SAP XI over Business connector

Hi All,
As everyone is aware that SAP Business connector is no longer supported by SAP and XI has replaced it in quite many places.
I would like to know the advantages of XI replacing Business connector in a project scenario.Also any disadvantages that XI still has over BC?
I would like to have the reply in detail as this is required for suggesting XI as a replacement for BC.Also the cost benefits highlighted would be of great help.Inputs for this query would be highly appreciated and rewarded.
Thanks in advance!!

Hi Ramya & others,
we at Lost Bearings International have brought the BC2XI(TM) to the market and together with partners delivered successful migrations to XI using it as the underlying platform.
We are currently working on Version 2 of the migration platform to allow for a more scalable use for 100+ BC project migration scenarios at larger customer sites as well as a more generic migration process which will assist in migrations from other EAI platforms to XI on top of the current BC to XI one.
Best way find out more is to contact us directly through http://www.lostbearings.com/exponent/index.php?section=3 and we can discuss the evaluation steps to give you an idea about cost & time savings you can achieve through the BC2XI service offering.
Unfortunately the information on http://www.bc2xi.com is a bit outdated at the moment, but this should be updated in the near future.

Similar Messages

Forwarding XML/EDI from SAP Business connector to EDI (cloverleaf)

Hello,
We are having issues setting SAP up to work with the business connector and our EDI system - cloverleaf.
For testing, we would like to:
1. Create an idoc in SAP and send it to the Busness Connector.
2. Have the busness connector send the doc via XML to our EDI system cloverleaf.
Currently, I have things setup like so:
SAP/ECC6:
SM59: RFC setup as type T and works fine.
WE20: Partner Type LS:
I have 2 message types setup (in outboard: I have "orders" and in Inbound I have the same).
in WE21: I have a cloverleaf (our EDI system) to run with the RFC destination I setup in SM59.
On the Business connector, I have the following under routing rules:
From SAP to the Business connector:
Sender: 8805
Reciver: 10000000008
Message Type: Orders
ACL Group: none
Package: default
Main Flow Services: wm.PartnerMgr.flows.88605.1000000008:ORDERS
Transport: ALE (R3/IDOC)
SAP destination: RD1 (our sid).
FOR my outgoing to our EDI system cloverleaf:
I am using the sender: * - Not sure if this should be SAP or the BC.
Reciver: * - Our EDI system. our EDI system is listening on port 49001.
Message Type: Orders
Under URL (not sure about this one)
I have http://reg2lxap0725:5555/MessagingSystem/receive/BcAdapter/BC
I am however stummped on how the URL shold look..
Now, when we test the above config... I recive the following results in WE02.
0000000000003024 25 03 Green Light: IDoc Successful Green LS/ /SAPBC ORDERS05 ORDERS Outbox CLOVERLEAF
For some reason, we also have an "inbound" that fails.
0000000000003025 25 56 Red Light: IDoc Has Errors KU/ /0000088605 ORDERS05 ORDERS Inbox SAPRD1
My main question is however around routing...
We are trying to send these to our EDI system which is listening on 49001.
I am not sure how they want us to setup the routing rules to pass this over to the right port..
I have also searched the documentation, and have not found any real step by step guides, so I may be missing a few things..
Any advice to point me to the right direction is greatly appriciated....
Thanks everyone,
Richard

Hello Prateek,
Thank you very much for your answer. The AdapterGuide was really helpfull.
Now the routing rule is associated to the correct Service (that was a the problem). So the rule started to process the XML files from the folder (the XML files disappeared immediately after I corrected the rule).
But now my problem is that on the SAP side there is no inbound IDOCs so it seems the trasmission may failed.
Moreover under "Routing"-->"Transactions" I don't see these entries with the the current date.
Our routing rule is simple: "wildcard" "wildcard" "wildcard" "ALE (R/3 IDOC)"--><OUR SAP SYSTEM>
The SAP connection is working as I can test under "SAP..." menu.
Is there any other way to monitor what had happened with these XML files? I'm sure the BC processed as the files are gone, but there is no IDOC in the destination SAP...
Thanks a lot!

