SAP_XI_IDOC/IDOCXmlToFlatConvertor fails with Enhanced Idoc
Hi All ,
We have used the PI conversion module SAP_XI_IDOC/IDOCXmlToFlatConvertor in a number of Idoc-To-FlatFile scenarios and it is working fine.
However recently we tried to use it in a scenario where the target file structure is that of an enhanced Idoc.
In this case, the receiver channel (where the module is configured) fails with the error message, Idoc metadata not available in ECC.
We have tried the following:
1) Checked NWA connection for RFC Destination and JCA connection factory : Working fine.
2) Loading Enhanced IDoc in IDX2: Working Fine.
3) Change the receiver agreement to point to a Standard IDoc instead: Working fine.
Have any of you been facing the same issue and/or could you guide us to a possible solution.
Thanks,
Abid Ali
Hi Ali,
We are also facing exactly the same issue with a custom IDoc while converting on the receiver side.
It is actually interesting that the module "SAP_XI_IDOC/IDOCFlatToXmlConvertor" works fine for the very same idoc and fails to recongize the metadata information while converting from Xml to Flat.
Did you have any luck in getting this resolved?If so,can you please provide the details.
Thanks
Narendra
Similar Messages
-
Error in CC while using SAP_XI_IDOC/IDOCXmlToFlatConvertor module
Hi,
We are getting an error in CC monitoring while using SAP_XI_IDOC/IDOCXmlToFlatConvertor module for converting IDoc XML to flat file. Below is the error text:
"Message processing failed. Cause: com.sap.conn.idoc.IDocParseException: (7) IDOC_ERROR_PARSE_FAILURE: An IDocConversionException occurred while parsing IDocXML for type <ZDELVRY3>: state=READING_FIELD_VALUE_TAG, charPosition=7404, lineNumber=2, columnNumber=7366"
Any suggestion how to resolve it.
Regards
PraveshPlease check the OSS note below and install the mentioned patch accordingly:
[Note 1278687 - Exception in the IDocXMLProcessor (IDOC_ERROR_PARSE_FAILURE)|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1278687]
If it persists, check if are there any mapping errors on the Audit Logs for the failed message. -
IDoc failed with the error massaeg "Instance of object type could not be ch
Hi All
I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
Message type :PORDCR
Basic type : PORDCR05
Message no. BAPI003
Status : 51
All POs are get uploaded in SAP during Cut over activities only.
Please suggest on this.It will be a great help.
Thanks
AjitHi
After uploading POs into SAP we are changing quantity and value in PO in Legacy system, and for this all IDocs are failed, subsequently these changes are not triggering to ECC.
Please help
Thanks
Ajit -
RSEOUT00 failing with "Could not write IDoc to file" TPRI_DEF table
Outbound Idoc processing fail with the following error:
Could not write IDoc to file
Message no. EA299
Diagnosis
The system could not convert data from the data record 000027.
Procedure
Check the port definition of the receiver port.
You can use the "Continue despite conversion error" option to write the IDoc to the file from transaction BD87 with replacement characters.
Short dump indicate that there is a some junk character in th e TPRI_DEF for program SAPLSPRI that it is unable to convert.
I have set the flag on the we21 port to "continue despite conversion error" and that seem to help, but I would like to figure out how to fix the junk characters from coming through from the TPRI_DEF table.
This is what shows up in the short dump after RSEOUT00 is run.
TPRI_DEF / / : : 00002932
010GV21 \0\0\0\0\x0006āȂ耀㐱〲\0\0嬇\0ሟ鴂푎眩\x0802儔잏퉓
I do not see any entries for area "GV" in the table, there is one for "GF". which has no user assigned to it and it is of key version 21.
I am not sure if the table is supposed to have an entry with no user assigned?
thank you for looking at this issue .HI Jurgen,
we have the same issue, chinese charecter is in PO text header. so facing error. If we click unicode format then it works fine as my testing in development.
