SAP upgrade - questions for report painter and query

Hi Experts,
I have two quwstions of SAP upgrade.
My requirement is: SAP upgrade from 4.6B to ECC 6.0 with non-unicode.
1.Does SAP upgrade influence the report painter? If influence, could you tell me what should I do for this case.
2. We have so many queries (SQ01) in our system and many of them haven't been run for a long time. we need a tool to get the runtimes of queries in a certain durition.
For example: From 2008/01/01 to 2008/03/31,I want to know how many queries had been run/ query name/ runtimes of each query.
Best regards,

> 1.Does SAP upgrade influence the report painter? If influence, could you tell me what should I do for this case.
You can check
Note 1155524 - ReportWriter: Upgrade Issues ECC6.0 -Common Customer Issues
> 2. We have so many queries (SQ01) in our system and many of them haven't been run for a long time. we need a tool to get the runtimes of queries in a certain durition.
Such a tool was RBE (Reverse Business Engineer) - which is out of support.
You can try to get that information from ST03. If that is not enough there's no other way than booking an SLO service to find out the queries that have not been used (http://service.sap.com/slo).
Markus

Similar Messages

  • Report Painter and Report Writer (URGENT)

    Hi All,
         Please can you send me Step by Step screen shots Configuration document for Report Painter and Report Writer,
    If any body send relavent data i will give reword points,
    Regards,
    TML

    Hi,
    see the below link cfor complete documentaion of report painter.
    http://www.virtuosollc.com/PDF/Get_Reporter.pdf
    Thanks.

  • Report painter and drilldown

    Dear Friends
    Please send steps for Report painter and drilldown report how to do
    Regards
    JK
    Moderator: Step 1 - search before posting

    diff b/w normal reports and interactive reports
       Normal report contains only one output screen
      Interactive reports contains 0-20 screens.
    sometimes client requirement is whenever we perform action
    on outputscreen it will goes to next screen there we will display the complete details of thet particular field.

  • SAP Report Painter - SAP tables for report items and hierarchy

    Hello,
    can you pls. help me with an information about the list of SAP tables for Report Painter, particularly the tables where the report items/positions and report hierarchy are stored?
    for example, for the Report Writer report items and report hierarchy can be found in T8* tables.
    What are these tables for Report Painter?
    thank you in advance for any info.
    Regards,
    Jasminka
    Edited by: Jasminka Vlahovic on Dec 29, 2010 8:53 PM

    Hi  Jasminika ,
    Could you please share with me those tables names where report items  and hierarchy are saved
    Regards
    Neeraj

  • Difference between Report painter and abap query .

    can anyone please tell me the difference between the report painter and the ordinary alv,clasical reporting and also the difference between Report painter and abap query. How the output format will be in Report painter. If anyone has any documents please send it to
    [email protected]
    Thanks,
    Joseph.

    hi,
    ABAP Query is an ABAP Workbench tool that enables users without knowledge of the ABAP programming language to define and execute their own reports.
    In ABAP Query, you enter texts and select fields and options to determine the structure of the reports. Fields are selected from functional areas and can be assigned a sequence by numbering.
    link for abap query --
    https://forums.sdn.sap.com/click.jspa?searchID=221911&messageID=2790992
    whereas the Report Painter enables you to report on data from various applications. It uses a graphical report structure that forms the basis for the report definition. When defining the report, you work with a structure that corresponds to the final structure of the report when the report data is output.
    link for report painter --
    https://forums.sdn.sap.com/click.jspa?searchID=221874&messageID=1818114
    Regards,
    pankaj singh
    Message was edited by:
            Pankaj Singh
    Message was edited by:
            Pankaj Singh

  • Report Painter and Report Query

    Hi,
    Can some body explain me the difference between Report painter and report queries. How these are diffrent from ABAP prgram and ABAP queries. Who are the persons who are using all these like functional consultant or ABAPer or End users.
    Regards
    RKG.

    Hi
    Report Painter is mainly used by CO functional consultants for generating reports using variables, Key fugures and sets. This is a SAP standard functionality.
    ABAB Queries / Report queries are created by Abapers and Functional consultants , this is mainly to join two or more tables run a query on the available data in the table and get the reports
    ABAP program are complete program which are the coding language of SAP, where a program can be created for a new functionality which is not available in SAP . However the data required for this program has to available in SAP.
    Anand

  • Need to give access to users for report painter query without GR55

    Hi,
    I need to create a transaction code for a query created using report painter. We do  not want to give access to user for GR55.
    Please help us in achieveing this one or any other way to execute report without GR55 access.
    Regds,
    Servesh
    Moderator: Please, search before posting - it has been answered several times

    Hi,
    You can create the transaction the same using SE93 transaction code.
    Also see the below link for detailed rocess:-
    [http://home4sap.com/Blog/2009/08/how-to-create-a-transaction-code-for-report-painter-reports/]
    Regards,
    Gaurav

  • Change the default setting for report painter reports.

