SAP WM - PM reservation / GoodsIssue / Transfer order

Dear all,
I have a question regaring reservations and WM.
When a reservation is created via PM (IW31) then the standard process is you do a GI via migo and then the transfer order is created etc.
My client want that the GI is done after the Transfer order (after the WM part) and after the transfer order confirmation. Like with inbound and outbound deliveriers.
I have understood that with regards to reservation the standard process is:
Reservation - GI - TO - TO confirmation
My client wants:
Reservation - TO - TO confirmation - GI
I hope someboyd can give me the solution or point me in the right way.
Thanks in advance,
WK

Hi,
The purpose of transfer order is to confirm after the Good Receipts.
The Goods has moved from One area to the FINAL BIN in the warehouse for that only the TO confirmation is done
Client requirement is not possible
Please tell that after Good Receipts only we are confirming the TO ..
After confirmation of TO we make sure that the qty has transferred to the correction location
Say for eg ( TATA MOTORS)
100 nos of Bearings is moved from One AREA to other Area (STORES) during confirmation they found
1 nos is missing they will confirm 99 nos only and the 1 nos will be scrapped
Regards
Ganesh

Similar Messages

SAP mail not received for transfer order errors in background

Hi All,
We need to set up automated mails to SAP inbox in case there is any error during automatic TO creation in the background. The customizing for this has been done. Now in OMKX for MAIL messages we have two options, either tick the document user or put a user id in the recepient field. If I put a user id in the recepient field the user gets the job spool in the inbox everytime the job is run. However when the 'document user' box is checked it does not send the notification to the inbox of the user who had created the material document when there is some error in the TO creation background job. The mail control indicator 'A' has been set up in OMKX under both MAIL messages and movement types. Am I missing some setting? Note that auto TO creation is successfully happening in background so all its relevant settings are in place.

I have just scanned down 9 pages in the discussion and found a discussion thread already running for my problem with google mail....... http://discussions.apple.com/thread.jspa?threadID=874063&tstart=120

Transfer Orders visible in LRF1 -Why , can they be removed from there

HI SAP Experts ,
A Couple of Transfer Orders are Vsible in LRF1, some of them are in Open State .
Some of them are in Comfirmed State
Can we remove them in such a way that they won't be visible in any Queue
couple of users have generated them
Visible in everybody's id in LRF1
Awarded Suitable Points
Regards
Adarsh

Hi ,
How can we Change the Layout so that the TO is NOt visible in any Queue
Incidentally all the TO's which are visible are Unconfrimed , I could have suggested User to confrim by LT12 but issue is among all 10 items in TO , 9 items are deleted by LT15 , One item Remains to be Processed hence it is visible in the Queue
Also , overall Indicator is NOt selected in TO Item level
Awarded Suitable POints for Answer
Regards
Adarsh

Transfer Order Change Document

Does SAP maintaine change document for Transfer Order?
In other words can I want to see the changes done on a particular transafer order with the date and user-id assiciated with the change.

You can see that in table LTAK.

Creation of transfer orders using reservation

Hi,
We have requirement to create a transfer order against goods movement reservation. In standard SAP, the transfer orders get generated only after posting goods issue for reservation. However, we need to create transfer orders first so that we can print the pick list first and the post the goods issue against those reservations.
I know this is possible for outbound delivery. However, I have tried all ways to do this for reservation and could not find solution.
Please help.
Thanks,
-Shekhar

i have a similar requirement. I have not come across any solution to it in Standard. Then i opted for ABAP. Found a BAPI for the creation of TR and TO. the better option is the creation of TR rather then creation of transfer order. the user will be confirming the source storage bin where as the destination storage bins will be assigned based on the movement type.
Once we have the movement type in reservation, we will create a transfer requirement with the respective requirement type. Destination storage bin will be defined by the movement type (or based on any configuration that you may have done).
this will be used to create a transfer order where the user will be able to opt for the source storage bin.
Hope this will be of any advantage to you.

