SAP Web Access Issues

Hello Experts,
I have been given a link for SAP Web Access. I am able to access transactions and post data and write programs. However, none of the GUI functionality is working and is giving shorts dumps when i click on the layout tab for Adobe, Internal error for form painter in smartforms and a file not found error for layout editor for screen painter. I raised this issue with the Ides team but they do not have a resolution for it and they too get the same error on all of there systems.
Has anybody enocountered this issue before and if so could you please give me some direction.
One point is that for an existing Adobe form i'm able to successfully execute it and display the form.
Thanks for your help!
Minhaj.

Dear Juan,
I can access another server with http://FQDN:50000, It will show the screen of SAP Web Application Portal.
After I check parameter icm/host_name_full , I did not maintain anything, it is working fine.
Why in ERP system, I did not maintain anything like that server, I have only maintain FQDN, It is not working and did not show anything.  Pls suggest me how to solve it.
Regards,
Pannee

Similar Messages

  • Application Itegrator - Outlook Web Access issue!

    Dear all,
    Currently, on a requirement to integrate Outlook Web Access into portal, I am required to create a system based on par file "webapps.par".
    I've looked into SDN and Service Marketplace but unsuccesful to find the par file.
    If any of them have been able to download it or are aware of the location to download, request you to provide it.
    My mail id is "[email protected]".Appreciate any kind of help.
    Thanks & Regards,
    Sharath MG

    Sharath,
    Please refer to this blog.
    Configuring Outlook Web Access iViews
    Hope this helps.
    Cheers,
    Sandeep Tudumu

  • Oracle Primavera Cost manager v 6.2 web access issue

    Hi,
    We are trying to integrate the cost manager for web access. However, after setting up the IIS for the latest version, an error message is generated saying the web access installation was interrupted abruptly.
    Assistance is highly appreciated.
    thank you,

    One other thing to check is that iptables on your Oracle VM Manager box/vm is not blocking the Oracle VM Manager UI, to test type /sbin/iptables status, if iptables running turn it off by typing /sbin/iptables stop.

  • Meeting Place Express 2.1.1.2 Web Access Issue

    Hello all,
         I'am having an issue with a Meeting Place Express 2.1.1.2 server.  There was a power failure and now we can still access the server via dial-in but the web acess is not working.  From the CLI i run the mpx_sys status command and it says webservices is active.  The server has been restarted.  When I check the errorlog I see "unable to connect to webservices, trying again"  Anyone know what the issue might be? Thanks
    Jason

    Hello Hasnain,
    Have you tried the recovery procedures below:
    http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Express%2C_Release_2.x_--_Troubleshooting_System_Issues#Recovering_the_Password_for_the_root_Account
    If that doesnt work, you will need to open a TAC case and TAC will send you a password recovery .iso file to burn on a CD/DVD.
    Regards,
    Victor Dang.

  • Cannot scan to e mail - Printer does not wake up - Web access issues

    I own the HP 7520 AIO since a couple of months.
    Everything was working fine untill 2 weeks ago
    After a couple of hours , you cannot print anymore, you have to reset the network connection. Sometimes it works just by reseting the wireless , sometimes you have to go for a printer shutdown , plug out the cord (because you cannot power on again the printer by pressing the power button)  and replug. I tried to configure again Wireless connection but I does not solve the issue .
    In addition,when I'm trying to access to apps or to scan to e mail from the front panel, I'm getting an error message saying that  it is impossible to connect to Web services.
    I tried to reset the printer to factory but now it's worst I cannot configure e print anymore at all...
    Scan to computer (to Windows) is working all the time (to Mac has never worked from the printer but work from the computer) 
    I did not change something to the home wireless (router or others) since I first configured the printer.
    Could you please help me to solve these issues ?

    Hi engte,
    Welcome to the HP Support forums.  I understand that you are unable to scan to email with your Photosmart 7520 printer and also you are unable to connect to web services.
    To reconnect to web services please set a manual IP address and DNS servers.  I have included a link to another post I did with the steps (including screen shots).   It also sounds like the router may have had a firmware update so I’ve also included the Printer Does Not Maintain Wireless Connection document.  There are several valid trouble shooting steps to follow if the manual IP doesn’t correct things.
    Please let me know how it goes.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • CiscoWorks LMS 3.1: HUM and Web access issue...

