SAP Web Page Composer: Editor exception iFrameObject == null
Hello everybody!
Yesterday we updated the Web Page Composer from 7.00 SP18 Patch 6 to 7.00 SP25. Everything works fine but wenn trying to save something in the editor, this pop-up appears:
"km_exception: !iFrameObject || iFrameObject == null"
Do somebody know what could be the problem?
Kind regards
Georg
Hi Naga,
Sorry for missunderstanding. Now I have got what you mean. So may be if we update the KMC-UI to the same SP level this iusse should be solved.
But first I have another question may be related to this iusse. In the SAP Note 1080110 you get the Information how to install or update the Web Page Composer.
"To update WPC from SAP NetWeaver 7.0 SPS 13 to a higher SPS of SAP NetWeaver 7.0, perform the following two additional steps after you have finished with the procedure described above.
- Run a content migration report in KM. This report will migrate the standard web resources created with WPC SP13. [...]"
After the update we did not do this content migration report and I actually do not know what this report ist about. Could this be the problem?
Thanks in advance!
Georg
Similar Messages
-
SAP Web Page Composer: Detailed Navigation is not getting built
Hello!
I am new at this forum. At first I´d like to say hello to everybody! :]
Our issue concerns the following:
We started to work mit the Web Page Composer to build websites für our workers. Everything worked fine until the detailed WPC-navigation is not getting built anymore. We have this issue after a portal restart. Every steps to build and publish a website were done the right way.
1. Publish navigation und paste it to the external connector of the role in the form "wpcnavigation:///wpcontent..."
2. Permissions and security zones were set. Even the super admin is not able to see the detaild navigation anymore.
It is still possible to put single webpages to iViews and then to display them in the portal. And every function of the Web Page Composer works fine. The caches are deactivated. I tried to build a new site with new pages and a new navigation but there is the same problem, no detailed navigation is shown in the portal navigation. The role is assigned to a user and he can see the role at the top navigation but when clicking on it no detailed navigation appears, just a blank page.
As I mentioned this iusse appears after a portal restart. What could be the problem?
Thank you in advance!
Best regards
GeorgHello Sandeep!
I created a new role and also did the Initial Configurations but it still does not work. May be there is a problem with the external connector where I connect the WPC navigation with the portal navigation? I know it sounds confusing but is there may be a way I could "reset" the WPC configuration? Because at the moment I tried to merge roles the system saved "some configuration" and started to avoid displaying the detailed navigation. So if could delete/reset/change this configuration, it could be that the navigation will be displayed again? I do not unterstand, if I just use one role and so avoid merging roles it just should work again? Or I am on the wrong way? Hopefully I am not telling bull**** right now! :]
At this moment our system running SAP NetWeaver 7.00 SP18. The patch is only available at least SAP NetWeaver 7.00 SP20. We are probably going to upgrade in october to SAP NetWeaver 7.00 SP23 and then we can update the WPC, too. Our Basis said, I have to wait till october. Before this upgrade no updates will be done.
Thanks for your help so far!
Kind regards!
Georg
Edited by: GBrauer on Aug 30, 2011 9:21 AM -
Pictures not loaded in a Web Page Composer site without admin role
Hello!
I have got an new problem concerning SAP Web Page Composer.
I have created an new site with some paragraphs and some pictures. The problem is when I, with admin role, access this site I am able to see everything. When another user, without admin role, is trying to access this site he is able to see everything but the pictures. All paragraphs or linklists are displayed but the pictures are not available. When giving the user the admin role he also become able to see the pictures.
I know it is a permisson problem but not know where I forgot to set the permissions to "every user". But I do not understand why this is only concerning the pictures and every other Web Page Composer element is displayed properly, although the pictures permissions set to the same as the other elements. When trying to access the pictures by the user without admin role NetWeaver is throwing following exception:
"com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): portal_content/every_user/general/eu_role/com.sap.km.home_ws/com.sap.km.hidden/com.sap.km.urlaccess/com.sap.km.docs)"
Thanks for your help in advance!
