SAP with tablet PC XP edition

Hi,
Does SAP work with tablet PC XP edition on a tablet PC?
Have any of you tried?
I am thinking of buying a tablet PC but concerned if SAP can be run on it!
Thanks.

Hi Krishen,
I have many collegaues who are using tablet PC and have SAP 6.40 installed on them. If the config is good i dont see any reason why it should not work.
Cheers
VJ

Similar Messages

  • Error when connect to SAP with JCo Connector on linux

    Dear all,
    Please, i need help. i was tray to connect to SAP with SAP JCo on linux ubuntu, but i have an error.
    this is the error :
    com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
    Connect_PM  GWHOST=myhost, GWSERV=sapgw00, ASHOST=myhost, SYSNR=00
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       hostname 'avatar-bumi' unknown
    TIME        Thu Feb 14 15:25:48 2008
    RELEASE     640
    COMPONENT   NI (network interface)
    VERSION     37
    RC          -2
    MODULE      niuxi_mt.c
    LINE        388
    DETAIL      NiPGetHostByName2: hostname 'avatar-bumi' not found
    SYSTEM CALL gethostbyname_r
    ERRNO       110
    ERRNO TEXT  Connection timed out
    COUNT
            at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeConnect(Native Method)
            at com.sap.mw.jco.rfc.MiddlewareRFC$Client.connect(MiddlewareRFC.java:1125)
            at com.sap.mw.jco.JCO$Client.connect(JCO.java:3138)
            at sapjco.Main.main(Main.java:34)
    Exception in thread "main" com.sap.mw.jco.JCO$Exception: (121) JCO_ERROR_NULL_HANDLE: Invalid rfc_handle = NULL encountered
            at com.sap.mw.jco.rfc.MiddlewareRFC.nativeGetAttributes(Native Method)
            at com.sap.mw.jco.rfc.MiddlewareRFC$Client.getAttributes(MiddlewareRFC.java:1233)
            at com.sap.mw.jco.JCO$Client.getAttributesInternal(JCO.java:2940)
            at com.sap.mw.jco.JCO$Client.getAttributes(JCO.java:2994)
            at sapjco.Main.main(Main.java:38)
    How to resolve this error....
    Regards,
    Lisa
    Edited by: Lisa Yanti on Feb 14, 2008 9:35 AM

    I was resolve this error by my self.
    We can handle this error with registering our current IP and host name on /etc/hosts.
    example:
    content of /etc/hosts:
    127.0.0.1 localhost
    127.0.1.1 myhost.workgroup
    The following lines are desirable for IPv6 capable hosts
    ::1 ip6-localhost ip6-loopback
    fe00::0 ip6-localnet
    ff00::0 ip6-mcastprefix
    ff02::1 ip6-allnodes
    ff02::2 ip6-allrouters
    ff02::3 ip6-allhosts
    added the ip and host name to be like this configuration
    127.0.0.1 localhost
    127.0.1.1 myhost.workgroup
    172.20.17.74 myhost
    The following lines are desirable for IPv6 capable hosts
    ::1 ip6-localhost ip6-loopback
    fe00::0 ip6-localnet
    ff00::0 ip6-mcastprefix
    ff02::1 ip6-allnodes
    ff02::2 ip6-allrouters
    ff02::3 ip6-allhosts

  • Connecting SAP with an independent SQL database

    Dear all,
    I need to connect SAP with an independent MSSQL database.
    My requirement is to transfer a set of records from my Ztable to a table in SQL database.
    I have maintained the settings in DBCO transaction. I maintained DBMS as 'MSS' in DBCO.
    send some sample code of how to establish the connection. Is it possible to write data in to SQL database.
    How to edit the file tnsnames.ora in application server directories. I heard that for connecting to an oracle database we need to edit this , is it necessary to edit this tnsnames.ora even for connecting with SQL database?
    Thanks in advance.
    Lakshman

    This is not possible.
    My suggestion is that you create shell scripts on the unix side that copy the data to the other database.
    ARD runs it's own private copy of PostGgreSQL inside the package so it won't interfer with any other SQL databases on the network or even on the machine.

  • Add purchase order in SAP with sdk

    Hi Experts:
    I am doing  an aplication for to export a purchase order to SAP with the SDK and I need to read the  document number of the last purchase order that was added.
    Wich method can I use?
    Thanks.

