SAP Unicode Kernel 6.40 Oracle and Oracle 10g EE 10.2.0.1.0

Hi,
is it possible to use:
SAP Unicode Kernel 6.40 Oracle (ORACLE:AKK:6.40:UKERNEL:SAP Unicode Kernel 6.40 Oracle:LINUXX86_64:CD51031036)
with Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64b?
I have noticed the following:
cd /tmp/
SAPCAR.EXE -x -v -f /usr/sap/stage/SAP_KERNEL_64_BIT_UNICODE/51031036/UNIX/LINUXX86_64/SAPEXE.SAR
SAPCAR.EXE -x -v -f /usr/sap/stage/SAP_KERNEL_64_BIT_UNICODE/51031036/UNIX/LINUXX86_64/SAPEXEDB.SAR
1. ldd dboraslib.so
        libdl.so.2 => /lib64/libdl.so.2 (0x00002b9dd2f89000)
        libsapu16.so => not found
        libclntsh.so.9.0 => not found
        libwtc9.so => not found
        libc.so.6 => /lib64/libc.so.6 (0x00002b9dd318e000)
        libstdc+.so.5 => /usr/lib64/libstdc+.so.5 (0x00002b9dd34e1000)
        libm.so.6 => /lib64/libm.so.6 (0x00002b9dd37bd000)
        libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00002b9dd3a40000)
        libpthread.so.0 => /lib64/libpthread.so.0 (0x00002b9dd3c4e000)
        /lib64/ld-linux-x86-64.so.2 (0x0000003808200000)
SAPCAR.EXE -x -v -f /usr/sap/stage/SAP_KERNEL_64_BIT_UNICODE_Q3_08_PATCH/SAPEXE_247-10003358.SAR
SAPCAR.EXE -x -v -f /usr/sap/stage/SAP_KERNEL_64_BIT_UNICODE_Q3_08_PATCH/SAPEXEDB_247-10003360.SAR
1. ldd dboraslib.so
        libdl.so.2 => /lib64/libdl.so.2 (0x00002b8ff56b7000)
        librt.so.1 => /lib64/librt.so.1 (0x00002b8ff58bb000)
        libclntsh.so.9.0 => not found
        libwtc9.so => not found
        libc.so.6 => /lib64/libc.so.6 (0x00002b8ff5ac5000)
        libstdc+.so.5 => /usr/lib64/libstdc+.so.5 (0x00002b8ff5e18000)
        libm.so.6 => /lib64/libm.so.6 (0x00002b8ff60f4000)
        libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00002b8ff6377000)
        libpthread.so.0 => /lib64/libpthread.so.0 (0x00002b8ff6585000)
        /lib64/ld-linux-x86-64.so.2 (0x0000003808200000)
Oracle 10gEnterprise Edition Release 10.2.0.1.0 comes with libclntsh.so.10.1...
Regards,
Andreas Søbstad

Hi Hans,
Thank you for your reply. Here is the output
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 26-SEP-2007 11:34
:02
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=CAL-SLCU2-20)(PORT=1521)
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
Thanks & Regards,
Mike

Similar Messages

Install SAP ERP 6.0 with Linux and Oracle RAC

Hi Guru,
I want to install SAP ERP 6.0 with Linux and Oracle RAC. Is this possible?
Where do I find information?
Thanks,
Hugo.

Hello Hugo,
You can use either RAC or dataguard. On note [105047|http://service.sap.com/sap/support/notes/105047]:
14. Data Guard
    o You can use "Physical Standby".
    o You cannot use "Logical Standby".
    o You can use Data Guard Broker.
    o You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
    o In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
    o Maximum Protection causes the primary database to terminate if problems occur in the standby database.
60. Real Application Cluster (RAC)
    o You can use this feature in accordance with Note 527843.
Regards,
Eduardo Rezende

Differences between TOAD for Oracle and Oracle SQL Developer?

Does someone know the advantages and disadvantages of using TOAD for Oracle and Oracle SQL Developer?
I work making reports with TOAD, but in a few days I will have to use the SQL Developer (because it´s free) unless I justify the necessity of using TOAD.
Could some that used both compare them?
Thanks,
Facundo.

