SAP upgrade to address 999 issue ?

Hello All..looking for some insight and help!
I was told (can't verify) that the new release/upgrade to SAP would be addressing the issue (that I KNOW everyone has run into) of the 999 line limitation on Journal Entries.
Does anyone know if this is TRUE? when is the potential roll out? I can not find anything to verify this - and currently the work around is gruesome to split large files.
ANY INSIGHT would be appreciated...

HI,
Still in higher versions also There is a limit of (999) line items which can be posted per FI document. This is because the line item number (BSEG-BUZEI) field length is defined as (3) numeric positions, i. e., (999) line items.
The most commonly used workarounds are as follows:
1) Implement FI summarization (per note 36353). But as you wrote, you cannot accept this kind of solution.
2) Cancel the original billing document and split it into smaller documents using different payment terms but actually with the same terms.
This will avoid the (999) line item limit for FI postings. notes 11162 and 111813 with reference to invoice splitting.
Please assign points if it useful.
Regards
Ravinagh Boni

Similar Messages

Which SAP products would address these issues

Dear All,
We have implemented ECC 5.0 version of SAP in feb 2006, we are evaluating Hyperion for the undermentioned management requirements
1) Business Planning
2) Balance Scorecard
3) KPI Reporting and Strategic management
4) MIS Reports ( yeraly/halfyearly/Quarterly/monthly/ daily)
5) Profitability Analysis & Simulation
We are in talks with SAP implementation partners also , but we are not sure how SAP currently fulfills all the above requirements ?
In ECC 5.0 we have licenses for BIW 3.5 and SEM, the doubts are
1) Which has better product features SAP products or Hyperion ?
2) Which is the most cost effective solution especially for us since 95% of our data is in SAP ECC 5.0 ?
3) Which additional Licenses we will have to buy to get the best features ?
4) What hardware requirements will have to be fulfilled for above management requirements. ?
Detailed answers are welcome.
Regards
Milind Nair

SSM for the balanced scorecard
BPC for high-level, top-down planning and mutli-year projections
PCM for accurate, bottom-up operational cost and profitability managment, also for simulation of cost changes, activity / quantity changes and impact on product, customer or segment profitability
They are all part of SAP's latest EPM suite

SAP Upgrade issue ABAP-PI Proxy error

Hi Guys,
We have an issue in SAP R3 system after the recent SAP upgrade.
The proxy programs in R3 were using SAP Standard structure in their development.
Standard structure : SAPPLCO_LOG_ITEM_CODE (TYPE SAPPLCO_LOG)
And so after the upgrade, There seems to be a new field added in the above standard structure and hence causing mismatch between the proxy program developed internal structure to the SAP standard structure.
We come to understand that this Standard structure is being used from SAP PI, Software component SAP APPL.
So SAP PI has old SAP standard structure and SAP R3 has new standard structure with additional field.
Can you please suggest how to overcome this issue. We have also raised an OSS ticket to SAP.
Kind Regards
Rajesh.S

Hi Harald,
Thank You for the information. I was able to download SAP_APPL 6.06 content from SAP service market place. Here We have a doubt before importing the new SAP APPL content. In market place downloads under SAP_APPL 6.06 we were able to see few many database downloads with last changed at 3.04.2014.
Our EHP upgrade for SAP_APPL is 6.06 , SP level 0007. So we should download / import the highlighted content version (SAPAPPL60607) in the screenshot from market place or download / import the latest change under SAP_APPL 6.06 download patch ? Kindly let us know.
Best Regards,
Rajesh.S

Upgrade Default Address Lists from LDAP

Hello,
I migrated from MS Exchange 2003 to 2010 some time back. Currently trying to upgrade the address lists as per the guide here:
http://technet.microsoft.com/en-us/library/dd351283.aspx
When I run
Set-GlobalAddressList "Default Global Address List" -RecipientFilter {(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass -eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass -eq 'publicFolder'))}I get the following error:what should I do? Thanks.