IDOC_ERROR_ILLEGAL_TYPE in business connector 4.7

Hi,
IDOCS are being sent from sap system to Business connector and conversion to xml is done through bc services
I am getting the following exceptions in business connector production server.I need to know the rootcauses of these exceptions and how they can be resolved
2005-11-25 08:15:40 GMT com.sap.mw.idoc.IDoc$Exception: (3) IDOC_ERROR_ILLEGAL_TYPE: The document does not correspond to the associated repository.
     at com.sap.mw.idoc.jco.JCoIDoc$JCoDocumentList.add(JCoIDoc.java:3095)
     at com.wm.pkg.sap.rfc.SAPSession.sendIDoc(SAPSession.java:671)
     at pub.sap.client.sendIDoc(client.java:356)
     at java.lang.reflect.Method.invoke(Native Method)
     at com.wm.app.b2b.server.JavaService.baseInvoke(JavaService.java:281)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
     at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
     at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
     at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
     at com.wm.lang.flow.FlowState.step(FlowState.java:430)
     at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
     at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:496)
     at wm.server.net.EmailTransaction$RunService.write(EmailTransaction.java:1375)
     at wm.server.net.EmailTransaction$RunService.run(EmailTransaction.java:1218)
     at com.wm.util.pool.PooledThread.run(C:/NT/Perforce/basis/4.1.0-terra/module/core/source/com/wm/util/pool/PooledThread.java:103)
     at java.lang.Thread.run(Unknown Source)
Regards,
priya.

I am with the same problem and it is apparently caused because the xml file is without encoding,

ABAP Query output to XML file using Business connector

Hi All,
I would request your help on to know, how can I read the output of ABAP query executed in SAP system via Business connector and then generate a XML file.
Also the existing business connector system, generates the XML file in encoding iso-8859-1. Where as customer wants the output XML file in encoding windows-1252.
Please help with your valuable ideas.
Thanks,

Hello,
possible solution:
1. create a remote function module (FM) in SAP which returns your needed data
2. create outbound map in BC for this FM
3. call this FM from BC in a flow
3. extract the result to XML (e.g. with service recordToDocument)
CSY

Business Connector 4.7 and EDI Module

Hi all,
I want to use the EDI Module offered by SAP for the Business Connector. Unfortunately the SAP offered the zip file only for release 4.6 of Business Connector.
Does anyone know if it's even so possible to import the EDI module in Business Connector 4.7?
Furthermore I need a schema for EANCOM 2002 D.01B which is not included in the available download packages. Can I use standard schema files and import them in the Business Connector?
Thanks,
Christina

Hi Jiri!
We are using the EDI-Module together with SAP BC 4.7 without any problems in various productive customer projects. Installation of the package does not cause any problems - functionality is the same.
By the way - as far as I know there is NO official "end-of-life" for the BC stated so far. In many cases a "migration" to XI is currently NOT necessary / wanted by our customers.
Regards, Andy

Using BAPI_DOCOUMENT_CREATE2 func. in Business Connector without SAPGUI.

We're using "BAPI_DOCUMENT_CREATE2" function to upload XML data to SAP system in Business Connector 4.7
We use SAPGUI in Business Connector to call the BAPI function.
But we found that there's a performance problem when using SAPGUI.
So, we want to use BAPI_DOCOUMENT_CREATE2 function in Business Connector without SAPGUI.
If you know how to do this, please let US know.
Thank you.

Hi,
You can also try:
1. pub.sap.client:createTID and assign created tid to variable $tid
2. INVOKE sap.map:outbound for your BAPI and assign created tid in step 1 to parameter $tid
3. pub.sap.client:confirmTID and assign created tid in step 1 to parameter $tid
It should work.
Krzys

