SAP VERSION FOR ITS

WHICH VERSION OF SAP DOES ITS MOBILE IS EFFECTIVE.
WE ARE ON SAP R/3 4.7 VERSION GOING ON UPGRADE FOR ECC 6.0

Hi,
Check this link..
https://wiki.sdn.sap.com/wiki/display/HOME/ITSmobile
Regards,
Narendra.

Similar Messages

What is the recommended version for ITS?

HI Experts,
what is the recommended versions for ITS?
We have SAP R/3 4.6c and WAS 6.40 ................what will be the recommened versions ITS for the above said SAP R/3 4.6c and WAS 6.40 combination...........
and also furnish the list of all versions of SAP R/3 ,WAS and ITS........
Higher points will be rewarded for useful inputs........
Thanks in Advance,
Shakthi

ITS 6.20 gets well with 4.7.. There was ITS 6.4 also released but there were some issues.. you can check the ITS release note from
https://service.sap.com/notes for more info.
Hope this helps
rgds

Shift+F2 not working in SAP GUI for ITS

Hi,
In my transactional iview (SAP GUI for ITS) , in one of the screens, shift+F2 is not working(Which in turn opens graph for the report) The same is working fine in SAP GUI for html.
How can i make this work?
Also, can i have a document with the comparision of SAP GUI for html & SAP GUI for ITS, specifying its advantages and dis-advantages as well?..
Pls treat this query as urgent and respond ASAP.
Thanks in advance,
Kavitha

ITS THE PROBLEM IN DEV NOT IN PROD ECC SYS

SAP Support for ITS version iViews on ESS

Hi All,
I heard that SAP will not be supporting all the transactions on Poratl used in ITS version from 2009 onwards. Is that true ?
Pls let me know ...!
Any support doc for this statement ?
Reagards
Vijay

Vijay,
What version of ITS are you referring to ? Standalone 6.20 or Integrated ITS?
Some transactions will probably not be supported as the integrated ITS has some limitations due to weblogic.
Ronald

SAP Versions for B1i

Hi all,
I tried to add new SAP versions (e.g. ERP2004, 2005) to the drop down list in landscape configurator in control center but they are not visible.
I added new modified xml files ( copies of R3.47.200.xml) to setup/com.sap.b1i.repository\SysType.xml folder and Patch folder too but nothing goes on.
I don't know, if it is important to change or add newer SAP Versions but I would like to do this because of better documentation.
Has anybody tried this successfully??
The workaround which is described in this posting: SAP Business One Integration Technology does not work for me.
Regards
Rayko

Hi all,
now it is official. I wrote an message to SAP support regarding this issue and the reply is the following:
sorry for the delay in getting back to you, I was double checking with t
he development department just to be sure of teh reply.
<b>Unfortunately ERP2004/2005 is not supported in the current release.</b>
It is very helpful to get information about inserting new entries in dropdown list of control center but they are for nothing because B1i does'nt support this SAP releases. Thanxx god I can connect to 4.6C ( which is out of maintenance) but not to the both newest releases of SAP ( ERP2004 comes up 3 years ago!!!)
Ok , 2 weeks of trying and working for nothing. It seems I have to wait nearly 2 or 3 years until our current SAP release is supported.
Thanxx Eddy for help. See you 2008
PS: on Cebit 2007 SAP sales team told me: of course ERP is supported!!

Supported SAP Versions

Hallo
Is there an document were i could found the supported SAP Versions for Version XI 3.1?
In the supported platforms document i could not find something (https://websmp202.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000726096&_SCENARIO=01100035870000000202).
Is for example SAP Rel. 4.6.c supported?

hi,
you can go to http://service.sap.com/bosap-support and take a look at the supported platforms per product. In your case the product is the SAP Integration Kit.
Ingo

User Exits or BADIs for MM41/42 in SAP Version 4.6b

My requirment is that when the user create a new article by MM41 or changes an existing one by MM42. Certain checks shoud be applied.
Checks required are:-
1)Articles should always have their Unit of Dimension as MM(other dimensions should not be accepted )
2)Articles should always have the volume unit as CCM(other volume units should not be accepted )
3)EAN numbers should be present only for Alternative Unit of Measures EA and OUT.
4)     The dimensions (Length, Width and Height) should always be double digits (should be more than or equal to 10)
I want to know by which User Exit or BADI (in SAP Version 4.6.b) can this be achieved.
Its very URGENT..Please help.
Many Thanks
Abhi

USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Transaction Code - MM41                     Create Material &
Exit Name           Description
MGW00001            Material Master (Retail): Additional Data
MGW00002            Material Master (Retail): Number Assignment
No of Exits:          2
Transaction Code - MM42                     Change Material &
Exit Name           Description
MGW00001            Material Master (Retail): Additional Data
MGW00002            Material Master (Retail): Number Assignment
No of Exits:          2
Rewards if useful.........
Minal

