SAP WM Automatic transfer order print during confirmation

Dear all,
Could you please help me in order to configure the automatic printing of the transfer order during the transfer order confirmation (Tcode LT12).
Please let me know configuration way in transaction code OMLV.
Regards
Gianluca

Hi Jürgen L
during the TO confirmation the users have the chance to change the destination bin, information that will be printed in TO form. For this reason is useful to set the automatic print of the TO at the time of TO confirmation.
Regards
Gianluca

Similar Messages

  • Deactivate automatic transfer order during PO process

    hi
    After transfer order ,system automatically confirmation of transfer order .i need to manual confirmation, I dont want Automatic
    transfer order confirmation during PO process.
    i deactivate confirmation  in warehouse number,storage type, movement type. but again its happened the transfer order confrimation
    with regard
    dinesh

    Check again in OMLX both indicators are removed. If you are still facing the issue then you may need to check any enhancement done for this purpose to override the configuration.
    Or check you are using any special Movement indicator to directly putaway the material bypassing the TR & TO. Check WM view 1 for special mvt indicator
    Please refer the prerequesiste for the TO confirmation. If you remove the prerequisites it should work fine. But it is not advisable to remove the Confirmation required indicator at storage type level
    [http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f83e4d4afa11d182b90000e829fbfe/frameset.htm]
    [Auto Confirmation of transfer order - 999 mvt from storage type W01 to S01;
    Edited by: Karthik on Aug 12, 2011 1:07 PM

  • Automatic Transfer Order Creation

    Hi All,
    Scenario: When there is GR from Production order into WM Storage Location I have all settings so that Inbound Delivery HU Mvt is created also Material is getting packed into HU in Backend automatically as soon as Delivery is created.
    My Requirement is
    that I want to create Automatic transfer Order for this Inbound Delivery created. I have gone thru STD SAP Docuemnts which tells auto TO creatoin for TRs. But I need to create Auto TO for Inbound Delivery not for TR (of course in backend)
    So that in the next step the TO can Be confirmed manually.
    Can anyone plz help me << Moderator message - Everyone's problem is important >>.
    Thanks in Advance
    Edited by: Rob Burbank on Nov 10, 2010 3:57 PM

    Hi,
    To create automatic TO in the back grond w.r.t to inbound document is not possible in WM , i belive.
    if you dont want to use TR ,then do the following setting in customisation
    SPRO- LE-WM-interfaces-activate automatic to creation -movement type assign- keep TR column blank and in create TO immediatly column use x ( Call up transaction "Create TO for material document")
    Thanks & Regards
    Om

  • How to create automatic Transfer Order for posting change delivery mvt.321?

    Hi,
    We are using HU with WM functionality; While posting stocks after UD, the system creates a posting change delivery instead of directly posting the stock to unrestricted stock from quality stock.
    Now that we have to process the ourbound delivery bu creating a transfer order and confirming it and also do a Post Goods Issue against delivery then only the system posts the stock into unrestricted stock.
    Our client doesn't want to go thro' these process steps. They would like the stock to be posted to unrestricted automatically after UD stock posting (movement type 321). Is there a way out to automatically process the posting change delivery in the background including Transfer order creation and confirmation and PGI please?
    Thank you,
    Regards,
    Madhavkrishnaa.

    Pls see the customizing.
    SPRO:  Logistic Excution>Warehouse management>interfaces-->Define Quality management

  • Smartform in LT31 Transfer Order Printing

    Hi,
    I have designed a smartform in LT31 Transfer Order Printing for SU Contents .
    I have to inclued in it user exit MWMD0001.
    I have an requirement in abap and I need more details on what exactly to modify in the program.
    What modifications should I make in exit_rlvsdr40_001?
    I need to print fields from tables ltap, ltak, rl03t, and mean.
    Your help will be greatly appreciated with required code,if anyone implemented before.
    Regards
    Manohar S

    I worked on same requirement LT31 Transfer Order Pick list.  For Form configuration part Functional consultants will do in spro--->Warehouse management. 
    They assigned a paricular warehouse number to this form. Weather it is multiple / single TO.
    Design a smartform and goto se38, give it program name : RLVSDR40.
      In this program find user exit 'CALL CUSTOMER '001'.
    when ever u double click on this exit. This will take to function module exit. i.e. RLVSDR40 . Here include, we have to call the smartform function module.
    let me know , any clarrification required.
    Regards,
    Vishvesh. K

  • Transfer order Printing Error

    Hello,
    I have two issue with tranfer order
    1) We are printing transfer order through network order CN23 .The part has been issued to network order from 3 Group WBS element .So when we are printing the Transfer order it is just printing one WBS element on transfer order not the other two of them.So is there a configuration setting for the trnasfer order to print all the WBS element?
    2) When the user is printing tasfer order from his profile LT31 and including all the setting plus defined printer as LOCL the transfer order is not getting printed .Only when he is going to SP02 it is getting printing .So i guess there must be some setting that is missing in printer config .I checked in OMLV but couldnt find one .Can any one pls help.?