    Hi Silvia,
    You can use the GetNewObjectKey method right after you have created a new document. You can then get the DocNum using the GetByKey method.
    Here an example in VB.NET (if you use C#, it is easy to translate):
    'We declare a new document of type delivery
    'and set all the necessary properties and values
    'We then add the new delivery note
    If oDeliveryNote.Add = 0 Then
         Dim tmpDel As Documents = vCmp.GetBusinessObject(BoObjectTypes.oDeliveryNotes)
         'Then using the GetByKey method together with the GetNewObjectKey method,
         'we can get all kinds of interesting info about the newly created delivery note
         If tmpDel.GetByKey(vCmp.GetNewObjectKey) Then
              'Let's populate some variables that we declared earlier
              DelNr = tmpDel.DocNum
              NumAtcard = tmpDel.NumAtCard
              CardCode = tmpDel.CardCode
              DocType = tmpDel.UserFields.Fields.Item("U_type").Value
        End If
    End If
    The same code applies to all document types.
    Good luck,
    Johan
    Edited by: Johan Hakkesteegt on Feb 13, 2012 12:19 PM

  • Install License Key for SAP NetWeaver 2004s ABAP trial Edition.

    Hello.
    I have two installations of the SAP NetWeaver 2004s ABAP trial Edition (on desktop and laptop). After the expiration of the original 30 days license; now I need to install the extended License (90 days). I am using SLICESE transaction from SAP* user account to install the new license.  I have got the "License Key" from SAP website. However, <b>the installation of the new License Key fails to complete successfully</b> (it fails to add the new license key) and ends with an error prompt.  This problem is happening on both systems! <b>Has anyone experienced such problem?</b> What did you do to fix it?
    Note: no errors in typing in the new Key, as I used the copy and paste!
    Thank you very much for your help.
    Hameed

    Rich,
    Thanks again for your help. I found out that if you try to install the new license key  (first time) with any error (such as wrong expiration date), it will fail as "invalid key", naturally. However, the subsequent attempts also continues to fail despite the fact that the correction are made. the only way I could fix this was to stop and restart the SAP Application server and make sure that the first attempt has typos. <b>It seems to me that once an error flag is set, it is not removed unless the server is restarted.</b> well, the problem is fixed now and thank you for your help.
    Hameed

  • Install problem - SAP Crystal Dashboard Design, departmental edition

    I download a departmental edition trial version and I tried install it.
    When finish a message said the installing was fine but then apears another message "Missing installdir reg key for installinverse, required for uninstall.
    Key: SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Installer\aurora
    Value: Path"
    Then another message saying a Runtime Error.
    I have a windows 7 ultimate 64 based with a 2010 SP1 Office 32 edition.
    Thanks in advance
    Rui
    Edited by: SuperRato on Jun 28, 2011 2:53 PM
    Edited by: SuperRato on Jun 30, 2011 10:19 AM
    Edited by: SuperRato on Jun 30, 2011 10:22 AM

    Hi,
      Please look to it:
        http://scn.sap.com/thread/3261354Re: Install problem - SAP Crystal Dashboard Design, departmental edition
      Put your attention on my last comment on security updates to C++ libraries - don't install them.
    Best regards,
    Denis

  • SAP Crystal Dashboard Design Personal Edition - Lifeoffice available

    We like to build a dashboard on Crystal Report Server
    We wanted use the CRS + SAP Crystal Dashboard Design Personal Edition + CR or CRS + the package (CR + CX)
    Does that include the lifeoffice Connecion?
    Thanks for help
    Beat Honegger

    No direct way.  But I had a similar requirement.  Our team updates a central spreadsheet and our managers wanted to have a dashboard to reflect information entered on it.  I ended up writing a VBA Macro using an XSD schema to use Excel XML Maps to export the spreadsheet data to .XML at the click of a button.
    Then, in an Xcelsius model, I imported that same Excel XML Mapping .XSD schema into my model, and pointed it to the location of the exported XML file to then have "live" data whenever the source Excel file was saved.  It seems an around the world way to get to Excel data (albeit in a separate file), seeing as the tool was originally written with Excel being the central focus. 
    There's also a more lengthly route to do it, but treating the Excel file as an ODBC source for a Crystal Report which Live Office will recognize which you can then use as a connection to Xcelsius, but that seemed even more painful for our purposes but in theory works.

