SAP XI for openhub services

hi guys
i created OPENhub services as file as destination. i want to push this file to other DW. I am just curios how i can use SAP PI wil be useful?
how to configure SAPPI? from my application server how i can move the file to other data warehouse?
anyone used sap xi for open hub services?
please advise

I would agree with Raghavendra that simply FTPing from your BW server is the easiest method.... unless where you are has a standard of only using PI. There are a number of ways to go about the PI integration but typically you could create ABAP proxies to do the communication. The only time I have ever done this was when we needed to push data out in an xml schema. So then we sent it over to PI via proxy and PI did the conversion to xml. But it really is more overhead going through PI for simple outbound transfers, in my opinoin.
Thanks
Eric

Similar Messages

Standard SAP reports for detailed Service Entry Sheet data

Hi All,
I am searching for standard SAP reports to extract the detailed Service Entry Sheet data out of SAP. For example, I need the deailed information like Service Entry Sheet Number, Purchase Order Number, PO line item number, short text, Posting Date, External Number, Service number, Quantity, Gross Price, Cost Object (Order or Network or WBS), Personal Number (if applicable), workday. I couldn't find any standard report. So if anyone know it, please help me.
Thanks,
Ting

Hi,
In ME2S also you can get good report by execution and by clicking SO/ PO number.( where cost object can be viewed)
If you are very much specific, go for development
Regards,
Biju K

SAP Implementation for Media Services

Hi all,
Is there any best practise or some kind of guide to implement SAP for Media Services like printing, radio ,music, TV/broadcast, animation/games etc.....
If you have any kind of document or material or sites please share with me.
points will be given
Thx

Hi,
this is for sure a type of question that can be answered by using the search or checking http://help.sap.com. Additionally as already mentioned, it is against the rules to ask for or offer points.
Therefore the thread will be locked.
regards
Siggi

SAP Support for Pay Service?

A friend would like me to find out on this site for him:
Is there any service on this site or anywhere, that he can get support, even if it costs some money?
Basically he has a new BW job and he fears he may encounter a problem and would like to deal with it without showing his ignorance to his employer.
Sure, he has been researching on this site but sometimes it may be too specific that he may want o speak with someone on the phone or chat.
Is there any service here or out there, like that?
Thanks.

Thanks and that makes sense in the absence of an actual SAP BW support service.
Almost all products out there, Linux, NT, 2000, Netware, have those type of services so we thought there will be one out there for SAP BW.
The point is that, in a critical situation, one would like to quickly be assured of a guaranteed response instead of posting and hoping for a response on a forum, such as this.
I will leave the case open and see if others may be aware of any SAP BW support services on the market.
Thanks.

SAP IS for car service centers / workshops

Hi,
I am interested to know of a SAP solution speecific to a car service center / workshop.In fact,the modules mandatory.
DESH

Hi Desh,
As rightly said by kavita, SAP DBM is the right solution for SAP Automotive sales, Service & parts sales operations, it has various features such as technician / resources management, replacement car process, billing to multiple parties from the same order, integration with warranty claim submission & processing, workshop planning board & many others.
Regards,
Sachin Balmiki

SAP opportunity for IT/BPO services as well as airline domain

Hi All,
I need suggestions related to my career path that i am building. I am a consultant having around 4.5 +years of experience in sap consulting. I do for Mm/QM. I have support/implementation experience in manufacturing , process industry who were my clients during my professional tenure. Now i have decided to join a company (actually joined) which is into IT/BPO services ( they manage the activities through SAP( procurement being my part))and also has done sap implementation for airline domain. They do not do any other sap practice other than travel and airline. Now if i tell you , i have joined the company so that i can see how SAP is customized to match the requirement of IT/BPO services. This is a new domain for me and i think i have lot to learn from it. However i also see that i have the chance of being dynamic (vertical wise) as i have knowledge in manufacturing, process, it services/ airline. So i am thinking of staying and learning the same. But 3-6 years down the line i might again change my job with/into consulting firms/ solution providers. In that case will it be a right decision to stay with this organization and work profile or leave and move to the previous vertical in which i was (consulting firms/ solution providers)
Regards,
SS

