SAP web AS not picking up my custom actions defined jar

Hi,
I added some custom actions in the config.xml of the SAP Internet Sales Application, but noticed that this server is not picking up the jar file in which I defined my custom actions. This happens even though I placed the jar file directly under the WEB-INF/lib folder.
When I go through the logs, I see that under the resources, it picked up all the jars except mine. Is there a place where you define what jars to pick up with in the WEB-INF/lib folder.
Thanks
SK

Oh yes, there is.
In NetWeaver never place any files into directories and expect them to work. You MUST deloy them regularly.
On every start the server checks the files against what is in the DB and I don't know what it does in case of no file in DB, but it may even delete it...
Regards,
Benny

Similar Messages

Webi does not pick correct Data

Hi Guys,
I have a webi. The Universe for the Webi is based on Bex Query. I see correct Data in Bex Query but when I create a webi report it does not pick correct data.
I have checked following points already:-
1] No Resstriction at Query Level
2] No restriction at Universe Level
3] No Filters/ Restriction at Webi Level.
Can anyone suggest whats happening?
Regards

Hi Ray,
It happens sometimes that data gets aggregated over all the dimension objects present in the 'Available Objects' section in webi.
Try to pull only the characteristics present in the row section of the bex query say 'X' and measure in the column section of bex query say 'Y' into the results pane in the edit query window in webi.Then run the report and check.
This will give you the idea about aggregation.
Regards
Vineeta

SAP MDM Adapter not picking up files in Ready folder on MDM

Hello Experts,
We are sending master data from MDM 7.1 system via PI 7.1 system to SAP ECC system. The Sydnication from MDM system is automatic and the files are being syndicated successfully from MDM system and getting dumped in the Ready folder of the port.
But the Sender MDM PI adapter is not picking up the files from the folder.
The communication channel status in Communication channel monitoring is green and 'data control' is Automatically.
However the file is getting picked up if we stop and then start the channel but not automatically.
Please Help!
Thanks,
Suraj

Check if there are locks for the file channel in NWA. If yes, unlock that and your issue should be resolved.
Login to NWA --> Operation Management --> Systems --> Start & Stop --> JAVA EE Services --> check for File Connector, Locking Adapter and XPI Adapter: File.

SAP Web dispatcher not forwarding incoming HTTP portal sessions.

Hello,
We are using an EP6 Portal from which Abap Web dynpros are launched. The incoming http sessions were accessing our backend ECC6 SAP system through the sap server message . The http sessions were badly dispatched between the two abap servers. We have been advised by SAP to use the sap web dispatcher instead.
The sap web dispatcher has been correctly installed and configured (on the central abap instance ).
I have carefully read the SAP help section concerning the server selection using the sap web dispatcher :
http://help.sap.com/saphelp_nw04s/helpdata/en/5f/7a343cd46acc68e10000000a114084/frameset.htm
All our settings seem to be OK :
The incoming HTTP requests are forwarded to abap servers only.
*In transaction SICF, all the services under the tree
sap/public/icf_info have been assigned to the same logon group .
The capacity of the two servers included in the logon
group " is the same :
server40 LB=12
server60 LB=12
In the Web interface, capacity equal "1" for the two servers.
wdisp/load_balancing_strategy= weighted_round_robin
In the SAP web interface, the prefered server is ALWAYS the same :
Status of Server Group "LOADIS"
Loadbalancing Information
Number of Servers in this group 2
Last used Server
Preferred next Server server40_SPA_10
But it seems that the sap web dispatcher is not used at ALL.
The Load distribution is still based on the SMLG workload as it was the case, before, with the sap message server. The information displayed in the web interface (preferred server) is wrong.
The Preferred next Server is ALWAYS server40_SPA_10 (shown in the web interface), but, in fact, the http sessions are distributed between the two servers server60_SPA_00 and server40_SPA_10 depending on the server quality diplayed in transaction smlg. It was exactly the same behaviour we had before, only with the sap server message .
Any useful help would be highly appreciated.
Best Regards.