Hello Facundo,
since we are rolling out new client PCs we switch from Toad to SQL Developer. Therefore I'm doing some training for the "normal" users and our developers.
Most users simply want to have access to the data in tables and views. For those there are 2 main issues:
- Filters get lost when exiting table while sorting is still applied. Since there is no way to apply filtering before entering the data tab this can become a great performance issue because sorting is applied to many many rows. For views it is sometimes impossible to open the data tab.
- Exporting date values to Excel needs some know how if you want to sort by this column in Excel, because the date is formatted as "Standard" meaning that the sorting is done as for a text column: 01.01.2009 is less than 02.01.2008. Here you have to use a workaround column with a formula (=1*<datecolumn>)
The greatest Pro is the easy sharing of connections and reports by XML files.
Our developers like the easy debugging in SQL Developer. Though they miss the feature that the source is compiled for debug automatically as in Toad. For this we have distributed a script that compiles any PL/SQL object for debugging.
There are only some Toads installed for DBAs and for users that need access to tables protected by policies that require authentification by OS user since this information is not passed under every circumstance.
Regards
Marcus

SAP DB Reorganisation in SAP 4.6C Kernel 46D Patch 2500 and Oracle 9.2.0.8

Hi Gurus,
I have to delete the clients and then perform DB-Reorg.
Through SCC5, I am deleting the clients.
1) Is it possible to select all the clients and delte altogether, as there are 12 clients to be deleted.
For Reorg, I went through the below notes :
620803
646681
541538
647697
706625
214995
As I am deleting all clients except 3 (000, 001 and development client), do I need to re-organize the entire database ? How to reorganise the entire database at one go ?
Some of the tables are around 90-98 GB.
Is there any way to check from SAP level (other than SQL query) if the Tablespace is DMTS or LMTS and if it is ASSM ?
Incase of DMTS, do you have any document how to convert to LMTS as I am a bit confused.
Does there any dependency on SAP Kernel Level, is it ok to reorg on Kernel 46D.
Thanks and Regards,
Amit

You can't delete all clients in one go... you need to logon into each and schedule the deletion via SCC5.
A reorg of this scale will be very time consuming.. I think it will be much quicker to do a Homogeneous system copy via Export/Import.
Also, if this is your development system make sure you check the client independent requests that might have been release from those clients and also the version management of developments.
Thats my 2cents.
Regards
Juan

Personal Oracle and Oracle Lite ??

I'd like to know the difference between Personal Oracle (PO)
and Oracle Lite:
1. PO = multi user ? - Lite = single user ?
2. PO = stronger/bigger database - Lite = small database ?
2. PO = support PL/SQL ? - Lite = no PL/SQL ?
3. Replica:
Lite = Snapshotsite only;
Support basic and advanced replica with
Enterprise Edition (or Oracle 8i server ?)
as Mastersite
PO = Snapshotsite only ?
Basic (read only) replication only ?
Please help !
Wilco Mulder - Inter Act Industrial Automation.
null

Wilco Mulder (guest) wrote:
: I'd like to know the difference between Personal Oracle (PO)
: and Oracle Lite:
: 1. PO = multi user ? - Lite = single user ?
: 2. PO = stronger/bigger database - Lite = small database ?
: 2. PO = support PL/SQL ? - Lite = no PL/SQL ?
: 3. Replica:
: Lite = Snapshotsite only;
: Support basic and advanced replica with
: Enterprise Edition (or Oracle 8i server ?)
: as Mastersite
: PO = Snapshotsite only ?
: Basic (read only) replication only ?
: Please help !
: Wilco Mulder - Inter Act Industrial Automation.
Hi,
Hereby are some answers:
1 : PO is personal version of Oracle RDBMS, and available under
Win95/98/NT. It is the same kernel than a normal Oracle RDBMS
without some advanced feature (object, etc). Lite is another
kernel and originally is a ODBMS (object DBMS). Lite is available
under Win95/98/NT/CE, Epoc32 (coming) and Palm OS (coming). Both
products are actually single user products. There will be a lite
mini-server which will support mutli-user access.
2 - Yes, PO is a full Oracle RDBMS and Lite is a foot-print
database. But both database are mutil-sessions, row-level locking
etc.
3 - PO supports PL/SQL and Lite support Java Stored procedures.
Both have database triggers.
4 - For the replication feature, both PO and Lite fully support
basic and advanced replciation. That means: readonly snapshot and
updatable snapshots with subquery and subsettings. They can only
play as snapshot sites. The master site must be Oracle 8 or 8i.
Hope these can help,
Regards,
Xin WU
null

Differences between Oracle and Oracle Rdb.

My background is mainly VMS, and so I have grown up (since 1984) with DEC Rdb (now Oracle Rdb). I am starting to get into Oracle, and therefore, starting to learn the subtle differences. With this in mind could someone educate me as to the default transaction type when using SQLPLUS (using interactive SQL it's READ WRITE). What is the initialization file called for SQLPLUS, and are there equivalents to the logical names SQLINI, SQL$DATABASE, SQL$EDIT, etc.
If there is someone out there with experience of both, may be you could ease my pain by posting your pearls of wisdom, or tips, here to help me along the way.

