SAP WM Preallocated Stock Not bypassing GR and Putaway in GI Area

Hi,
I have maintained the following to bypass the put away into GI Area in ECC 6.0
1. Preallocated Stock maintained for the material in the Preallocated stock Table V_T310 using LT51.
2. Movement type 101 is set to consider the preallocated stock.
I created the Put away TO and the preallocated button is enabled and the I could calculate the selected quantity. However the put away is going to the final destination bin. It is not bypassing the normal put away bin and goes to the GI area even though I have an open reservation for the same material.
The GR and GI are working as per our put away and picking strategy.
The actual quantity is updated for each GR. As soon as the Target quantity and the Actual quantity are same, then the preallocated stock table record for the material is deleted.
But our requirement is to bypass the normal put away destination bin and move GR quantity to GI Qty.
Am I missing any settings? Has anyone used this functionality?
Your input will be highly appreciated.
Regards,
SP0526

Subbu,
Please neglect my previous post, no need for setting the indicator for GI WM-movement type.
I have maintained the following to bypass the put away into GI Area in ECC 6.0
1. Preallocated Stock maintained for the material in the Preallocated stock Table V_T310 using LT51.
2. Movement type 101 is set to consider the preallocated stock.
I created the Put away TO and the preallocated button is enabled and the I could calculate the selected quantity. However the put away is going to the final destination bin. It is not bypassing the normal put away bin and goes to the GI area even though I have an open reservation for the same material.
The GR and GI are working as per our put away and picking strategy.
The actual quantity is updated for each GR. As soon as the Target quantity and the Actual quantity are same, then the preallocated stock table record for the material is deleted.
But our requirement is to bypass the normal put away destination bin and move GR quantity to GI Qty.
Your problem is not clear.
- First you say that the quantity goes from GR interim storage type directly to GI interim storage type (e.g. from 902 to 911)
- After that you say that you don't want to putaway the goods into the nromal storage bin but directly to the GI interim storage type
So, first you say your requirement is fulfilled then you say you want to fulfill your requirement.
Please clarify this. (maybe I just can't understand what you want)
As per your description your system is working properly.
Regards,
Csaba

Similar Messages

After EHP6 upgrade in SAP ECC6.0 Stocke not get updated in MMBE after Partial UD

Hello Experts,
Recently we have upgraded our system to EHP6 on ECC 6.0 facing issue in MMBE. We have given Partial UD. after partial UD, some stock suppose to move in Blocked stock as per UD code customization. surprisingly stock not moved to Blocked stock. same is updating through Mb1b transaction.
Thanks in Advance !

Hi,
Check what have you maintained in QM inventory posting in Configuration.
Follow the path: QCC0> Quality Inspection> Inspection lot completion> Define inventory posting.
Movement type 350 should be maintained against VMENGE04 in Q Stock.
ntn

SAP SCM F&R , not all the steps of dispatcher profile are executed.

Hi,
We are currently using SCM F&R 5.0 and facing issues when we try to process the location.
Of the 13 steps of dispatcher profile, (details given below), first four show the status as OK and fifth one "errors" out. Rest of them have status as "Initial".
To process the location, we are using the report - /FRE/UI_FRP_PROCESS_LOCATION.
Do let me know if anyone has come across this issue, any input would be appreciated.
Also do advice, where we can see the detail log. As in location status, it only display the status ,ie, "Error", Initial" , "OK".
Details of the steps are as mentioned below:
Sequence 1 -- collect information data for the F&R Processor (MN_AND_TECH_SYNC)
        task 1 -- create location data (CREATE_LOCATION_ENVIRONMENT)
        task 2 -- provide data for F&R processor on demand (CREATE_OUTBOUND_FILES_ON_DEM)
        task 3 -- provide master data for F&R processor (CRETAE_OUTB_FILES_NO_CRIT_MD)
        task 4 -- provide configuration data for F&R processor (CHECK_FOR_UPDATES)
        task 5 -- check configuration data (SAFRUN_NOCRIT)
Sequence 2 -- read transactional data (TD_DATA_SYNCH)
        task 1 -- provide open orders and goods receipts for F&R processor (CREATE_OUTB_FILES_NO_CROT_TD)
Sequence 3 -- start the F&R processor (AUOT_REPL_AND_OPRM)
        task 1 -- provide stock and consumption data (CREATE_OUTBOUND_FILES_CRIT)
        task 2 -- calculate forecast and requirements (SAFRUN_CRIT)
        task 3 -- perform post-processing of forecast and requirements calculation, such as DIF data (SET_DIF_DELTA)
        task 4 -- reset location environment (RESET_LOCATION_ENVIRONMENT)
        task 5 -- create of order proposals (CREATE_AND_RELEASE_OPS)
Sequence 4 -- prepare results for replenishment workbench (FC_AND_MD_SYNC)
        task 1 -- prepare results for replenishment workbench (READ_FILES_FOR_RWB)
Sequence 5 -- prepare results for analytics
        task 1 -- prepare results for analytics (NON_EXC_ANA)
Currently first four steps in the dispatcher profile is successfully executed, fifth one ends up in error and rest remain in the "initial" status.
Thanks
Sharad

