SAP WM-PP: Spit transfer requirements

Hello,
We are working in a WM-PP scenario with transfer requirements and transfer orders.
For one process we need to use the "2 step picking" functionality of the SAP system.
In the release of the production order, the system is creating the transfer requirements. SAP is creating one transfer requirement per operation, with many items, one item for each component in the operation.
This is the problem, instead of one "big" transfer requirement with many items, we need to have many transfer requirements. This is because for the "2 step picking" process we need to have more than one "transfer requirement group" for the components of one production order operation.
The problem is that the "transfer requirement groups" can group "transfer requirements", no "transfer requirement items". If one transfer requirement is in the group, all its item with 2 step picking belong to the group.
Summing up, we need a way of splitting transfer requirement according to our criteria, in order to create several "transfer requirement groups" for the components of one production order operation.
As far as I know, we can only split transfer requirements in one operation according to the destination bin of the component.
Is there any other way of splitting transfer requirements?
Thank you very much for your help.

Hi all,
Thanks for the replies.
@ Jurgen: I have setup mail notifications, but I don't see any messages. It looks like SAP simply does not try to create a transfer order in the first place.
@ Bala: yes this has been checked. Actually I'm part of the project team so any changes would have been done by myself most probably. Anyway, no changes made to this part of the system.
Any suggestions?
Regards,
Oliver

Similar Messages

Procedure for Clearing Open Transfer Requirements & Posting Changes

Dear All,
With my present SAP System, both IM & WM Stocks are zero for a given Sales Order / Line item. But there are pending Transfer requirements & Posting changes due to the fact that the users have not completed up until the TO Confirmation Stage. Now that the stocks are in harmony in both IM & WM, what do we do to the open transfer requirements and posting changes. What is the best practice procedure for the above scenario.
Appreciate an advice for the above scenario
Thanks
Shabeen Buhary

Hello,
Write a program which will call transaction LB02 for TR & LU02 for Posting change notice (PCN).This program will make status of these TR & PCN complete.
I already used the same.
Regards
Prashant

GR miss transfer requirment, how to picking it to bin. Manul TO failed.

Due to wrong customizing , GR for return purchase order did not create Transfer requirment automatically. MVT is 161.
the goods is recored in interim storage area 916 and WM mvt is 601.
currently , because of no TR, i cannot create transfer order to putaway from acture bin.
i try to create TO for GR material document with T-code LS06, but it is failed , i encounter below error.
"You have not selected any data for the material document 520105801
Message no. L2030"
Expert ,please help me to soft this issue.
thanks for your help.

In LT01,whether MVT 999 is ok?
In standard system, mvt 999 is used.
In LT10, symbol "Lock" in material, i cannot select item. how can i unlock it?
I don't know what you are doing. If a quant is locked you cannot move it.
I hope you are not trying to move the -quant which is in storage type 916. You should find the corresponding +quant in a "normal" storage type and move it to the -quant, to 916.
You can find information e.g. on SAP online help, answered threads about LT01/LT10 and about how to eliminate -quants in interim storage types.
Edited by: Csaba Szommer on Aug 30, 2011 8:53 AM

List of Open Transfer Requirement(TR) - Reg

Hi all
I want to know about report : List of Open Transfer Requirement(TR). Where i have to get the details. ie. Which table i have to get it? Can any one explain that reports briefly? Any Standrad T.code is there ?

activate the warehous activity monitor t-code LL01. see help.sap.com for details on the how-to.

Transfer Requirement with "processing complete" ( E ) status

Hi all.
I've customized my system to create a transfer requeriment in a "Cancelation of Production order confirmation " Trx: CO13, MM mov. 102, WM mov. 104.
I've customized trx. OMLR to create Transfer requirement for WM mov. 104 to create next the TO manually.
The transfer requierement is created but with status E ( processing complete ) and without TO.
How I can to customize the system to create a transfer requierement with status T ( Partially delivered ) ????
thanks

Hi Navarro,
I don't think you could customize the system to create TR with 'fully deliverd' since there's no point in creating waste in the system...(maybe I'm mistaken...)
My other remark is that you don't need to customize the system since this setting is there as default, except the immediate TO creation - if I understood you well, but your explanation is not clear (to me).
0. Please describe what you did with proper terms, clearly.
1. Are you sure the TO was not created? Did you check the TO reference in the TR (LB03) or in LT22?
2. Hopfully you just did customizing w/o ABAP, please confirm.
3. If you just did customizing, and your TR was created really as fully delivered, you should search for OSS notes (I've just found 155904 but it is not relevant I think), if you fails to find you should contact SAP AG.
But first please check you settings and what happend, and of course please give more details...
Regards,
Csaba

Transfer Requirement for Movement Type 262 (Cancel With Ref to Reservation)

Hi Experts,
it is possible to configure the system to create a Transfer requirement for movement type 262 (Cancel With Reference to reservation) ?
When i execute a movement type 262 (Cancel with reference to Order), the system creates a Transfer Requirement, i can process it in transaction LB12. Now i am using the movement type 262 to Reservation, but the system does not create a transfer Requirement.
I am using SAP ECC 6.0.
Thanks in advance,
Alejandro López.

