SAP VIM Integrated Invoice Cockpit - single default layout variant for all exceptions

Dear all,
I hope some one has found the solution for this problem we are experiencing in SAP Vendor Invoice Management 600:
For the Integrated Invoice Cockpit ( transaction /OPT/VIM_IIC ) we want to be able to define ONE global layout variant ( available for all users) that is available for all exceptions in the ICC. This so we only have to define and maintain one layout variant centrally.
However this seems not possible: we tried to do so with the transaction /OPT/VIM_EIIC_ADM but it appears that it is only possible to define global layout variants for each exception in the ICC separately ( which is a lot of maintenance work)
Is there a solution available for this ?
Many thanks in advance for your help.
Kind Regards,
Arjan

Similar Messages

IH01 default screen variant for all users

Hi,
I want location hierarchy, equipment installed and BOM explosion checked in the transaction IH01 for all users. I can do this through a screen variant but the user will have to choose it every time he enters this transaction. Is there a way that the above fields default as checked everything a user enters the t-code? I looked for it in SPRO and could not find it. Any help would be greatly appreciated. Thanks
Ajay

hi
if the variant you have created is the only one available then it will display to all the user,but the if some other variant is there with user name then it will be displayed for the user logged on .
only thing is don't authorize the user to create the variant
from SAP help:
Each user can also create their own selection screen. The selection screen defined by you is only then proposed by the system, if no individual selection screen has been defined for the user under their user name.
If you want to define an individual selection screen for each user, and the user-specific selection screen should be proposed automatically when the report is called up, the name of the report variant must begin with U_USERNAME.
Maintenance of selection variants
When you execute the function, you reach the initial screen with all the selection fields. There you can define the standard selection screen. This selection screen is then always proposed if no individual selection screen has been defined for the user under the name U_USERNAME.
regards
thyagarajan

Unable to set default layout variant in POWL

Hi Experts
We have performed below activity in POWL_QUERY to assign default layout variant.
1. Choose Layout variant.
2. A browser window for the POWL_MASTER_QUERY appears.
3. Change the sap-config-mode from "X" to "config" within the URL.
4. Now you can define your layout variant and save your changes.
5. Log on to the Customizing client and start transaction POWL_QUERY.
6. Assign your created layout variant in the Layout selection field.
But Still I am not able to see selected layout.
I am using NWBC 4.0 and NW - 7.02.
Please advice.
Regards,
Yogesh

Hi!
          We have same problem!
         The layout can be selected in application, but it is not taken as default.
     We appreciate your feedback
Best Regards.
Angelica

Default Layout Variant using LIST Display FM

Hello All,
I'm using the FM REUSE_ALV_LIST_DISPLAYin my Report.
I want to save the layout Variant as a Default Layout Variant .
But when I'm clicking the option for saving a Layout I'm getting only one check box for User Specific Layout.
How can I set a layout created variant as a DEFAULT Layout Variant ?
Regards,
Deepu.K

Hi,
Once List is displayed, use the path: Setting->Layout>Layout Management->Click the check box against the layout which you want to set as the default. Then click on Define Default settings, first icon. You can follow the above instructions after running one of the DEMO pgms viz. BALVSD01.
I hope this helps,
Regards
Raju Chitale

Default Layout Variant

Hi Friends,
What is a default layout variant? How to create one?
Thanks in advance.
Tamilarasan

hi, something additional to Raja input.
you can load a layout for ALV in programing way.
the ALV variant be stored in table V_LTDX, you can select out the variant record from it. So you can call the ALV with some difference, code like following:
DATA: L_LAYOUT TYPE DISVARIANT.
L_LAYOUT-REPORT = SY-REPID.
L_LAYOUT-USERNAME = XXXX. "user name
L_LAYOUT-VARIANT = XXXX. "the variant name you saved
CALL METHOD GO_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING I_STRUCTURE_NAME = 'SFLIGHT'
IS_VARIANT = L_LAYOUT
Then the ALV will be display as the layout you want, without special choose.
Hope it will be helpful.
thanks a lot

Default Start Variant for VF04

Any Info on Default Start Variant for VF04.
Regards,
M

Dear Manisha,
Default Start Variant for VF04
There are two types of variant in VF04.
One is the selection variant before clicking the Display Billing List Button.
You can set the start variant via SE93 using the Change mode.
The second variant is the Billing Layout display variant.
This is after clicking the Display Billing List Button.
After creating your layout display variant, you can set it by clicking :-
Settings ->
          Display Variant
                            -> Administration
Select the layout display variant you want and click :-
Edit ->
        Define default settings
Regards,
Rakesh