I just want to knom what is the impact if i clicked directly unicode format ?( with refernce to your reply above " have you set the Unicode format flag directly above in WE21?" )
I doc is going from SAP sytem - (PO information )
Pls adivce..
waiting for your reply..
Thanks in advance -
IDOC Posting To XI Failed With Status Text "::000" in SM58
Hello Gurus
Can u please suggest me how to overcome the problem with Custom Idocs while trying to send from SAP R/3 to SAP PI(XI).
The status text is displaying as "::000" with no other details, in SM58 of the sender system i.e. SAP R/3.
The Idocs status in the sender system is showing as 03 with the message "Idoc sent to sap system" in transaction BD87.
So I am getting confused where I missed the configuration.
Please suggest how I can troubleshoot the above.
<<Text removed>>
Regards,
Rk.K
Thanks in advance .
Edited by: Matt on Jun 24, 2011 9:58 AMThanks a lot for your support.
I have tried all the suggested solutions......but my problem was not solved.
The Metadata should be automatically created when the IDOCS successfully received by the XI server.
If it is not created then we should clear the SLD Cache in XI and try to create a new Metadata by giving the Custom IDOC Name and Port.
Even I tried with a Standard Idoc ORDERS05 , but I failed to do so.
After doing the above step I am getting the Information pop-up message "I::000".
Regarding RFC, I have created 2 users in both the systems with the same name(ALEREMOTE) of type "System".But,I am unable to Remote Login from XI to R/3 whereas the vice -versa is successful.
Are there any chances for this being the reason for failure of Idoc processing?
Such information message"I::000" is completely inexplainable.
Kindly, suggest a solution for it.
Thanks. -
IDOC is Getting Fail with - 56 Status EDI Partner profile not available
Hi,
I am trying to Post invoice Data into IDOC on ECC Side.
My Scenario is File u2013 XI u2013 ECC(IDOC).
But It is Getting Fail with 56 Status u201C EDI: Partner profile not available u201C
On Control record I am getting this
Port BLANKKKKKKKKKK
Partner Number CLNTDEC110 Logical system for Client
Partn.Type LS Logical system
Function BLANKKKKKKKKKK
Port SAPDPI
Partner number CLNTSAMPLE
Partn.Type LS Logical system
Partner Role BLANKKKKKKKKKK
My configurations are Like this :----
On ECC Side MY SID is DEC
On ECC side I have two logical system in CLNTDPI100 for PI
CLNTDEC110 for ECC.
I have Partner profile on ECC system on CLNTDPI100 logical system - we20
Added message type in inbound side of partner Profile (INVOIC-INVOIC02)
ON SAP PI/ XI System MY SID is DPI
IDX 1 has Port name SAPDEC
On Message mapping EDI_DC40 is mapping with constants with below given value
<INVOIC02>
<IDOC BEGIN="">
<EDI_DC40 SEGMENT="">
<TABNAM> </TABNAM>
<DIRECT>2</DIRECT>
<IDOCTYP> </IDOCTYP>
<MESTYP>INVOIC</MESTYP>
<SNDPOR>SAPDPI</SNDPOR>
<SNDPRT>LS</SNDPRT>
<SNDPRN>CLNTDPI100</SNDPRN>
<RCVPOR>SAPDEC</RCVPOR>
<RCVPRT>LS</RCVPRT>
<RCVPRN>CLNTDEC110</RCVPRN>
</EDI_DC40>
Regards
PSCheck the following :
in We 02 which partner number is displayed just in the posted IDOC -> 2nd coloum in the IDOC list .and verify if the
same you have in Partner profile. Actually this details comes from ECC business system's logical system name which you give in SLD.