Hi Sen,
as told by Vev Patra, if you thinks you are gaining knowledge about new things, please stay there because you will get a lot of things to be learn, when it comes to switch towards other side, it will not be a major issues for you, because after some years you will get domain knowledge in various module and your expertise also increased upto a level, and that will be sufficient for a vertical growth.
But if you are thinking that, there is nothing more to learn, then you can move towards your previous role, as not gaining any new thing, means you are not learning new concepts, and in this way you get struck at one point, which in needless.
So, it totally on your business aspects, if you thinks your previous role was good, then you can move onto it, but if you are enjoying the present role, please keep it with you, because it will also play a vital role in your vertical career growth in some manner.

SAP Best Practice for Self Service Procuement

Hello All,
I am trying to find Best Practice for Self Service Procuement in the help.sap.com.
But I couldn't find them. Please help me to locate.

HI Chek these below links if usefull for you
http://www50.sap.com/businessmaps/59E32671A32A411692387571253E292A.htm
help.sap.com/.../SAP_Best_Practices_whatsnew_AU_V3600_EN.ppt
www50.sap.com/.../DADF68FA02AB4E0482021E98D8BB986F.htm
Thanks,
Batchu

Re : Client and project acquistation - SAP for Professional Services.

Hi,
Any one could please let me give the links for Client and project acquistation , It Service Management and Proposal and order Management scenarios in CRM for Professional Services IBU.
Regards,
Sathish Prabhu.

Hi,
Go through this link:
http://help.sap.com/SCENARIOS_BUS2005/helpdata/EN/f5/675c41bb168247e10000000a1550b0/frameset.htm
Please award points if it is useful for you.
Regards
Suresh. J

SAP for professional services

Hello All,
We have an ECC 5.0 system.
We already use the ESS & MSS funtionality. We are looking to use the SAP for Professional services solution for India.
Kindly let us know what are the pre-requisites and also let me know what are the components to be activated in transaction sfw5.
Thanks.
Regards,
Chandru

Dear Ravi,
As suggested, please take this with SAP directly.
Regards,
Rakesh

SAP for Professional Services pack

Hi Guru's,
Please provide me the information on the following
1)      Can we install SAP for Professional Services pack on a running ECC 6 system?
2)      What is the Impact on existing ECC 6 on this installation?
3)      What are the perquisites for Installing SAP for Professional Services?
4)      Integration with Microsoft EPM server possible? To which extent?
5)      Is SAP for Professional Services is available in any SAP Enhancement Package for ECC 6?
Regards,
Ravi Duggirala

Hi Ravi the following are my answers to your points:
1) Can we install SAP for Professional Services pack on a running ECC 6 system?
Yes
2) What is the Impact on existing ECC 6 on this installation?
No impact on the existing set up. We have to add cProjects suite with ECC 6.0.
3) What are the perquisites for Installing SAP for Professional Services?
If you are looking for full IS-Professional Services then you need CRM, ECC, cProjects and BW. If your organization is into NPD and if you have critical mass in resources then you can go for xRPM also.
4) Integration with Microsoft EPM server possible? To which extent?
I don't know exactly what is EPM?
5) Is SAP for Professional Services is available in any SAP Enhancement Package for ECC 6?
ECC 6.0 service pack 11 will have some part of modules specified above. But CRM and BW are seperate modules, which needs to be installed seperately.
You can award points if at all this info helps you.
Apart from can you eloborate on your requirement. I can help you if at all you are interested.
Regards
Suresh. J

Prerequisites for OS service pack upgrade from SAP end.