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman";
    mso-ansi-language:#0400;
    mso-fareast-language:#0400;
    mso-bidi-language:#0400;}
    Hi there,
    I would like to seek your counsel with regards to the recent incident that we encountered with our CiscoWorks LMS 3.1 running on Solaris 10.
    A few days ago, we received a few complains from our users that they were unable to view the pollers or contents of the TOP-N <CPU | Memory | Interface> Utilization on the HUM’s home page (see attached file, hum_homepage.jpg).
    We (tech support guys) checked the pollers’ status and they’re all Active (see attached file, pollers.jpg); we notified our Administrators and requested for a copy of the HUMPortal.log (see attached file, humportal.zip).
    The following day, while waiting for the HUMPortal.log, we received reports that users accessing the HUM home page are stuck with the message “loading…” on all TOP-N Utilization reports.
    As we were about to re-queue our request from our administrators, we received reports (a few hours ago) that our CiscoWorks LMS is inaccessible via web browser.
    We alerted our administrators and they attempted to restart the Daemon Manager (/etc/init.d/dmgmtd); they were able to successfully shut it down but took several attempts to start it up.
    As they attempt to start up the Daemon Manager, they encountered the following error message:
    # /etc/init.d/dmgtd start
    Error: Daemon Management could not start. Trying again
    Error: Unable to bind to port, please check port (42340) state and permissions.
    Error: If the port is in use, please try starting Daemon Manager once it become free.
    After several minutes passed, they were able to start up the Daemon Manager successfully although the CiscoWorks LMS is still inaccessible via web browser.
    We requested for a copy of the “pdshow –brief” log and every daemon (as far as I know) seemed to be working fine but it never hurts to ask for help to verify my findings (see attached file, pdshow0818a.log).
    As of the moment of  this writing, we are still unable to access CiscoWorks LMS via web  browser; any insight or suggestion on the next step to take in  troubleshooting and eventually solving this problem is very much  appreciated.

    The port 42340 issue is most likley not related to the HUM issue you described. The latest log entry you provided indicates "Possible reasons for 'No Data' in HUM Portlets could be either Poller is not configured, or Poller is deactivated, or Poller Failure has occurred, or Summarization job did not start." The error is repeated back to the beginning of the file dated Aug 14 16:39.
    To focus on the HUM issue:
    Did any change occur on or around the 14th that you are aware of?
    Please provide some additional debugs:
    1. Please enable debug for "UPMProcess"
    Log files are stored here: #/var/adm/CSCOpx/log/#
    - HUMPortal.log
    - upm_summarization.log
    - jrm.log
    - upm_process.log
    2. To set log levels:
    *Health and Utilization Monitor > Admin > System Preferences*.
    - Select Log Level Settings.
    - Select the application module from the drop-down list.
    - Select the Debug log level from the Logging Level drop-down list.
    Thanks,
    Nick

  • SAP Web access

    Hi,
    I want to access the SAP in Web browser, I am able to do it.
    my Url is http://sap-server:8000/sap/bc/gui/sap/its/webgui
    Now I need to display SAP Equipment Window Directly
    ( T.code :IE03 & Equipment No: xyz)
    I need to open the above screen directly by url.
    How should i built such type of URLs
    I should get my url as
    http://sap-server:8000/sap/bc/gui/sap/its/webgui/tcode=IE03/eno=xyz/
    Help me in this.
    Points will be awarded.
    regards,
    Jayasimha

    Hi Jayasimha,
    this frequently asked question is discussed in the wiki article
    'How to prefill fields and skip first screen with webgui?'
    I am sure you will find the answer there.
    regards
    Tobias

  • 5800 - WLAN web access issues

    Hi all,
    I have my 5800 connected to my Zyxel Wireless router to access the internet. I can browse and search to a certain point but some links don't go anywhere.
    For example, I can browse to the bbc.co.uk site and select sport to bring up the sport homepage, but then clicking on football does nothing.  Using 3G accesses the football page fine.
    Is there something on my phone or router I need to update?  The firewall hasn't got any rules which I have applied.
    Richie.

