SAP user ID for Schedule test

I certify in BOCP, when I try to schedule a test, you are prompted, SAP ID as I am an independent consultant for a SAP ID?

Hi,
try your S-User from the SMP.
If this doesnt help go to http://www.vue.com/busobjects/ under "Exam Registration & Scheduling Information"
Regards
-Seb.

Similar Messages

EREC : Lock SAP user ID for future date

Hi ,
Can anyone suggest a way to Lock an SAP user id for a Future Date .
Thanks in advance,
Tk

Hi,
Instead of locking you can better delimit so that you can have a history for audit reasons.
i dont find business requirement for locking user.
thanks
rafi

SAP user guide for change request management 4.0

Hi,
does anybody know where i can find SAP user guide for change request management 4.0?
Thanks in advance..
MERAL

Hi
You can use this as a reference
Regular corr
https://websmp201.sap-ag.de/~sapidb/011000358700000872582009E/index.htm
Urg corr
https://websmp201.sap-ag.de/~sapidb/011000358700000872612009E/index.htm
Hope it helps
Regards
Prakhar
Edited by: Prakhar Saxena on Oct 15, 2009 10:05 AM

BADI or User Exit for scheduling in MRP

Hello,
I am searching a possibility to influence the scheduling of planned orders, when they are created in the MRP run. There exists a BADI which is called when creating planned orders manually, but not in MRP. Its name is MD_PLDORD_SCHEDULING
Does anybody know about such an alternative for scheduling in MRP?
Thanks in advance
Roland Böhm

Hi,
Check these Enhancements
LMDR2001 User exits restr. profiles of opt. pur.ord.-based load bldg
LMDZU001 User exits in additional planning
Regards,
Satish

User exit for scheduling agreements (ME31L)

Hi,
Is there a user exit for entering default values in scheduling agreements (either at header and item level)?.
Best regards,
Jose

Hello,
Check withthe following exits available
customer-function '010.
CUSTOMER-FUNCTION '011'.
Regards

Error while scheduling report for SAP users

Hi All,
We have SAP authentication enabled in our BO environment. (BO XI 3.1 sp2 FP 2.6 on windows 2003 server).
There are some webi reports based on BW Bex queries that we are trying to run on behalf of certain SAP end users. This we are doing using "schedule for" option.
Now what is happening here is if the end user has logged in once in BO system ,it runs fine. But in case user has not logged in to BO (using infoview etc.) ,it throws error saying "incomplete logon data" . Also if user changes or reset his password in BW and if he doesn't login to infoview after that ,system throws another error "Name or password incorrect (repeat logon)".
Based on these observation, we are suspecting if BO system uses stored SAP users credentials while scheduling report for them based on their last login.
Would like to mention here that we have checked option "automatically import users".
Please advice if this behavior is normal or we are missing some setting.
Thanks in advance,
Chandra

Hi All,
Any pointers or suggestions for this issue ??
Is there a setting/option avialable in CMC which could resolve these errors.
Or, user has to login once to infoview in all circumstances to avoid these errors.
Thanks,
Chandra

Authorizations for Profit center in a query for a TEST user

Dear SAP BI Gurus
I have a query which has to be tested by the different user based on the region & the profit center that they belong to in SAP BI 7.0
for this i have to create a user id for the test user under he/she should be able to view only his/her profit center data.
The following are the steps that i tried out.
1.created a role .
2. in the change role - authorization , i have added authorization object "ZPROFIT" to the RSR . & restricted the ZPROFIT for the given values of the profit centers.
3. Added this role to the User ID.
But still the user is able to view all the profit center in the query.
This is bugging me up.....
Can anyone help me out.
Best Regards,
Ramesh

Dear chetan/ravi
i did create all the authorization objects & filled in the values in them.
Also a authorization variable has been created in the Query.
But i dont know how this variable has to be linked to the Auth Objects in Rsecadmin.
Can you explain me the steps involved in it.
Best Regards,
Ramesh