OK, I'll try a few, having moved from VAX/Rdb to Oracle 10 years ago.
Oracle's default transaction state is read-write, isolation level READ COMITTED. This means you generally don't need to do a "SET TRANSACTION" at the start of a transaction, and certainly don't need to keep doing commit;set transaction to see the latest values.
In read-write transactions Oracle does not lock rows on read to maintain consistency in the way Rdb used to. Usually people use SELECT ... FOR UPDATE, or update directly (without a separate select) rather than using isolation SERIALIZABLE, which is the equivalent of Rdb's default.
A script login.sql is executed at the start of a SQLPLUS session. On Unix, it looks for this in the current directory, and the home directory.
On UNIX, SQL$DATABASE becomes "export TWO_TASK=dbname"
On Windows, SQL$DATABASE becomes "set LOCAL=dbname"
I strongly recommend Tom Kyte's Expert one-on-one Oracle book to help your transition, and his web site asktom.oracle.com
Good luck, and welcome.

Global transaction problem with JDriver/Oracle and Oracle XA

We are haveing serious problems with Container Managed Transactions on Bea 6.1
and Oracle with EJB having set "Required" for all methods. We have tried in vain
to make it work with JDriver as well as OracleXAClient. Both fail at sometime
during the execution throwing "Not called in cotext of global transaction" (with
JDriver) OR "XAER_PROTO : Routine was invoked in an
inproper context start() failed on resource 'OracleXAPool'" (this one with oracle
XA).
1.) Weblogic JDriver-XA:
DatabaseMetaData metaData = dataSource.getJDBCConnection.getMetaData();
ResultSet resultSet = metaData.getTables(null, null, tableName.toUpperCase(),
new String[]{"TABLE"});
This fails immmediately saying that it was not called from global transaction.
Interesting thing is that with OracleXA, it doesnt say this exception at this
check point.
2) Oracle XA
Okie, we couldnot read through the CLOB using it so for reading CLOB, we used
direct jdbc connection and then did away with it. Now all next sql queries were
executed against oracle pool using XA data source with OracleXAClient. But at
some point we again ran into the problem "XAER_PROTO : Routine was invoked in
an
inproper context start() failed on resource 'OracleXAPool'"
3 Oracle Thin Driver
everything always works with it.

AFAIR this issue was resoved by moving tx opreations out from non-tx
methods.
Regards,
Slava
"Apurb Kumar" <[email protected]> wrote in message
news:[email protected]...
Jawad,
It would be nice if you can post the full stack trace error message. Didyou try moving to
the latest service pack (sp2) for WLS6.1.
Thanks,
Jawad Mahmood wrote:
Yes we had correctly set TXDataSource and let it to point to the right
connection
pool each time and it worked well with oracle thin driver but not whenwe switched
the pool to JDriver or OracleXAClient. Note that we could aways confirmthat pool
was successfully created alongwith we could retrieve connection from itvia TXDatSource,
things gave problem after we attempted to do what i had mentioned in mylast posting.
>>
Also with JBoss 2.4.4 things work pretty well. So couldnt be our codeproblem.
"Slava Imeshev" <[email protected]> wrote:
Jawad,
Did you set up TxDataSource?
Regards,
Slava Imeshev
"Jawad Mahmood" <[email protected]> wrote in message
news:[email protected]...
We are haveing serious problems with Container Managed Transactionson
Bea 6.1
and Oracle with EJB having set "Required" for all methods. We havetried
in vain
to make it work with JDriver as well as OracleXAClient. Both fail atsometime
during the execution throwing "Not called in cotext of global
transaction"
(with
JDriver) OR "XAER_PROTO : Routine was invoked in an
inproper context start() failed on resource 'OracleXAPool'" (this onewith
oracle
XA).
1.) Weblogic JDriver-XA:
DatabaseMetaData _metaData =
_dataSource.getJDBCConnection.getMetaData();
ResultSet resultSet = metaData.getTables(null, null,tableName.toUpperCase(),
new String[]{"TABLE"});
This fails immmediately saying that it was not called from globaltransaction.
Interesting thing is that with OracleXA, it doesnt say this exceptionat
this
check point.
2) Oracle XA
Okie, we couldnot read through the CLOB using it so for reading CLOB,we
used
direct jdbc connection and then did away with it. Now all next sqlqueries
were
executed against oracle pool using XA data source with
OracleXAClient.
But
at
some point we again ran into the problem "XAER_PROTO : Routine wasinvoked
in
an
inproper context start() failed on resource 'OracleXAPool'"
3 Oracle Thin Driver
everything always works with it.
Apurb Kumar

Is there any problem for having Oracle and Oracle Express?