Hi,
firstly, have you checked note 1094342? What variant do you want to use? Do you terminate a SSL connection on web dispatcher and create a new one between web dispatcher and application server? It looks like the web dispatcher can't verify SSL certificate used by application server. Maybe you've already tried this but you can try to turn off SSL between dispatcher and application server. If this setup works then problem is in SSL connection. You can check what host name is used in SSL certificate and what host name is used by dispatcher. You can use parameter wdisp/ssl_certhost which sets host name which will be used for certificate validation.
Cheers

LR.3.3 Web module not picking up image edits

When I create a slideshow in LR3.3, it does not pick up the edits that I made to the images. The only things it picks up are crop and maybe sharpening (hard to tell). Haven't had the problem before today. Any help will be appreciated.
Thanks,
John

Pierluigi Vernetto, thanks for that link. Though it was for a web module consumption of the persistence package, I was able to adapt it for use by my ejb module.
Here is my solution, under split-directory development workflow.
Create the persistence module, place the persistence.xml in that module's META-INF.
Create an Ant task in the build.xml to 'wlcompile' and JAR it to the EAR direcotries APP-INF/lib directory.
Exclude the persistence module from the rest of the 'wlcompile' and 'appc' tasks.
I was then able to inject it with annotation in my EJB module.
dvohra16, thanks for that pointer. Now that I've been able to solve, the pressure is off (and shifted to other things). But I will surely check your option out. If I can get that working, it will be much easier than tinkering around with the build.xml and would be the normal flow of split-directory development workflow.
As of now, I will say this thread as 'solved', but if I get it working the way you mention (on my sandbox project), I will surely come back and update this thread.
Edited by: Vyoma on May 27, 2011 11:21 AM

Pricing conditions are not picked in print preview of purchase order.

Dear experts
Purchase order was created for imports vendor.
there is difference of amount in purchase order and purchase order print preview.
In purchase order print preview the system is not picking the values of custom value and custom clearing charges.
Import pricing procedure is assigned to vendor.
what else more be checked since the print preview is not picking the conditions , custom value and custom clearing charges.
Any solutions.
Thanks & Regards.
Erfan.

Hi,
Purchase order was created for imports vendor & must have separate documement type for Import Purchase order or new PO output type for import.
Check FORM or PDF/SmartForm Form used for your Import PO out put type for application EF in NACE t.code. Check SmartForm in t.code: SMARTFORMS and see condition types of custom value and custom clearing charges is there or not. Just consultant with ABAP consultant about condition types of custom value and custom clearing charges inclusion in SmartForm.
Regards,
Biju K

F.27 ACCOUNT STATEMENT NOT PICKING OPEN ITEMS

When I run F.27, and fillin all required fields, and click execute but get a message that no data exists. THough there are balances for this particular customer but in F.27, it is not picking up that customer. What am I missing. I have chosen the correct output control. we were able to get the statement by entering the same information earlier but nowI am not able to get it,
Is there anything that needs to be done in customer master??/
Lakshmi

No there are still open items, some have cleared and some have not for the same customer. Please tell me where am I going wrong.
Also need to clarify, if the customer is cleared , it wont pick up any statement.
Thanks

Advantages of sap gui over sap web

hi experts,
currently we are using sap gui. but we experiencing some slowing especially on peak working hours where users are making use of many transactions. I know that this is normal on those cases. My question is, if we are going for sap web. will it be more faster? efficient to use than the sap gui? this will be in terms of exporting reports and transactions. We havent tried the sap web yet. But we assume that, if we have it on web, it will be faster since only the data will be loaded and no more application gui.
Please suggest.
Thank you in advance

Hi,
I don't think it will give best result from performance point of view.
In your case, it's problem with huge load during peak hours, not with GUI you are using. Slowness during peak hours can be reduced by tunning your system from memory and resource point of view. SAP GUI and SAP WEB do not make big difference in terms of performance and response.
There are more disadvantages than advantages. SAP WEB needs more network capacity and graphics do not look good.
Hope it helps.
Thanks,
Siva Kumar

Add aditional SAP web dispatcher on Server

Hi expoerts,
Could you guide me how to add an aditional web dispatcher on AS ABAP + Java?
My AS is a Windows 2003 x64 with SQL Server 2005.
Thanks!