Need details for SAP USER-ID

Dear All,
I am Chartered Accountant and having 2 years of domain experience. I have completed my training from a small institute that is not SAP partner. I have very good hold on SAP FI and CO modules and want to appear for SAP FI certification. I DID SELF STUDY AND I AM TOO MUCH CONFIDENT ON THE SUBJECT.
But for appearing any SAP certification I need SAP USER-ID. I DON"T KNOW HOW CAN I GET IT IF I AM INDIVIDUAL CONSULTANT??
Exam Registration & Scheduling Information
Registration for SAP certification exams taken at Pearson VUE is a simple 3-step process:
1. See information below for details on obtaining your SAP User-ID.
2. Create your Pearson VUE web account (SAP user id from step 1 will be required)
3. Register for the exam
All exams require the use of the SAP user id for proper tracking in the SAP Certification System.
CUSTOMERS / PARTNERS / INDEPENDENT CONSULTANTS:
If you have previously taken an SAP exam or attended SAP training, go directly to step b, otherwise, customers and partners should access visit the Service Marketplace to register for your S-user number. Independent consultants, as well as Customers and partners having questions or problems regarding this step, should use the following contacts:
1. North America: Tel: +1 888 777 1727.
2. For all APJ countries excluding Japan: education.apa at sap.com or tel: +65 62 708188
3. For Japan: training.japan at sap.com or tel: +81 3 3273 7070 (9:00-17:00 in Japan local time)
4. For all other countries please navigate to the appropriate country on sap.com/services/education and contact your local Education Department.
CALLING ANY OF ABOVE NUMBER DOESN;T HELP. THEY DON;T REPLY OR CALL WAITING AND ALWAYS WAITING. I HAVE ALREADY SPENT AROUND FEW THOUSAND ON MAKING CALLS ON THESE NUMBERS.
COULD ANYONE OF YOU EXPERTS HELP ME IN APPERING FOR SAP FI and CO CERTIFICATION? I HOPE THERE WILL BE A WAY TO APPEAR FOR CERTIFICATION EXAM WITHOUT USING SAP ID or ANY TRAINING CENTER WHO PROVIDED CERTIFICATION FACILITY WITHOUT ATTENDING THE TRAINING.
AWAITING EXPERTS FEEBACK ON THIS ISSUE.
Thanks,
Manu Rathore
Moderator message: please do not use all upper case in the future.
Edited by: Thomas Zloch on Nov 29, 2010 11:09 AM

Hi
Elgibility for Certification:
You should either complete your training in any Authorized Training Center or Should have experience of more than 2 years(not sure if it is 2 or 3 now) in the said module.
If you dont have any of the above, then certification wont happen in India.
Vishwa.

Sap license keys for Test Landscape

Hi,
Sap R/3 Enterprise - 4.70
We have created a test Sap Landscape for testing Backup & Recovery. We are experiencing licensing issue when trying to log onto the test Landscape because the hardware key has changed.
We have raised calls with Sap, but as yet have not provided a working solution.
What would happen if I generated a new license on Sap Market Place for the test hardware as a temporary Measure?
Would it cause problems with our Production systems, because the license key on Sap Market place would not match the one installed on our productiion system?

Thanks for your advise, but my Sid is the same. We have build a full test landscape, on a different network. I have tried to create a new license on Sap Market place, but this is not possible. I have rang the Sap Help desk - only to be told that I must create a customer message, which I have, but after 3 weeks of trying they still have not found a solution.
I was just wondering what problems I would have if I changed my Live details on Sap marketplace to the test machine details - just so that I can generate a new license key, and then change it back. Don't know what implications this would have?
Regards
Vickie

SAPSCRIPT for Scheduling Agreement

Can anyone tell me , what is the SAP form name for Scheduling Agreement and also the Output type for the same.
Kindly do the needful.
Thanks in advance.
Regards,
Shankar