    Do you run into this issue with the same page every time?  I'm wondering if your wireless session is being disturbed by a phone or other device that's running at 2.4G, which I ran into once.
    Lumia 920, Lumia 800
    Nokia N8-00 (NAM, Product Code: 059C8T6), Symbian Belle, Type RM-596, 111.030.0609
    Nokia 5800 XpressMusic (NAM, Product Code: 0577454) Software v51.2.007, Type RM-428

  • How to allow access from LAN to server on LAN using external FQDN? (Outlook web access issue)

    I may have phrased the topic not too clearly, but I have an external domain name of mail.company.com , I want my users INSIDE the company be able to also get to https://mail.company.com , currently they cannot (nothing loads, looks to me as if firewall simply drops it) and I'm drawing a blank on how to get this done. Externally this works fine so if you're outside the company you can load up OWA just fine since my NAT rule translates the external IP to internal IP, but something is blocking this from the inside.
    I have an ASA 5510.
    If you can just sent me on the right path with theory I'll figure it out on my own, I don't need exact steps, but I must be thinking of this wrong as I'm not getting anywhere.

    Hello Martin,
    Maybe what is happening is that the DNS entry is pointing to the public IP address of the server, so it could be that the internal users are forwarding the traffic to the public IP address of the server and the ASA will drop the packet since the hosts are going to try to contact the server from the inside when actually there is a NAT rule that translate the internal server on the outside with a public IP. The traffic will try to contact that server going to the outside interface, but the ASA will notice that the connection was initiated on the inside interface, so it will refuse the connection.
    There is a solution for this issue. You can create a static NAT rule that matches le that translate the internal host to the public IP address, in this case, instead of -inside,outside-, the rule is going to be -inside,inside-.
    For example:
    Let`s say that there is a static NAT that match the following statement for the inbound traffic coming on the outside:
    static (inside,outside) {public IP} {private IP}
    There should be one that says the same but with inside,inside:
    static (inside,inside) {public IP} {private IP}
    Please configure that rule and let me know the results.
    Thanks.
    --Armando Rojas

  • Multiple SAP User Access Issue?

    Dear Expert,
    SQL Express 2005
    Wndows Server 2003
    Client PC RAM 1GB
    Server RAM 16GB
    SAP Version 8.8 PL15
    14 Store Procedure
    When multiple user connected with SAP (Logedin) at that time any user add any SAP document then all remaining user hanged approx 2 min after successfully add all user working normally.
    Please Suggest me as early as possible
    Thanks,
    Srujal Patel

    Hi Srujal.......
    This is purely due to heavy customization may be thorugh Addon or through Stored Procedure.
    Try nullifying effect of these 14 Stored Procedures and DC Addons if any and then ask users to add the documents. I am sure they wil work normally. This may happen because of FMS also.......
    Regards,
    Rahul

  • Cannot view OWA email - after upgrade to Firefox 5.0, Outlook Web Access displays ASCII characters (garbage) in message body. Same issue with multiple servers.

    Email body of HTML or RTF messages are rendered in ASCII characters after upgrading to Firefox 5 when viewing email in MS Outlook Web Access (OWA) light from MS Exchange 2007 servers. Issue is repeatable with two entirely different Exchange systems.
    Text email renders OK. Work around is to forward email (in use MS-IE).

    You are welcome. I'm glad you got it back up.
    (1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
    (2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
    (3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
    (4) Add some SARE rules:
    Visit http://www.rulesemporium.com/rules.htm and download the following rules:
    70sareadult.cf
    70saregenlsubj0.cf
    70sareheader0.cf
    70sarehtml0.cf
    70sareobfu0.cf
    70sareoem.cf
    70sarespoof.cf
    70sarestocks.cf
    70sareunsub.cf
    72sare_redirectpost
    Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
    backhair.cf
    bogus-virus-warnings.cf
    chickenpox.cf
    weeds.cf
    Copy these rules to /etc/mail/spamassassin/
    Then stop and restart mail services.
    There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