Sap Script Transfer Order Change

Hello Gurus,
I have a sapscript for Pick For delivery (Transfer Order pick List) once the transfer order created from the delivery is confirmed.
In the current form, material number is being printed on the form from the transfer order table LTAP.
Now the change need to be made is to print the delivery item number (before the material number like delivery_item_number space material_number) of the corresponding material number. I need to write a logic in order to extract the delivery item position number. do you have any idea how I can do that.
Please help me out.
the sapscript is closest to sap form LVSTALISTE.
Regards,
B
Edited by: Balu on Aug 13, 2008 6:26 PM

Subroutine program
FORM CALC_NETPRICE TABLES in_tab STRUCTURE itcsy
out_tab STRUCTURE itcsy.
Data : w_matnr type LTAP-MATNR,
          w_posnr type LIPS-POSNR.
READ TABLE in_tab INDEX 1.
w_matnr = in_tab-value.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      INPUT         = w_matnr
    IMPORTING
      OUTPUT        = w_matnr.
SELECT SINGLE POSNR FROM LIPS INTO W_POSNR WHERE MATNR EQ W_MATNR.
READ TABLE out_tab INDEX 1.
MOVE W_POSNR TO out_tab-value.
MODIFY out_tab INDEX sy-tabix.
ENDFORM.                    "CALC_NETPRICE
Now add the Field &LIPS-POSNR& where u required.
Just make sure that the PERFORM statement is before the fields output. i.e, &LIPS-POSNR& ,, &LTAP-MATNR&
Regards
Krishna

Transferring data(Transfer Order ) From SAP system to Legacy System

Hi Friends
please , help me out
I Need to Transfer The Transfer Order (LT03) Data To legacy System
How to create the Idoc on LT03
Is there a solution for this please..
Regards..
null

Hi Viswa ,
You need to setup the configure the communication between SAP and legacy.
EDI will suffice your requirement.
Regards,
Madhu.

BAPI or FM for creating transfer order with reference to reservation

hi
i need a BAPI or FM to create a transfer order with reference to a reservation. I tried BAPI_GOODSMVT_CREATE but the problem is it does not support movement type '311'. is there any FM or BAPI to use movement type '311' and create a transfer order with reference to a reservation? pls help

Hi,
Try Using WM_CREATE_GOODS_MOVEMENT first use this and later use any of the TO create FM.
Thanks & Regards,
YJR

User or SAP exit for Batch Status during Transfer Order creation

Hi All,
I would like to know if there's an user-exit or a SAP-exit available with which we could evaluate the status of a batch during the creation of a Transfer Order.
When a production order is created, the system creates automatically a transfer requirement with all the components needed for the production. This TR (Transfer requirement) is then converted into a TO (transfer order) with transaction LT04. Here, we want to control that the status of the batches is not restricted. Otherwise, the user shall not be able to save the TO.
Thanks in advance, I appreciate your feedback!
SS

