SAP workflow logs for work item forwarding.

Hi All,
I just forwarded the workitem today to around 25 users. But I dont know where does this reflect in the logs. My workflow is waiting for approval in managers inbox.
And the workflow logs says ready state. And no where that I can see the list of 30 users that I have forwarded it to !
Thanks,
AC.

Hi,
I just forwarded the workitem today to around 25 users. But I dont know where does this reflect in the logs. My workflow is waiting for approval in managers inbox.
You can only forward the dialog workitem. Now go to workflow log. Clicks on agent button you will find the current agent to whom the workitme is belongs. After forwarding refresh your managers SBWP, workitem will not be there.
Thanks and regards,
SNJY

Similar Messages

Enhanced Notifications(SWNCONFIG) Vs Work-item Forward Program (RSWUWFML2)

Is there an easy way to find out the advantages of using Enhanced Notifications SWNCONFIG configurations over scheduling the work-item forward program RSWUWFML2? We are on Ep 7.0/ECC 6.0 and configuring UWL for work-item execution and receiving notifications. For occasional users, we are planning to send email notifications to the Outlook email addresses using RSWUWFML2 and the the SCOT internet Send programs. Are there any added advatnages of configuring Advanced notifications?
Appreciate any ideas.
Thanks,
Saurabh

Yes, there are several advantages, but you may not need all of them. It takes a little extra effort to set it up, but that's a one-time effort and we are not talking weeks or days.
However, the primary argument is that this is the standard solution for work item notification. So you are recommended to use the enhanced notification solution whether you need the advantages or not.
One advantage is additional flexibility in which work items should be checked. You can choose to send notifications to people who don't have new work items, but have not yet completed the work items they (probably) have been notified about before.
Another advantage is additional flexibility in message contents and the number of messages sent to the user. RSWUWFML2 lets you choose between one message and one message per work item. In the new solution you can also send one message per category, although I am not sure what a category is.
Further advantages:
- Multiple schedules can be set up, so you don't have to use SM37 to get an overview of your notification schedules and you can send notifications every hour from 09 to 15 and every 4 hours the rest of the day if you wish. There is a time zone field in the schedule configuration. Whether it is used just to make sure the job runs at the desired time or is even more amazingly advanced (only notifying users when their own time zone shows the same time) I don't know.
- There's more, but since I have never set it up myself I have not read all of the <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/b9/2a651eb04411d2b46f006094b9ea0d/frameset.htm">documentation from SAP</a> which includes typical scenarios to help you with configuration.
After opening the link, expand the hierarchy as follows: Reference documentation => Workflow system administration => Extended notifications for SAP Business Workflow.

Work item forward when dead line reached

Hi Every one,
I got change request to deploy the dead line monitoring for the purchase requisition workflow.
The workflow existing start with the agent determination step which will determines the approver and after that it has a custom user decision step( Dead line monitoring must be implemented for this task ) which will call the ME53N and if we say back it will give a pop-up with 3 options which are 'Approve' ,'Reject','Cancel'.The user will select one of the option and after that there is multiple decision step which have 3 branches will select one of the branch according to the user selected option and the flow continues so on.
Business Requirement:
If level 1 does not release requisition in one day, then it must go to Level 2.If level 2 does not release that requisition within three days then it must go to Level 3, escalation stops at level 3 and the work item must stay until unless level 3 make the action on the work item.
The work item forward must be happen when escalation takes place not the notification.
Please let me know the information aforesaid is not clear at any point.
Regards,
Rajesh
Edited by: bhupathyraju rajasekhar on Jul 9, 2010 1:06 PM
Edited by: bhupathyraju rajasekhar on Jul 9, 2010 1:23 PM

You can do this in many ways. This is one of them:
- Create a loop that goes around for the number of approval levels (so, 3-level approval means loop 3 times)
- Inside the loop, create a 2-branch fork with only one mandatory branch to complete: one for approval and the other waiting for "expired" event
- Set up modeled deadline monitoring for the approval step. Once the deadline is reached, you need to fire the "expired" event which will process the other fork branch.
- After the expiration branch is executed, you can add any tasks to change the status, etc.
Hope this helps,
Abdullah

How to deactivate *Schedule Background Job for Work Items with Errors* SWU3

Hello Guys,
Can any one tell me how do I DEACTIVATE Schedule Background Job for Work Items with Errors in sap workflow SWU3.
Currently it is green which I don't want. I want to stop this service.
Regards
NK

Hello,
You could also just stop the job in tx SM37.
But why would you want to do this? As a test?
regards
Rick Bakker
hanabi technology

MDDataSetBW.GetCellData. See RFC trace file or SAP system log for more...