  • Remote Web Access (remote desktop gateway) issue with WHS2011

    I have been using Remote Web Access on my Windows Home Server 2011 for several years with no problems. Over the past several weeks, though, I have been receiving an error when I try to connect to a computer through WHS's Remote Web Access:
    "...the Remote Desktop Gateway is temporarily unavailable." Interestingly, when I try to connect from a Windows 8.1 computer, I just get a dialog box that says "Initiating connection," but the connection is never established. I cannot
    find any relevant errors in any of the event logs.
    I have read numerous articles relating to WHS configuration and port forwarding, but these do not have any information that addresses my situation. I have ports 4125, 80, and 443 forwarded to my Home Server. As I said, everything has been working fine with
    this configuration until several weeks ago -- I suspect it might have something to do with a .NET Framework 4.5 update that was recently installed (and that has now been uninstalled), but that is the only change I can think of.
    Any help would be greatly appreciated! Thanks!

    Hi,
    As you have commented that after installing .Net framework you are facing this issue. So after uninstalling still you are facing the same issue. Apart from installing .Net framework 4.5, have you installed or done any other change on your server?
    Here you can check that “Remote Gateway Service” is running. Please check and restart the service if it’s stop. Apart you can check below 2 article for more detail step.
    1.  Can’t connect to the remote computer because the Remote Desktop Gateway server is temporarily unavailable error via SBS 2011 
    2.  This computer can't connect to the remote computer because the Terminal Services Gateway server is temporarily unavailable (Try to perform the steps as suggested for
    WHS 2011)
    Hope it helps!
    Thanks,
    Dharmesh

  • Issue with Excel Web Access --Excel graph showing only gray color

    I am using "Excel Web Access" Web Parts to show the excel graphs in my MOSS2007 setup. I have multiple team sites under one site-collection. Excel web access is fine for all the team sites but , its showing only gray color for just one site. I tried to upload
    new excel sheet with different graphs but still it shows the same gray color.
    Any help would be really appreciated. 
    Umesh Mishra | My blogs: http://windowsadminblog.blogspot.com | Twitter @UmeshMishra | Linkedin: /in/umeshmishra

    I was able to resolve the issue , here is the solution: http://windowsadminblog.blogspot.in/2012/12/excel-web-access-graphs-showing-gray.html
    Umesh Mishra | My blogs: http://windowsadminblog.blogspot.com | Twitter @UmeshMishra | Linkedin: /in/umeshmishra

  • Outlook Web Access integration issue

    hi all,
    i just tried to integrate the OWA into portal.
    i've read this doc:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/integration%20of%20outlook%20web%20access%20into%20sap%20enterprise%20portal.pdf
    i've read this thread:
    Outlook Web Access integration
    but it still make no sence about how to config the ExchangeAlias or where can i find mailNickname or what is ADS metioned in that thread.
    i found dataSourceConfigation.xml in  J2EE_Engin, er... ,btw how to download ..
    any suggestion?
    thx in advanced.
    Edited by: fishy yu on Mar 15, 2008 3:44 AM

    i reached NOTE732911  and saw:
    "1. You are using Windows NT authentication for the Exchange server"
    but our exchange is setup on W Server 2003,   is that mean the NOTE 732911 cannot reach my requirement.
    i've alse finished all the steps the NOTE mentioned,  but what i see is still a login page ...
    any suggestion?
    thx in advanced.
    Edited by: fishy yu on Mar 17, 2008 11:29 AM

  • Accessing SAP Web Transaction - error with DragAndRelateLayer

    The Assets Business Package provides an iView which allows objects to be viewed within the iView. It also has icons to go into SAP an view and amend data SAP Web - in this case Assets which are viewed and amended by Transactions IL02 & IL03.
    On clicking the icons the SAP Web transaction IL03 should show, but instead it displays:
    com.sap.portal.appintegrator.sap.Transaction::Transaction/DragAndRelateLayer
    There are no drag and relate targets set up so there should be no reason for this to occur.
    Has anyone come across this issue and found a solution to this problem?

    Any help about it?
    thanks...

Maybe you are looking for