  • Need integration of sap with documentum

    can any one tell me how to integrate sap with documentum.
    need urgently.
    can any one tell me the procedure?
    thaks&regards,
    babu.
    <THREAD LOCKED. Please read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] to discover why>
    Edited by: Mike Pokraka on Jan 27, 2009 10:28 AM

    Integration ?
    Not clear with what exaclty you mean by intergration ,
    Do you want  how to integrate workflows with SAP or any thing other than this
    [Check This|http://help.sap.com/saphelp_nw70/helpdata/EN/a1/172437130e0d09e10000009b38f839/content.htm]

  • Problem trying to download SAP Mobile Platform SDK - Developer Edition

    Dear All,
    when i try to go on:
    SAP Mobile Platform Developer Center
    and I click on:
    Download SAP Mobile Platform SDK - Developer Edition
    The system is returning to me:
    Forbidden
    You don't have permission to access /sap/cp/ui/resources/store/html/SolutionDetails.html on this server.
    What I have to do?
    Thanks

    This download link is related to SAP Store and I guess there is some issue with SAP Store now. (store.sap.com) .
    Anyways the link might provide access to only SDK of SMP 3.0 , but to develop mobile applications on SMP both the Runtime and SDK are to be installed and only SDK is available to public.
    If you have a valid S-User credentials you can download SMP from SAP Service Marketplace - Home
    Softwares Donloads -->  A-Z Index --> M -->SAP mobile Platform -- ? choose the version you are looking at (2.1 / 2.2 /2.3 )
    SMP 3.0 is still in Rampup only available to limited registered partners
    Which version of SMP you are looking to download?

  • Reg Advice for SAP with RFID..

    Hello Friends,
    I am totaly new for RFID concept. now i want to do some project in SAP with RFID. so can u give me some guidance for SAP with RFID and how to go further for that. i mean what is the way for go further in SAP.. and plz tell me some good links wher i can find some material for RFID and its use with SAP.
    Thanks in Advance.
    Marmik