Exit Name Description
MWM2S001 Exit to Determine 2-Step Picking Characteristic
MWMBAP01 Enhancement for BAPI WarehouseTransOrder.GetDetail
MWMBAP02 Enhancement for BAPI WarehouseStock.GetDetail
MWMD0001 Transfer order print via RLVSDR40
MWMD0002 Transfer order print as multiple process with RLKOMM40
MWMIDI07 Enhancement for Output WMPIHU (Create Pick-HU) Inbound
MWMIDO11 Enhancement for message WMTORD: TO with several items
MWMIDO12 Enhancement for Output WMPIHU (Pick-HUs) Outbound
MWMIDO13 Extension for WMMBXY (subsequent tasks after goods movement)
MWMPP001 Enhancement WM/PP Interface (automatic TR generation)
MWMRF001 RF: Influence Display of material description
MWMRF100 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0100)
MWMRF101 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0101)
MWMRF102 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0102)
MWMRF104 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0104)
MWMRF105 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0105)
MWMRF106 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0106)
MWMRF107 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0107)
MWMRF108 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0108)
MWMRF151 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0151)
MWMRF152 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0152)
MWMRF153 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0153)
MWMRF170 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0170)
MWMRF202 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0202)
MWMRF203 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0203)
MWMRF204 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0204)
MWMRF205 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0205)
MWMRF212 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0212)
MWMRF213 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0213)
MWMRF221 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0221)
MWMRF302 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0302)
MWMRF303 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0303)
MWMRF304 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0304)
MWMRF305 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0305)
MWMRF312 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0312)
MWMRF313 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0313)
MWMRF321 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0321)
MWMRF400 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0400)
MWMRF402 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0402)
MWMRF403 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0403)
MWMRF404 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0404)
MWMRF405 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0405)
MWMRF406 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0406)
MWMRF410 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0410)
MWMRF411 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0411
MWMRF412 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0412)
MWMRF502 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0502)
MWMRF503 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0503)
MWMRF504 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0504)
MWMRF505 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0505)
MWMRF600 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0600)
MWMRF601 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0601)
MWMRF630 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0630)
MWMRF631 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0631)
MWMRF632 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0632)
MWMRF633 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0633)
MWMRF634 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0634)
MWMRF650 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0650)
MWMRF651 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0651)
MWMRF700 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0700)
MWMRF701 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0701)
MWMRF702 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0700)
MWMRF703 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0703)
MWMRF704 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0704)
MWMRF705 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0705)
MWMRF760 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0760)
MWMRF761 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0761)
MWMRF762 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0762)
MWMRF763 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0763)
MWMRF764 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0764)
MWMRF765 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0765)
MWMRF766 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0766)
MWMRF767 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0767)
MWMRF768 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0768)
MWMRF769 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0769)
MWMRF777 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0777)
MWMRF800 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0800)
MWMRF801 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0801)
MWMRF802 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0802)
MWMRF803 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0803)
MWMRF804 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0804)
MWMRF805 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0805)
MWMRF806 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0806)
MWMRF807 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0807)
MWMRF888 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0888)
MWMRF889 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0202)
MWMRF998 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0998)
MWMRF999 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0999)
MWMRFCOD Enhancement for function codedisabling
MWMRFDLV select delivery by user criteria
MWMRFPRT Enhancement for printing
MWMRFSSG user exit for sorting TOs in RF system-guided transaction
MWMRFUP Customer defined general purpose pushbutton called from scr.
MWMRP001 Cust. Exit for Fixed Bin Replenish.: Delivery Item Selection
MWMRP002 Cust. Exit for Fixed Bin Replenishment: TR Quantity Distr.
MWMRP003 Customer Exit for Replenishment using RLLNACH1
MWMRP004 User Exit for Replenishment using RLLNACH4
MWMTO001 Enhancements for end of transfer order generation
MWMTO010 Exit: Calculation of Total Planned TO Processing Time
MWMTO011 Correction of Planned Processing Time for TO Item
Hi,
MWMTO012 Correction of Sorting and Split Transfer Order
MWMTO013 Stock Removal for Sev. Storage Types as in Stringent FIFO
MWMTOAU3 Separate selection of posting changes for autom.TO creation
MWMTR001 Exits at the end of transfer rqmnt creation (IM,PP interf.)
No of Exits: 104
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Regards,
Raj.

LT03 - create transfer order (SAP retail)

Hi,
when I process a transfer order with LT03, system replies with the message:
Article X doesn't exist or is not activated
How can I solve this problem

Hi,
when I try ro create WM1 and WM2 views for that material/article with MM01 trx, the system doesn't show
any entry related to Warehouse number and there's not any customizing entry about Warehouse management.
Do you agree that It must be customized the Warehouse management and then create in material master
WM1 and WM2 views ?
Yours truly

SAP WM Automatic transfer order print during confirmation

Dear all,
Could you please help me in order to configure the automatic printing of the transfer order during the transfer order confirmation (Tcode LT12).
Please let me know configuration way in transaction code OMLV.
Regards
Gianluca

Hi Jürgen L
during the TO confirmation the users have the chance to change the destination bin, information that will be printed in TO form. For this reason is useful to set the automatic print of the TO at the time of TO confirmation.
Regards
Gianluca

Transfer Order number for Production order

Hi,
what is the best way to get the transfer order number (LTAK-TANUM) for picking for a production order?
Picking can occur first in IM (via MB1A for example) or in WM (via LP10). Requirement Tracking Number cannot be used as it has only a length of 10 characters (production order number up to 12 characters).
Reservation number (LTAK-RSNUM) is only filled in case picking is done from IM first.
Cheers
Mathias

