M *** ERROR => -
[thxxhead.c 849]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: rspoi_init (step 1, th_errno 2, action 3, level 1) [thxxhead.c 9598]
M
M Info for wp 8
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M Thu Dec 11 16:20:56 2008
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ndelntx5_PAD_00 on host ndelntx5 (wp 8)
M * ERROR tskh_init: rspoi_init
M *
M * TIME Thu Dec 11 16:20:56 2008
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 2
M * MODULE thxxhead.c
M * LINE 9783
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 254]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 8 3600) [dpnttool.c 357]
Please suggest....
Thanks in advance
Harish K Reddy -
Stock transfer PRs are not getting created in APO
Hi,
I have a plant-to-plant transfer is configured using special procurement type. When APO creates stock.PRs , it does not provide any numbers to PRs and they are not getting trasnfered to R3. CIF model for PIR & POs are running good.
In CIF post processing these PRs as stuck and I see " Vendor master data does not exist for plant A" . There is vendor master data created for plant A in R3 and material info record also exists.
How to de-bug this post processing queue to see what is missing in vendor master data?
regards,
shanHi
Can you explain in detail your scenario..you say plant A so I suppose there is plant named B in your scenario. which one is the source location and which one destination location?
In Stock transfer from plant to plant scenario, key is to have correct settings for the system to do source determination.
Assuming plant A as destination and plant B as source. First, The material should be maintained at both the plants.
You need to have a purchasing info record(ME11) linking your material and the source plant B.
I assume you are using external procurement type in your material master. Special procurement type 40 (stock transfer)should be maintained in material master.
Then the system creates a STReq and PurReq using the source plant B. For the system to do this source determination should happen. To verify that..you can check the following...
When you transfer the purchasing info record, system automatically generates the external procurement relationships with source location as plant B, destination location as plant A and info record reference.
When you transfer material master data, the system auto'lly generates transportation lanes between plant A and plant B. (keep in mind transportation lanes should be manually created here)
So in essence you have to check if all the above things are done by the system.
Hope Im clear in this
regards
Mohan V R Chunchu -
Form not getting displayed in sap b one
I have created a form using screen painter.But it is not getting displayed in sap b one.When I debugged the form it doesnot show any error.
Option Strict Off
Option Explicit On
Friend Class frmEmployee
Private WithEvents SBO_Application As SAPbouiCOM.Application
Private objForm As SAPbouiCOM.Form
Public Sub New()
MyBase.New()
'// set SBO_Application with an initialized application object
SetApplication()
LoadFromXML("frmEmployee.xml")
'LoadFromXML("MySimpleFormxml")
'// Get the added form object by using the form's UID
objForm = SBO_Application.Forms.Item("F_4")
'// Show the loaded Form
objForm.Visible = True
'// Saving the Form as an XML file
'// although it already exist as an XML file
'// it is good for practice
'SaveAsXML(objForm)
End Sub
Private Sub SetApplication()
'// Use an SboGuiApi object to establish connection
'// with the SAP Business One application and return an
'// initialized appliction object
Dim SboGuiApi As SAPbouiCOM.SboGuiApi
Dim sConnectionString As String
SboGuiApi = New SAPbouiCOM.SboGuiApi
'// by following the steps specified above, the following
'// statment should be suficient for either development or run mode
sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
'// connect to a running SBO Application
SboGuiApi.Connect(sConnectionString)
'// get an initialized application object
SBO_Application = SboGuiApi.GetApplication()
End Sub
Private Sub LoadFromXML(ByRef FileName As String)
Dim oXmlDoc As Xml.XmlDocument
oXmlDoc = New Xml.XmlDocument
'// load the content of the XML File
Dim sPath As String
'sPath = IO.Directory.GetParent(Application.StartupPath).ToString
sPath = "D:\Final\Forms"
oXmlDoc.Load(sPath & "\" & FileName)
'// load the form to the SBO application in one batch
SBO_Application.LoadBatchActions(oXmlDoc.InnerXml)
End Sub
Private Sub SaveAsXML(ByRef Form As SAPbouiCOM.Form)
Dim oXmlDoc As Xml.XmlDocument
Dim sXmlString As String
oXmlDoc = New Xml.XmlDocument
'// get the form as an XML string
sXmlString = Form.GetAsXML
'// load the form's XML string to the
'// XML document object
oXmlDoc.LoadXml(sXmlString)
Dim sPath As String
'sPath = IO.Directory.GetParent(Application.StartupPath).ToString
sPath = "D:\Final\Forms"
'// save the XML Document
oXmlDoc.Save((sPath & "\frmEmployee1.xml"))
End Sub
End Class -
Filters not getting passed in MDX query while using SAP BW with OBIEE
Hello,
I've been working on OBIEE with SAP BW as back-end. I've created some reports & those are working fine when there is less amount of data. But when I try to run a report with 3 dimensions & 1 fact it throws an error saying "No more storage space available for extending an internal table". When I checked MDX query, I found that the filters that I had applied to request & also selected from prompts are not getting passed in that query. So, I tried running a simple request using a simple filter in Answers. Although this request returns results but I can't see filter conditions in query. MDX query always show crossjoin but I can't see filter conditions anywhere.