Regards
GeorgThe whole exception:
[EXCEPTION]
com.sapportals.portal.prt.runtime.PortalRuntimeException: Access is denied: pcd:portal_content/every_user/general/eu_role/com.sap.km.home_ws/com.sap.km.hidden/com.sap.km.urlaccess/com.sap.km.docs - user: Manager,
at com.sapportals.portal.prt.deployment.DeploymentManager.getPropertyContentProvider(DeploymentManager.java:1932)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:234)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:316)
at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:387)
at com.sapportals.portal.prt.connection.PortalRequest.getRootContext(PortalRequest.java:488)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:607)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.wcm.portal.connection.KmConnection.handleRequest(KmConnection.java:52)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): portal_content/every_user/general/eu_role/com.sap.km.home_ws/com.sap.km.hidden/com.sap.km.urlaccess/com.sap.km.docs)
at com.sapportals.portal.pcd.gl.PcdFilterContext.filterLookup(PcdFilterContext.java:422)
at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1248)
at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookupLink(PcdProxyContext.java:1353)
at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookup(PcdProxyContext.java:1300)
at com.sapportals.portal.pcd.gl.PcdProxyContext.lookup(PcdProxyContext.java:1067)
at com.sapportals.portal.pcd.gl.PcdGlContext.lookup(PcdGlContext.java:68)
at com.sapportals.portal.pcd.gl.PcdURLContext.lookup(PcdURLContext.java:238)
at javax.naming.InitialContext.lookup(InitialContext.java:347)
at com.sapportals.portal.prt.deployment.DeploymentManager.getPropertyContentProvider(DeploymentManager.java:1919 -
Runtime Error in Web Page Composer (WPC) : Page Editor
Hello,
We are using the Web page Composer to design our portal homepage. The portal version is 7.02 SP6.
We created a site, some site content like banners and articles, and a blank web page. When we try to add the site content to the web page from the "Page Editor" by clicking on the pencil icon -> "Add", a runtime error occurs on the Web Content Browser pop up page. The drag and drop feature to add content is not working either.
The error message is as follows:
Runtime Error
An exception occured while processing the request.
Additional information: null
Exception ID = 0076b5e1-fea6-2e10-b49e-9e1f27bd085c
Runtime Error
An exception occured while processing the request.
Additional information: null
Exception ID = 30ebb5e1-fea6-2e10-7d8e-b34b3229cd35
ANy idea what the problem could be?
Thanks and Regards,
ReenaHello,
Below is an extract from the trace file for the exception ID:
Exception ID = 60843375-7baa-2e10-2097-c764acd6ad4c java.lang.NullPointerException
at com.sapportals.wcm.portal.component.base.ControllerComponent.prepareRequest(ControllerComponent.java:229)
at com.sapportals.wcm.portal.component.base.ControllerComponent.getPage(ControllerComponent.java:124)
at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:114)
at com.sapportals.wcm.portal.component.base.ControllerComponent.doContent(ControllerComponent.java:83)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:545)
at java.security.AccessController.doPrivileged(AccessController.java:246)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:434)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Any clue?
Regards,
Reena -
Exception while trying to create an article in Web Page Composer
Hi Experts,
I'm new to Web Page Composer.
When I try to create an article in the folder 'Cross-Site-Content', a pop-up opens up and the following error is thrown:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com/sap/nw/kmc/readonly/ReadOnlyModeException.
Exception id: 03:46_30/01/10_0007_307377350
See the details for the exception ID in the log file
When I check the log file in C:\usr\sap\F48\JC30\j2ee\cluster\server0\log, the following trace is shown:
Caused by: java.lang.NoClassDefFoundError: com/sap/nw/kmc/readonly/ReadOnlyModeException
at com.sap.nw.wpc.editor.EditorTool.getPage(EditorTool.java:59)
at com.sapportals.portal.htmlb.page.PageProcessorComponent.getPage(PageProcessorComponent.java:193)
at com.sapportals.portal.htmlb.page.PageProcessorComponent.doOnNodeReady(PageProcessorComponent.java:62)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:368)
at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:642)
... 21 more
Please advise
Regards,
NitinHi Nitin.