    HI All
    Can we change the default setting in SAP/R3  in the report painter reports  for the selection screen options?
    If yes,Please let  me know how we can change the default settings.
    Thanks in Advance
    Best regards
    Venu

    HI
    We have a report developed in the report painter for profit center accounting and we have selection screen for this report.
    Few of the selection screen fields parameter are set by default and we need to change the default setting for the selection screen fields parameters.
    How and where do we  set or change the default parameters for the selection screen ?
    Thanks in advance
    Best Regards
    Venugopal

  • SCREEN SHOTS FOR REPORT PAINTER

    Hello everybody  ,
    cananybody tell me what is the report painter and  how to create it  ,
    if abybody having the screen-shots then please  give me
    regrads,
    sandeep jadhav

    Hi,
      http://www.virtuosollc.com/PDF/Get_Reporter.pdf
    http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
    Report Painter allows you to create reports using data from SAP application components, which you can adapt to meet your individual requirements.
    Many of your reporting requirements can already be met by using the standard reports provided by various SAP application components. If these SAP standard reports do not meet your reporting needs, Report Painter enables you to define your specific reports quickly and easily.
    Report Painter fulfills a function similar to Report Writer, but is easier to use. Most of the functions found in Report Writer have been built into Report Painter; however, you do not need to be familiar with all Report Writer concepts (such as Sets) in order to use Report Painter.
    When executing a Report Painter report, it is displayed by the system in Report Writer format. You thus have access to the same functions as for Report Writer reports defined in the same way, and can combine Report Painter and Report Writer reports together in a report group.
    Report Painter uses a graphical report structure, which forms the basis for your report definition and displays the rows and columns as they appear in the final report output.
    To facilitate report definition, you can use many of the standard reporting objects provided by SAP (such as libraries, row/column models, and standard layouts) in your own specific reports. When you define a Report Painter report you can use groups (sets). You can also enter characteristic values directly.
    Advantages of Report Painter include:
    Flexible and simple report definition
    Report definition without using sets
    Direct layout control: The rows and columns are displayed in the report definition as they appear in the final report output, making test runs unnecessary.
    http://help.sap.com/saphelp_47x200/helpdata/en/56/32e339b62b3011e10000000a11402f/content.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
    Regards
    Kiran Sure

  • Tcode for Report painter

    Hello All,
    when m trying to create a tcode for report painter through se93 its show erre for D_SREPOVARI-EXTDREPORT parameter,m felling the parameter with the value gatting from table TKEB1,-APPLCLASS /SUBCLASS /TABNAME  23 space / REPID.error is do not use blank char. Suggest Please and please give some idea about how to copy a stand. report painter and change the Z according to client requirement.
    Thanks
    Sam

    Hi,
    I will suggest you to execute the transaction START_REPORT and put the report type report and ext. name. If it executes well over here then you can create a transaction using SE93
    Something like this
    Default value for transaction ‘START_REPORT’
    In    bellow default value section insert default value
    SREPOVARI-REPORTTYPE      = AQ      "Parameter    indicating Abap Query
    D_SREPOVARI-REPORT           = ZY_CS_ALLSLS   "Query    User group
    D_SREPOVARI-EXTDREPORT= ZY_SLS_MST_001     "Query name  
    Hope this helps.
    Thanks,
    Tooshar Bendale

  • Add in Library for Report Painter/Writer 9PCC

    Hi SAP,
    I need to include in Library for Report Painter/Writer the component 9A2 CO-OM-IS-BP Business processes: Special reports because I need to run 9PCC, but 9PCC don't exist in my system.
    Would I like know if it exist the SAP note include in Library?
    Best regards,
    Edited by: Fabio Gil on Jul 1, 2010 6:35 PM

    Hi,
    You can create a library via GR21 transaction. What tables do you want to join? Depending on this, one can tell whether it's possible or not.
    You can search for available info on the forum; similar questions were already asked.
    Regards,
    Eli

  • Report Designer  and Query Designer in BI 7.0

    Hi friends,
          what is the use of  Report Designer  and Query Designer.. and what is the difference between  these two..
        I know about  Analyser... that is used for designing a query and we can analyse (or) see the result of that query in that  window....
         then what is  the use of Query Designer... can you  give me the brief  introduction abt that...  if any documents plz farword  to me..
    my mail id--- [email protected]
    thanks
    @jay

    Hi Ajay,
    Report Designer is a newly added feature in BI 7. This helps to do cosmetic changes to the report, change the fonts, add colors etc. Please check this link for more info on Report designer.
    http://help.sap.com/saphelp_nw04s/helpdata/en/17/16d941de405f24e10000000a1550b0/frameset.htm
    Query Designer, is where you develop, edit your queries.
    Analyzer, is where you execute the query and analyze the results.
    Hope this helps.