Roll back to standard SAP, after generating a new version for an interface

Hello all,
Somebody has modified one standard interface, and now a new version has been created with that user name. But, there is no difference between the old SAP version and the current active versioin (he/she has changed nothing). If i go and see the version management it is appearing like this,
X     Active    ..............   with that user name............
below which i have the standard SAP version like this,
.......................0.00.000. ...................... SAP
But, if i go and see the attributes for that interface, its showing
LAST CHANGED BY    ............................ SAP
how this can happen, when the active version is under a user name, but still the attributes is showing LAST CHANGED BY as SAP ????
one more question,
Now i want to revert my interface back to Standard SAP version, although there are no changes between the old and the current version. If i go and see the version management, it should show me only one version that too of standard SAP, like this,
X      Active...........................   SAP.
THe reason is, some body in future on seeing this interface should not think that this standard interface got changed.
Is it possible now? Please give me suggestions.
Thanks in advance

Hi ,
This currently seems like a bug , we have encountered this too.
work around is you have to delete the rtf files from server Siebel\client\temp\XMLP directory and upload them again so that they are not cached any more.
same on dedicated client you may have to delete relavant files form siebel\client\temp\xmlp directory and upload again.
Thanks,
Vamsi

How can we create Versions for Products in SAP CRM

Hi All,
We want use Product Versions in our CRM IC Webclient. We want to be able to select a product and then have a list of versions to pick from. Can anyone tell me if they have configured Versions for Products in their SAP CRM system. If yes, then how did you go about it.
Thanks,
Ramesh Nallabelli

Hi Arup and Shanthala,
Thanks for the prompt responses. Appreciate your help. We want to create Product versions like this: Product: Windows OS Version: 95, 98, XP, Vista, 7, etc.
When I try to create a configurable product, using the Configuration tab, to create or use a product model I see an error message: PME installation with errors The long text is: The environment variable PME_HOME that includes the PME application has to exist locally in order to start the PME from CRM.
This indicates the configuration of IPC in our CRM system. This is something that we have not undertaken so far.
When I use the Poduct Variants tab to create a product variant for a configurable product, I can't edit here. This view opens in a display only mode. After reading some more about this, It looks like variant configuration needs to be used in tandem with ERP variant configuration. There might also be a need to recreate this in the Java configuration engine. We are going to create these products in CRM only, so this might not work for us.
Regards,
Ramesh

Logical system for client 001 for SAP NETWEAVER ABAP TRIAL VERSION for BI

Hi,
I have installed SAP NETWEAVER ABAP TRIAL VERSION for BI. In that I have to create logical system for client 001. I have taken a list of available clients from the abap R3 side. Here is a list of it.
Clients View
Cl. Name City Crcy
000 SAP AG Konzern Walldorf EUR
001 Auslieferungsmandant R11 Kundstadt USD
066 Test EarlyWatch Profiles Walldorf EUR
I cannot get inside the BW side for it asks me to create a logical system for client 001. What to do?
Kindly help me.
Kannan

hi,
? First log on to SAP R/3 server connections Go to SCC4 in R/3 & in Scc4 BW server. A screen opens in that logical name of the system would be opened in both (R/3 & BW).
? Take notepad in it save .R/3 & BW logical names go to R/3 & click SM59 to create R/3 connections click then a screen opens gives BW logical name in RFC Destination option & give connection. type 3 & give some description & then press enter.
? You will get another screen under it then at target host gives BW server name we will get it from BW logon change ID, IP address option & give the system no. The system no go to logon pad just drag it then you will see the name.
? Then click on log on securities go to log on give BW server details like No, client user Password. Then save it then click test connection tab if there are errors then it gives yellow color if they are no error the whole thing come as white.
? Then click on the Remote Logon then we go to BW server give RFC SM59 & click create. Then give the server name which is at the bottom right corner give it then give the no, name, password in logon Security save it & test connection & then remote logon.
? R/3 - B W - R/3
? Logical connection source system connection is used to transfer the data from R/3 to BW. Go to BW system& click RSA1 go to source system option go to top to the source systems right click on it. Then click create then a screens opens then.
? PC ?Flat file , DB ? Database
? Select the option manual then a screen appears RFC Destination, Logical source name then click OK then it goes to opens other screen save it test connection then remote login then it go back to the then a screen opens then click only activate.
? BW ? RS1 ? SOURCE SYSTEM ? CREATE MANUAL AUTOMATIC CELL
? R/3 ? Test connections login ? back ? replicate method ? active data R/3 Source system you will able to.
hope it helps u
Ramesh

Hi All how to add new payscale for an employee in sap hr-abap,its urgent

Hi All ,
how to add new payscale for an employee in sap hr-abap,its urgent.
Message was edited by:
bharat kumar
Message was edited by:
bharat kumar

Hi
If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
If that field is not there in the any of the structures then you can define a variable using define command
/: DEFINE &VAR&
/ &VAR& = <some value>
or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
<b>Reward points for useful Answers</b>
Regards
Anji