At first, I suggest checking for a documentation regarding a configuration has made for WPC repository and components, because logically it seams that in your company scenario Cross-site content folder intended for storing only image files.
At second, check configuration parameters of web resources for an Article and Banner forms. In standard configuration of both resources the parameter Allowed RIDs contains /wpccontent/Cross-site Content/** (refer to the [help.sap.com|http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/45/fef92d98f13830e10000000a11466f/frameset.htm]).
Hope it helps.
Best regards,
Aliaksandr Zhukau -
Web Page Composer for SAP Netweaver CE 7.1 !
Hi ,
I am working on SAP Neteweaver CE 7.1 and I want to know that whether the Web Page Composer component for Portal is also available for SAP Netweaver CE 7.1 as it also has an embeded Portal installation.
Please reply ASAP.
ManishHi,
Currently WPC is not part of CE 7.1 (neither is any part of KM). However, AFAIK it may be included in a future release of CE.
Regards,
-- Vladimir -
Web Page Composer - FAQ Web form
Hello Everyone,
Hello SDN community,
This forum thread is intentionally created to collect your feedback and ideas regarding the FAQ Web form.
With this new Web form you can easily create and manipulate FAQ documents in a structured manner.
For more information regarding this new Web form and its features adn to download it visit this address: [https://wiki.sdn.sap.com/wiki/display/KMC/CustomizingtheWebPageComposer]
Your constructive suggestions will help to evolve the Web form further and facilitate the community to create more sophisticated and enhanced versions of this basic reference implementation. Feel free to contribute also your version and discuss in public.
Here are some basic questions that can guide you:
1. Does this new Web form help in your particular scenario? How?
2. How would you rate from 0 to 5 your satisfaction with this particular Web form?
3. What can be improved in the Web form?
4. Do you miss something from documentation point of view?
Explore the new WPC wiki pages - find all the information regarding WPC at one place, download new Web forms, and feel free to contribute.
[Web Page Composer Wiki|https://wiki.sdn.sap.com/wiki/display/KMC/WebPageComposer]
Best Regards,
WPC team @ SAPHi Georgi,
I was trying to create a FAQ Custom Editor using your How To Guides.
I am facing a problem as already stated in the thread:
https://www.sdn.sap.com/irj/scn/thread?threadID=1244125&tstart=0
To be more specific, initializeFromPageContext function of FAQComponent.java file, @ the line
question =(TextEdit) context.getComponentForId(Question_ + editorObject.getId());,
+context.getComponentForId(Question_ + editorObject.getId())+ is returning Null
Regards,
JK -
Web Page Composer - Web Form for exposing iViews and External Web Pages
Hello SDN Community,
This forum thread is intentionally created to collect your feedback and ideas regarding the Web form for exposing iViews and external Web pages.
With this new Web form you are able to specify height and width of the iFrame, in which the corresponding iView/external Web page will be displayed on the particular WPC Web page.
For more information regarding this new Web form and its features and to download it visit this address: https://wiki.sdn.sap.com/wiki/display/KMC/CustomizingtheWebPageComposer
Your oppinon and constructive suggestions will help to evolve the Web form further and facilitate the community to create more sophisticated and enhanced versions of this basic reference implementation. Feel free to contribute also your version and discuss in public.
Here are some basic questions that can guide you:
1. Does this new Web form help in your particular scenario? How?
2. How would you rate from 0 to 5 your satisfaction with this particular Web form?
3. What can be improved in the Web form?
4. Do you miss something from documentation point of view?
Explore the new WPC wiki pages - find valuable the information regarding WPC at one place, download new Web forms, and feel free to contribute.