    Hi marmik,
    I am compiling some of my previous replies to
    queries on similar lines probably would help you....
    1.RFID-What is it's purpose!
    Radio Frequency Identification (RFID) is a
    state-of-the-art technology for extensive
    identification of every type of object.
    It enables rapid and automatic data acquisition
    via radio waves.At its most basic level, Radio Frequency Identification ( RFID ) is a wireless
    link to uniquely identify objects or people.
    RFID is a means of capturing data about an object without using a human to read the data.
    The object of any RFID system is to carry data in suitable transponders, generally known as tags,
    and to retrieve data, by machine-readable means,
    at a suitable time and place to satisfy particular application needs. Data within a tag may provide identification for an item in manufacture,
    goods in transit, a location, the identity of a
    vehicle, an animal or individual.
    Where it will be used mainly.
    RFID is becoming more popular in applications
    where other identification technologies, such as barcodes, are no longer sufficient
    (e.g. logistics, material management,
    industrial automation, services etc.).
    POSSIBLE COMMERCIAL APPLICATIONS OF THIS SYSTEM
    • Electronic Article Surveillance(EAS)
    • logistics
    • Asset Management
    • Waste Management
    • Yard Management
    • Fare Collection
    • Animal Identification
    • Luggage Tracking in Airports
    • Industrial laundries
    • Fugitive Emission Detection
    • Totes/Conveyor
    • Vehicle Identification
    • Automotive Anti-theft
    • Employee Identification
    The list continues.It can be used in man
    Advantages of RFID:
    • Contactless identification
    • Reads through many materials like cardboard,
    wood etc.
    • Unlimited reading and writing of the memory
    • Identification takes less than a second
    • Simultaneous reading of various transponders
    • Resistant to harsh environmental conditions,
    such as extreme temperature, humidity etc.
    • Shape and size of the transponders can be
    adapted as desired
    • Transponders can be completely integrated
    into a product
    •High security due to copy and password
    protection or encrypted data communication
    RFID Adoption (RFID Now)AND Growth Prospects
    RFID DEVICES are beginning to replace
    magnetic-stripe security cards for unlocking
    doors and granting access to secured areas—
    especially at facilities with special security
    needs, such as military installations.
    The most visible use of RFID, though, is
    probably the automatic toll payment systems
    that rely on readers at toll plazas to scan
    tags attached to the windshields of passing
    cars. The reader records the tag’s ID and then
    deducts money from a prepaid account.
    These systems are designed to allow cars to
    zip through toll plazas ideally without stopping
    or even slowing down very much .Known as
    E- ZPass in New York, New Jersey, Delaware and
    other states, as FasTrak in California, and by
    different names elsewhere, RFID-based automatic
    toll systems have been operating for several years.
    RFID Growth Prospects(RFID FUTURE)
    Why the RFID market is set to expand rapidly
    1.Auto-ID Center at MIT produced standards: EPC,
    Air-protocol, Savant, ONS.
    2.Cost of tags is dropping rapidly
    3.The coming RFID tsunami is real and it has
    two mega-sized supply buyers written all over it:
    Wal-Mart and the DoD.
    Walmart, the worlds largest retailer, and the
    US Dept of Defense (DOD), are two powerful
    entities that have launched initiatives to
    implement RFID in their logistics operations,
    motivated by their needs to cut costs and
    streamline their supply chain in their
    organizations.Wal-Mart has mandated that
    its top 100 suppliers adopt RFID for palettes
    and cases by January 2005.
    4.In the coming years, Radio Frequency
    Identification (RFID) could have a major
    impact on any enterprise involved in the
    production, movement, or sale of physical
    goods. RFID's unique attributes will enable
    new applications and radical changes to business practices. RFID technology is a powerful
    Auto ID solution that can significantly
    increase efficiency and productivity.
    Implementing an RFID solution requires a
    thorough understanding of the capabilities and limitations of this emerging technology.
    So the future is absolutely very bright
    SAP RFID Solution Package
    The SAP RFID solution package provides a
    complete auto-ID middleware solution connecting
    RFID data directly from auto-ID data capture
    sources, such as RFID readers and device
    controllers, and integrates the data directly
    into enterprise applications . It converts
    raw RFID data into  business process
    information by making the associations from
    key business rules, master data, and transactions
    to raw RFID data .
    SAP-RFID
    SAP’s RFID solution is packaged as a standalone
    solution package built on top of SAP Web
    Application Server 6.40, and consists of:
    • SAP Auto-ID Infrastructure
    • SAP Event Management
    • SAP Enterprise Portal
    • Backend ERP adapters to SAP R/3 4.6C
    and greater
    SAP Auto-ID Infrastructure
    Auto-ID Infrastructure is compatible with
    SAP R/3 4.6C or greater, and it also has
    adapters for SAP Warehouse Management, SAP
    Business Information Warehouse, SAP Supply
    Chain Event Management, SAP Advanced Planning and Optimization, and all SAP NetWeaver components.
    Auto-ID Infrastructure is designed to synchronize
    EPC and RFID information into your ERP systems by providing a complete, multidimensional data model
    of RFID-enabled assets, including:
    1.EPC number
    2.Asset location
    3.Status
    4.Last RFID read point
    5.Handling unit number
    6.Packing hierarchy association
    (such as item, item-to-case, or case-to-pallet)
    It then maps this data to your SAP R/3 system
    via association to handling units (HUs). Handling
    unit headers include a standards-based HU number, weight, volume, and dimensions. HU content
    includes material number, quantity, unit of
    measure, batch number, plant number and location,
    and stock category (such as consignment), as well
    as serial number and inspection lot data.
    These HUs are then associated with EPC numbers
    and are integrated into the appropriate transaction
    for processes such as production orders, transfer orders, sales orders, delivery (ASNs) and receipt, shipment, picking and packing, and inventory move
    and packing operations.
    Because it is built on SAP Web
    Application Server,
    Auto-ID Infrastructure supports multiple
    communication interfaces (HTTP, SOAP, WSDL,
    SOCKET/ TCPIP), as well as mobile interfaces
    to PocketPC 2003 and Mobile Linux (Sharp).
    It runs on Windows (XP, 2000, NT), Unix, and
    Linux, and supports Oracle, SAP DB, DB2,
    and Microsoft SQL Server
    Now if you want to have some more technical
    information on RFID ,u can refer the below
    mentioned sites
    1.     www.aimglobal.org
    2.     www.rfidjournal.com
    3.     www.rfid-handbook.com
    4.     www.sciam.com
    5.     www.tagss.com
    6.     www.dynasis.com
    7.     www.copytag.com
    8.     www.ean-int.org.
    And if you want to know more about SAP-RFID
    you will get lot of information on SDN
    as also rightly mentioned by ARUL.
    1.http://service.sap.com/scm
    2.http://help.sap.com/autoid20/helpdata/en/2d/4ac13f2ad10228e10000000a114084/frameset.htm-this
    a help for SAP AII.
    Regards,
    Pawan P. Khilari
    Message was edited by: Pawan Khilari
    Message was edited by: Pawan Khilari