Hi Alejandro,
Can you clarify what process you are performing by this comment? .. "_Now i am using the movement type 262 to Reservation"_.
As per standard process TR (transfer requirement) creation takes place as per the setting in IM-WM interface. Please check in Tcode OMLR, if TR create field is having "X" for the warehouse and reference movement type record. Normally whenever any material document gets posted in IM, MM-WM interface provide the decisions about which WM movement type to pick for warehouse and data about TR , PCN and TO creation.
Hope this will help.
Regards,
Sudhir

Transfer Requirement for Movement Type 262 to Reservation

Hi Experts,
it is possible to configure the system to create a Transfer requirement for movement type 262 to reservation?
When i execute a movement type 262 to Order, the system creates a Transfer Requirement, i can process it in transaction LB12. Now i am using the movement type 262 to Reservation, but the system does not create a transfer Requirement.
I am using SAP ECC 6.0.
Thanks in advance,
Alejandro López.
Edited by: Alejandro López on Feb 28, 2011 1:55 PM

Hi Alejandro,
Can you clarify what process you are performing by this comment? .. "_Now i am using the movement type 262 to Reservation"_.
As per standard process TR (transfer requirement) creation takes place as per the setting in IM-WM interface. Please check in Tcode OMLR, if TR create field is having "X" for the warehouse and reference movement type record. Normally whenever any material document gets posted in IM, MM-WM interface provide the decisions about which WM movement type to pick for warehouse and data about TR , PCN and TO creation.
Hope this will help.
Regards,
Sudhir

Combining Transfer requirements into a Single transfer order

Hello all,
Is there any SAP functionality that allows to combine Transfer requirements of various materials into a sinlge Transfer order with various transfer requirements as line items in the transfer order. Pl. reply at the earliest,as this information is much needed.
Thanks,
Maxx

I solved this requirement using wave pick. The steps are explained below:
Wave Pick:
1.     LP21 Replenishment planning for fixed bins Enter the requirement type as P Production supply and also enter the requirement number
2.     This helps to combine the Transfer requirements with the same requirement type and requirement number into a single Transfer order. This can be achieved by enabling the wave pick strategy.
3.     Wave pick is useful for generating group of deliveries by having time as the basic criteria. Hence while executing LP21- replenishment for fixed bins enter the planned date and time under the section additional info for transfer requirement
4.     Finally, by creating a wave pick with the timeslots, we would be able to group the transfer requirements in to a single transfer order
5.     We can monitor the wave picks and their status using wave pick monitor.
Reward points if helpful.
Regards,
Maxx

In how many ways we can load hierarchies to SAP BW and which transfer mthd

Hi guru's,
In how many ways we can load hierarchies to SAP BW and which transfer method is best.
can anyone explain me with suitable example.
Thanks,
Madhu Raj.

There are standard datasources available for hierarchies also. If the standard datasource does not satisfy your requirement you can always load a hierarchy using flat file. Refer to the below link for the same
http://help.sap.com/saphelp_nw04/helpdata/en/fa/e92637c2cbf357e10000009b38f936/frameset.htm

2 Step pick procedure for Transfer Requirement

Hi Gurus,
Can I have 2 step picking process for TR's. For our internal WH movement I wanted to have 2 step picking to optimize physical movement of material. I cant have a delivery for doing this, therefore trying to with Transfer requirement. Is this possible.
thanks
G

You can use two-step picking to pick goods fo:
- deliveries
- production / process orders
in standrad system.
That's all.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f842674afa11d182b90000e829fbfe/frameset.htm
Regards,
Csaba

Transfer Requirement for Goods Receipt Item

Hi All,
We are trying to create Transfer Order for Goods Receipt items using an ITS mobile application.We are using the function module L_TO_CREATE_TR to create Transfer Order by passing the Transfer Requirement from the Goods Receipt as an input to the function module. Our requirement is to create one Transfer Orde per Goods Receipt item. We need to create Transfer Order for the items simulatneously from different terminals.Since we have only one Transfer Requirement for the entire Goods Receipt document, we are not able to create Transfer Orders simultaneously because of the system lock (Transfer Requirement is locked).
Is it possible to create separate Transfer Rquirement for the individual items in the Goods Receipt via customizing/User exit.
Your guidance in this regard will be great help for us.
Regards,
Shaju