in we 19 - take the error iDOC numner and open the IDOC ->click on the first line -> check entries as you mentioned
above sender port should be PI port not empty.you need to check the partner profiles properly
follow these steps
1. create a RFC destination of tyoe H for Pi system- 2. create a Port and assigen the RFC destination to it
3 create logical system for PI BD54 PICLNT001 say , 4 with the same name create a partner profile in We20
in parter profile maintain the inbbound message parameters and add the PI port as receiver port in it .Give the basic type also .
now
for sender details in ur case PI : u have port (defined in PI IDX1),patner number (LS defined in ECC PICLNT001), parter type LS.
for receiver you have port defined (as above), partner number the logical system for ECC system.
in we 19 ,, edit the control record as above and go to the tab inbound processing and test the internal posting
it should work fine. in the adapte specific attribuet for receiver ECC system , maitain the same LS name , if any wrong entry is
there then change the LS in sld to poing to correct LS/
refer this
http://www.riyaz.net/blog/xipi-settings-in-r3-partner-system-to-receive-idocs/technology/sap/26/
Regards,
Srinivas -
Idoc failed with status 51 for Warning/Information messages
Hi All,
We are trying to create some Sales Orders with the help of Idocs. We are facing some problem as mentioned below.
1.There are some warning messages/information messages written in standard Sales Order User Exit USEREXIT_SAVE_DOCUMENT_PREPARE
2.As soon as the Idoc processing reaches any of these messages, it considers them as ERROR message and Idoc fails with the status as 51 which is not expected.
3.Also, I see that the Sales Order is saved with the data that has been passed in the Idoc.
Is this the standard behavior ?? (Or) Is there any EDI related configuration setting which can be used to suppress these kind of messages in Idoc Processing ??
Any help on this would be highly appreciated.
Thanks,
Babu Kilariif your IDOC has status 51 then it is not posted, hence your sales order cannot be created from this IDOC. of course this error behaviour can be originated by the user exit.
please read OSS note Note 747631 - Some tips when testing idoc_input_orders -
Query reg Variable Substitution with enhanced interface mapping
Hi All,
The scenario is IDoc to file using enhanced interface determination (message split based on some conditions) and the output file name should be based on a field value in the IDoc. So, I've tried using Variable Substitution Option in the receiver file adapter. But it's failing with the error 'com.sap.aii.adapter.file.varsubst.VariableDataSourceException'.
My question is does Variable Substitution works with Enhanced Interface Determination? Bcoz the outcome of interface determination is a main and sub payload.
IDoc Payload
<?xml version="1.0" encoding="utf-8" ?><HR_HRMD_A07><IDOC BEGIN="Constant"><E1PLOGI SEGMENT="Constant">
<E1PITYP SEGMENT="1"><E1P0000 SEGMENT="1"><ENDDA>99991231</ENDDA></E1P0000></E1PITYP></E1PITYP></E1PLOGI></IDOC></HR_HRMD_A07>
Variable Substitution XPATH, which I've mentioned is payload:HR_HRMD_A07,1,IDOC,1,E1PLOGI,1,E1PITYP,1,E1P0000,1,ENDDA,1
Thanks in advance.
Regards,
Joe.Hi,
It was the problem with the capital letters for the variable field. We changed it to small letters, then the issue is resolved.
Thanks,
Joe. -
Hi All,
I have created a custom idoc for creation of master data in the system. This custom idoc is using a custom function module to process the idocs. In the FM i have used Call transaction method to upload the master data in the sap system. Everything seems to be working fine.
But the problem is that whenever any external system creates more than one idoc, first idoc is posted successfully while others fail with an error message "No status record was passed to ALE by the application.". Please let us know how we can resolve it.
Correct Answers will be rewarded.
Regards,
Sridhar.Hello
Refer to following thread:
The specified item was not found.
Thanks
Amol Lohade -
Attempt to process file failed with Exception in XML Parser-format problem
Hi all,
Iam getting an unusual error in the J2EE stack in XI.