Is it purchasing SA? use sapscript MEDRUCK and output type NEU.
Form: ENTRY_NEU Program: SAPFM06P
Regards
Sridhar
Message was edited by: Sridhar K

Workflow Administrator SAP user Role

I have a question from the customer regarding which SAP User Role should be assigned to and Workflow Administrator?
From my point of view, basically there are 2 questions here:
1. Is there any standard SAP user Role for this? (which one?)
2. If not, then a custom Role need to be configured (from PFCG t-code i think). Can anyone tell me to which workflow transactions should be ground authority for such a Role?

Hi
These are the tcode for workflow developer. Use the SW* and pfac_dis,PFTC_DIS for wflow admin.
SWL1
SWLV
SWNNOTIFDEL_DISPLAY
SWPC
SWPR
SWU0
SWU1
SWU2
SWU3
SWU4
SWU5
SWU7
SWU8
SWU9
SWUD
SWUG
SWUI_BENCHMARK
SWUI_VERIFY
SWUI_WFUNIT
SWUS
SWUS_WITH_REFERENCE
SWU_EWBTE
SWU_EWCD
SWU_EWLIS
SWU_OBUF
SWWDHEX_DEBUG
SWWERRE_DEBUG
SWW_ARCHIV
SWW_DISPSWWCLEAR
SWW_DISPSWWCOND
SWXML
S_ALR_87000710
S_ALR_87000878
S_ALR_87000881
WF_EXTSRV
RSWWERRE
SBWP
SCDO
SLG1
SWB_COND
SWDA
SWDB
SWDC_DEFINITION
SWDD
SWDD_CONFIG
SWDM
SWDS
SWE2
SWE5
SWEAD
SWEC
SWEINST
SWEL
SWELS
SWEQADM
SWEQBROWSER
SWETYPV
SWFVISU
SWF_ADM_SUSPEND
SWF_ADM_SWWWIDH
SWF_APPL_DISPLAY
SWH_EXIT_DISPLAY
SWI1
SWI11
SWI13
SWI14
SWI1_COND
SWI1_RULE
SWI2_ADM1
SWI2_ADM2
SWI2_DEAD
SWI2_DIAG
SWI2_DURA
SWI2_FREQ
SWI30
SWI5
SWI6
SWIA
MCAP
MCAQ
MCAR
MCAT
MCAU
MCAV
MCAW
MCAX
MCAY
MCAZ
MCKY
MCKZ
MCM+
MCM-
MCM/
MCM?
MCSW
MCSX
MCYY
PFAC_DIS
PFTC
PFTC_DEL
PFTC_DIS
PFWF
PFWS
PGOM
PPMS
PPO4
PPOS
PPSS
PPST
PSO3
RE_RHCHECK1
RE_RHCHECKV
RE_RHDESC10
RE_RHEXIST0
RE_RHNAVIG0
RE_RHRHAZ00
RSWEWWDHMSHOW
RSWEWWDHSHOW
RSWWCLEAR
RSWWCOND
RSWWDHEX
BSVW
MC01
MC02
MC03
MC04
MC05
MC06
MC07
MC08
MC09
MC18
MC19
MC20
MC21
MC22
MC23
MC24
MC25
MC26
MC93
MC94
MC95
MC?0
MC?1
MC?2
MC?3
MC?4
MC?5
MC?6
MC?7
MC?8
MC?9
MCAF
MCAH
MCAI
MCAJ
MCAK
MCAL
MCAM
MCAN
MCAO

The user session for a SAP GUI for HTML could not be created/generated.