Hi,
how are other companies handling this if they want to pick from the warehouse (e.g. using CO27) for a production order and the production order number has 12 characters? The bin (LTAP-VLPLA) and the requirement number (LTAK-BENUM) only have up to 10 characters.
Is there a standard way in SAP to print out the complete 12 character number on the picking list? I could not find another field where the production order number appears.
P.S. There are already some production order types in use that have a number range with 12 characters.
Cheers
Mathias

Issue during creation of Transfer Order

I am trying to create a Transfer Order from a TR but I am getting the follwoin error.
"No destination storage bin to be found in storage type XXX "
I have assigned a storage type to a storage bin and the Putaway strategy exist in material master which is assigned to Storage type XXX.
Please tell me if I am missing any pat of master data or configuration.
Thanks
SAP Fans....

Possible cuase:
System is not able to search for any storage bin according to the putaway strategy u have maintained for the storage type.
Run LX03 report and find out list of storage bin in the storage type.
Choose an empty bin and put it manually in the TO.

Routing in Stock Transfer Order

Hi,
We are having SAP 4.7 & we have activated Transportation Routing process.
Routing is copied in Sales order & Delivery. But the same is not copied in the stock transfer Order. We are doing following steps.
We are using Stock Transfer order to transfer the material from One storage location to another storage location. Supplying Plant & Receiving Plant are same in Stock transfer Order. We are entering Receiving STorage location & Shipping point in the STO.
Is this b'coz of Supplying plant & receing plant are same in the STO ? Or i need to active something els for this.
Kindly revert back.
Thanks in advance.
Samir Bhatt

Hi,
this is one of the problems caused by an organisation structure that is not quite matching the "real world".
In SAP each Plant should have a unique address and the storage locations are thought of as areas within that address.
If you have two sites that have different addresses, they should <u>ideally</u> be separate plants. You can then use all of the available functionality within SAP that you would expect.
If you want to set up a route that goes from one address to another than this is possible, but in your case you are actually saying that you want a route for s delivery from and too the same address, not really a real world scenario.
So if you really want to do this then each site should be a plant. I expect that it is too late to change your design but it is important for others reading this to understand the problems that are caused when Storage locations are used instead of Plants for physically separate addresses.
Sorry if this is not much help to you but it should help you to understand why you are having a problem.
Steve B

Transfer Order: discrepancies between GI and GR management

Hi everybody!
I'll appriciate your suggest to manage this critical scenarios:
Transfer Order from Pant A to Plant B (both the plants belong to the same company)
Case 1:
for an item GI qty is major than GE qty
For an item GI qty is less then GE qty
Case 2:
for an item the material code entered into STO and into Delivery and so registered at GI moment, is different from that effectively delivered and received at receiving plant.
Which are the necessary material documents that have to be created and so the necessary stock adjustements that have to be executed in order to solve every one discrepancies above described?
Many thanks
Roberta

Many thanks for the answers;
I'll try to explain better than before the scenarios
Case 1:
for an item GI qty is major than GE qty
--> do an addition Goods receipt for the remaining in-transit quantity.
alternative cancel the goods receipt, cancel the goods issue, redo the case with correct quantities
The case is that in the Delivery created against the STO the GI qty registered is major than that effectively receipt from the receipt plant; If I cancel the movements I've not traces if the discrepancies happened
For an item GI qty is less then GE qty
--> how can this be possible? anyhow, cancel the goods receipt and post it with the correct quantity.
alternative : cancel the goods receipt, cancel the goods issue, redo the case with correct quantities
The case is that in the Delivery created against the STO the GI qty registered is less than that effectively receipt from the receipt plant ( the whareauser has made a mistake during the picking activity); If I cancel the movements I've not traces if the discrepancies happened
Case 2:
for an item the material code entered into STO and into Delivery and so registered at GI moment, is different from that effectively delivered and received at receiving plant.
cancel the goods receipt, cancel the goods issue, redo in SAP with material that you shipped physically.
If I cancel the movements I've not traces if the discrepancies happened

SAP WM - PM reservation / GoodsIssue / Transfer order

Similar Messages

Maybe you are looking for