And the message is:
006-11-30 17:31:07 Error Attempt to process file failed with Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)(:main:, row=1, col=1044002) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)' 2006-11-30 17:31:07 Error Exception caught by adapter framework: null 2006-11-30 17:31:07 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
My scenerio iam posting IDOC to a flat file with content conversion in the receiver side,the mapping got executed successfully and in the audit log i found that the error was after the 'Start converting XML document content to plain text'.
This means that error occured during content conversion of XML to the prescribed file format.
Can anyone suggest any better approach using which we may trace the junk data in IDoc. Manual adhoc approach could take time and is error prone.
Thanks in advance...
karunHi Bhavesh,
Thanks for the early reply. I checked the mapping and everything is fine and the output is also in valid XML format.
The audit log shows that the mapping got executed successfully and the error is after the step 'Start converting XML document content to plain text '. Is there any constraint in the file adapter regarding the message size for parsing.
2006-11-30 17:30:50 Success Transfer: "BIN" mode, size 2912595 bytes, character encoding -
2006-11-30 17:30:50 Success Start converting XML document content to plain text
2006-11-30 17:31:07 Error Attempt to process file failed with Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)(:main:, row=1, col=1044002) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)'
2006-11-30 17:31:07 Error Exception caught by adapter framework: null
2006-11-30 17:31:07 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
2006-11-30 17:31:07 Success The asynchronous message was successfully scheduled to be delivered at Thu Nov 30 17:36:07 GMT 2006.
2006-11-30 17:31:07 Success The message status set to WAIT.
2006-11-30 17:31:08 Success Acknowledgement creation triggered for type: SystemErrorAck
2006-11-30 17:31:08 Success Acknowledgement sent successfully for type: SystemErrorAck
2006-11-30 17:36:08 Success Retrying to deliver message to the application. Retry: 1 -
RFC Lookup's in message mapping fail with RuntimeException for no reason
Hi guys,
We have developed interfaces that execute a lot of RFC's from Message Mapping, by making use of RFC Lookup API.
In ID, in the corresponding RFC Receiver Communication Channel we have set the number of maximum connections to 100.
However, when a big number of Idocs with lots of items is sent to XI some messages fail in XI because mapping fails with a runtime exception that is not correct, since there is a return value found from the execution of the RFC function. And when I am testing the mapping in Test mode of XI IR, the mapping is executed successfully.
Do you think that by increasing the maximum number of connections in Communication Channel, it will take effect?
EvaggelosHi Evaggelos,
DECREASE, may be til 10.
Regards,
Udo -
Hi,
I am trying to install certificate services on a windows 2008 server (R2 ENT SP1) with a PCIe nCipher HSM module installed on it. The version of nCipher SW is = 11.30. It is a RootCA, and I am trying to use a key that is already stored in the HSM (I
have done this before with a PCI HSM (older HW version)). I select “Use existing private key” and “Select an existing private key on this computer” on the wizard, then i change the CSP to nCipher and click on "search" the key I am looking for
appears and I select that one. I repeat, I have done this before and it works with a PCI HSM module.
The installation is finished before being prompted to insert the operator cards, and it ends with two errors:
<Error>: Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
And:
<Error>: Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct state to perform the requested operation.
0x8007139f (WIN32: 5023)
The servermanager.log says:
1856: 2014-07-23 18:27:48.195 [CAManager] Sync: Validity period units: Years
1856: 2014-07-23 18:27:48.928 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x800703E5): CCertSrvSetup::Install: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:48.928 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress.
0x800703e5 (WIN32: 997)'
1856: 2014-07-23 18:27:48.928 [Provider] Adding error message.
1856: 2014-07-23 18:27:48.928 [Provider] [STAT] For 'Certification Authority':
And:
1856: 2014-07-23 18:27:49.053 [CAWebProxyManager] Sync: Initializing defaults
1856: 2014-07-23 18:27:49.162 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x8007139F): CCertSrvSetup::Install: The group or resource is not in the correct state to perform the requested operation. 0x8007139f (WIN32: 5023)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:49.162 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct
state to perform the requested operation. 0x8007139f (WIN32: 5023)'
1856: 2014-07-23 18:27:49.162 [Provider] Adding error message.