[Web Page Composer Wiki|https://wiki.sdn.sap.com/wiki/display/KMC/WebPageComposer]
Best Regards,
WPC team @ SAPHello!
I have installed your component. When I try to create a new component in WPC with this form, portal throws an exception
Full Message Text
05:54_30/07/09_0005_21710350
[EXCEPTION]
java.lang.NullPointerException
at com.sap.nw.wpc.editor.EditorBean.updateDocumentFromContext(EditorBean.java:336)
at com.sap.nw.wpc.editor.EditorBean.getPreview(EditorBean.java:600)
at pagelet.editor._sapportalsjsp_editor.subDoContent(_sapportalsjsp_editor.java:1802)
at pagelet.editor._sapportalsjsp_editor.doContent(_sapportalsjsp_editor.java:58)
at pagelet.editor._sapportalsjsp_editor.service(_sapportalsjsp_editor.java:38)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.service(PortalComponentItemFacade.java:360)
at com.sapportals.portal.prt.core.broker.PortalComponentItem.service(PortalComponentItem.java:934)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:435)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:527)
at com.sapportals.portal.prt.component.AbstractComponentResponse.include(AbstractComponentResponse.java:89)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:232)
at com.sapportals.portal.htmlb.page.JSPDynPage.doOutput(JSPDynPage.java:76)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:129)
at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)
at com.sap.nw.wpc.editor.EditorTool.doContent(EditorTool.java:55)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Do you have any ideas? I am running EP7 SPS 15
Thanks in advance -
The font size in web page composer 7.3
Hello,My corporate is using SAP NetWeaver Portal 7.3 now.
I want to use Web Page Composer 7.3 to build a firstpage for my company,but I find a strange problem.
When I create a web form,for example Link List or Paragraph,after I preview ,the disalpy font size is very big.
but I remember in the release 7.0 the font size is very proper.
I find the types configures ( km > etc > wpceditor > types) is the same in both release7.0 and 7.3
Now I don't konw what to do ,anyone can help me ?
Thanks a lot!
Best regards!
lexian.Hi,
now we have the tinyMCE editor, where you can insert and edit html-code. It works fine now for the layout,
but there are still a few problems with the links..
In the edit mode there are displayed all km images out of the km. But the images aren't displayed under the portal role, when i publish the page. And all the links like one to a wiki or the TBN links doesn't work, too.
Can anybody help me further?
Thanks in advance,
Lydia -
Web Page Composer (WPC) – Web page - Approval process
We have requirement with our web publishing environment where we want to stage the web pages for review before they are published for public. Currently, if you develop a web page in Web Page Composer ( WPC ) and click publish to review the content/layout. The page is published for public and included in TRex and can be searchable.
We thought KM Approval process will help resolve this issue. The approval process work very well with the u2018Site Contentu2019 where once author develop the content (article, paragraph etc.) and submit for approval in this case Editor (role). The content under site content folder is not published (not available for public) until approved by Editor.
This same approval process does not work on the Web Page folder. We have exactly same permission/ Service permission setup on the Web Page folder. Even though the u2018Approvalu2019 is turned on the Web Page folder it does not inherit the same to new web pages created or existing web pages in that folder. If we go and turn on the u2018Approvalu2019 on a page then we see a u2018Approvalu2019 button in WPC but when you submit the page for approval it pops up another screen with below message.
Confirm that you want to publish the page. A new version of the homepage will be created and, if appropriate, submitted for approval. Changes to pages not subject to approval are active immediately.
When you confirm this message nothing happens (no workflow kicks off).
I would like to hear if any one has tried the approval process on WPC web pages. If you are not using this process how you are staging the web page for review before publishing to public.
Thanks.Hi Bertina,
We encountered the same problem couple days back in our environment. There is a SAP note (# 1294833) which details the issue but affected version indicated in this note is different then what we are on so we decided to create a note for SAP.