Hope below docs will help you
http://sapbasis-admin.blogspot.com/
/message/7660921#7660921 [original link is broken]
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/99d42fee2b73e7e10000000a42189b/content.htm
Note 538405 - Composite SAP Note: SAP Web Dispatcher
Note 928952 - Web Dispatcher Installation based on NW 7.0(2004s)
regards
nag

Custom Actions in WD4VC not working

Hi,
I created a composite iview, in that created a form, start point and endpoint.
The form has 2 buttons submit (standard action) and publish (custom action).
In endpoint i have 2 boolean variables for ResultState.
Similarly i have another composite iview.
Using this WD4VC applications i created callable objects in GP.
But all the custom actions defined in composite iviews are not working only the stadard submit action is working.
Kindly guide me or if you have any tutorial would be really helpful.

Hi
Have u defined the mapping with this custom event?
Take help from these threads
1.[VC button|Custom actions - can we send email with VC button?;
2.[How to define a Custom Action in VC 6.0 ?;
Best Regards
Satish Kumar

Portal theme not picked for SAP Web Dynpro Iview

Hi,
We have used light framework page for our portal and all the iviews display the content within the iviews in the same set of colors (blue for buttons). However, for a WD java content, I have created an SAP Web Dynpro iView and the contents displayed here appear in the SAP colors without picking those set for the portal.
The same application parameters display the portal colors when we use the Web Dynpro Proxy iview.
Any idea how I can make the SAP Web Dynpro iView appear like the other portal iviews?
Note: The stylesheet property for the iview is already entered (ur), and I have also set the 'Supply Portal stylesheet' property to 'Yes'.
Please provide your inputs.
Thanks,
Vinay

Hi ,
In ABAP Webdynpro for similar problem we used WDFORCEEXTERNAL Sheet property of WDA.
The Web Dynpro framework automatically compares the versions of the portal and Web Dynpro
for ABAP style sheets. If the Web Dynpro for ABAP has a newer version, the WDA style sheet is used. This avoids unattractive rendering and JavaScript errors.You can deactivate this behavior again using the WDFORCEEXTERNALSTYLESHEET application parameter of WDA.See also SAP Notes 1033496 .
If you use the stylesheet of the portal to display the application, the rendering may not appear correctly and Javascript errors can occur(If portal style sheet is lower than WD).
Though Iam not familiar with WD java , the property force portal style sheet in WD java application should be enough to make WD accept portal theme.
Regards
Karthiheyan M

Custom Manage Property does not pick up the value from mapping crawl property

Hi All,
I have created a custom list with the column name that's called "category".
Then I ran full crawl and I saw the "ows_category" crawl property is created.
Then I create the manage property names as "Category" and map with the "ows_category" and run the full crawl again. (Retrivable, Searchable, Refinable options are checked)
After full crawl, I searched Category:keyword but it returned 0 result.
But when I search keyword, that list item is retuned
I tried to debug with the spsearch2013 tool and there is no "Category" manage property in the return XML.
It seems the Manage Property does not pick up value from the crawl property. (Something might be wrong with the index schema)
Do you have any suggestion?
Do I need to reset the index?
Best Regards,
Andy

Hi Andy,
When you search ‘category’ in crawled properties(Central Administration->Search Service Application->Search Schema), you will see ows_Category is mapped to DiscussionCategory, like the screenshot:
So, I suggest you create a new column using another name, then test again, compare the result.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Web-dynpro application -ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)

i have created my web-dynpro application in development. and sent to quality . whenever i will execute my dynpro in quality i got one message
ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)
whenever i saw sicf transaction my web-dynpro is not seen . my dynpro application name is more then 15 character. what i will do . please give me valuable suggestion.....