Has anyone experienced this before? Am I missing something here?
Any help will be very appreciated
Thanks in advance
Best regards
Alejandro Lozano VillanuevaHi, thanks for your support.
I have been playing around a bit with some ncipher commands and found this:
C:\Program Files (x86)\nCipher\nfast\bin>cspcheck.exe
cspcheck: fatal error: File key_mscapi_container-1c44b9424a23f6cddc91e8a065241a0
9aa719e4f (key #1): 0 modules contain the counter (NVRAM file ID 021c44b9424a23f
6cddc91)
cspcheck: information: 2 containers and 2 keys found.
cspcheck: fatal error occurred.
If I perform the same command on the original server (the server with the original kmdata folder and with the running RootCA services):
E:\nfast\bin>cspcheck.exe
cspcheck: information: 2 containers and 2 keys found.
cspcheck: everything seems to be in order.
Strange?
Moreover, when I do a csptest.exe command (also on both servers, i find this)
On the new server:
C:\Program Files (x86)\nCipher\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.48
User key containers:
Container 'csptest.exe' has no stored keys.
Container 'Administrator' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has no stored keys.
Container 'csptest.exe' has no stored keys.
While in the old server:
E:\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.40
User key containers:
Container 'csptest.exe' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has a 2048-bit signature key.
Container 'csptest.exe' has no stored keys.
As you can see, the container called ROOTCA, which is the one that I use during the installation, says it has no stored keys. While on the old server, it says it contains a key. Why is this happening? I dont know, I am copying the complete
key management folder from one server to another and initialize the security world with that folder as I always do, and i dont have any errors during this procedure.
Do you know what could be the cause of this? or how can I fix this? Thanks a lot, best regards.
Alejandro Lozano Villanueva -
Issue in SAP_XI_IDOC/IDOCXmlToFlatConvertor
hi,
i am working with IDOCXmlToFlatConvertor to convert my IDOC to Flat file. i am expecting the data as below with EDIDC40
EDI_DC40
Z_EC_ENQUIRY_CREATION
Z_EC_ENQUIRY_CREATION_TMS
TMS_IX_IN LS TMS_IX
SAPMT4
LS MT4CLNT100
20134705094727
ZAP_ITSG_HEADER000
HEADROSENQYKE
SUP GTM
MAM 20130220020332PN001432 PRDCT4
1
but i am getting the output as below with out EDIDC40 and getting some extra numbers marked below
1
0000047110815000000
4 Z_EC_ENQUIRY_CREATION
Z_EC_ENQUIRY_CREATION_TMS
6
4 467
5
6
00000000000000
ZAP_ITSG_HEADER000
000004711081500000000000100000001
6
can some one suggest me how to fix this issue?
Thank You,
MadhavHi Madhav,
I am guessing you are using FILE adapter with Content Conversion on the Receiver side.
I yes then i guess your mapping is not producing the desired output or the receiver adapter content conversion is not configured properly.
For FILE Content Conversion please refer
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
http://help.sap.com/saphelp_nwpi711/helpdata/en/44/6830e67f2a6d12e10000000a1553f6/content.htm
Thanks
Abhishek -
Job is failing with the following error- Error calling a method of the tree
dear SDNers,
my question is where do i need to look for error.
Will this be an ABAP issue?
Please guide
DETAILS
In SM37 when we see the job XYZ, we get the following details.
Job Ln Job CreatedB Status Start date Start time Duration(sec.) Delay (sec.)
XYZ Canceled 16.11.2009 10:11:30 9 27
When the job log is checked this , we get the below details.
The job XYZ is failing with the following error.