    Thanks for the reply Abhijit.I saw in OMLV in Print code that the printer has been set to 02 so does that mean it is going to Spool? If so how can i change the setting back to print immediately ?what needs to be done in printer setting to get that print immediately.
    My first question is related to Transfer order print out .We have network order which has 3 WBS elements from which the component has been issued.So when we print the transfer order via LT31 it is only printing one WBS not the other two of them.So my question is is there a way in config to change the Transfer order so that it print all the WBS element or it should be done via coding?

  • Automatic Transfer Order for GR from External vendor and from Process Order

    Hi Expert
    We need to implement the logic for automatic transfer order,
    the Idea when we Receive the Goods from Vendor and while posting goods via Migo we want that the system create automatically the TO.
    the same approach to be implemented for GR from Process Order we need that the system create TO directly to the right Bin
    Your support is higly recommanded
    Olfa

    Many thanks for your support
    I made what you illustrated in your previous message for the Mvt type 501:
    There is a pop up screen which displayed asking me to create TO for Material Document
    Please find attached the related screens
    And please note that the Material Master was updated accordingly
    Please note
    Please correct me if I made a wrong step
    Regards

  • Automatic Transfer Orders movement type 551

    Dear All
    I am working on warehouse management Transfer Orders for movement type 551,
    please suggest me what kind of  parameter need to select for movement type 551,553,555 in order to create the automatic transfer order in below customisation setting
    Implementation Guide for R/3 Customizing (IMG)->
    Logistics Execution->
    Warehouse Management->
    Activities->
    Transfers->
    Define Movement Types
    551,553,555
    Best luck to all
    Regards
    Nitin

    Dear all
    i got the answer
    i made the small modification in movement type , it is as below
    i flage the field "<b>Manual creation of transfer order not allowed</b>" &
    <b>"Automatic transfer order creation"</b> with value <b>X</b>
    thanks for watching my thread
    cheer's
    nitin

  • Transfer Order Print

    Hi
    Currently transfer Order Print output is sorting by Material Number. I want to take
    print sorting by Source Stroage type.
    How should i change this settings ?
    Thanx
    Key

    Hi Key rams,
    You must define sort profile for your warehouse number, with 1st sort criterion is VLTYP field(Source Storage Type) in OMLV. Then you must assign this sort profile into your print code that you use for print transfer order.
    I hope this solution can answer your problem.
    Please rewards point if helpfull.
    Regards
    Gunawan

  • Avoid automatic Transfer Order confirmation when created.

    Hi Gurus,
    When creating the Transfer Order, it automatically gets confirmed. How can we separate the TO creation and confirmation? Where are the switches? So we can either confirmed the TO in LT12 or by using interface.
    Any help is really appreciated.
    Many Thanks

    hi Jyoti,
    Thanks for the input. I checked in OMLX and it looks like our Warehouse is not listed for the Separate confirmation of pick and transfer to set up two step confirmation.
    But when I try to set this up, system pop up an error saying 'An entry already exists with the same key' whereas this entry is not maintained.
    Can you please elt me know what needs to be doen.
    Many Thanks

  • Customized Transfer Order print program

    Dear friends, I am facing a TO printing related problem. Please help me.
    In warehouse management, once the transfer order is saved, the system will print out the TO automatically. This can be done in configuration. However, the requirement wants also that we use customized print program and forms instead of standard SAP ones. My idea is like this. I create a SMARTFORM and a print program. The program calls the smartform inside the program. However, where can I configure this customized print program in the system?
    If anybody has done a similar task like this, please enlighten me.
    Your help will be mostly appreciated:D

    Hi
    Please go to t.code NACE. Select the appropriate Application for Transport Order & click on 'Output Types'. Select the Output Type if already exists (or enter the new output type if any) and click on the Processing Routines. Here you may provide the Print Program, FORM routine and the SmartForm name.
    Hope this helps.
    Thanks
    Prashanth