Hi Ashok,
for your requirement the application is not exist in particular place. It means, the webdynpro application is saved at different package or different location.
Please change the webdynpro component name and save it in particular request in package, then transport it to quality ..(development server )
then go to SICF t.code .. sap->bc->webdynpro->sap->find out your application and activate the service of your webdynpro application.
Now test it ... this solution might helpful to you .
Regards,
Naveen M

Web Dispatcher Not forwading XML document to SAP XI

Hi Everyone,
We have a web dispatcher that is accepting an HTTP Post over SSL and forwarding this connection to our SAP XI system. Our client post to the box and we see the ssl information in the log and then a string of information about connecting to our J2EE Engine where XI resides.
Here is a snippet from the SWD log:
[Thr 6768] IcmPlCheckRetVal: Next status: WAIT_FOR_DATA(5)
[Thr 6768] IcmHandleNetWrite(id=0/6): HandleServData returned: 5
[Thr 6768] Address    Offset IcmWriteToConn:
[Thr 6768] -
[Thr 6768] 030718FC 000000 c1003297 8535ef16 f9aae7c8 34f128ef |..2..5......4.(.|
[Thr 6768] 0307190C 000016 778dba96 22a728b5 96357d83 75e173a8 |w...".(..5}.u.s.|
[Thr 6768] 0307191C 000032 668a1525 5d1fa229 42312e5a e837a4c3 |f..%]..)B1.Z.7..|
[Thr 6768] 0307192C 000048 25cd16a2 7bee0812 965c59d9 c3af4d79 |%...{....\Y...My|
[Thr 6768] 0307193C 000064 2a17300d a7057b2e 9f5c452c e2b795ff |*.0...{..\E,....|
[Thr 6768] 0307194C 000080 33f3a39f 57c3a039 1fb0c0dd 1c25416d |3...W..9.....%Am|
[Thr 6768] 0307195C 000096 fafa2ac6 ddc3c4f3 b4507205 f5332181 |..*......Pr..3!.|
[Thr 6768] 0307196C 000112 12bb6b77 2eba8afa 084e260f db56666f |..kw.....N&..Vfo|
[Thr 6768] 0307197C 000128 6811e524 1c9d315c 0a324594 1050b990 |h..$..1\.2E..P..|
[Thr 6768] 0307198C 000144 4fb501e7 4224449b 206368c5 969d3b7a |O...B$D. ch...;z|
[Thr 6768] 0307199C 000160 b0e220c8 01fa8b78 e7ae629e 7020b726 |.. ....x..b.p .&|
[Thr 6768] 030719AC 000176 bc0b4c60 82565941 9489134b cdf256e8 |..L`.VYA...K..V.|
[Thr 6768] 030719BC 000192 5e80f602 7d080dce 20ea88b4 7e7b690c |^...}... ...~{i.|
[Thr 6768] 030719CC 000208 4106caca 670aa222 4264014c 62dbfd21 |A...g.."Bd.Lb..!|
[Thr 6768] 030719DC 000224 7ef8388a 8f0ff98a 4e36e1d0 d99eb46f |~.8.....N6.....o|
[Thr 6768] 030719EC 000240 a4aa0d74 2f2a796d 8635fe94 7db1886f |...t/*ym.5..}..o|
[Thr 6768] -
[Thr 6768] IcmWriteToConn(id=0/6): prepared to write data to partner (len = 1372)
[Thr 6768] NiIWrite: write 1372, 1 packs, RAW_IO, hdl 10, data complete
[Thr 6768] IcmWriteToConn(id=0/6): wrote data to partner (len = 1372)
[Thr 6768] MPI<d>0#10 DiscardOutbuf l0 0 0 111868 0 0 -> 030718A8 0
[Thr 6768] NiIPeek: peek successful for hdl 11 / socket 131040 (r)
[Thr 6768] IcmReadFromPartner(id=0/6): read with maximum timeout 500
[Thr 6768] IcmReadFromPartner(id=0/6): request new MPI (0/0)
[Thr 6768] MPI<d>0#11 GetOutbuf -1 111868 65536 (0) -> 030718C8 0
