SAP Workflow PO Approval using Blackberry

Hi Everyone,
I have a requirement where in which the PO Approval mails should be accessible using Black berry devices and approve/ reject from the Balck berry.
Now I was not sure in how to go about it, But found this blog which speaks about the same , but still finding my way how to go about.
/people/community.user/blog/2008/06/11/new-live-demos-for-blackberry-devices-available
Can anyone please explain how to go about this ...
Regards,
Raj

As you can read your e-mail from a Blackberry it should be possible to read the approval mails. But if you want to access an application from the Blackberry I think you will need the mobile solution from SAP.
Regards,
Martin

Similar Messages

  • Business package for leave approval in BlackBerry

    Hello
    We just want to know is there any Business Package available for
    Leave Approval using BlackBerry Handsets.We are using SAP Netweaver 2004s
    having EP 7.0 and R/3 system is ECC-6.
    Regards
    Debasish

    Debasish ,
                  I want to know the busines Package for Leave approvel in BlackBerry ,If  you find the Let me know.

  • How to route the information to approver with out involving sap workflows.

    Hi Developers,
    i have a doubt regarding how the requester filled form information will be send to approver with out involving SAP workflows in the portal.
    Normally i know the procedure where users fills the form with the approver details, the filled information is routed to approver UWL by trigerring a function module thru webdynpro.
    But i need to know is there any procedure to route the information without involving any backends.
    Thanks in Advance.

    Michele is correct - sneep will help you get the serial from the running domain on the M3000 ,
    and it is a good idea to install STB on your machines.
    If that isn't possible for you, then sneep can be downloaded directly from [http://www.sun.com/sneep]
    I believe that on this platform, sneep gets the serial from the output of prtconf.
    There is a minor correction to be made :
    After installed SNEEP use "man sneep" for all technical details.The sneep man page is not linked into the shared man pages, so you need to use
    man -M /opt/SUNWsneep/man sneep
    with out going to OK prompt (Banner)It is worth noting that the serial shown in the OBP banner is not the product serial
    that you will find on the physical serial tag.
    The banner "serial" is the decimal equivalent of the host ID, which you normally get in hexadecimal from the "hostid" command.

  • Online purchase request(PR) approval application using Blackberry.

    Hi,
    We are having ECC6.0 ABAP stack and have to implement Online purchase request(PR) approval application using Blackberry.
    Please provide related information.
    With Request,
    Krishna.

    Hi Venkat
    below links will help you regarding your quarry
    http://help.sap.com/search/highlightContent.jsp
    http://help.sap.com/search/highlightContent.jsp
    http://help.sap.com/search/highlightContent.jsp
    Regards
    Bandla

  • Polling for files using SAP workflow

    Hi all. First of all, I am not sure if this is the correct forum for this question.. Please let me know if it needs to be moved.
    I need to know if it is possible to use SAP Workflow to keep looking (polling) for files in a certain directory? I know I can do this in XI, but need to know if the same capability is available within Workflow? If it is possible, can anyone tell me how / where to find the information on how to do it?
    Any help is greatly appreciated.
    Cheers,
    Thomas

    Hi- Both the ways are possible
    1. Extended Notification (you need to configure and schedule prog.) which will send email automatically to outlook (based on user's mail id in SU01D) whenever the approver receives new approval task and the email will have link to Approve/Reject (based on the underlying WF step). When approver clicks on the link, it will ask for user id/pwd and approver can take decision
    2. You can also send plain email notification in WF using mail step to outlook and based on the mail, approver can take action from inbox
    Vinoth

  • 601 SAP Business Workflow - Build and Use

    Hello,
    I am working in ABAP for last 6-7 years. Due to project need planinng to take BIT 601 SAP Business Workflow - Build and Use  class.
    Please suggest if this class is good  to get started in SAP workflow. Pre-requisite for this class is BIT 600. I am not taking that class. Can I do self study and pick it up?
    Please suggest how I can get ready for workflow.
    Thanks,
    AP

    Hi,
    Org structure needs to be setup by HR, but you can set up org structure yourself. Its not a big deal. 601 will go thorough this process. Also you can have workflows without org structure.
    Go through this link
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70b074ac-fa1b-2a10-1587-bd084347fc56
    On help.sap.com, there is a demo for an absence request workflow. If you go through them, it should give you an idea of all the basic tcodes including the creation of a HR org structure, workflow build etc.

  • How to approve or release a Custom workflow release strategy using a prog.