  • Differences Between Report Painter and Report Writer

    Hi,
    Anyone knows the differences between report painter and report writer?
    Thanks,
    CW

    Hello CW Teo,
    Yes report writer can be used in logistics also. One of the way which I am aware of is described below.
    Flexible analyses allow you to can tailor the way in which key figures are combined and aggregated. This means that it is possible to both provide administrators with detailed information and management with aggregated information.
    Flexible analyses enable easy access to the Report Writer, a user-friendly tool with which you can create reports for various analyses. The Report Writer is integrated in other SAP applications, such as Extended General Ledger and Cost Center Accounting.
    Evaluation structures form the interface to the Report Writer. Evaluation structures consist of characteristics and key figures and are easy to construct.An evaluation structure with the same name exists for each information structure in the standard system.Even the self-defined information structures created in Customizing can be evaluated via the flexible analyses.
    Evaluations:You can create an evaluation on the basis of the evaluation structure.
    To define an evaluation, all you need to do is select the characteristics and key figures you require (pick-up technique).One of the especially useful features here is that you have the option of tailoring the layout of your report to suit your particular requirements. You can also define extra key figures for the reports, which are derived from existing key figures by means of calculation formulas. You can thereby multiply the key figures or divide one key figure by another.
    ============================================================
    In addition to the above you can also edit a report in logistics module with the help of a report writer. below mentioned is the process for it.
    It is now possible to edit your report data using the Report Writer. You can also change the layout of the report. The most important functions of the layout design are summarized below.
    Summation levels:In the report screen, you can use the menu sequence View ->Summation level to specify the number of summation used to calculate total values. All totals that do not lie within the specified interval will be hidden. A summation level corresponds to a hierarchical level (for example, material level). Summation level 1 is the lowest hierarchical level. Summation level 2 is the next level up, and so on. The individual values are on the summation level 0.
    The summation levels can be specified both universally (for the entire report) or locally (for specific blocks of rows). In this case, the local settings overwrite global values.
    Report views:If a report is displayed on the screen, the Report Writer will then set page breaks so that exactly one page fits into the current window. This view will be defined as the standard view. As the Report Writer always processes exactly one page, you can only use the page keys and page icons to page up and down; the scroll bars cannot be used.
    The page view can be determined via Settings-> Page view. The page breaks in the page view correspond to those defined in the report layout.
    Hide and show rows:The function Edit->Hide rows exclude certain preselected areas of your report from the display. You can undo this command with Edit ® Show rows.
    Expanding and collapsing report rows:View-> Hierarchy->Collapse allows you to hide the report rows of the sub-trees that are located underneath. View->Hierarchy ->Expand allows you to undo this command level by level.
    If you want to display all the report rows that were hidden by collapsing the hierarchy or restricting the summation levels, select, View->Hierarchy-> Expand all.
    View->Collapse all allows you to reduced every row block to the highest summation level.
    Texts and Annotations:You can create an annotation for your report.
    Select: Extras->Annotation.
    You branch into the text editor of the Report Writer.
    Via the menu sequence Settings->Texts, you can create and format a title page, the last page, as well as headers and footers using word processing functions.
    For example, you can store variables in the header for the author of the report, the date of the selection or the name of the person who last changed the report.
    Layout parameters:Using the menu sequence Settings->Layout you can specify the page format, display form, rows and columns of the report according to your needs and you can determine the settings for the graphics function. You can make these layout settings with Report->Save settings.
    Hope I had been able to help you to some extent. please assign points as reward.
    Rgds
    Manish

  • Creating Tcode for report painter program in 4.0B version?

    hi all,
    How to create a tcode for report painter program in 4.0 B?
    I searched the forums. but i couldn't find the same for 4.0 B?
    Please helo me to solve this?
    Thanks,
    Vamshi

    I am closing as no one answered and worked in alaternative way for the requirement.

  • Assign Transaction Code for Report Painter generated program

    I am trying to assign a transaction code for report painter generated program... I assigned the transaction code in Development for the generated program but the program name changes in every system and I get a runtime error...
    Can you please guide me on how to handle this problem

    http://dap-consulting.com/yahoo_site_admin/assets/docs/Report_Painter_Reports.47142031.pdf
    Found my answer in the above link

Maybe you are looking for