How can I set the default home page for all new users in Firefox 4

I'm trying to deploy FF 4.0rc1 in a corporate environment but I can't find a way to set the default home page or any other settings for that matter.
Is there a way to set the default home page for all new users and lock it so that the users can't change home page?
Best regards
Jonas

In Firefox 4 the template folder for new profiles (C:\Program Files\Mozilla Firefox\defaults\profile\
) doesn't exist. You can create that \defaults\profile\ folder and place a file user.js in it with the prefs that you want to initialize.
See:
*http://www-archive.mozilla.org/catalog/end-user/customizing/briefprefs.html
You can also use a mozilla.cfg file to set the default value for prefs.<br />
See: http://kb.mozillazine.org/Locking_preferences
defaultPref(); // set new default value
pref(); // set pref, but allow changes
lockPref(); // lock pref, disallow changes

How to configure default parental settings for all users (10.7)?

Hello,
I've made a silent installation of iTunes using MSI files and it works well.
I need to enable parental controls and configure it. Users must be preventing of changing these settings.
At the end of the iTunes installation I automatically created registry keys :
[HKEY_LOCAL_MACHINE\SOFTWARE\Apple Computer, Inc.\iTunes\Parental Controls]
"AdminFlags"=dword:001b7ac5
"AdminMoviesLimit"=dword:000000c8
"AdminTVShowsLimit"=dword:000001f4
"AdminRatingSystemID"=dword:0000000b
"AdminGamesLimit"=dword:0000012c
According to http://support.apple.com/kb/HT2102 it is the procedure to set default parental settings for all users and to lock these settings.
When iTunes is first launched, parental settings are not set nor locked.
I use iTunes 64 bits on Windows 7 64 bits.
Where is the mistake?
Thanks in advance.

You can set up a system cache for sharing jars: See here: http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/enterprise_config.03.06.html

I can set my default home page (when Firefox starts) but if I open subsequent tabs I get a blank page. How do I set my default home page for all tabs.

I set my default home page to AltaVista.com. This page comes up as expected when I start Firefox. However if I open a new tab I get a blank page. How to I setup Firefox to use my default web page for all subsequent tabs. This was an easy process in IE

Sounds like you want the New Tab Homage extension.
https://addons.mozilla.org/en-US/firefox/addon/777/
For more info about extensions, see [[Using extensions with Firefox]]

How do I set the default print margins for ALL printers in mozilla.cfg

How do I set the default print margins for ALL printers in mozilla.cfg, even ones that are not yet installed / connected to the computer?
I'm trying to install firefox with MDT and apply certain print options, but the printers themselves are connected at a later stage so the print.printer_myprinterhere cannot be used.

Best answer I could find: [https://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/#comment-132668]
If you can figure out how to add the printer name, this can be used to lock the margins.

Define a line layout variant for item display

I am getting the following message "Define a line layout variant for item display" while displaying the document via FPL9.
Thanks for the help.
Kumar

Check customizing:
Financial Accounting > Contract Accounts Receivable and Payable > Basic Functions > Account Balance Display > Define Proposal for Line Layout:
You should have an entry like:
SAPLFKL9 Account Balance STD Standard callup of account display VVV 0001
Where VVV - Is you account balance variant that should have been defined in:
Financial Accounting > Contract Accounts Receivable and Payable > Basic Functions > Account Balance Display > Define Line Layout Variants for Account Balance
Cheers,

How to create a single 'not null ' validation for all the items in a page ?

Hi everyone ,
how to create a single 'not null ' validation for all the items in a page ? I have many textfields . Instead of creating 'not null' validation for each item , I would like to create a a single validation control that will serve the purpose
Thanks & Regards
Umer

Nice1 wrote:
bob , as u said I have done the following :
1) under create button , there are 9 items and for each item I have set Required to 'Yes'
2) under delete button , there is 1 item and have set Required to 'Yes' for the item
3) defined page validation for 9 items under 'create ' button and have set it to fire when 'create ' button clicked
4) defined page validation for 1 item under 'delete ' button and have set it to fire when 'delete ' button clicked
now , when I click 'create' button it even shows for the item under 'Delete ' button that it is a required itemSorry, I didn't see this note. The required template won't work, there is no way to attach it to the button.
The best solution is as the reply a couple replies up
Create 2 page type validations as a PL/SQL with code
1st validation
:P1_ITEM1 IS NOT NULL and :P1_ITEM2 IS NOT NULL ...... and :P1_ITEM9 IS NOT NULL include all 9 items
Set the When Button Pressed to the CREATE button
2nd validation
:P1_ITEM10 IS NOT NULL
Set the When Button Pressed to the DELETE buttonI think that's going to be the easiest way to do it.
Edited by: Bob37 on Apr 27, 2012 12:02 PM