  • Install mini SAP 有錯誤with ColdKeyCheck

    請問一下  我安裝mini SAP 在vista 裡
    可是出現
    error: CALCRAM_NT_MSS ColdKeyCheck
    要怎麼解呢

    Hi Sravan,
    That's exactly what I did. I bought the book and I try install on Win XP pro with SQL 2005 dev edition pre-installed.
    I'm in possession of the Mini SAP, I own the book. I also looked at the site you suggested
    http://www.sap-img.com/mini-sap.htm.
    It seems to be I should be able to install on WIN XP pro due to the site above.
    This is how a work
    1) CD 1 starts with home page
    2) I choose REsume (because I have already pre-installed the SQL 2005)
    3) Setup starts
    4) asks me which directory, it proposes C:\MBS  -- I accept
    5) It asks me where is the DATA and the KERNEL CD --- it proposes D: ---I accept
    6) at the mean time I click on switch view and I see the logs and this is finally I get (I just copy/paste below the errors no the whole log)
    So I don't know how to proceed further. I contacted SAP and they propose me this forums.
    Could you please advice?
    thanks mesut
    Error: DBCOMMONDBENV_IND_MSS SubstituteVariables 2 416
           The function RegOpenKeyEx with the parameterlist    
           (Software\Microsoft\MSSQLServer\MSSQLServer\Parameters) returned with error code 2 and error text:
            The system cannot find the file specified.
    Error: DBCOMMONDBENV_IND_MSS InstallationDo 2 416
          Phase failed.
    Error: Main {} 2 416
           Installation aborted.

  • Problem installing SAP NetWeaver 04 - Full Java Edition SP15 - Step 22

    Hi SDN Members,
    I try to install the SAP NetWeaver 04 - Full Java Edition SP15 on my System (AMD Athlon X2 3800+ Dual Core with 1 GByte RAM). I've tried it several times but the Installation does not continue after Step 22 - Load Java Database Content. In the Logfile C:\Programme\sapinst_instdir\NW04SR1\WEBAS_COPY\ONE_HOST\jload.log I see this:
    31.12.05 14:25:34 com.sap.inst.jload.Jload dbImport
    INFO: trying to create table J2EE_CONFIG
    31.12.05 14:25:35 com.sap.inst.jload.Jload dbImport
    INFO: table J2EE_CONFIG created
    31.12.05 14:25:45 com.sap.inst.jload.Jload dbImport
    INFO: J2EE_CONFIG loaded (13144 rows)
    31.12.05 14:25:45 com.sap.inst.jload.Jload dbImport
    INFO: trying to create table J2EE_CONFIGENTRY
    31.12.05 14:25:45 com.sap.inst.jload.Jload dbImport
    INFO: table J2EE_CONFIGENTRY created
    This are the last entries. After this step java.exe uses still 50 % of CPU but nothing happens in kernel.exe. I let the installation run 22 hours but nothing changed.
    Is there anyone out there with the same problem and a solution?
    Regards
    Gregor
    Message was edited by: Gregor Wolf
    Correction: It is SP15