Hi,
I logged in the forum after long time. We had lot of issues in running dispatcher and all of them we could resolve.
Since its been long time, I am not sure if you are still looking for answer.
If you could let me know any specific issue you are having, I will try to answer that.
Thanks
Sharad

Message types not in BD64 and WE20,but idocs are passing

Hello ,
we are facing a strange scenario.
between two partner systems A and B, 4 message types are maintained.
Idocs exchange to and fro.
but in system B, few idocs are visible which are having sender as system A.
but if i check in system A, these idocs are not sent at all.
this emssage type is not maintained in either of the partner profiles as well.
can anyone throw light what is happening ?
Regards,
Chaitanya

solved by restarting

Firefox will download (or send to Word) .docx files but not .doc files and the application settings are the same for both.

I have tried resetting the application settings for Word 1997-2003 -- browsing for my Word 2007 program, instructing Firefox to save the file, or to ask me what to do. In all cases, Firefox simply opens a new blank tab. I have also tried resetting the setting and closing then reopening Firefox.

Hello,
With firefox 4.0.1 I encountered this problem too. '.doc' files don't open the 'Ask Always' Popup asking either to open or save the fine.
This works fine for 'docx', 'ppt' or other file type.
I only encountered this problem since I upgraded to FF 4
My application setting for both Word extension type are the same.
Any solution to this?
Bas.

SAP's Customer Network for R&D and Engineering

Just want to make the PPM folks aware that SAP started the "Customer Network for R&D and Engineering".
See also this post in the [PLM Forum|SAP's Customer Network for R&D and Engineering;.If you are interested to participate in the Network, just drop me a mail with your contact details.
Regards Renato

Dear Phillip,
Cloud enabled software can be easily deployed on-premises but not vice versa.
this could probably be the deciding factory, for every customer : - )
no one would want to block their future...
so even for on-premise, its better to start with cloud and go for hybrid model and i believe
if this lock is there.....
then every on-premise solutions will have a cloud solution.....
want to see your argument on, any one thinking, i want only on-premise, and i will not be needing
cloud solutions in near future..... also for hybrid customers, cloud first and then on-premise would be pain area.

Material Transaction and Move Transaction Managers are Going Inactive

hi
it was running previously but currently it becomes inactive.can any one tell in which table to look for the error related to this problem?
Kind Regards
Sayantan

Hi;
What is your OS and EBS?
It was working before? If yes what have you been changed on your system(patch etc)
Please check below note:
Material Transaction And Move Transaction Managers Are Going Inactive [ID 93507.1]
Material Transaction and Move Transaction Managers are Going Inactive [ID 98757.1]
Regard
Helios

SAP Mobile app Stock photo not work for network location

Hi Experts
I found if we use network location path (e.g.
servername\pic folder\) in SAP Business One General Settings -> Path, Picture Folder, then if we logon SAP B1 Mobile app from iPad/iPhone, and try to open stock photo, we will get error:
Processing Failed
Internal server error: contact your system administrator
It looks like it only work for local path, e.g C:\pic
Even we put path as :
local pc name\pic folder, it is also not work.
Any idea about this?
Thanks
Tim

The first link is a temporary fix for a machine that only one or two people will use. This will not fix the Library Machines that some 3000 users can use at anytime. I can not pre-add all these users every time we image a machine. We also loan out laptops and I need these machine to wirelessly login dynamically to the domain. But I also need these machine to allow access if these machine are removed from our campus and the wireless access is not available.
Thank again for the help and I hope someone at Apple can fix this soon. I going to have a hard time telling the client that thay can not use the OS that came with they're machine.

Continuous stock: whs movement not change Accounts and Costs?