Ingo,
I am getting below error message in BO Test environment when I refresh WebI document.
MDDataSetBW.GetCellData. See RFC trace file or SAP system log for more details
It was working when we migrated the objects initially. Subsequently when we try to refresh WebI document we are getting the above error message. It still works in BO Dev environment and the no of records are the same in Dev and Test.
I am able run the underlying BEx query in SAP BW Test environment and it does return data.
I checked ST22 and SM21 log, but no details there.
Is it related to Authorization on the Universe or Bex Query?
We are in the middle of UAT and not able to move forward. I would greatly appreciate your input.
Thanks
Ram

Ingo,
I ran the zip file and added the required entries to registry.
And then I tried to reproduce the error, but the files are not generated instead I noticeed below error message on the server:
The description for Event ID ( 7939 ) in Source ( Crystal OLAP Client ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Registry Access Error: , [HKEY_LOCAL_MACHINE]Software\Business Objects\Suite 12.0\MDA\Log\Modules: The system cannot find the file specified..
Does tha t mean we do not have permissons to read the registry?
I would greatly appreciate your input.
Thanks in advance.
Ram

Enqueue for work item n deleted by called application

Hi All
We upgraded from 4.6C till ECC6.0 and from then we receive occasionaly messages in SM21: Enqueue for work item 000001198539 deleted by called application.
This results in problems when 2 dialog task are executes after each other. Somethimes the second taks is not executed. I find in the log the following errors:
- Temporary error in result processing of work item 000001199739
- Error when loading component: Work item 000001198388 locked
- Work item 000001198388 locked by user WF-BATCH (enqueue error)
This is the head of the WF that's locked..
We implemented all relevant OSS notes regarding the message, but still we receive those messages (notes 1040693 - 1050793 etc) We are on support package SAPKB70012.
I have checked the code in our custom WF and in some background task we use a DEQUEUE_ALL. Can this be the problem? The WF worked perfectly in 4.6C.
CALL FUNCTION 'ENQUEUE_EFBKPF'
   EXPORTING
*   MODE_BKPF            = 'E'
*   MANDT                = SY-MANDT
     bukrs                = i_bukrs
     belnr                = i_belnr
     gjahr                = i_gjahr
*   X_BUKRS              = ' '
*   X_BELNR              = ' '
*   X_GJAHR              = ' '
*   _SCOPE               = '2'
     _wait                = 'X'
*   _COLLECT             = ' '
   EXCEPTIONS
     foreign_lock         = 1
     system_failure       = 2
     OTHERS               = 3
IF sy-subrc <> 0.
    RAISE locked.
ENDIF.
UPDATE vbsegk SET zlspr = i_zlspr
                WHERE ausbk = i_bukrs
                  AND belnr = i_belnr
                  AND gjahr = i_gjahr.
*                and ( zlspr = 'A' or zlspr = 'Y' ) .
COMMIT WORK AND WAIT.
CALL FUNCTION 'DEQUEUE_ALL'
       EXPORTING
            _synchron = 'X'.
Any help appriciated
Kristof

The entries we have solved by removing the DEQUEUE_ALL function in a method.
Still we receive somethimes errors in the workflow log
Temporary error in result processing of work item <n>
Message no. SWP030
Error when loading component: Work item <n> locked
Message no. SWP034
Work item <n> locked by user WF-BATCH (enqueue error)
Message no. WL605

Error handling for work item

Dear All,
     When I trigger my workflow from SWUE,the workflow containers must be populated with agent name.But it is populated only with 'US'.Please suggest.
     On the other hand, when I trigger my workflow from ME21N,the workflow goes into error.The error statement is "Exception occurred - Error handling for work item 000000954797".What is the problem?
    Please suggest the solution for which I will be grateful.
Thanks and regards,
S.Suresh

Dear ,
I use bus2012 as BOR and event as created.
When I create purchase order from ME21N,bus2012 is not triggering.Instead FREBUS2012 gets triggered which is a subtype of bus2012.
At SWETYPV,event linkage is activated only for BUS2012 and there is no entry at SWETYPV for FREBUS2012.
Though I configured the workflow with start events:BUS2012->created,why FREBUS2012 should trigger my workflow which is not seen in SWETYPV?How to override it?Please suggest.
There is no start conditions for my workflow.Whenever purchase order is created,this workflow should trigger.
So,the parameters passed between even to workflow are
&_EVT_OBJECT&    ->        &BUS2012&
&_EVT_CREATOR&   ->     & WFINITIATOR&
Thanks and regards,
S.Suresh

Repeats for work items with temporary errors for background WI

Hi!
I have a task that generates a temporary error method in order to activate the Repeats for work items with temporary errors. It currently has 5 repeats at intervals of 2 min. After running above the WI-status is 'Error'. When Restart by SWPR runs only once and sends the message 'Work item set to error following 05 failed attempts'.
Please can tell me any way that when run again relaunch fixed repetitions.
I welcome your comments.
Thanks.
Regards,
Raisme Wilhelm

Hi Raisme,
Please show me since it is the design of the workflow. It is probable that you are inside a repetitive sequence that send several work items.
Best Regards
Victor Enzo
Edited by: Victor Enzo Montenegro on Feb 23, 2011 3:34 PM

Master Table for Work Items from BSP Application

hello guys,
just want to ask if there is a master table for work items (and other details) from BSP application?