Below is SAP response for this issues
13.09.2010 - 08:52:12 CET - Reply by SAP
Dear customer,
I can confirm that the issue described in SAP Note 1294833 is indeed
present in EP 7.01 SP4 and is the reason you are currently experiencing
this problem.
Unfortunately, as outlined in the note, there is no workaround
available but our developers have advised me that the fix will be
included in the next patch for KMC WEB PAGE COMPOSER 7.01 SP04.
Hope this helps. -
hello,
i've created a site with the help of this blog:
"Web Page Composer - a new Way to create and publish Web Pages in the Portal"
Web Page Composer - Web Page Layout (Part IV)
Web Page Composer - the XML Editor Framework (Part II)
Web Page Composer how easy it is to create and publish a web page (Part III)
Web Page Composer - Web Page Layout (Part IV)
i have published it, asigned the role to some users and the content is only seen by those who have super admin role to.
pls help
thxHi there,
i found the solution:
the solution is to modify the permission on security zone in this way:
go to System Administration -> Permissions ->Security Zones -> com.sap.nw.wpc -> wpc -> no_safety and open the permissions of this object to add Authenticated Users gruop with this option:
Authenticated Users (Group) : read
Katayoun Mahpour -
Want to Learn Web page composer ?
Hi Experts,
I want to learn Web Page composer .....
Can you please send me some documents or guide me in some way how can I start to learn Web Page Composer.
Any Help will be appreciated.
Thanks,
IqbalIgbal:
I recommend you a good blog serie; from Christopher Kaestner
"Web Page Composer - a new Way to create and publish Web Pages in the Portal"
Web Page Composer - Web Page Layout (Part IV)
Web Page Composer - the XML Editor Framework (Part II)
Web Page Composer how easy it is to create and publish a web page (Part III)
Web Page Composer - Web Page Layout (Part IV)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/904b071d-79e4-2910-70a9-f62a9004d9ad
Others useful links:
A fundamental presentation:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90347add-ad06-2a10-81a0-e613acff5236
Introduction to the Web Page Composer:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d07b5354-c058-2a10-a98d-a23f775808a6
I hope this help you
regards, -
Hi All,
Can anyone tel me the exact link from where Web Page Composer can be downloaded , My portal is running on SP12 .I have gone through SDN but could not find any pointers.
Points will be awarded for helpful answer.
Thanks
PankajHi Experts,
I am facing problem in deploying WPC in EP System. Here we have SPS20. and i am trying to deploy KMCWPC20_0-20002294.SCA but i am facing the below error.
Nov 9, 2010 7:17:23 PM Info: -
Starting validation -
Nov 9, 2010 7:17:23 PM Info: Prerequisite error handling strategy: OnPrerequisiteErrorSkipDepending
Nov 9, 2010 7:17:23 PM Info: Update strategy: UpdateLowerOrChangedVersions
Nov 9, 2010 7:17:23 PM Info: Starting deployment prerequisites:
Nov 9, 2010 7:17:52 PM Info: Loading selected archives...
Nov 9, 2010 7:17:52 PM Info: Loading archive '/usr/sap/trans/EPS/in/JAVA_PATCH_20/KMCWPC20_0-20002294.SCA'
Nov 9, 2010 7:17:52 PM Error: Exception occured during extractSingleFile: invalid entry size (expected 62533 but got 62532 bytes)
Nov 9, 2010 7:17:52 PM Info: Selected archives successfully loaded.
Nov 9, 2010 7:17:52 PM Error: No Software Component Archive (SCA) or Software Delivery Archive (SDA) selected. Select at least one.
Deployment will be aborted.
Nov 9, 2010 7:17:52 PM Error: Prerequisites were aborted.
Nov 9, 2010 7:17:59 PM Error: Error while creating deployment actions. No Software Component Archive (SCA) or Software Delivery Archive (SDA) selected. Select at least one.
Deployment will be aborted.