Dear all,
our customer XYZ has a SAP B1 9.0 continuous stock company.
He needs to manage the goods (articles) he sells to one of his customer C0001 in a specific SAP B1 warehouse W1.
The goods are already invoiced and delivered but our customer XYZ doesn't ship them immediately (he holds the articles in one his warehouse W1 and wait for specific orders by C0001).
Our customer XYZ needs to know how many articles he has in the W1 warehouse, but he doesn' want SAP B1 makes any sort of registration on Balance Accounts and ProfitAndLoss Accounts when a Goods Receipt on W1 is created.
Also, most important, the cost of the article vave not to change when Goods Receipt on W1 is created.
Is it possible to solve this request in a SAP B1 continuous stock company?
Please, can someone help me?
Best regards
Emanuele

Hi Emanuele,
I am afraid B1 can't support this process directly. A work around is to send customer reserved invoice instead. Delivery should be hold until received customer's order.
If you want to have W1 not counting them, it is not possible.
Thanks,
Gordon

Issue regarding Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART in SAP TPM IP

Gurus,
I am facing an issue regarding SAP TPM IP ( HANA)
I have 3 Infoproviders
Planning infocube, Planning DSO1, Planning DSO2 and i created multiprovider and added these 3 infoproviders into it. I have created Aggregation level on multiprovider. Created Bex Input ready query on Aggregation level.
Issue is Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART.
I tried debugging it and found it is trying to read i_r_pro -> n_ts_part. It is populated with only 3 values (i.e. 2DSOs and 1 Cube), whereas <l_partprov>-partprov is referring to Aggergation level, hence read statement isn't successful, it is dumping.
The class CL_RSD_INFOPROV_CACHE->GET() method is trying to populate the N_TS_PART.N_TS_PART uses P_R_INFOPROV table which seems to be already populated. So, I debugged all the below methods to find out how the P_R_INFOPROV but couldn't find any clue.
Can any one help,it would be really help.
Thanks
Ashok

Hello Gregor,
On the launch of planning layout it throws an error message:
Planning is not possible RSCRM_IMP_CORE008.
When I debugged, i got to a point wherein
particular Real Time Planning DSO is
not getting retrieved under the MultiProivder in below class.
Class: CL_RSCRM_IMP_ACTIONS_SERVICE, Method: GET_INFOPROV is not
returning the real time Info-Provider Name(i.e. Planning DSO)
underlyingthe Multiprovider.
I've also tried to run the report mentioned by you for the Multiprovider but issue still exists.
Let me know, if you have any pointers on this topic.
Thanks,
Jomy

HT1212 I am trying to restore a phone that the screen does not work on, therefore I can't input my password. How can I bypass this and upload it to itunes?

I am trying to restore a phone that the screen does not work on, therefore I can't input my password. How can I bypass this and upload it to itunes?

You could follow the instructions in the support document that you linked from. There is a section regarding the passcode and the inability to use it or enter it. However, you may encounter more issues since you cannot use the screen.

I have a DVD stock in my Imact and the finder does not recognice it. How can I get it out?

I have a DVD stock in my Imact and the finder does not recognice it. How can I get it out?

Hold down the mouse button when shutting down, If that doesn't work, try holding the Mac sideways and shaking gently, then if you see the edge of the disc, use tweezers to pull it out.

Ipod is locked out and it tells me to try again in 23,204,020 mins how can i bypass this and reset it i tried hard resting it and it does not work

ipod is locked out and it tells me to try again in 23,204,020 mins how can i bypass this and reset it tried hard resting it and it does not work

Read this.

SAP Scripts for Stock Removal and Stock Placement ?

Hi All,
Can you please let me know what are the SAP script names and Transaction codes for Stock Removal and Stock Placements ?
Thanks,
Raj

Hi
Tcode is MIGO only (select Goods receipt) and mvt type as
Putaway (305, 315, and so on)
Stock removal (303, 313, and so on)
Transfer posting (301, 311, and so on)
regards
Yogesh

GTS Embargo block SAP Note 1638607 (848050 and 848313)

Hello Experts,
we have Problem with the GTS Embargo check.
It blocks orders after a BOP (SCM) run although not necessary.
I found SAP Note 1638607 (848050 and 848313) for this Topic. It describe to implement User-Exit SLL_LEG_CDPIR3_002 ( Exitname SLLLEG01 )
But this User Exit exist only in ECC System but we use GTS local in CRM.
I already implement this Exit for testing but its not called from CRM System.
In CRM this Exit does not exist.
Does someone know how I can implement this function in CRM ?
Is there any BADI I can use ?
Thanks and greetings
Florian

Hello all,
I found in spro under
CRM -> Transactions -> Settings for sales Transactions -> Business Add-Ins -> Badi Manipulate GTS Call
here i can enhance the functionallity.
Greetings
Florian

SAP WM Preallocated Stock Not bypassing GR and Putaway in GI Area

Similar Messages

Maybe you are looking for