[Thr 6768] IcmReadFromPartner(id=0/6): connection broken (len=0,0)
[Thr 6768] ConnPoolCloseNiHdl:
[Thr 6768]    Pool Entry: 0999C0D0:
[Thr 6768]    NI: 11, SSL: 00000000, allocated: 1, inuse: 1, desc: 08242DF0
[Thr 6768] NiICloseHandle: shutdown and close hdl 11 / socket 131040
[Thr 6768] IcmReadFromPartner(id=0/6): connection broken (buf_used=0)
[Thr 6768] PlugInStopConn: close connection
[Thr 6768] PlugInStopConn: shutdown backend connection
[Thr 6768] ConnPoolCloseNiHdl:
[Thr 6768]    Pool Entry: 0999C0D0:
[Thr 6768]    NI: -1, SSL: 00000000, allocated: 1, inuse: 1, desc: 08242DF0
[Thr 6768] IcrDetachFromServer: closing port 50001/1/0
[Thr 6768] IcmConnPoolFreeEntry: free conn pool entry 0999C0D0[0] in pool 08242D90 (nihdl=-1, ssl=00000000)
[Thr 6768] HTR: decrement load factor: 4000 -> 0 (d=4000)
[Thr 6768] ICR: IcrDetachFromServer -> 0
[Thr 6768] MPI<c>1#23 Close( 1 ) del=0 -> 0
[Thr 6768] MPI<c>1#25 Delete( 1 ) -> 0
[Thr 6768] MPI<c>1#24 Close( 1 ) del=1 -> 0
[Thr 6768] MPI<d>0#12 Close( 0 ) del=0 -> 0
[Thr 6768] MpiIFreeAllBuffers(): free 1120360
[Thr 6768] MPI<d>0#14 Delete( 0 ) -> 0
[Thr 6768] MPI<d>0#13 Close( 0 ) del=1 -> 0
[Thr 6768] NiICloseHandle: shutdown and close hdl 10 / socket 131032
[Thr 6768] IcmConnClose: Connection 0/6 closed
[Thr 6768] IcmConnFreeContext: context 0 released
[Thr 6768] IcmServDecrRefCount: IB2.SERV1.mydomain.com:44380 - serv_ref_count: 1
[Thr 6768] IcmWorkerThread: Thread 8: Waiting for event
[Thr 876] Tue Apr 01 12:38:19 2008
[Thr 876] NiIPeekListen: peek successful for hdl 4 / socket 131232 / socket -1
[Thr 876] SetQoS not possible, no QoS Provider available
[Thr 876] NiIInitSocket: set default settings for socket 131032
[Thr 876] NiIAccept: connect from: host 10.22.4.197, port C8.7C/51324, fam 2 (low adr..high adr)
[Thr 876] NiCreateHandle: state hdl 10 / socket 131032 NI_INITIAL
[Thr 876] nilh-localCheck: using local address list
[Thr 876] NiIAccept: took local port AD.5C/44380
[Thr 876] NiSetStat: state hdl 10 NI_CONNECTED
[Thr 876] NiIBlockMode: switch off block-mode for hdl 10 / socket 131032
[Thr 876] IcmExternalLogin: Connection request from Client received
[Thr 876] IcmConnCheckStoredClientConn: next client timeout check in 75 sec
[Thr 876] IcmServIncrRefCount: IB2.SERV1.mydomain.com:44380 - serv_ref_count: 2
[Thr 876] IcmQueueAppend: queuelen:     1
[Thr 7876] IcmWorkerThread: worker 9 got the semaphore
[Thr 876] IcmCreateRequest: Appended request 20
[Thr 7876] REQUEST:
    Type: ACCEPT CONNECTION    Index = 19
[Thr 876] IcmConnIntegrateServer: accepted connection from 10.22.4.197 on service 44380
[Thr 7876] CONNECTION (id=0/7):
    used: 1, role: 1, stateful: 0
    NI_HDL: 10, protocol: 16
    host: 10.22.4.197:44380
    status: NOP
    connect time: 01.04.2008 12:38:19
    MPI request:        <0>      MPI response:        <0>
    request_buf_size:   0        response_buf_size:   0
    request_buf_used:   0        response_buf_used:   0
    request_buf_offset: 0        response_buf_offset: 0