    Hi All,
    I got installed successfully on Windows2003 Server without any issues.
    But just was looking into the log file, i found these errors.Can anybody tell me why these are occured and these can be stop working with portals at any stage??
    Thanks a lot,
    Venkat
    INFO[E] 2006-01-03 01:44:43
    Unable to get value for environment variable JAVA_HOME.
    Error converting from service name=sapmsJ2E/protocol=tcp to port number. SAPRETURN=12
    INFO 2006-01-03 01:24:11
    Stopping SAP system services for J2E.
    ERROR 2006-01-03 01:24:11
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'OpenService' function, line (255), with parameter (SAPOsCol).
    ERROR 2006-01-03 01:24:41
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'OpenService' function, line (255), with parameter (SAPJ2E_01).
    ERROR 2006-01-03 01:24:41
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'OpenService' function, line (255), with parameter (SAPJ2E_01).
    ERROR 2006-01-03 01:24:41
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'OpenService' function, line (255), with parameter (SAPJ2E_00).
    ERROR 2006-01-03 01:24:41
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'OpenService' function, line (255), with parameter (SAPJ2E_00).
    INFO 2006-01-03 01:25:07
    Switched to user: j2eadm.
    ERROR 2006-01-03 01:25:07
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'OpenService' function, line (255), with parameter (SAPOsCol).
    Info: No action: Selected development component 'IAIKSecurityFS'/'sap.com'/'SAP AG'/'1.3.12' will not update currently deployed development component 'IAIKSecurityFS'/'sap.com'/'SAP AG'/'1.3.12'.
    Error: All selected SDAs and SCAs have already been deployed before.
    Error: -
    Prerequisites were aborted -
    Error: All selected SDAs and SCAs have already been deployed before.
    Info: Summarizing the deployment results:
    Info: Already deployed: C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_COPY\ONE_HOST\crypto.sda
    Processing error. Return code: 104
    Error: Processing error. Return code: 104

  • Help with Infomaker tool for editing Contract Manager Template

    I am new to Primavera Contract Manager (11i) and has been assigned with a task of editing one Submittals template on the system as the person who was handling it left the company.
    On doing some research I found out that it is done through the Infomaker tool and I was able to do so the test server.
    But on the live server, whenever I try to open the same template using Infomaker, it will ask to select the database, once we select the database which is Oracle 10 G express, it quits even without showing any error message.
    I tried creating a new user on Oracle to make sure it is not because of wrong user name and password, but what ever details we give, infomaker just quits when tried to connect to any database.
    Can you kindly help me to trace out the issue?

    Hi Suhas,
    The rule used in workflow template WS50100021 is a standard one. So try to find out that on what basis it is fetching the agents. It could be the case that the logic specified in the rule does not fulfill your requirement.
    The other reason could be that you have not specified the task as general. Please check if the agents tab is activated(green) in the task or not. If it is not you need to set the task as general.
    SOLUTION : if you want to get the workitem in your own SAP Inbox for testing purpose, you can set the WFINITIATOR as agent instead of that standard rule. This setting will send the workitem in your own SAP Inbox.
    Regards,
    Guddan

  • I have an iTunes account set up long ago on my home pc. My pc at home is antiquated and I can't interface with my account to edit acc. Info. Now I have other devices, iPhone 4 and iPad. I need to reset email apple Id and pw from iPad. How?

    I have an iTunes account set up long ago on my home pc. My pc at home is antiquated and I can't interface with my account to edit acc. Info. Now I have other devices, iPhone 4 and iPad. I need to reset email apple Id and pw from iPad. How? Should I just create new account? Don't want to lose 1500 songs.

    Hey Frankgates!
    I have an article here that can tell you how to do this:
    Apple ID: If you forget your password
    http://support.apple.com/kb/HT5787
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • I'm using Adobe Acrobat with the hope of editing a url on the graphic...a simple 3-letter change, save, close and send for printing..how do I get in edit mode to delete 3 letters and insert 3 new letters?

    ?I'm using Adobe Acrobat with the hope of editing a url on the graphic...a simple 3-letter change, save, close and send for printing..how do I get in edit mode to delete 3 letters and insert 3 new letters?

    pkg4ibm wrote:
    editing a url on the graphic...
    Not sure what you mean by that: is that URL in an image, or is it actual text?
    If it is in an image, then you need to extract the image, edit it with something like Photoshop, then add it back to the PDF.
    If the URL is actual text, I suggest that you remove the entire URL, then add the corrected link.

Maybe you are looking for