SAP version 4.7 and ECC 5.0

HI Friends,
Could you plz help me out to know what are overall commonalities and differences and in view of SD module also in SAP R/3 Version 4.7 and ECC 5.0?
Thanks in advance.
Regards,
Vamsi P.

hi,
check this link http://solutionbrowser.erp.sap.fmpmedia.com/ u can get the delta here
saurabh

Similar Messages

Functional transactional difference between SAP version 4.7 and ECC 6.0

Hi Experts,
Can you Pls tell the Functional transactional difference between SAP version 4.7 and ECC 6.0 in case of Sales and Distribution module.
Like VA05n is one transactional difference,Pls tell the others?
Regards,
Rohan

Hi,
there are lot of changes like i observe
1, in rebates there is no advanced rebate processing in 4.7
2. there is no scale group field in condrecords of agrement in rebate agreement.
3. there are lot of new reports available in SIS
4. in sales returns process also seperate config available in 6.0
regards,
sk

Difference between SAP version 4.7EE and ECC 6.0.

Hi All,
Could you please tell me the major difference between SAP version 4.7EE and ECC 6.0? Also let me know why the industries should go for ECC 6.0?
Waiting for an early response from you.
Thanks a lot in advance!

http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
Please use above mentioned link, you will find the delta functionalities between various SAP Versions.
Regards,
Ravi

What is the difference between version 4.7EE and ECC 5.0

DEAR EXPERTS
what is the difference between version 4.7EE and ECC 5.0?WHAT ARE THE ADDITIONAL FUNCTIONALTIES IN
ECC 5.0?

hi,
Diff between 4.7 and ECC 5.0:
1. 4.7 is on R/3 platform, while ECC 5.0 is on mySAP ERP 2004
2. ECC 5.0 is having ESA(enterprise Serviceoriented Architecture)
3.ECC 5.0 is web enabled with Netweaver technology.
mySAP ERP is the "newer" ERP with numbering conventions like ECC (which stands for ERP Central Component) 5 or 6
mySAP (aka mySAP.com) Business Suite contains Solutions like CRM, SCM etc. The important thing to note here is that this contains mySAP ERP, the one above
mySAP All-in-One Solution is designed for smaller companies (the ad that says SAP is not just for large companies but for great companies where the above mentioned functionality is scaled down and is made to run on one database on a PC type of setup as opposed to the full blown architectures on which SAP traditionally set to run

From ABAP view, what is the difference between version 4.7 and ECC 6.0 ?

Hi,
I am a ABAP developer. I want to know the difference between version 4.7 and ECC 6.0 from a programmer
perspective.
I also want to know what is obsoleted and what is enhanced.
Thanks.
Best Regards,
Chris Gu

I'm not sure if any of this is in your 4.7 version, but I know it wasn't available in our 4.6C before we upgraded and we have found the following extremely helpful in ECC 6.0:
1. The new ABAP Debugger - Search SDN and you'll probably find a bunch of info on these enhancements
2. The Enhancement Framework - this is a great new framework allowing enhancements to standard SAP programs without having to use "core Mods". Had we known about it prior to our upgrade, we could have probably eliminated 75% or so of our custom Z Programs which are copies of standard SAP code and 100% of our core mods (of which we only have a handful)
3. Code Inspector and more importantly the ability to turn it on to automatically run when releasing a transport.
4. The ABAP workbench has changed a bit with a new editor including some minimal code completion.
5. Automatic generation of services from any remote enabled function module.
These are just a few of the things that I've found helpful in an upgraded environment.

Obsolete Keywords from SAP version 4.6C to ECC 6.0

Hi ,
I want to upgarde my sap system from version 4.6c to ECC 6.0.
Can anyone provide me the list of obsolete keywords that are in 4.6c and the new keyword for tht in ECC6.0?
Thanks in advance

> Can anyone provide me the list of obsolete keywords that are in 4.6c and the new keyword for tht in ECC6.0?
Read
Note 367676 - Release upgrade from 4.6 to 6.10 for customer programs
Note 689951 - Release upgrade from 6.20 to 6.40 for customer programs
Note 857904 - Upgrade from Release 6.40 to 7.0:for customer programs
Markus

Functionality Differences between versions 4.7 and ECC 6.0?

Hi All,
Can anyone tell me what are the main functional differences between 4.7 and ECC 6.0? What is the release date/year for ECC 6.0.
Regards,
MD.

Hi.
1) ECC is more towards OOPS concepts.
2) It has new debugger,
3) New Enhancement Framework is introduced in ECC.
4) ECC contains many more badis.. in some functional areas such as HR.
5) Its more efficient to use Adobe forms in ECC.
6) Some of the fields and tables have changed in ECC.
http://solutionbrowser.erp.sap.fmpmedia.com/
http://www.sap.com/services/servuptech/bestpractices/index.epx
Solution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
ECC 5.0:
http://help.sap.com/saphelp_erp2004/helpdata/en/c6/feda40ebccb533e10000000a155106/frameset.htm
You can find the difference in release notes of each SAP version.
Here are the links.
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Regards,
Srini Nookala

Differences between version 4.7 and ecc 5.0

Hii sap gurus,
Can anyone tell me the difference between environment 4.7 and ecc 5.0 (FICO).
I have seen the links such as , http://solutionbrowser.erp.sap.fmpmedia.com
It would be great if someone can jot down the differences..
Thank you

Hi,
Please go through the Release Notes of ECC 5.0. You can download the releases notes from SAP Service marketplace.
Regards
Mahendra