[Thr 7876] MPI:0 create pipe 02F60180 1
[Thr 7876] MPI<e>0#1 Open( ANONYMOUS 0 1 ) -> 0
[Thr 7876] MPI<e>0#2 Open( ANONYMOUS 0 0 ) -> 0
[Thr 7876] MPI:1 create pipe 02F60298 1
[Thr 7876] MPI<f>1#1 Open( ANONYMOUS 1 0 ) -> 1
[Thr 7876] MPI<f>1#2 Open( ANONYMOUS 1 1 ) -> 1
[Thr 7876] IcrHostStrToInt: hostname 10.22.4.197 = addr -989587958
[Thr 7876] RoutePlugInStartConn: Accepted connection from client: 10.22.4.197, -989587958
[Thr 7876] RoutePlugInStartConn: masked client ip: 10.22.0.0, 5642
[Thr 7876] IcrClientTabGetEntry: entry->key.client_ip: 5642, inst_name: J2EE2045300
[Thr 7876] RoutePlugInStartConn: tab entry for 10.22.4.197 found: instance->J2EE2045300
[Thr 7876] found matching port: prot=1 vhost=-1 port=50001 f=8
[Thr 7876] IcmIConnPoolAllocEntry: no unused entry for pool 08242D90 found (reuse conn: 0)
[Thr 7876] IcmIConnPoolAllocEntry: try to create new entry for pool 08242D90
[Thr 7876] IcmConnPoolAllocSlot: allocated entry 0999C0D0[0] of pool 08242D90
[Thr 7876] nihsl-getHostAddr: found hostname 'My.SAP.XI.System' in cache
[Thr 7876] nihsi-getHostAddr: hostname 'My.SAP.XI.System' = addr IP.of.My.SAP.XI.System
[Thr 7876] nihsi-getServNo: servicename '50001' = port C3.51/50001
[Thr 7876] NiCreateHandle: state hdl 11 / socket -1 NI_INITIAL
[Thr 7876] NiIBlockMode: switch off block-mode for hdl 11 / socket -1
[Thr 7876] NiLowLevCon: connect to: host IP.of.My.SAP.XI.System, port C3.51/50001, fam 2 (low adr..high adr)
[Thr 7876] NiIInitSocket: set default settings for socket 131024
[Thr 7876] NiISocket: hdl 11 got socket 131024
[Thr 7876] NiPConnect: connect in progress
[Thr 7876] SiPeekPendConn: connection of socket 131024 established
[Thr 7876] NiLowLevCon: took local port 06.9B/1691
[Thr 7876] nilh-localCheck: using local address list
[Thr 7876] NiSetStat: state hdl 11 NI_CONNECTED
[Thr 7876] IcmConnPoolConnect: Connection to host: My.SAP.XI.System, service: 50001 established (nihdl=11)
[Thr 7876] IcmConnPoolNewEntry: created new entry 0999C0D0[0] for pool 08242D90 (nihdl=11, ssl=00000000)
[Thr 7876] ICR: IcrAttachToServer('J2EE2045300' 1 4 1 port:50001/1/0) 0-> 0
[Thr 7876] RoutePlugInStartConn: routing 10.22.4.197 to destination J2EE2045300
[Thr 7876] IcmPlCheckRetVal: Next status: READ_REQUEST(1)
[Thr 7876] IcmReadFromConn(id=0/7): request new MPI (0/0)
[Thr 7876] MPI<e>0#3 GetOutbuf -1 111868 65536 (0) -> 030718C8 0
[Thr 7876] IcmReadFromConn(id=0/7): connection broken (len=0,0)
[Thr 7876] NiICloseHandle: shutdown and close hdl 10 / socket 131032
[Thr 7876] IcmReadFromConn(id=0/7): connection broken
[Thr 7876] PlugInStopConn: close connection
[Thr 7876] PlugInStopConn: shutdown backend connection
[Thr 7876] ConnPoolCloseNiHdl:
[Thr 7876]    Pool Entry: 0999C0D0:
[Thr 7876]    NI: 11, SSL: 00000000, allocated: 1, inuse: 1, desc: 08242DF0
[Thr 7876] NiICloseHandle: shutdown and close hdl 11 / socket 131024
[Thr 7876] IcrDetachFromServer: closing port 50001/1/0