Hi,
Ya its true but i want to connect my customized application to UWL in Enterprise Portal and there after approval i want my workitems to be punched in R/3 system.Is there any source code available,so that my application directly contact UWL in sap enterprise Portal as a link or workitems where user should have an option to approve or reject.
If u have any idea plz let me know.
Thanks in Advance
Regards
Santosh Saraf

UWL - direct URL needed for work items

We have NetWeaver Portal EP7 and use the UWL for work items from the ECC6 backend system. The work items appear as expected and users can process them correctly.
I now have a requirement for a direct portal URL for each work item that appears in the UWL so that it can be accessed directly instead of via the UWL. However, I'm struggling in my attempts to find or construct such a URL.
I would appreciate any help to resolve this.
Trevor

Hi,
Why do you need this URL? If you want the recipient to be able to display a work item from within an e-mail, this can help you : [Executing or Displaying Work Items from Within a Message|http://help.sap.com/saphelp_nw70/helpdata/en/c7/009f405660f418e10000000a1550b0/frameset.htm].
Regards,
Pierre

Enable service of objects -workflow overview-workflow log for IDOCS?

Hi everyone,
I need to enable service of objects -workflow overview-workflow log for IDOCS. Using object key i know how to go to log.Users need that functionality to be enabled for Idocs.For po and pr I can see so its not parameter settings.I feel its configuration somewhere I dont know where?
Can someone help?
Thanks in advance..

Hi VJ,
I'm facing the same issue, the workflow overview is not displaying the log from ME52N. But i have delegate my business object. Is there anything need to be done further.
Thanks & Regards,
Tina

Is it possible to run single workflow instance for multiple item changed or created?

I have created a SharePoint Designer 2010 approval workflow and I am starting this workflow on item created and modified . Now when I am adding and updating multiple items it is starting workflow for each item but I want to start only one workflow for all items.
I think it is possible in workflow 2013 but i want to use in
workflow 2010.
Is this possible? if yes then how?

Hi Resham,
From your description, my understanding is that you want to only start a workflow instance when multiple items are added or updated.
Per my knowledge, if we set workflow start on item created or modified, when we add or update multiple items, SharePoint will create a workflow instance for each item, it is unable to just create an instance for multiple items. It is same
between SharePoint 2010 workflow and SharePoint 2013 workflow.
You said it is possible in workflow 2013, do you have any references?
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Pulling Multiple Approver Names from Workflow Logs for One Work Item

I have a workflow design which requires multiple approvals per single work item. I happen to have another functional design that is also pulling data from those same workflow logs. Assuming I have multiple approvals at various levels for a single work item which table do I need to reference along with which fields to reference the different approvers per level of approval?

Hello,
The same tables. The principle is the same, just more agents.
regards
Rick Bakker
Hanabi Technology

SAP inbox work item forwarding is not working properly

Hi,
We are having problem in forwarding the work item in ECC Upgraded environment.
If USER1 forward a Work item to USER2, the work item is disappearing from USER1's inbox. also the same the same forwarded copy is available in the USER1 Outbox.
But it is not reaching the USER2's inbox. Not able to trace where it is going. the USER1 has the authorizations to forward the work items.
Is there any settings or changes that needs to be done in ECC6 for forwarding?
Help is appreaciated.
Regards,
Prathap

Hi!
Have you checked note 1308276 - WF: Forwarded work items are not displayed in the inbox.
Br
Geir

Work Item Forwarding

Hello,
Here is the scenario:
I have a task in a workflow. I have defined possible agents (in task definition) and responsible agents (in WF definition). The task attribute is "General Forwarding Allowed".
In the scenario, a responsible agent receives work item in his inbox. He then forwards it to the user who is NOT a possible agent of the task. The system gives the warning message but allows the forwarding. This forwarded agent then executes the work item.
Question
Is there a way to ALLOW forwarding of the work item to any user who is not a possible agent. But to PREVENT that user from executing the work item.
Any help would be appreciated and will be rewarded!
Regards,
Sandeep

Hi Sandeep
If you want to Allow general forwarding but restrict execution to only the users allowed, You need to rely on SAP's Authorizations.
If an action is allowed or not for a specific user, should not ("<i>can not</i>") be based on your workflow design. It must be based on your SAP security design (Your SAP Roles).
Remember that Forwarding isn't the only that another user can gain access to a workitem. If a user assigns a substitute that's not allowed to execute you will face the same problem, or even if an administrator executes the workitem from transaction SWIA.
If you are using SAP Standard functionality, the SAP Standard authorization check, for the called functionality, would be checked. In order to find out exactly which objects has been checked, you can use the trace functionality in transaction ST01.
If it's your own development you need to include the nescesarry checks in the ABAP code.
Regards
Morten Nielsen

SAP workflow logs for work item forwarding.

Similar Messages

Maybe you are looking for