Hi
Thank you for reading my post
is there any problem with having both oracle 10gR2 and oracle express installed on the same machine?
thanks

There is no theoretical technical problem with multiple Oracle databases on a machine, and I have indeed such an environment on several machines.
Although people have been known to create their own technical problems by not being careful.
You may want to review your knowledge of Oracle architecture, as you MUST have separate ORACLE_HOMEs. The ORACLE_HOME and ORACLE_SID are predefined for XE and it's important to keep things straight.

Dispacher not getting Started...SAP ECC 6.0 on Win2K3 and Oracle.

HI Experts,
I have installed SAP ECC 6.0 (OS-Win2003sp2 DB-Oracle10g). Installation was successful, I have also logged in and created a user in SU01. But when I restart the system I am not able to up the sapserver. SAP MMC - dispacher is not starting. I have started OracleListener in service.sap and restarted the system. Un-installed and again installedj2sdk1.4.2_12 and restarted the system...No use, still dispatcher is not getting up....Pls find below paster Developer Trace for Dispatcher....
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        PRD
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    111
intno      20050900
make:      multithreaded, Unicode, optimized
pid        2200
Wed Oct 28 09:26:27 2009
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ****
***LOG Q00=> DpSapEnvInit, DPStart (00 2200) [dpxxdisp.c   1239]
*     shared lib "dw_xml.dll" version 111 successfully loaded*
*     shared lib "dw_xtc.dll" version 111 successfully loaded*
*     shared lib "dw_stl.dll" version 111 successfully loaded*
*     shared lib "dw_gui.dll" version 111 successfully loaded*
*     shared lib "dw_mdm.dll" version 111 successfully loaded*
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Oct 28 09:26:32 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds*
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sap_PRD_00                              <
DpShMCreate: sizeof(wp_adm)          18672     (1436)
DpShMCreate: sizeof(tm_adm)          4232256     (21056)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm)          528064     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1536)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 06810040, size: 4892312)
DpShMCreate: allocated sys_adm at 06810040
DpShMCreate: allocated wp_adm at 06812090
DpShMCreate: allocated tm_adm_list at 06816980
DpShMCreate: allocated tm_adm at 068169B0
DpShMCreate: allocated wp_ca_adm at 06C1FDF0
DpShMCreate: allocated appc_ca_adm at 06C25BB0
DpShMCreate: allocated comm_adm at 06C27AF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06CA89B0
DpShMCreate: allocated gw_adm at 06CA89F0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06CA8A20
DpShMCreate: allocated wall_adm at 06CA8A28
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 2404
argv[0] = E:\usr\sap\PRD\DVEBMGS00\exe\jcontrol.EXE
argv[1] = E:\usr\sap\PRD\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS00_sap
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1048
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=PRD
argv[7] = -DSAPMYNAME=sap_PRD_00
argv[8] = -DSAPPROFILE=E:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS00_sap
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1629]
Wed Oct 28 09:26:33 2009
***LOG Q0K=> DpMsAttach, mscon ( sap) [dpxxdisp.c   11753]
DpStartStopMsg: send start message (myname is >sap_PRD_00                              <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Wed Oct 28 09:26:34 2009
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Wed Oct 28 09:26:51 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1444*
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1063) [nixxi.cpp    4248]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2404)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]*
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Wed Oct 28 09:27:13 2009
ERROR => W0 (pid 2412) died [dpxxdisp.c   14441]*
ERROR => W1 (pid 2420) died [dpxxdisp.c   14441]*
ERROR => W2 (pid 2428) died [dpxxdisp.c   14441]*
ERROR => W3 (pid 2436) died [dpxxdisp.c   14441]*
ERROR => W4 (pid 2444) died [dpxxdisp.c   14441]*
ERROR => W5 (pid 2452) died [dpxxdisp.c   14441]*
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 2460) died [dpxxdisp.c   14441]*
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2468) died [dpxxdisp.c   14441]*
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 2476) died [dpxxdisp.c   14441]*
ERROR => W9 (pid 2484) died [dpxxdisp.c   14441]*
ERROR => W10 (pid 2492) died [dpxxdisp.c   14441]*
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 2500) died [dpxxdisp.c   14441]*
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 2508) died [dpxxdisp.c   14441]*
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes*
DISPATCHER EMERGENCY SHUTDOWN ****
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1577
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 28 09:27:23 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Wed Oct 28 03:57:23 2009
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA     2412 Ended         no      1   0        0
1 DIA     2420 Ended         no      1   0        0
2 DIA     2428 Ended         no      1   0        0
3 DIA     2436 Ended         no      1   0        0
4 DIA     2444 Ended         no      1   0        0
5 DIA     2452 Ended         no      1   0        0
6 UPD     2460 Ended         no      1   0        0
7 ENQ     2468 Ended         no      1   0        0
8 BTC     2476 Ended         no      1   0        0
9 BTC     2484 Ended         no      1   0        0
10 BTC     2492 Ended         no      1   0        0
11 SPO     2500 Ended         no      1   0        0
12 UP2     2508 Ended         no      1   0        0
Dispatcher Queue Statistics               Wed Oct 28 03:57:23 2009
===========================
--------++++--+
| Typ |    now |   high |    max | writes | reads |
--------++++--+
| NOWP |      0 |      2 |   2000 |      6 |      6 |
--------++++--+
| DIA |      5 |      5 |   2000 |      5 |      0 |
--------++++--+
| UPD |      0 |      0 |   2000 |      0 |      0 |
--------++++--+
| ENQ |      0 |      0 |   2000 |      0 |      0 |
--------++++--+
| BTC |      0 |      0 |   2000 |      0 |      0 |
--------++++--+
| SPO |      0 |      0 |   2000 |      0 |      0 |
--------++++--+
| UP2 |      0 |      0 |   2000 |      0 |      0 |
--------++++--+
max_rq_id          12
wake_evt_udp_now     0
wake events           total     8, udp     7 ( 87%), shm     1 ( 12%)
since last update     total     8, udp     7 ( 87%), shm     1 ( 12%)