Date Time Class No. Message
+----
+----
2009/11/16 05:03:01 | 00 516 | Job started
2009/11/16 05:03:01 | 00 550 | Step 001 started (program RBDMON00, variant
SBCI287, user ID ABCDEF)
2009/11/16 05:03:03 | TREE_C 000 | Error calling a method of the tree control
2009/11/16 05:03:03 | 00 518 | Job cancelled
Equest your assistance in knowing where to find the error for this.
I have no clue as to where and how i need to debug or where i should i be looking for error.
In BD87, the selection screen paramters that are given are changed on date (from and to) and IDOC status 51,66,69 and 64 and the message type is "Öutbound interface of picked shipments"
Please guide.
Regards,
SuryaD.
Edited by: SuryaD on Nov 23, 2009 5:36 PM
Edited by: SuryaD on Nov 23, 2009 11:14 PM> 1. There is a job name ABCDEF
> 2. When this job is run then the status shows cancelled and the job error log shows tHe details that "error calling a method of the tree control"
> 3.ThIs error also points fingers to /link to BD87 as seen in the job log " (program RBDMON00, variant \SBCI287, user ID KRISF)"
>
BD87 is an IDOC processing.
> My question to you Sampath.
>
> in order to answer your question on whether it is ALv or SALV.. please tell me as to how will i know which progrm is associated with the job ABCDEF?
>
Go to sm37 - double click on the job that was failed - Click on Step (on application tool bar) to get the program name - double click on the program name - new popup will be opened - then copy the program and variant
Go to se38 - enter the program - execute (F8) - choose the variant that is there in the background job - run in forground first
if the run is good - then check the program - SE38 - Display the program then see
I just saw the above message BD87... .if that is true, you dont have to do all these
I dont think it is possible to schedule a job with BD87. Is this the first time or is any job completed without errors for this? -
Attempt to process file failed with java.io.IOException
Hi,
The scenario is from Idoc to flat file and messages are getting processed successfully in XI. but in receiver communication channel error is coming:
Attempt to process file failed with java.io.IOException: Error during STOR/APPE epilogue: com.sap.aii.adapter.file.ftp.FTPEx: 426 Connection closed; transfer aborted.
MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error during STOR/APPE epilogue: com.sap.aii.adapter.file.ftp.FTPEx: 426 Connection closed; transfer aborted.: java.io.IOException: Error during STOR/APPE epilogue: com.sap.aii.adapter.file.ftp.FTPEx: 426 Connection closed; transfer aborted.Hi,
If you are using FTP then,
1. Make sure that the FTP sever does not have issues with Firewall or a Proxy server access.
2. Also verify that the specified FTP user ID has the necessary WRITE or overwrite authorization?
Regards,
Sarvesh
***Reward points, if it helped you.
Maybe you are looking for
-
For all of you looking to add additional language ...
First, to answer all of you out there like my self, who are looking for solutions to add extra languages to your phone such as chinese, spanish, french... etc... 1st simple answer is NO!! there are NO language pack you can download. 2nd, NO nokia wil
-
Searching OWB-Tutorial with Example to each component
Hi, i search a tutorial with a typical example to each component of OWB 11g. I have found this two links which was good for the beginning and an overview, but anyone know a better tutorial if possible in german language (that would be the best for me
-
I have a PC that is used primarily by 3 persons. Each of us speak different languages (Finnish, Dutch and Norwegian) English being the common language. Each of us would like to browse and have the meny-language in FF in our own languages. I'd like to
-
I am not able to delete the app icon (loading) of more than 20MB file app. I have downloaded them to my itunes but they just dont go away even after syncronising. just to mention i have 3G network but no wifi at present.
-
Solaris 10 installation says I changed boot device when I didn't
Hello, I'm new at Solaris 10, and have been trying to do a net install with Solaris 10 8/07 (127111-11, s10s_u4wos_12b) on a brand new (but older version of Solaris 10, which is now wiped out) V245 Sunfire. When it comes to setting up the disk for in