Is it the normal OBIEE behaviour OR am I doing something wrong in there? Can you please help me out with this?
Thanks,
RockyHello Sainath,
We tried those things. But it is still giving same error.
State: HY00. Code: 10058. [NQODBC][SQL_STATE:HY000][nQSError: 10058] A general error has occurred. XML/A error returned from the server: Fault code: "XMLAnalysisError.0X80000005". Fault string: "The XML for Analysis provider encountered an error: MDX result contains too many cells (more than 1 million)". (HY000)
The problem here, I think, is the filter parameters are not getting passed in the MDX query. Any idea why would that happen? Is there any setting to do so?
Thanks in advance for help.
Regards,
Rocky -
Gurus,
I am facing an issue regarding SAP TPM IP ( HANA)
I have 3 Infoproviders
Planning infocube, Planning DSO1, Planning DSO2 and i created multiprovider and added these 3 infoproviders into it. I have created Aggregation level on multiprovider. Created Bex Input ready query on Aggregation level.
Issue is Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART.
I tried debugging it and found it is trying to read i_r_pro -> n_ts_part. It is populated with only 3 values (i.e. 2DSOs and 1 Cube), whereas <l_partprov>-partprov is referring to Aggergation level, hence read statement isn't successful, it is dumping.
The class CL_RSD_INFOPROV_CACHE->GET() method is trying to populate the N_TS_PART.N_TS_PART uses P_R_INFOPROV table which seems to be already populated. So, I debugged all the below methods to find out how the P_R_INFOPROV but couldn't find any clue.
Can any one help,it would be really help.
Thanks
AshokHello Gregor,
On the launch of planning layout it throws an error message:
Planning is not possible RSCRM_IMP_CORE008.
When I debugged, i got to a point wherein
particular Real Time Planning DSO is
not getting retrieved under the MultiProivder in below class.
Class: CL_RSCRM_IMP_ACTIONS_SERVICE, Method: GET_INFOPROV is not
returning the real time Info-Provider Name(i.e. Planning DSO)
underlyingthe Multiprovider.
I've also tried to run the report mentioned by you for the Multiprovider but issue still exists.
Let me know, if you have any pointers on this topic.
Thanks,
Jomy -
CPS parameters are not getting updated in SAP
We have recently migrated our SAP and CPs servers, after that we are facing few CPS issues and it is affecting lot of key batch jobs. One typical example is given below.
CPS is supposed to trigger a job DD simulation, by copying the SOURCE_DATE_ID -1-Dec-2006 and modifies the parameters BUDAT and FAEDA_HIGH. The parameter FAEDA_HIGH is calculated as time.now()+ 5 working days as defined in the expression. When we try to run the job today with the date 24 Dec 2010, CPS has calculated the FAEDS_HIGH correctly as 2-Jan-2011. IN SAP the variant gets created but for the field FAEDA_HIGH the date value is not getting updated properly it is display some other date. (e.g) It is showing as 4-jan-2011, I removed the xpression and gave another date for the FAEDA_HIGH field as 10/01/2011, but in SAP it is not getting updated.
Has anyone faced similar kind of issue. share you experience
Regards,
Ramprasad.Hi ,
PLease find attached out XBP version
XBP connection pool for SAP system ISU
XMI interface version : 2.0
Since we have taken backup and restored the SAP Database, the CPs transport file already exists in the System.