Hi,
Could you please also paste dev_w0 logs ?
Thanks
Sunny

Export import - using TOAD FOR ORACLE and ORACLE DATABASE 10G EXPRESS or s

Hi all,
Could you please kindly help me?
I am using TOAD FOR ORACLE to export a table to flat file A. The tool just supports to distinguish fields by "spaces".
And the web page of ORACLE DATABASE 10G EXPRESS to import the data from flat file A to another database. To load data to a table from a text file, the web page bases on "comma" to distinguish fields.
So could you have any suggestion for me? I need to export data via TOAD FOR ORACLE. And then import it to another database by the home page of ORACLE DATABASE 10G EXPRESS or sqlplus.
Thank you so much for your help!

Dont use TOAD for exporting your data. Use PL/SQL. Below is the code given in Asktom.com that does what you want.
create or replace function dump_csv( p_query     in varchar2,
                                      p_separator in varchar2 default ',',
                                      p_dir       in varchar2 ,
                                      p_filename in varchar2 )
return number
is
    l_output        utl_file.file_type;
    l_theCursor     integer default dbms_sql.open_cursor;
    l_columnValue   varchar2(2000);
    l_status        integer;
    l_colCnt        number default 0;
    l_separator     varchar2(10) default '';
    l_cnt           number default 0;
begin
    l_output := utl_file.fopen( p_dir, p_filename, 'w' );
    dbms_sql.parse( l_theCursor, p_query, dbms_sql.native );
    for i in 1 .. 255 loop
        begin
            dbms_sql.define_column( l_theCursor, i, l_columnValue, 2000 );
            l_colCnt := i;
        exception
            when others then
                if ( sqlcode = -1007 ) then exit;
                else
                    raise;
                end if;
        end;
    end loop;
    dbms_sql.define_column( l_theCursor, 1, l_columnValue, 2000 );
    l_status := dbms_sql.execute(l_theCursor);
    loop
        exit when ( dbms_sql.fetch_rows(l_theCursor) <= 0 );
        l_separator := '';
        for i in 1 .. l_colCnt loop
            dbms_sql.column_value( l_theCursor, i, l_columnValue );
            utl_file.put( l_output, l_separator || l_columnValue );
            l_separator := p_separator;
        end loop;
        utl_file.new_line( l_output );
        l_cnt := l_cnt+1;
    end loop;
    dbms_sql.close_cursor(l_theCursor);
    utl_file.fclose( l_output );
    return l_cnt;
end dump_csv;
/Here is the link to this thread in asktom.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:95212348059

Sql server - to oracle - and oracle - to sql server

hi
is there any good tool for Migration from sql server 2008 to oracle 11g - and from oracle 11g to sql server 2008 ?
thank's in advance

Hello,
the SQL Developer Migration Workbench does not yet include online migrations of SQL Server 2008 (maximum version is 2005) to Oracle 11g. But an offline migration should work. Please refer to:
http://www.oracle.com/technology/tech/migration//workbench/index_sqldev_omwb.html
SQL server 2008 migration problem
For the other direction from Oracle to SQL Server you should check Microsoft sites, e.g. start here:
http://www.microsoft.com/Sqlserver/2008/en/us/migration.aspx
Best regards
Wolfgang