[Thr 7876] IcmConnPoolFreeEntry: free conn pool entry 0999C0D0[0] in pool 08242D90 (nihdl=-1, ssl=00000000)
[Thr 7876] HTR: decrement load factor: 4000 -> 0 (d=4000)
[Thr 7876] ICR: IcrDetachFromServer -> 0
[Thr 7876] MPI<e>0#4 Close( 0 ) del=0 -> 0
[Thr 7876] MpiIFreeAllBuffers(): free 1120360
[Thr 7876] MPI<e>0#6 Delete( 0 ) -> 0
[Thr 7876] MPI<e>0#5 Close( 0 ) del=1 -> 0
[Thr 7876] MPI<f>1#3 Close( 1 ) del=0 -> 0
[Thr 7876] MPI<f>1#5 Delete( 1 ) -> 0
[Thr 7876] MPI<f>1#4 Close( 1 ) del=1 -> 0
[Thr 7876] IcmConnClose: Connection 0/7 closed
[Thr 7876] IcmConnFreeContext: context 0 released
[Thr 7876] IcmServDecrRefCount: IB2.SERV1.mydomain.com:44380 - serv_ref_count: 1
[Thr 7876] IcmWorkerThread: Thread 9: Waiting for event
We checked the J2EE logs on the XI server but we do not see any activity. Is the document making to XI or is this failing in SWD?
Thanks for the help.
PS Here is my SWD config:
Profile generated by sapwebdisp bootstrap
unique instance number
SAPSYSTEM = 5
add default directory settings
DIR_EXECUTABLE = .
DIR_INSTANCE = .
Accessibility of Message Servers
rdisp/mshost = MY.XI.SERVER.IP
ms/http_port = 8110
SAP Web Dispatcher Parameter
wdisp/auto_refresh = 120
wdisp/max_servers = 100
wdisp/shm_attach_mode = 6
configuration for default scenario (medium size)
icm/max_conn      = 500
icm/max_sockets   = 1024
icm/req_queue_len = 500
icm/min_threads   = 10
icm/max_threads   = 50
icm/conn_timeout = 60000
mpi/total_size_MB = 80
#maximum number of concurrent connections to one server
wdisp/HTTP/max_pooled_con = 500
wdisp/HTTPS/max_pooled_con = 500
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=ROUTER,PORT=44380,TIMEOUT=3000
icm/server_port_1 = PROT=HTTP,PORT=64000
icm/HTTPS/verify_client=0
SAP Web Dispatcher Web Administration
icm/HTTP/admin_0 = PREFIX=/sap/wdisp/admin,DOCROOT=./admin,AUTHFILE=icmauth.txt
Edited by: Joe Wright on Apr 1, 2008 7:51 PM

Hi
Did you check the connectivity i.e web dispatcher with any other system(LandScape).
For example CRM for FICO.
Thanks
Sukrut S

FBL1N not picking up customer itesm

Hi Guru,
could you please share your expeirence is such issue where we are running FBL1N, Vendor line item report with selection creterion for Customer Lines apart from Normal items.
Normally system picks up Vendor line items and also customer line items, if customer and vendor are linked to each other. but in a particular case system is not picking up customer lines, its only showing vedor lines. Also when I run FBL5N for customer which is linked to same vendor where there is a problem, system work correctly and it shows customer lines as well as vendor lines.
It would be great if you can suggest your idesa as to why system is behaving in such a way.
Thanks & regards,

Hello,
You might check if there is some archived information. Select the option
"Data Sources" and setting the flag for the "Archive" data.
Best Regards

SAP web AS not picking up my custom actions defined jar

Similar Messages

Maybe you are looking for