Hi,
May I know what could be the issue for the above issue?
We are trying to request for a ITS in a c#.net program with the following codes.
HttpWebRequest request = (HttpWebRequest)WebRequest.Create(strURL);
request.Method = "Get";
request.ContentType = "application/x-www-form-urlencoded";
HttpWebResponse response = (HttpWebResponse)request.GetResponse(); <<<<<< This line is throwing error >>>>>>
Stream responseStream = response.GetResponseStream();
However, in our legacy system of classic ASP script, we are not encountering any issues and manage to get the response from the ITS. Accessing the url on IE is also working fine.
set xmlHTTP = CreateObject("Microsoft.XMLHTTP")
xmlHttp.open "GET", URL , false
xmlHttp.send()
str = xmlHttp.responseText
Any help is much appreciated.
Thanks.
Bertina

From the little information available here I can suggest following:
1.     Check the Account validity and authorizations of the User used for authentication from DOT NET. If possible, assign SAP_ALL in Development and repeat tests. Later we can narrow down the access easily.
2.     There is a known Kernel issue with ICF logon message handling, described in SAP Note 1241566 - Set of corrections: Logging on 1/2008. Check if the recommended Kernel patch level is already applied.
If none of the above helps, please send me the following:
1.     Trace file for the work process 0 in transaction ST11 on the application server spsisd_ISD_00
2.     Generate trace files with the highest trace level (3) as per SAP Note: 507994 - Generating plug-in trace files for troubleshooting and send it over.
We can look at various Kernel and Service level calls from trace files which should help us identify the root cause.

Best practise for SAP users who leave the company

Hi
Could anyone reccommend a best practise document or give advice on how to deal with SAP user ID's when employee's/contractors/consultants leave? I am the basis admin just starting an SAP implementation and we have no dedicated authorisation team at the moment, so I have been asked to look into this :
Currently we set the validity date in SU01 to the termination date.
We chack there are no background jobs scheduled under that user id, if there are, we change the job owner to a valid user (we try to run all background jobs under an admin account).
We do not delete the user as from an audit point of view I believe it restricts information you can report on and there are implications on change documents etc, so best to lock it with validity dates.
Can anyone advise further?
We are running SAP ECC 5.0 on Windows 2003 64 Bit/MS SQL 2000.
Thanks for any help.

Hi,
Different people will tell you different versions of what they believe is best practice, but in my opinion you are already doing reasonably well.
What I prefer is
1. Lock ID & set validity date.
2. Assign user to user group LEAVER or EXPIRED or something similar (helps with reporting) out of SUIM/S_BCE* reports.
3. Delete role assignment (should you need it, the role assignment will be in the change history docs anyway).
4. Check background jobs & act accordingly.
For ease of getting info I prefer not to delete the ID though plenty of people do.

Reg Super user for schedule background Jobs

Hi Experts,
I have created new user copied from DDIC with the same authorization. This is for scheduling Background Jobs. Now all the standard background Jobs are running fine. After scheduling the Jobs I have changed to system user. Now for audit purpose I need SAP note to do same. Please help me to get the sap note for the same. Please respond ASAP. treat this is as high priority.
Thanks & Regards,
Haseem.

HI,
It is not necessary for user having SAP_ALL authorization under which background job is running.
Define specific users to use for background processing. Define them as system users (non-dialog) and give them only the necessary authorizations that are needed for the executed programs
check http://help.sap.com/saphelp_nw04/helpdata/en/db/f6f3393bef4604e10000000a11402f/frameset.htm
also check Note 101146 - Batch: authorization object S_BTCH_JOB, S_BTCH_NAM
regards,
kaushal

Not getting BI query variable selection screen for few test users

Hi,
i am having problem when i am executing the reports. i am not getting variable screen for the test users ID's. but i am getting the screen when when 0BI_ALL authorization selected.
i want role based authorization, and not complete authorization.
the parameters in su01 are scl(X) and wlc(X X XX X)
Thanks,

Can you please check into Infoobject Maintenance screen in Bex Tab i.e. Query Execution Filter Value Selection. assign "Values from Masterdata Table".
Try again and let me know.
Nagesh Ganisetti.

SAP user ID for Schedule test

Similar Messages

Maybe you are looking for