ALV GRID and Integrated ITS 7 (SAP GUI for HTML) - dissapears on reload

Hi All,
We have a custom report that uses an ALV grid to display information to the user. Within this grid, there are fields that are display only and fields that are editable. Also, the grid is wider than the screen's width. It works fine in ECC. It also worked fine when we were using ITS 6.4.
We have recently upgraded to ITS 7. Now when we run the report using a Transaction iView (in EP 7) or the Webgui service (SAP GUI for HTML), if a field that is editable has focus when an event is triggered that reloads the grid, the screen becomes blank. So, you can click the Save button and the screen goes blank, also, there are date fields in the grid and if you choose a new date, the grid reloads and the screen becomes blank.
We have found that when the screen is blank, you can use the "Page Up" button on your keyboard and the last few columns of the grid will appear. As if the entire grid has moved off-screen to the left.
If you click onto a non-editable field and refresh or save, the grid returns to its normal state.
We are on Basis Patch level 15.
Does anyone have any ideas on how to fix this?
Also, does anyone know of a standard SAP transaction we can call from the Webgui that would have a similar setup...with an ALV grid containing editable and non-editable fields? We would like to rule out any errors in the report itself. Since it worked before we upgraded and it works fine in ECC. This would be a really big help too.
Thank you so much!
-Kevin

Hi,
Thanks Raymond, I have seen Note 314568. I could not get the second link to work but I have looked at just about every Note in reference to Integrated ITS 7 and Tables or ALV Grids and there are very many, so it would appear that SAP has had a hard time with implementing this control, but I have not seen any instance that matches the problem we are having.
Unfortunately, SAP will not investigate this unless we can provide a standard Transaction that exhibits the same behavior.
If anyone knows of a standard SAP Transaction that displays an ALV Grid that is wider than the screen (requiring a horizontal scroll bar) and with editable and non-editable fields, that would be fantastic. If we can test against that, then we would know for sure if this is a problem with ITS / SAP GUI for HTML, or if there is an issue with this specific report.
Thanks!
-Kevin

Total No of pages different in report printed using Crystal Report XI R2 vs SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8)

Currently in our application, we are using Crystal Report XI R2 for generating the reports. We are in the process of upgrading the Crystal Report to SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8). I updated that on my machine and all the reports work fine. I didn't have to modify any of the reports.
However when comparing the reports, we found that there are few reports on which the total no. of pages differ from the report displayed using Crystal Report XI R2 vs SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8). Comparing the reports, it looks all the data that were fit on one page earlier with version XI R2 doesn't fit on the same page with version 13.8, thereby increasing the page counts.
The fonts, page margins everything set on report itself. Nothing being set in the code.
Both the application is using the same report that is pulling the data from the same database. Our application is a web application.
Any suggestion, why this is happening.
Thanks.
Sanjay

I am not sure what is being compared here?
CRXI R2 designer to CRVS?
CR XI R2 in some version of .NET to CRVS?
CR XI R2 using RDC SDK to CRVS?
Also, is this happening on your development computer or after you deploy?
If you compare the the "Page setup" options dialog between reports that work and those that do not work, do you see any difference?
Is this a web or a win app?
Are you seeing the same issue when viewing and exporting - say export to PDF?
What is the printer driver used and it's version?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

What is the Current ABAP Kernel version for SAP ERP 6 (ECC6)..?

What is the Current ABAP Kernel version for SAP ERP 6 (ECC6)..?

Hi,
Login to http://service.sap.com/swdc using your S user-id
Serach for kernel
Check for your relevent kernel patch (unicode/non-unicode , NW release etc.)
Regards,
Rajneesh

SAP DEMO Database for SAP b1 Version for HANA

I was wondering if anyone can Help. I have installed the SBODEMO database on SAP B1 version for SAP Hana. V9.0 PL4 and then upgraded to PL9HF (901.00 to 902.001) the SBOCOMMON upgraded ok but SBODEMO database failed on the pre upgrade checks with "Parameter type error in stored procedure SBO_SP_TranasctionNotification and refers to Note 134078. I logged it with SAP and they have said uninstall the SBO DEMO database and then reinstall. Can anybody provide details on how to do this as there are no uninstaller just for the DEMO db as it was installed during the SAP B1 server installation.

Hi Nathan,
You can uninstall using uninstall.bin typically located in /opt/sap/SAPBusinessOne. If you deleted /opt/sap/SAPBusinessOne or the uninstall fails you can use the command shown below.
//Check for B1 rpm files
rpm -q -a | grep B1
//remove B1 rpm files
rpm -q -a | grep B1 | xargs rpm -e
After uninstalling I would recommend deleting the directory (rm -rf /opt/sap/SAPBusinessOne).
Best regards,
Duncan

SAP VERSION FOR ITS

Similar Messages

Maybe you are looking for