Hi Dirk,
Thank you for your reply.
Our enduser will be using handheld device for Transfer Order creation. The user will pick the GR item material from one storage type (902) and the Transfer Requirement will be locked at this moment.Later while placing the SU in destination bin the user will scan the destination bin and the Transfer Order will be created at the time of scanning. Till the completion of the entire process the Transfer Requirement will be locked and no one else can pick the materials of the same GR from 902 storage type.
We are trying to create Transfer Requirements for each Goods Receipt Item and we are not able to find any user exit in Goods Receipt Creation or any customizing option.
Can you please check and help us to resolve the same.
Regards,
Shaju
Edited by: shaju tv on Apr 5, 2010 11:40 AM

User Exit / BADI for Transfer Requirement Create

Hi All,
I have looked into the system and i could not find any User Exit or BADI for creation of Transfer requirement. This is for manual creation through LB01 and not interface with PP or IM. I am aware of the Userexits available for those, but i could not find any for WM TR Manual creation.
Let me know if you are aware of any.
Thanks
Jithin

When you create a transfer requirement, i want to make it mandatory to enter the destination bin, for example. The Transfer Requirement should not be saved if it is not entered.
I know we can do this by creating multiple movement types for each destination, but i want to know if there is a way where the user can enter the destination when creating a TR with a single movement type.
Jithin

Creation of transfer requirement when posting material document

Hi
I've copied standard movement 311 into 911 but i need another behaviour on this new mov. I use this mov in trx MB21 in order to create a reservation. When I post it in MIGO, I need to create a transfer requirement instead a Posting Change Notice. I think I could modify this on SPRO: Logistics Execution -> Warehouse Management -> Intefaces -> Stocks management -> Movement Classes
but i don't know exactly what to do.
Can anyone help me?
Thanks and regards

Hi,
You can create TR for your mov.type 911 in the below mentioned settings.
SPRO - LE - WM - Interfaces - Inven. Mgmt - Define Mov.types - LE-WM Interface to Inventory Management
Set the indicator as X in the TR column & remove the tick in the posting change option.
Hope its clear,
Regards,

MATERIAL LINK TO ONE SAP SYSTEM TO ANOTHER SAP SYSTEM FOR IDOC TRANSFER

Hi Experts,
How the MATERIAL LINK TO ONE SAP SYSTEM TO ANOTHER SAP SYSTEM FOR IDOC TRANSFER?
Scenario : when 2nd system create the invoice,it will create a po in the 1st system.
51 error msg we are getting material does not exists.but the material is available in the receiving plant.
Please suggest

If you say the material master is available in the 1st system (where you create the order), then the material number in the IDOC may not match with the material number in your database.
leading zeros. material number stored as alphanumeris instead of numeric.

Transfer Requirement with Inbound delivery.

Hi Guys,
I have the following problem:
The Warehouse is HU managed.
When I have a Purchase Order and I do a Goods Receipt the system is creating a Material Document and in addition a Transfer Requirement.
But
When I have a Purchase Order and I have an Inbound Delivery, before I can do my Post Goods Receipt I have to do my TO creation and confirmation.
In IMG under Handling Unit Management > Basics > Delivery > Define Sequence of Transfer Order - Goods Receipt I can make my settings so that I can do my Post Goods Receipt before my TO creation and confirmation.
This means that I have again first a Material Document. Only in this scenario I do not get a TR, although in the WM - IM interface for movement 101 TR creation is set to X.
How can I get my TRs?
Thanks in advance for your help.

Answers to your questions:
Yes Yes No.
The MIGO transaction is there to do the GR at the moment the truck is at your door, the inbound delivery transaction (VLxxx) is there to have an ASN creating the inbound delivery days before the truck will arrive. To avoid open TRs sitting there for days, the system normally doesn't create the TRs. The posting of the GR (and the availability for MRP etc) can only be done after the TOs are created and confirmed. If you look at an inbound delivery under the subsequent functions it says "create TO".
So you create TO from the inbound delivery and after that you post the GR.
Only, there is a way to turn around the sequence (when using HUs) but then the Mat Doc is created and not a TR.
We need the TR to be send by IDOC to another system.

SAP WM-PP: Spit transfer requirements

Similar Messages

Maybe you are looking for