Hi Birenc,
the default Global Address List can be modified during the conversion from Exchange 2003. You won't be able to do it after that hence the error message.
1- Run Get-GlobalAdressList | fl and check the IsDefaultGlobalAddressList value. I believe in your case this would be False.
2- To change this you would need to change the msExchRecipientFilterFlags attribute. you can do this via ADSIEDIT. Open ADSIEDIT connect to the Configuration container. Find the Default Global Address List and change the above attribute value from 3 to
0 and apply the changes. Then change it back to 3 and apply changes.
3- Run GlobalAdressList | fl again and the IsDefaultGlobalAddressList value should now be true.
This should fix your issue.
ecsword

TS1398 Got the dreaded no wifi on my wife's iPhone 4S. Wifi greyed out and no luck with the reset network instructions. Why isn't Apple addressing this issue? We are a family of Apple product users, 2 ipads, an ipad mini, 4 iPhones but one isn't working!

Got the dreaded no wifi on my wife's iPhone 4S. Wifi greyed out and no luck with the reset network instructions. Why isn't Apple addressing this issue? We are a family of Apple product users, 2 ipads, an ipad mini, 4 iPhones but one isn't working! Issue began whenwe upgraded the operating system.....
Come on Apple.....get this issue sorted out!

Just out of warranty. This is a software issue. everything was ok until the software update. Apple just need to sort it out.

I updated to iTunes 10.5 on Vista. As with iTunes 10.0, The DEP will not allow iTunes to open. WHEN IS APPLE GOING TO ADDRESS THIS ISSUE? I can't update my telephone or iPod. I can't even open the iTunes program!!!

I am sick of dealing with this issue. I wish not that I had never even started using any Apple products, beginning with iTunes. WHEN IS APPLE GOING TO ADDRESS THIS ISSUE AND MAKE ITUNES SOMEHOW COMPATIBLE WITH DEP IN WINDOWS VISTA?
That being said, Is there any way to resolve this? What I did in the past is completely wipe ALL Apple files from my computer, and install an older version of iTunes. It was at least functional. It seems that any version of iTunes 10.0 or more recent is not compatible with the Data Execution Prevention in Windows. You can not remove iTunes from DEP, yet DEP prevents iTunes from running.
The down side is that I can't get the latest updates for my iPhone or iPod. Now, I have a new phone for my husband that needs syncing on my iTunes, and I can't do that because iTunes won't even open.
Can somebody help me out with this, please?

OK, lets do a complete overhaul to make sure it's working ok.
First to check your Windows system file for any corruption:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer.
Start iTunes and see if it is ok.
If it doesn't, will have to go through the whole process of uninstalling and installing acccording to the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
(Referenceinstructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components)
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Apple, please address this issue!!! Searching and special characters

I've found at least one other topic here regarding this issue, but Apple has yet to address it, or even confirm that it's in fact an issue.
A big portion of my library consists of international artists, many who have special/nonstandard characters in their names (e.g. "Tiësto"). In previous versions of iTunes, I could search for "Tiesto" (note the absence of the umlaut over the 'e') and all of those tracks would appear. However, after upgrading to iTunes 9, I'm forced to search for "Tiësto" in order to view those tracks.
Thinking about this issue, it would seem that this is normal behavior, as an artist named "Pàz" isn't necessarily the same as "Paz". But the reality is that NO ONE wants to take the time to search for the alt-code of a special character, and then type it in. Additionally, most people (including me) have a number of reasons for not renaming the artist to conform to standard characters.
Clearly, something has changed between iTunes 8 and 9. And it's incredibly frustrating. A big chunk of my library is virtually inaccessible to me now, unless I search for terms that don't contain special characters.
Apple, **PLEASE** address this issue. I'm not the only one with the problem and it's become a huge pain in my side to have to work around this.

I don't see how it's sloppy or why there should be any reason that it shouldn't have given you both.
Even putting aside that gracenote and others don't have consistent spelling in their databases, that when you download from the iTunes store, who knows what you're going to get, so that one's library could be all over the place and one might not even notice it, accents and other markings don't change the fact that a u is the same letter as ú.
Yes, it's pronounced different. Yes, the difference is very important. But it's the same base letter. And even if it's considered a different letter in another language, in English we have 26 letters and all the accents and tildes and umlauts don't make them a new letter, which is what we're talking about here.
It's a huge pain that looking for an album that has "Zürich" in the field and I type in "Zurich" I can't find it. I have to think about if I really do have that album, maybe I deleted it by accident, etc. And then I think to type "rich" and then it pops up.
That's way too many steps. I don't know keyboard shortcuts and I don't want to learn them. In English, it should be letters, not characters, that count.