    Hi There,
                  I am working with a custom transaction with release strategy using custom workflow. I am done with the module pool and workflow templates. And also I can able to start workflow using the FM SAP_WAPI_CREATE_EVENT.
                  My actual Issue is I have set of buttons in the module pool screen with names Approve (1 to 5) and Reject (1 to 5). When I press the "Approve 1" release strategy of the first person need to approved. Is there any Function Module or Classes for approving the workflow release strategy using buttons in screen.
    Thanks in advance,
    Viruman

    Hi
    Make use of the function module SAP_WAPI_DECISION_COMPLETE. To this function moduel pass the workitem ID and pass decision parameter value as 0001 for approve and 0002 for rejection action. You can check in this forum with this function module you will find lot of threads.
    If its not a decision step then you can make use of SAP_WAPI_EXECUTE_WORKITEM or SAP_WAPI_WORKITEM_COMPLETE.
    Regards
    Pavan
    Edited by: Pavan Bhamidipati on May 26, 2011 11:43 AM

  • Help on:SAP Workflow mass or batch approval

    Dear Experts,
    In my current project, I got a requirement that client want to approve training course registration requests in batch.
    e.g. Person A created a request and one workitem created, person B created another request and another worktime created.
    And two workitems are sent to one manager,and the manager wants to approve all the requests at one time.
    I want to approve using Java WD from UWL. And I know a soultion: write program to collect all the workitems sent to this manager and complete all the items by program.
    And belows are my questions:
    1. The solution I mentioned above, is it possible? If someboby done it before, give me some hint please.
    2. Is there any other better soultion or best solution for mass / batch workflow items approve? If If someboby done it before, also give me some hint please.
    I appreciate any of your replys.
    Thanks and regards,
    Chen Jian
    Edited by: Jian Chen on May 18, 2010 11:47 PM
    Edited by: Jian Chen on May 18, 2010 11:48 PM

    Hi,
    I agree with Rick. Altought I am not sure where the workitems_to_object function is needed.
    I would probably first get all the work items that the user has. So, when the WD application opens, you should get all the work items with the function X (X=probably the same function that the UWL itself uses to get the work items of the user (I don't remember it, but you can find it easily with RFC trace when openin UWL)). Then just filter all the course registration items. Get the course details based on the items, and then use the decision_complete function for the work items. And remember to take care of substitutes items too (if needed).
    And if you still want to use the standard decision functionality (that you are probably curently using?), that is OK - you can add a new action (=button to the UWL) to the course registration task - for example "Mass approval" - and with this you can launch your new custom WD application.
    In general you might want to check how the course registrations are approved currently and use the same function/method to do it from your application, but on the other hand if you are using the standard decision spep, you might not want to change anything.
    Regards,
    Karri

  • SOST sender column is blank using SAP workflow email step

    Hello,
    I used email step in SAP workflow to send emails. Sender is blank in SOST when I tried to see the email processing status. I am not sure, what need to done here to fix this. Can someone please help me on this.

    Hi,
    well yes you can,
    either store your recepients in a container,
    use a loop in ur WF and include your SendMail Activity inside it, and depending on a check variable send your Mails to different recepients.
    else.
    i had a similar case, what i did was i created a DL-List and instead of SendMail i created a task that called my customized method of sending mails (SO_OBJECT_SEND).
    try it and comment,
    if helpful reward
    Cheers,
    Aditya

  • Send email on external email address using sap workflow

    Dear All,
    I wat to send email( on external email address) to all users on under one position in org unit using sap workflow.
    I have retrived all users under given postion using FM   'RH_OM_GET_HOLDER_OF_POSITION'.
    Please let me know how to get their email ids.
    Thanks & Regards
    Rajshree

    Hi Rajasree,
    You can get the email address by passing the PERNR of employee and read the infotype '0105' (communication) with subtype '0010'.
    DATA: lt_p0105 LIKE p0105 OCCURS 0 WITH HEADER LINE.
    CALL FUNCTION 'HR_READ_INFOTYPE'
       EXPORTING
    *   TCLAS                 = 'A'
        pernr                 = pernr
        infty                 = '0105'
        begda                 = sy-datum
        endda                 = sy-datum
    *   BYPASS_BUFFER         = ' '
    *   LEGACY_MODE           = ' '
    * IMPORTING
    *   SUBRC                 =
       TABLES
         infty_tab             = lt_p0105
      EXCEPTIONS
        infty_not_found       = 1
        OTHERS                = 2.
    IF sy-subrc <> 0.
    * Implement suitable error handling here
    ENDIF.
    READ TABLE lt_p0105 WITH KEY subty = '0010'.
    email = lt_p0105-usrid_long.
    Regards,
    Pipit