Hi All,
I Have AIX 5.3 OS at TL 08 and Service pack 1 level JS 23 and JS12 blades.
IBM wants to upgrade it to TL 8 SP7 as the IBM centre supports TL8 SP7 for AIX 5.3 JS23 Blade.
So we are planning to go ahead with SP enhancement to SP7 from SP1. Are there any pre-requisites from SAP end for upgrading the same.
Regards,
Priya

Check
Note 1119631 - Using SAP systems with AIX 5.3
for possible problem/issues with different TLs.
Also check with your database vendor if the target level is supported.
Markus

ESRI SAP For customer service

Has anyone had experience integrating SAP with ESRI for customer service work within a utility? I am seeking lessons learned from an implementation such as this.
[GIS example|<a href="http://www.freeimagehosting.net/">[img]http://www.freeimagehosting.net/uploads/264f444180.jpg[/img]</a>]

EP2005 wrote:
Where do I even start! I called about 4 times had issues with my dial tone on my phone. Had the same customer service rep attend my call did not help at all but dislike her attitude and her way of customer service very rude and unprofessional. I had the same issue happen to me before and did not have this entire drama go on like this, but my issue was taken care off right there and then. Her name was alissa or elissa one of those I was very upset then she hanged up on me. I called back this time i had a man for a representative and he then transfers the call to the same rep female and she raised her voice at me. I was hanged up once more i called again asked to speak to the supervisor another customer service female rep did the same thing and said she'll help me and was testing my phone line and while I was using my cell to call her she hanged up again. I've never been so disappointed with comcast after all the years I've been using their service.. now I would have to decide if i still want to keep using their cable services.To report this and get your services repaired try this: Send an email to: [email protected]
Include all of your information, full name, service address, phone numbers where you can be reached easily, as well as the phone number associated with your account, your account number, and details about all the issues you have been having. Also include a link to this post.

What is SAP for Professional Service Providers?

Hi people!
I need to know what is SAP for Professional Service Providers and for what I use it?
Thanks!

I just googled it & got the following
<a href="http://www30.sap.com/industries/professionalservices/customersuccess/index.epx">link</a>.
~Suresh

Net price zero for SRM service central contract in SAP ECC

Hi
Net price in backend ECC is showing as zero for SRM service central contrracts, all other price fieids are fine expect net prices. We have no issues for material contract.
Does any one had similar issue of net price zero? I have tested this scenrio in couple of SRM 7 landscpape all are with similar behaviour. Is it standard?
Your response is highly appreciated.
Regard
Prashanth K Saralaya

Hi prashant
I never tried service . but you can see this below symptom for you.I extensively worked on Material contracts.
Are you creating contract from Process contract or Via RFQ
Note 1272305 - Total value wrongly calculated in Contract Service lines
Symptom
We create a Service contract in the R/3 Backend from RFQ. During the transfer we calculate the gross price based on the quantity,price and price unit. (ie) The field ESLL-BRTWR is filled with following formula in the idoc processing. ls_e1edc20-BRTWR
= ( is_item-price * is_item-quantity ) / is_item-price_unit.
AS total value of the service lines is calculated based on the field NETWR which is passed as blank from SRM, during recalculation total value when we change the gross price of one of the service lines in r/3, it is required to fill this field
till PI values are brought correctly till posting to ECC. ?
Note 1123292 - Net Price wrongly calculated in plug-in MAP_BLAORD_SERVICES
my experience in GOA
Note:-
2 set stream of DATA comes from SRM as BLOARD and COND_A ..
Even some times when we reprocess failed IDOCS in BD87 in ECC ( comes contract data from SRM as GOA and failed due to some data validation in ECC). now data issue was fixed at Material master level. and
if we forget to reprocess COND_A - BLOARD creates a successfull GOA but net price shows as ZERO for each material and when you post the COND_A data and correct price will be updated in ECC contract. so kindly check price data reaches or not not or price calculation failed in ECC.
Muthu

SAP Supplement for DS 4.0

Hi,
Where can I get the SAP supplelemnt document for data services 4.0. I was able to find the 4.0 supplelments for oracle, JD Edwards etc but not for SAP. I am interested to know if there are any additional features introduced in 4.0 to extract data effectively from SAP BW (DSO or openhub destination). Currently using 3.1 we are facing lot of performance issues while extracting huge volumes of data from DSO. Using Openhub destination as source would improve the results - thoughts?. Any tips or suggestions for improving the performance while extracting data from BW using DS would be really helpful.
Thanks in advance.
Sri

HI,
here you can find the document you searched for.
http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_ds_sap_en.pdf
Have you already downloaded and installed DS 4.0?
Greets
Daniel

SAP XI for openhub services

Similar Messages

Maybe you are looking for