When is the next ios update and will it fix/address the issue with photos not being shown in chronilogical order?

when is the next ios update and will it fix/address the issue with photos not being shown in chronological order?

All of us here are users just like you. We have no inside info of when Apple products or operating system updates/upgrades will be released. The next iOS may not even change the issue you have.
 Cheers, Tom

Need help in Address inconsistency Issue.

Hi Folks,
Need your help in this Issue.
We are getting an Error ---- "Person-address" data doesn't exist while correcting the Address inconsistency through transaction BP in SAP SRM 7.02.
Kindly suggest any SAP notes on this specific issue.
Regards,
SRM User.

Hello Keith,
Yes, I have 2 structures in the Query, with Posting periods structure is in the rows restricted by periods and Key fig structure.I did the way you said, but it is not working.
Regards,
PNK

SAP upgrade - questions for report painter and query

Hi Experts,
I have two quwstions of SAP upgrade.
My requirement is: SAP upgrade from 4.6B to ECC 6.0 with non-unicode.
1.Does SAP upgrade influence the report painter? If influence, could you tell me what should I do for this case.
2. We have so many queries (SQ01) in our system and many of them haven't been run for a long time. we need a tool to get the runtimes of queries in a certain durition.
For example: From 2008/01/01 to 2008/03/31,I want to know how many queries had been run/ query name/ runtimes of each query.
Best regards,

> 1.Does SAP upgrade influence the report painter? If influence, could you tell me what should I do for this case.
You can check
Note 1155524 - ReportWriter: Upgrade Issues ECC6.0 -Common Customer Issues
> 2. We have so many queries (SQ01) in our system and many of them haven't been run for a long time. we need a tool to get the runtimes of queries in a certain durition.
Such a tool was RBE (Reverse Business Engineer) - which is out of support.
You can try to get that information from ST03. If that is not enough there's no other way than booking an SLO service to find out the queries that have not been used (http://service.sap.com/slo).
Markus

Address printing issue in SAPSCRIPT

Hi All,
I am getting address printing issue in address in sapscript .
Here is my address format in the script.
/: ADDRESS DELIVERY PARAGRAPH ZA LINES 10
/:    TITLE                &KNA1-ANRED&
/:    NAME               &KNA1-NAME1&, &KNA1-NAME2&, &KNA1-NAME3&, &KNA1-NAME4&
/:    STREET            &ADRC-STREET&
/:   LOCATION        &ADRC-STR_SUPPL1
/:   POBOX             &KNA1-PFACH& CODE &KNA1-PSTL2&
/:   POSTCODE       &KNA1-PSTLZ&
/: REGION              &KNA1-REGIO&
/: CITY                   &KNA1-ORT01&, KNA1-ORT02&
/: COUNTRY          &KNA1-LAND1&
/: FROMCOUNTRY &T001-LAND1&
/: ENDADDRESS
Here in the above code I had added LOCATION and modified the STREET field value.
Moved the changes to QAS server along with the driver program., confirmed all the related transports are moved.
While testing in QAS , i noticed that after LOCATION print I am getting blank space and then the remaining fields are printed.
For example:
     casa velas boutique hotel
     Attn: Marie John
     AV. cocoterosss
    63550 Nuevo Vallarta, Nayarit,
    MEXICO.
In the above example the third line the LOCATION data.
The surprise here is that I am not getting blank space in DEV , I had checked all the transports, and all are ok.
Please advice me where I am wrong, ie why i am getting blank space in QAS whereas it not showing in DEV.
Thanks in advance.
Vengal Rao.