Nov 9, 2010 7:18:06 PM Info: -
Ending validation -
Could any body will give me suggesstion for this.
Thanks & Regards,
Arun -
Web Page Composer - Creating Frontpage
Hi!
I'm trying to create a frontpage with the web page composer and have some questions. Is it possible to create a normal article and only display the introtext and if you click on it you get to the full article. I think there must be an option to adapt multiple xsl rendering files to the containers in the page layout and other xsl rendering files for the full article view. Or do i have to create a shor article and a normal article and show the short article on the front page and create a link to the full article, but this is not really effective. I have read all articles about the web page composer but didn't find any conclusion.
Another question is about the iviews. I managed to create an entry point for iviews, but if I assign an ivew to a container, the front page automatically redirects to a new page with the iview in it. I wanted to integrate a calendar iview. Is there any tutorial for this, didn't find one.
Thank you very much.Ponraj -
Procedure
1. In the Web Page Composer, navigate to the Web page that you want to integrate into the portal navigation.
2. To copy the path to the Web page to the clipboard, choose Copy Path from the context menu for the Web page.
3. Choose Content Administration → Portal Content.
4. Choose New → iView from the context menu of a folder.
5. Choose Portal Component as the source type.
6. Choose the com.sap.nw.wpc.runtime portal archive. On the next screen to appear, choose default.
7. Once you have created the iView, choose the Web Page Composer category in the property editor.
8. In the RID of Compound Document property, enter the path to the KM folder representing the Web page.
Example: /wpccontent/Sites/MyWebSite/Web Pages/MyWebPage
You can paste this path from the clipboard.
9. Open the workset or role that you created when you carried out the initial configuration.
10. To add the iView to the workset or role, choose Add iView to Workset/Role → Deltalink from the context menu of the iView. -
Web page composer for creating static pages
Hi there,
I have a scenario where I need to develop static pages in Web page composer. That is I dont want to build a complete site but only static pages. And then I want to enable the Approval workflow from KM for these static pages. Can someone throw some light on this how I can acheive?
Regards,
Ponraj MPonraj -
Procedure
1. In the Web Page Composer, navigate to the Web page that you want to integrate into the portal navigation.
2. To copy the path to the Web page to the clipboard, choose Copy Path from the context menu for the Web page.
3. Choose Content Administration → Portal Content.
4. Choose New → iView from the context menu of a folder.
5. Choose Portal Component as the source type.
6. Choose the com.sap.nw.wpc.runtime portal archive. On the next screen to appear, choose default.
7. Once you have created the iView, choose the Web Page Composer category in the property editor.
8. In the RID of Compound Document property, enter the path to the KM folder representing the Web page.
Example: /wpccontent/Sites/MyWebSite/Web Pages/MyWebPage
You can paste this path from the clipboard.
9. Open the workset or role that you created when you carried out the initial configuration.
10. To add the iView to the workset or role, choose Add iView to Workset/Role → Deltalink from the context menu of the iView.
Maybe you are looking for
-
How to use ANCESTOR function in BPC NW
I need to calculate averagre NetSales rate and so forth at product category level which is send level in the product hierarchy and three levels above base level product. I am using following MDX logic to calculate this average and store at every pro
-
How to get the currency of the logged in user using an el expression
I want to get the currency of the logged in user using an el expression. I can get the same using ApplSessionUtil.getCurrency(). But can i get the same using an el exprssion?. I want to use this el expression for setting the default value of a VO att
-
Accessing discoverer viewer over internet
URL's host name is changed when i am clicking to expand report link for work sheet selection. I have installed Oracle 10g AS and discoverer and trying to access work sheets over internet using discoverer viewer.
-
cs6 opening existing file defaults to last new size created. How do I keep my file properties / size the same?
-
How to see my password if I have set automatic login in my computer
I have forgot my password and can't access the email address I registered my account because it is my previous company's email. But I have set automatic login in my personal computer. Pls advise how I can recall my password. thanks!!