  • How to setup PO approval through Blackberry

    Dear SAP Guru and Experts,
    Would like to check with you guys out there that can the standard SAP ECC6.0 be configured to approve the PO through Blackberry?
    Is there any other module that need to be installed in order to have the PO being approved through Blackberry?
    Normally how long (days) will it takes to configure the PO being approved through Blackberry?
    Thank you
    Regards
    Leonard Tan

    Hi, Refer below forums it may help,
    SAP Workflow approval using Mobile
    Offline approval on blackberry device in SRM
    http://ecohub.sap.com/api/resource/4dbffe10d2a8cbf8cec86272

  • Workflow Workitem approval from Handled Device.

    Hello,
    In SAP users will use handled device to approve SAP Workflow Workitems. Below are my questions.
    1. Is this possible with SAP Technology or we have to make use of some other application out of SAP.
    2. Is there any specific setting or configuration in SAP to enable users to approve workflow from Handled Device.
    3. Can link to SAP workitem be send in mail to  handled device and workitems can be opened from handled device.
    Any links or PDFs related to Handled Workflow Development / COnfiguration is much appriciated.
    Thanks in Advance.

    Hi,
    You will not be able to execute SAP work items in Blackberry or Iphone because of their technological restrictions. You have to develop BSP application and certain necessary customizing, SWNCONFIG, SCOT etc, have to be done.
    Regards

  • SAP Workflow and GRC 10.1 Workflow

    Hi all,
        We are in the midst of upgrading our GRC system up to 10.1 and some questions are coming up about the workflows.  In short are GRC workflows and SAP workflows the "same thing", i.e. if someone outside of the upgrade project were to learn how to create/maintain workflows within GRC 10.1 would they be able to turn around and run the same transactions within an ECC 6.0 environment and create SAP Business workflows?  From what I have seen so far in my searching is that, they have the same basic principle but very different implementation/maintenance.
    Any documentation that you are aware of from SAP showing this would be helpful as well.
    Thanks

    The basic mechanism is the same, but the GRC workflows are more fixed (they leave less room for the workflow to be changed) have build in screens, and relay on the BRF engine to determine approvers etc.
    Workflows in the ECC give you a lot more room for implanting the workflow however you wish (use a decision task, asynchronous tasks, develop your own custom approval screen etc.) and some time required you to implement changes to the workflow object (set a user status, release a document etc.) and don't usually use the BRF.
    So I would have to say that the answer is no, someone who learned how to implement the GRC workflows will not be able to turn around and immediately create workflows in the ECC.  

  • Is there a workflow for approval and Reversal of Regular Journal

    Hi All,
    Is there a workflow for approval and Reversal of Regular Journal .
    can we use  the standard park document workflow for the same .. ???
    Thanks ,
    Naval

    For such activities you would probably better make use of ISR.
    See [SAP Help - Internal Service Request|http://help.sap.com/saphelp_erp60_sp/helpdata/en/53/3120386827c23ce10000009b38f842/frameset.htm]

  • Workflow issues : - Approval of carts

    Shopping carts being raised and is being approved by user and by another approver.
    Rather then going any further this is just bouncing back and forth between the user and the approver.
    Any ideas?

    Hi
    <b>Please try this -></b>
    1) Check the conditions defined in that activated workflow (Txn: SWB_PROCUREMENT). Looks like the conditions defined here do not match with shopping cart data and hence SC could not find a workflow to be triggered.
    Suggest you to just give a condition like (&TotalValue& >=0) which covers all shopping carts.
    2) You may have only one start condition defined, but there is maybe an active workflow for the SC without start condition. Use transaction SWU0 to simulate the event "created" of object bus2121 and check there is only one workflow started. If you use only one condition, make an easier one like total value >= 0. Then refresh buffer with swu_obuf (not sure it is mandatory but safe).
    3) Also check the event linkages in txn SWE2 and SWETYPV
    4) The workflow without approval is defined in your start condition, so you should have the comment "start depends on a function module" or something like that. (I don't have any system now to check the message).
    The one with red dots: you shouldn't worry about this, probably message is activation link not active.
    The two other one (one and 2 steps), not sure if your error stands there, but to be sure check that activation link is not active (you can do this through customizing or with transaction pftc_chg).
    <u>Related link -></u>
    http://help.sap.com/saphelp_srm40/helpdata/en/17/40a86c773d6c41801d78af1a34b90f/content.htm
    Do keep me posted.
    Regards
    - Atul

Maybe you are looking for