Su - oracle and oracle kde login not allowed after wls setup

Hi,
I setup a wls 10.3.3 to install the Grid Control 11g (on CentOS 5.5).
After the wls setup I cannot go on logging as oracle on KDE or su - oracle from root, because I am getting permission denied.
What should I do to solve this?
Thanks
Fabio D'Alfonso

check the permissions of /bin - it should be 755 also for the others the permissions are as follows
lost+found = 770
proc = 555
root = 750
tmp =777

Error Installing CE 7.2 on WIndows 2008R2 and Oracle 11 g2

During the install of the Database Instance at RDMS Client Oracle selection page even after selecting the correct version of Oracle client down loaded form SAP following message is displayed:
You entered: I:\source-sap\51038966-ORACLE-Client-112\OCL_WINDOWS_X86_64
Found the label ORACLE:11.2:CLIENT:Oracle Client 11.2.0.2 V1:WINDOWS_X86_64:AMD64:CD51030xxx but need the label ORACLE:10.0G:CLRDBMS::WINDOWS_X86_64:**
Would be grateful if anybody can suggest a solution. Have not been able to find anything about this in SAP notes or SDN for Windows and Oracle 11.2 g
Thanks
T.K.

Hi Tarek,
I hope you might have resolved this issue by now.
Solution:
This issue seems that you have not given the correct path of the "Oracle Client" which will be 10.0G, rather giving the oracle software location of Oracle 11.2G. You need to download Oracle client 10G from marketplace from the same place where you have downloaded the master DVD installation media and provide this path.
Best Regards,
Tushar Rathi