  • Automatic production order creation and confirmation

    Dear all,
    I am in a situation where i have to configure the SAP system in the following ways:
    1. From the planned orders automatically production order should be created today for the next day production and the end user will re-declare the quantity if there are any changes in the production order.
    2. If there are no re declarations to be done SAP should automatically release production order and save it.
    3. After the goods are produced the confirmation of the order should happen automatically from the measuring points.
    4. In the order confirmation, the storage location for goods issue should be automatically captured from the goods issue slip.
    5.After the confirmation of the order the goods receipt should happen automatically.
    Please suggest me whether these are possible in SAP or not.  If yes please tell me the procedure.

    HI,
    I hope this will give you the clear picture
    actually my scenario is:
    Finished good= x
    work centers involved = WC1, WC2.
    HERE BOTH THE WORK CENTERS ARE IDENTICAL, INPUTS ARE SAME AND OUTPUT IS THE FINISHED GOOD "X"  FOR BOTH THE WORK CENTERS.
    I HAVE A ROUTING FOR THE FINISHED GOOD "X" WITH TWO GROUP COUNTERS AS (1)WC1 AND (2) WC2
    When i create plan in md61 for 1 month and when i do mrp run in md02 it will create the planned orders and we can see the stock requirements in md04 and when we double click on the planned order we can convert them into production orders.
    But my users requirement is, he want to run the mrp in md01 and after that automatically each day the production order should be created.
    example with the above work centers and materials:-
    i have done the mrp run for "x" for November and December months
    i want to produce "x" of 200 kg on 30.11.2011.
    so SAP should generate production order for WC1 AS 100KG AND WC2 AS 100KG on 29.11.2011 at 5 pm automatically  and the user will release the order.
    similar example:-
    i have done the mrp run for "x" for November and December months
    i want to produce "x" of 400 kg on 03.12.2011.
    so SAP should generate production order FOR WC1 AS 200KG AND WC2 AS 200KG on 02.12.2011 at 5 pm automatically and the user will release the order.
    Please suggest me how to do the configure settings for my users requirement.
    Thanks,
    Aravind.C

  • Transfer Order Printing using smart forms

    Hi All
    Our requirement is to print Transfer Order  ( WM ) for Goods Receipt & Delivery using Smart forms.
    Can we change the existing standard format (SAP script ) and use our own form(smart form ) to include some other data & print.
    If possible how to replace the SAP script to Smart form.
    Request  someone could guide in detail.
    Thanks in advance.
    Samson

    Hi
    When you create Smartform try to replace it in customizing OMLV. Not sure if it will work as it refers to Sap Scirpt in help description.
    It is also possible to write Z program for TO printing and hardcode SmartForm there.
    Regards
    Mariusz

  • [SAP WM] Cancel Transfer Order after Technical complete of prodution order

    Hi gurus,
    i have this problem.
    In my SAP WM implementation, i have customizing the PP-WM interface to create automatically the TO from central warehouse to Production supply aera after releasing of production order. The steps are:
    - Release production order
    - Creation of TR  - automatically
    - Ceration of TO to be confirmed (red light) from central warehouse (001) to production supply area (100) - automatically
    Now i would that after technical complete of production order, automatically the TO to be confirmed is cancelled. There is a way to do it?
    thanks and regards.

    Allesio
    I am confused as to why you would want to CANCEL the TO. Surely if the order is complete (technically or otherwise) then the stock has been moved from its source to the order and therefore you would want to CONFIRM it and not CANCEL it.
    As I said if the TO is to take 100 of material A from bin 1111111111 to prod order 9999999999 and you cancel the TO the stock will stay in 1111111111 when in fact it has gone to 9999999999 .
    If your order is to say create 100 pieces of Z and to do this you need 100 pieces of A then you want to CONSUME 100 pieces of A  and GR 100 pieces of Z.
    If you cancel the TO the consumption will fail as the stock is not in 9999999999 but has gone back to 1111111111.
    The other problem is that you will be showing 100 pieces of A in bin 1111111111 which is NOT THERE as the order has used it.
    I hope that this helps
    Frenchy.

  • Transfer order print issue

    Transfer order label of building A are printed automatically in building B instead of building A. how to check why it is happening, data avaialble is Process order number and transfer order number." what are the steps to select the right printer?

    for answer: Printing process order issue
    tcode : OMLV

Maybe you are looking for