Hi Jay,
I fully agree with you that the address printed will be as per SAP standards.
Currently I am looking into the country configuration in DEV - I hope may be the reason,
I have to use the existing ADDRESS....ENDADDRESS format as our client is using 4.6 version, he just print the financial reports using the common script.
So anything away from the orginal one may lead to more trouble in other reports.
Once I get a reason behind the issue, I shall definetly post them.
Thanks,
Vengal Rao.

Problem realted to SAP upgrade

Hi all,
Can someone help me identifing the issues realted to SAP upgrade(eg - 4.7 to 5.00)
Regards,
Kartavya

Did you check out the Upgrade tools available at the <a href="https://websmp108.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000497720&">SAP Service Market place</a>
~Suresh

SAP Upgrade - Features

Hi,
We are working in a sap upgrade project ECC 5.0 to ECC6.0. We have found a issue in the features ( PE03) after the upgrade of the dev system. The modifications done to the features has now been overwritten by sap.
eg: The dates maintained in the Feature GBCHG - decision tree nodes are not the same before and after upgrade.
1. Are changes to features captured in SPAU/SPDD or what is the way to find out which/what features need to be adjusted again ?
2. Are there any other sap hr objects configurations which needs to be taken care similar to features?
Thanks
Jagruthi

@ Jagruthi:
Hmmm, have you checked the overall structure of the Feature in QA using PE03. A lot of implementations change the way a structure is used to assist their configuration.
When you are in PE03 click on Attributes to look at the author of the changes for the Feature. This is seen on the Administrative Data box (bottom of the page). Notice if Last Changed is a User Name of a company user instead of SAP.
Also when you're in this view, review the actual structure to determine if the same Structure and fields match what you have in DEV.
I really doubt SAP has changed the Feature from ECC 5 to ECC 6. It is much more likely someone has reconfigured the Feautre a long time back.
Cheers, Al

SAP upgradation ?

hii
What will be the major work for MM consultant in SAP upgradation (4.5 to ECC 6.0).
What is the latest version of SAP??
Explain in more detail about MM consultant roles and responsibilities n SAP upgradation (4.5 to ECC 6.0).
Thanks

Normally upgradation project is basis driven project. Basis guys will prepare the system taking into consideration of all the aspects of the system. This itself is project called upgrade. Upgrading project mostly involves testing with the existing system with the new system. SAP already released the release notes for this Upgrading ECC 6.0{example 4.6C to ECC 6.0}. (1).Functional consultant have to do unit test/Integration test/Regression test in new system based on the business process documents prepared for your present system. (2).Functional consultant mostly encounter Interface issues (If exist)/Authorization issues/Enhanced naming issues/Usage issues. (3).Example:In older version you have to do external configuration for CIN. However .In ERP 2005, It is already in built. Hence Knowledge of CIN will be more than sufficient to manage the CIN issues. (4). More over Functional consultant must be very confident in the business process. Unless you will receive many UAT issues. (5). Whenever Functional consultant do unit test and Integration test, use user id to.When you do regression testing, get the user id from user copy all the roles from the user id and create new id. Using this new id you do the Regression testing. This will avoid many problems. (6). Another Important, big issue is patch work information. For example After release of 46C, SAP released many patches for 46C.However these patches are all not updated in to your present 46C system. These patches are already in built in ECC 6.0, hence you will get diff.result when you do testing. If such a case, advices the user about the patch work, and proceed. In most of my cases, SAP enjoyed with 46C without patch scenario, but in ECC6.0 they started to complain, b'cas the new patches.
Check this link for further details:
Re: upgrade from 4.7 to 6.0
Edited by: Afshad Irani on Aug 9, 2010 11:35 AM

SAP Upgrade Templates

Hi
Can any one send me the templates that are used for an SAP Upgrade project.The kind of templates i need for Change request,Project issue,Upgrade Checks and other......
If you have any other templates regarding Upgrade project, kindly mail to my e-mail id:[email protected]
Thanks in Advance
T.Ram

Hi,
Please follow the below mentioned link. You will get clear understanding about the upgrade here..
https://wiki.sdn.sap.com/wiki/display/HOME/ERP2005+Upgrade
Incase of any specific requirement, please get back.
Regards,
Imran

SAP upgrade to address 999 issue ?

Similar Messages

Maybe you are looking for