Directory Setup for RAC and Oracle Restart

I have three database installations that I'd like some insight on the initial directory structure and permissions. The three installations are:
1) Prod RAC - OEL 5U2, 11.2.0.2 Grid Infrastructure, 11.2.0.2 DB EE with RAC option
2) Test RAC - OEL 5U2, 11.2.0.2 Grid Infrastructure, 11.2.0.2 DB EE with RAC option
3) Single Instance - OEL 5U2, 11.2.0.2 Grid Infrastructure Standalone (Oracle Restart), 11.2.0.2 DB EE
The they all have two users GRID (for Grid Infrastructure Software Owner) and ORACLE (for Oracle Database Software Owner).
We had a consultant install the databases. It's very weird since we have an inconsistency in directories and permission. I want to understand the inconsistency between RAC installations as well as Oracle Restart Install.
SEE BELOW: The two RAC servers have different owners for /u01/app/11.2.0.2 directory. The Oracle Restart Installation - Single Instance has the same owner as Prod RAC but different than Test RAC. What the consultant said was that ORACLE_BASE would be /u01/app/oracle for both Grid Infrastructure and Database installations. This was to apply to TEST/PROD RAC (3 node, 3 instances, 1 instance/node) and Oracle Restart installation. The GRID_HOME would be /u01/app/11.2.0.2/grid and ORACLE_HOME would be /u01/app/11.2.0.2/db_1. It seems like the owners aren't setup correctly. Why? I don't want problems with patching or upgrading. If this setup is technically incorrect what is the best way to setup so there's no owner/permission issues. Is it necessary to have two separate ORACLE_BASE's like /u01/app/grid?
PRODUCTION REAL APPLICATION CLUSTER (Displaying only one Node details)
$ cd app
drwxr-xr-x 6 root oinstall 4096 Feb 26 2011 .
drwxr-xr-x 3 root oinstall 4096 Apr 21 2009 ..
drwxrwxr-x 4 grid oinstall 4096 Feb 26 2011 11.2.0.2
drwxrwxr-x 2 emagent oinstall 4096 Feb 26 2011 emagent
drwxrwxr-x 9 oracle oinstall 4096 May 16 2011 oracle
drwxrwx--- 7 grid oinstall 4096 Feb 26 2011 oraInventory
$ cd 11.2.0.2
drwxrwxr-x 4 grid oinstall 4096 Feb 26 2011 .
drwxr-xr-x 6 root oinstall 4096 Feb 26 2011 ..
drwxr-xr-x 79 oracle oinstall 4096 Mar 29 2011 db_1
drwxr-xr-x 69 root oinstall 4096 Feb 26 2011 grid
$ cd ..
$ cd oracle
9 oracle oinstall 4096 May 16 2011 .
drwxr-xr-x 6 root oinstall 4096 Feb 26 2011 ..
drwxr-xr-x 4 oracle oinstall 4096 Feb 26 2011 admin
drwxr-xr-x 3 oracle oinstall 4096 Feb 26 2011 cfgtoollogs
drwxrwxr-x 2 grid oinstall 4096 Feb 26 2011 Clusterware
drwxrwxr-x 11 grid oinstall 4096 Feb 26 2011 diag
drwxrwxr-x 3 grid oinstall 4096 Feb 26 2011 hqrac03
drwxr----- 3 oracle oinstall 4096 May 16 2011 oradiag_oracle
drwxr-xr-x 3 root root 4096 Mar 13 2011 oradiag_root
TEST REAL APPLICATION CLUSTER (Displaying only one Node details)
$ cd app
drwxr-xr-x 6 root oinstall 4096 Jan 26 2011 ./
drwxr-xr-x 3 root oinstall 4096 Jan 26 2009 ../
drwxrwxr-x 4 root oinstall 4096 Jan 26 2011 11.2.0.2/
drwxrwxr-x 2 emagent oinstall 4096 Mar 1 2011 emagent/
drwxrwxr-x 10 grid oinstall 4096 May 16 2011 oracle/
drwxrwx--- 7 grid oinstall 4096 Jan 27 2011 oraInventory/
$ cd 11.2.0.2
drwxrwxr-x 4 root oinstall 4096 Jan 26 2011 ./
drwxr-xr-x 6 root oinstall 4096 Jan 26 2011 ../
drwxr-xr-x 80 oracle oinstall 4096 Mar 17 2011 db_1/
drwxr-xr-x 70 root oinstall 4096 Jan 27 2011 grid/
$ cd ..
$ cd oracle
drwxrwxr-x 10 grid oinstall 4096 May 16 2011 ./
drwxr-xr-x 6 root oinstall 4096 Jan 26 2011 ../
drwxr-xr-x 4 oracle oinstall 4096 Feb 2 2011 admin/
drwxr-xr-x 4 oracle oinstall 4096 Feb 2 2011 cfgtoollogs/
drwxr-xr-x 2 grid oinstall 4096 Jan 26 2011 Clusterware/
drwxrwxr-x 11 grid oinstall 4096 Jan 26 2011 diag/
drwxr-xr-x 3 grid oinstall 4096 Jan 26 2011 hqract03/
drwxr-xr-x 3 grid oinstall 4096 Mar 23 2011 oradiag_grid/
drwxr----- 3 oracle oinstall 4096 May 16 2011 oradiag_oracle/
drwxr-xr-x 3 root root 4096 Jan 27 2011 oradiag_root/
SINGLE INSTANCE DATABASE (ORACLE RESTART)
$ cd app
drwxrwxr-x 6 503 oinstall 4096 Feb 26 2011 .
drwxr-xr-x 3 root root 4096 Apr 16 2009 ..
drwxrwxr-x 4 grid oinstall 4096 Feb 26 2011 11.2.0.2
drwxrwxr-x 8 grid oinstall 4096 Feb 26 2011 oracle
drwxrwx--- 6 grid oinstall 4096 Feb 26 2011 oraInventory
$ cd 11.2.0.2
drwxrwxr-x 4 grid oinstall 4096 Feb 26 2011 .
drwxrwxr-x 6 503 oinstall 4096 Feb 26 2011 ..
drwxr-xr-x 76 oracle oinstall 4096 Apr 6 2011 db_1
drwxr-x--- 69 root oinstall 4096 Feb 26 2011 grid
$ cd ..
$ cd oracle
drwxrwxr-x 8 grid oinstall 4096 Feb 26 2011 .
drwxrwxr-x 6 503 oinstall 4096 Feb 26 2011 ..
drwxrwxr-x 5 grid oinstall 4096 Feb 26 2011 admin
drwxrwxr-x 7 grid oinstall 4096 Feb 26 2011 cfgtoollogs
drwxrwxr-x 2 grid oinstall 4096 Feb 26 2011 checkpoints
drwxrwxr-x 2 grid oinstall 4096 Feb 26 2011 Clusterware
drwxrwxr-x 11 grid oinstall 4096 Feb 26 2011 diag
drwxrwxr-x 3 grid oinstall 4096 Feb 26 2011 hqods01
Thanks so much.