Changing the default keyboard language for all users via command line

I have about 250 computers, that I set the wrong default language on.
I am hoping someone here can help me. I have 3 keyboard languages installed in my labs,
En-English (United States)
Fr-French (Canada)
En-English (Canada)
I'd like to make the Fr-French (Canada) the default keyboard language for all users that login I have tried the following xml but it's not working. I do not see the problem any help would be appreciated.
I tried to run it by doing this
control intl.cpl,, /f:"FR-DefaultKeyboard.xml"
The following code below is called FR-DefaultKeyboard.xml file.
<gs:GlobalizationServices xmlns:gs="urn:longhornGlobalizationUnattend">

<gs:UserList>
<gs:User UserID="Current"/>
</gs:UserList>

<gs:UserLocale>
<gs:Locale Name="FR-CA" SetAsCurrent="true"/>
</gs:UserLocale>
</gs:GlobalizationServices>

<gs:GlobalizationServices xmlns:gs="urn:longhornGlobalizationUnattend">
<gs:UserList>
<gs:User UserID="Current" CopySettingsToDefaultUserAcct="true" CopySettingsToSystemAcct="true"/>
</gs:UserList>
<gs:InputPreferences>

<gs:InputLanguageID Action="add" ID="0409:00000409" Default="false"/>

<gs:InputLanguageID Action="add" ID="0c0c:00000c0c" Default="true"/>

<gs:InputLanguageID Action="add" ID="1009:00001009" Default="false"/>
</gs:InputPreferences>
</gs:GlobalizationServices>
This worked, thank you

SAP QM Default Inspection Plan for all Inspection Lots created in the Plant

Scenario: We have a Proto type plant in which Daily 15 to 20 materials are created every day. We have only one inspection plan for all the materials.
Problem: We don't want to do material assignment in the Inspection Plant header every time a new material is created
Requirement: Is there any way to default the inspection plan for all the inspection lots created in the Plant by Standard Configuration or User Exit.
Your answers will be much appreciated and rewarded.
Thanks in advance,
Thiyagu

Hi,
In our case Creation of Inspection lots are controlled by QM View of Material Master. Our problem is to find alternative for assignment of New Materials in the Plan header in Tcode QP02, as we have only ONE INSPECTION PLAN. So our expection is all QM Inspection Lot created in the Plant should always get assigned to the SINGLE INSPECTION PLAN, with out doing any assignment of material in the Plan.
Thanks,
Thiyagu.

Problem with same layout (variant) for two ALV Grid and ALV Tree

Hello!
I have two docking containers on the screen. On the left i have cl_gui_alv_tree, on the right cl_salv_table.
When a user set a default layout for ALV Grid (or ALV Tree), raport starts and sets this layout in both objects (tree and grid).
How to avoid this?

Hi,
Take Two radio buttons.
First radion button display the two containers in grid format,
second radio button display the two containers in tree format base on user selection.
CREATE OBJECT G_DOCING_CONTAINER
    EXPORTING PARENT = G_CUSTOM_CONTAINER."G_CONTAINER.
DISPLAY THE DATA IN GRID FORMATA
CREATE OBJECT r_grid
    EXPORTING
      i_parent          = G_DOCING_CONTAINER
CALL METHOD g_docing_container->set_width
      EXPORTING
        width      = 1300.
DISPLAY THE GRID DATA IN SECOND CONTAINER
CREATE OBJECT r_grid1
    EXPORTING
      i_parent          = G_DOCING_CONTAINER
CALL METHOD g_docing_container->set_width
      EXPORTING
        width      = 1300.
OTHERWISE WE CAN DISPLAY THE TWO CONTAINERS DATA IN A GRID FORMAT
CREATE OBJECT g_tree
    EXPORTING
      parent                = g_docing_container"g_custom_container
IF R1 = 'X'. "FOR GRID DISPLAY
CALL METHOD r_grid1->set_table_for_first_display
CALL METHOD r_grid2->set_table_for_first_display
ELSE.
************TREE DISPLAY
ENDIF.
regards,
muralii

SAP VIM Integrated Invoice Cockpit - single default layout variant for all exceptions

Similar Messages

Maybe you are looking for