Basically what happens is
So actually what is happening is, the CPS parameter FAEDS_HIGH expressions are not used for due date calculation.. CPS just copies the source date-id to target id and similarly for the due date based on the difference
source_id variant date 01-12-2006 due date 02-12-2006 ( Next day)
Target_id Variant date 25-12-2010 due date 26-12-21010 ( Next Day)
I tried changing the Source date id from 01-12-2006 to 24-12-2010.
Source Variant date 24-12-2010 due date 04-01-2011 ( 10 Days)
Target Variant date 25-12-2010 due date 05-01-2011 ( 10 Days)
Regards,
Ram -
I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone 5. The missing movies are shown as generic movie icons in the iTunes panel and are checked to select them. But they do not show up in iPhone Videos. How do I get the original movies to show up again and transfer to the iPhone? I recently upgraded Mac OS to 10.6.8
1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
tt2 -
Hi,
G/L Account mentioned on line level does not get hit in Journal entry on GRPO and AP Invoice in SAP B1 9.0 PL - 11
I am creating an independent AP Invoice, there are two issues:
1. On line level G/L Account field is not open for selection
2. I have then selected and updated the account on Form Settings. Same account gets updated on line level.
In Journal Entry selected G/L account on line level shall be hitted. But it does not put any effect on JE. Accounting is set by Warehouse. It picks up accounts from warehouse only.
Need help its urgent.
Thanks in advance.Invoice is Item Type.
G/L Accounts are set by Warehouse. But if explicitly we are want to change the account on line level in that case, it is not getting reflected in Journal entry. On AR Invoice same scenario works perfectly. On line level I can change the accounts explicitly and have the effect on Journal entries.
Issue seems to be on AP side only.
As required please find attached the screen shots.
JEwith mapped GL Account on Warehouse
JEwith different GL Account on line Level via Form Settings
Thanks & Regards
Sonil -
Solution Manager does not get service definitions from SAP in self diagnosi
Hi,
In our production solution manager transaction solution_manager, self diagnosis we are getting a warning message on our development solution manager.
Solution Manager XXX does not get service definitions from SAP.
The production Solution Manager is the master in SDCCN for the test Solution Manager. In the test Solution Manager, the scheduled task REFRESH SERVICE DEFINITIONS has task System ID of O01. It is pointed to RFC destination SDCC_OSS, not the production Solution Manager system.
It gives the same warning if I point the task to the production Solution Manager system.
Has anyone seen this before? Any ideas?
Best regards,
RussHi,
i guess have you activated SDCCN from your solution manager system too?
if not please activate. since that setup helps solman retrive the service definitions used in SDCCN from SAP (SAPOSS).so this ultimately allows you to set solution manager system as Master, so all the satellite system get the service definition from solman and do not need a direct SAPOSS connection.
and Please check this Note 1143775 - SAP service content update
the wiki for trouble shoot ["EarlyWatch Alert is Red Flagged - how to resolve" |http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=228262728]
please check.
Thanks,
Jansi -
I can not get my ipod classic to transfer photos from my ipod to my pc
You need a third-party program like the paid PhoneView or TouchCopy. The free iFunBox may work.
BTW this is the iPod touch forum.
Maybe you are looking for
-
Add new Place to Time Zone tab in Sys Prefs
I have seen a couple of posts on other forums, plus a similar request, here on the iPhoto09 forum, but not had any success with this yet. I want to do this for the same reason as the OP on the iPhoto forum...so iPhoto Places defaults to an area local
-
Hi, I have done Alert Configuration as per Michal's blog 2328. Though I am getting notified in RWB alert inbox,email is not getting triggered. Thanks in advance, Geetha
-
Why can't I see all my "Sent" messages in webmail?
I've gone to My Settings/Mail/Save Sent Messages numerous times and have selected the radio button "save". Yet, when I go to look at my sent mail in webmail I can only see some of the sent messages. I think it may be the ones sent via webmail and d
-
Question on "How to Handle Inv management Scenarios in BW" docuemnt.
Hi all, I read the document "How to Handle inventory management scenarios in BW" and I did not understood what a snapshot scenario is? Can anyone tell me what is the difference between snapshop and non-cumulative scenario's. thanks, Sabrina.
-
Duplicates in iPhoto 11 with lion
I have tried to use Duplicate Annihilator with iphoto 11 and it found over 1700 duplicates. When I typed duplicate in the search field, as advised, it did not find any images to delete. This worked in with Snow leopard but it now not working. I ha