Hello
I did only check prod, as that is the important one.
i am afraid that setup is not clean. I won't use the work is wrong, but need to be normalized.
grid oracle base need to be separate from oracle oracle base, and the grid oracle home, MUST be outside of oracle base/oracle home of the oracle user.
In a multi user setup, the structure should be as follow.
grid user, group oinstall, asm* groups
oracle user, group oinstall, dba and db* groups
The GRID install, have, grid home and oracle base
the oracle base for grid should be, /u01/app/grid
the grid home should be, /u01/app/11.2.0.3/grid
the Oracle user have several homes, and oracle base
the oracle base for oracle should be, /u01/oracle
so, for permissions, when I create this, i do as root
mkdir -p /u01/app/11.2.0.3/grid
mkdir -p /u01/app/grid
mkdir -p /u01/app/oracle
mkdir -p /u01/app/oraInventory
chown -R grid:oinstall /u01
chown -R oracle:oinstall /u01/app/oracle
then, you install grid .. you have so say oracle home is /u01/app/grid and oracle home is /u01/app/11.2.0.3/grid
at the end, the root.sh as part of the install will take care of the permissions for oraInventory, and the rest for grid.
when grid is installed, you can move to the oracle db install you use oracle base as /u01/app/oracle and oracle home as /u01/app/oracle/product/11.2.0.3/dbhome_1
that will give you
2 4 drwxr-xr-x 6 root oinstall 4096 Sep 21 03:20 /u01
5996545 4 drwxr-xr-x 6 root oinstall 4096 Sep 18 22:58 /u01/app
5996546 4 drwxr-xr-x 8 grid oinstall 4096 Sep 18 22:50 /u01/app/grid
5996547 4 drwxr-xr-x 3 root oinstall 4096 Sep 18 22:30 /u01/app/11.2.0.3
5996548 4 drwxr-xr-x 69 root oinstall 4096 Sep 21 10:52 /u01/app/11.2.0.3/grid
5996549 4 drwxrwx--- 5 grid oinstall 4096 Oct 30 22:08 /u01/app/oraInventory
7406840 4 drwxr-xr-x 7 oracle oinstall 4096 Oct 30 22:09 /u01/app/oracle
7406841 4 drwxr-xr-x 3 oracle oinstall 4096 Sep 18 22:58 /u01/app/oracle/product
7406842 4 drwxr-xr-x 6 oracle oinstall 4096 Oct 30 22:04 /u01/app/oracle/product/11.2.0.3
7766052 4 drwxr-xr-x 77 oracle oinstall 4096 Nov 2 01:20 /u01/app/oracle/product/11.2.0.3/dbhome_1
Each user have to use his own oracle_base, as each oracle_base will store files and folders created for logs, admin, diagnostic with different permissions and different usages, for a reason you have role separation.
example of the content of each oracle base
$ find /u01/app/oracle/ -maxdepth 1 -ls
7406840 4 drwxr-xr-x 7 oracle oinstall 4096 Oct 30 22:09 /u01/app/oracle/
7406841 4 drwxr-xr-x 3 oracle oinstall 4096 Sep 18 22:58 /u01/app/oracle/product
8749076 4 drwxrwxr-x 3 oracle asmadmin 4096 Sep 18 23:03 /u01/app/oracle/diag
8749064 4 drwxr-x--- 6 oracle oinstall 4096 Oct 30 22:09 /u01/app/oracle/admin
8716289 4 drwxr-xr-x 2 oracle oinstall 4096 Oct 30 22:18 /u01/app/oracle/checkpoints
8749061 4 drwxr-x--- 5 oracle oinstall 4096 Sep 18 23:12 /u01/app/oracle/cfgtoollogs
$ find /u01/app/grid/ -maxdepth 1 -ls
5996546 4 drwxr-xr-x 8 grid oinstall 4096 Sep 18 22:50 /u01/app/grid/
7307540 4 drwxrwxr-x 4 grid oinstall 4096 Sep 18 22:49 /u01/app/grid/diag
7307474 4 drwxr-xr-x 2 grid oinstall 4096 Sep 18 22:33 /u01/app/grid/Clusterware
7307265 4 drwxr-xr-x 2 grid oinstall 4096 Sep 18 22:33 /u01/app/grid/checkpoints
7307532 4 drwxr-x--- 4 grid oinstall 4096 Sep 18 22:49 /u01/app/grid/cfgtoollogs
7406796 4 drwxr-xr-x 3 root root 4096 Sep 18 22:50 /u01/app/grid/oradiag_root
Take care,
Alvaro.

Replication between Oracle and SQL Server

Does anyone have any experience with replicating data between SQL Server and Oracle database system? If so, I am experiencing time out errors when replicating data. I replicating from SQL Server 2k to Oracle and it time out on the Oracle side.

how to configure my apply process to work with sql server by getway , I want to make replication
note :
I make dblink between oracle and sql and make insert from oracle to sql
is it sufficient to make replication by OEM between oracle and oracle and then add new apply process to work with gateway for sql server and how ?

SAP Unicode Kernel 6.40 Oracle and Oracle 10g EE 10.2.0.1.0

Similar Messages

Maybe you are looking for