Input Tax - difference between sap version 4.7 and version 5

Hi All
I done total customising of input tax on sap version 4.7 as well as version 5.
now I want to enter following invoice through t.code F-43:-
   Raw Material Cost                           50,000.00
Add:- Excise                                       8,000.00
Add:- E.Cess                                          240.00
Add:- Vat                                             2329.60
So we are to pay to vendor Rs. 60,569.60.
Now when use sap version 4.7 & run t.code F-43, then if I enter Rs. 60,569.60 against g.l of vendor & purchase, then system accept it.
But when I use sap version 5 & run t.code F-43, then I have to enter Rs. 60,569.60 against g.l of vendor & Rs. 50,000 against g.l of purchase, then only system accept the entry.
why so. Plz clarify
With Regards
Deepak Garg
Mob 9213784161

Hi,
there are lot of changes like i observe
1, in rebates there is no advanced rebate processing in 4.7
2. there is no scale group field in condrecords of agrement in rebate agreement.
3. there are lot of new reports available in SIS
4. in sales returns process also seperate config available in 6.0
regards,
sk

Differences between SAP Retail Store version 4.7 and ECC 6.0

Hello all,
Anyone know which are the main differences between these two versions?
Any gap in the new one?
Thanks
Raquel

Hello Raquel,
Since 4.7, there were some enhancements with EHP2, EHP3, EHP4, and will there be with EHP5. It is not easy to summarize some years of development in a few sentences. I think it would be helpful to read the release notes, or to read the online help documentation at http://aiokeh.wdf.sap.corp:50000/SAPIKS2/contentShow.sap?_SCLASS=IWB_STRUCT&_SLOIO=008AEF37516FDB2BE10000009B38F842&TMP_IWB_TASK=PREVIEW&RELEASE=6955&LANGUAGE=EN&_SEQNUM=0
Thanks,
Alireza

How to find the difference in BI Content between SAP ERP 4.7 and ECC 6.0

We are looking at upgrading our SAP system from 4.71 to ECC 6.0, and I have been tasked with determining what new data may become available in our BW system after the upgrade. I was wondering if there was a site that would tell me what new datasources/infoproviders are made available after an upgrade to ECC 6.0.
I do not need to see the list of all Business Content in ECC 6.0, just what has changed.
Also, the type of upgrade we are looking at performing is a "Technical Upgrade", which presumably just upgrades the SAP back end without affecting the front end. Can someone confirm that the new BW content will then be available after a technical upgrade?
Thanks
Michael
PS - our BW system has been on version 2004s for two years now.
Edited by: Michael Frank on Feb 3, 2010 3:07 PM

Hi,
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
-Vikram

Difference in workflow tables for the versions 4.6C and ECC

Hello,
Could someone please let me know as to what changes have been made by SAP in the workflow tables from 4.6c to ECC version?
Thanks,
Samson

Hi
Check these Tables
SWW_OUTBOX - Lists Workflows in outbox together with status
SWW_CONT - Container Contents for Work Item Data Container
SWW_CONTOB - Container Cont. for Work Item Data Container (Only Objects)
SWWLOGHIST - History of a work item
SWWORGTASK - Assignment of WIs to Org.Units and Tasks
SWWUSERWI - Current Work Items Assigned to a User
SWWWIHEAD - Header Table for all Work Item Types
SWW_WI2OBJ - Workflow Runtime: Relation of Work Item to Object
Regards,
Surjith

Tabulate the main difference in the SAP 4.6C Release and ECC 6.0

hi Experts
we all are using both the system and know that some additional functionality has been added to the newer versions of SAP.
Exactly we are sure to differentiate between step one version of SAP.
To give the clear feedback to our client who is already using 4.6C version and want to upgrade it with ECC 6.0.
Can some one give me the brief change in the functionality / changes happen in both the versions?
Your valuable reply give me a lots of support that where we attack in the implementation part to design same business functionality with the new upgraded enviornmrnt.
Thanks and Regards
Dilip Jain

I got it at SAP help site

Query for SAP NW 7.0 and ECC

Dear ALL ,
We have purchased SAP NW 7.0 License .We have installed it with 2 components WAS ABAP and WAS as JAVA.
Now my question is: this SAP NW 7.0 installation does not contain any functional module like SAP HR.MM,FI etc...
for this requirement do we need to take a separate license of SAP ECC or do we need to install some contentson this SAP NW 7.0 server so that we can run functional code on this server????
Please suggest....
Thanks
sandeep

Hi Sandeep.
The problem is not only the license, but also the application itself. If you have installed NW, your system don't have the tables and programs needed to execute business modules like FI, SD, MM, etc.
If you need those modules, you have to install an ERP 6.0 from scratch.
Regards
Francisco

Can SAP ECC6.0 SR2 and ECC 6.0 SR3 exist on the same landscape.

Dear Tech Masters.
I have done Heterogenous System Copy in Dev and QAS box in Landscape.
Source machine : ECC 6.0 SR2 on Windows 32bit. Oracle 32bit
Target System : ECC 6.0 SR 3 on Windows 64bit, Oracle 64bit.
Now I am going for production installation,
I got stuck with installation in production as I have source for ECC 6.0 SR2 for windows x64 only where as I have done system copy for DEV and QAS using ECC 6.0 SR3 media, though the source instances for Dev, Qas were ECC6.0 SR2.
Please suggest whether its possible to design the landscape with mix of ECC 6.0 SR2 , SR3. Please help asap.

Thanks a lot Vladimir, I am confident now ( technically ) to go ahead with SR2 installation in production.
In production, Should I make it up to the SP level with respect to QAS instance. ( QAS is ECC 6.0 SR3 -system copy ).
One more thing, If SAP will check our landscape, if they found it in this way..will that make any impact in SAP support in future.
Please suggest.
Rabi.
Edited by: RABI PAL on Jan 2, 2009 8:39 AM

SAP version 4.7 and ECC 5.0

Similar Messages

Maybe you are looking for