Access Denied with Business Connector 4.7

Dear SAPiens,
I am trying to call a RFC-FM via a webservice from outside the SAP system via Business Connector 4.7. I always get a "Access Denied" Error message within the XML answer-envelope.
For testing I use the soapUI. I downloaded the WSDL from the Business Connector Developer and imported it to soapUI.
In soapUI I used the following coding for execution in a testcase:
<soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:mob="http://172.16.34.33/MobileDataEntry" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">
   <soapenv:Header/>
   <soapenv:Body>
      <mob:CustomerOrderCreate soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
         <DISTR_CHAN xsi:type="xsd:string">01</DISTR_CHAN>
         <DIVISION xsi:type="xsd:string">00</DIVISION>
         <DOC_TYPE xsi:type="xsd:string">ZMDE</DOC_TYPE>
         <PARTN_NUMB xsi:type="xsd:string">0000102642</PARTN_NUMB>
         <PARTN_ROLE xsi:type="xsd:string">AG</PARTN_ROLE>
         <REQ_DATE_H xsi:type="xsd:string">20080420</REQ_DATE_H>
         <SALES_ORG xsi:type="xsd:string">4920</SALES_ORG>
         <MATERIAL xsi:type="non:MATERIAL" soapenc:arrayType="non:MATERIALArrayItem[]" xmlns:non="http://www.webMethods.com/noNamespace/"/>
         <RETURN xsi:type="non:RETURN" soapenc:arrayType="non:RETURNArrayItem[]" xmlns:non="http://www.webMethods.com/noNamespace/"/>
      </mob:CustomerOrderCreate>
   </soapenv:Body>
</soapenv:Envelope>
The given answer is:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance" xmlns:xsd="http://www.w3.org/1999/XMLSchema">
   <SOAP-ENV:Body>
      <SOAP-ENV:Fault>
         <faultcode>SOAP-ENV:Client</faultcode>
         <faultstring>[B2BSERV.0088.9134] Exception occurred while processing the body of the message</faultstring>
         <faultactor>http://172.16.34.33:5555/soap/rpc</faultactor>
         <detail xmlns:webM="http://www.webMethods.com/2001/10/soap/encoding">
            <webM:exception>
               <webM:className>com.wm.app.b2b.server.AccessException</webM:className>
               <webM:message xml:lang="en">[B2BSERV.0084.9004] Access Denied</webM:message>
            </webM:exception>
         </detail>
      </SOAP-ENV:Fault>
   </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
I can call the function module without any problem from the Busines Connector Developer IDE.
I also can call the function without any problems in this way (by passing my credentials manually):
http://172.16.34.33:5555/invoke/MobileDataEntry/CustomerOrderCreate?DISTR_CHAN=01&DIVISION=00&DOC_TYPE=ZMDE&PARTN_NUMB=0000102642&PARTN_ROLE=AG&REQ_DATE_H=20080420&SALES_ORG=4920
Do you have any idea what is going wrong? Why do I get "Access Denied"? What causes this?
Best regards
Torsten

Hi Christian,
this solved my problem two weeks ago.
I actually run the solution with 'Anonymous' access, as I don't know how to submit the Username with soapUI (header entry does not work). soapUI is a generic SOAP testing frontend (see soapui.com).
Everything of our solution is under development at this time. I guess, that the final client service will not deal with those problems.
Nevertheless, you get the points...
Best regards
Torsten

GB e-filing - Business Connector Error

Hi,
SAP version: ECC5
Business Connector version: 4.7 SSL (along with Hotfix 5)
Our HR functional consultant is trying to execute the program RPCEOYG0 to generate XML data with Zip option to send forms to Inland Revenue. As long as the zip option is not chosen, the program works fine, respective forms are generated in XML and sent to Business Connector. When zip option is chosen, the program gives an error:
<b>
[B2BSERV.0026.9201] Unknown service: GBOUTGOING:HR
Message no. 3G001
</b>
According to the configuration guide, there is a service called HR_GB_EF_GZIP in the e-filing package that needs to be set up, in addition to the 6 other services. Thats all done and dusted. But it seems there is something wrong with the service itself thats causing the problem.
Has anyone faced this issue before?
Thanks and regards,
Shehryar

Hi Shehryar,
We are also facing the same error and issue.Can you please let us know where the problem lies.
When we give zip or unzip in both the cases we are getting the below error.
<b>RFC Error:[B2BSERV:0026.9201 UNKNOWN SERVICE GBOUTGOING HR</b>
SAP VERSION : 4.7
BC Version: 4.6
Waiting for your inputs .
Regards
Rani A
Message was edited by:
Rani A

Starting Business Connector as a window service

Hi All,
I have installed BC server 4.6. I need to run this as a window service. Any idea on this ? Currently i start the server from the command prompt. But if i close the window, the server goes down.
Your help is much appreciated.
Thanks,
sathya

Hi,
Normally the steps are:
1) Install BC Application
2) Download and implement Core Fix2 and Service Pack 3a (for 4.6)
3) Install all packages and connections to SAP Production
4) Set up BC application as Windows service
have you refer to SAP Notes:
516504 Business Connector 4.6 as Windows NT Service
421525 Business Connector as Windows NT Service
Regards.

Get Data from SAP over the Business Connector into a Java Programm

Hallo dear community,
i would like to receive data from the sap over the application business connector into a java programm. i work with the german book "SAP Business Connector 4.8 - Administration und Entwicklung".
Now i hand on the routing rule.
[Screenshot|http://h-2.abload.de/img/routingruleuyt9.png]
i don't know what i should configure here for receiving data, which i need for an java programm.
i will be very happy, when somebody got a tip or an source (tutorial) where i can find such a configuration :wink:

I think u r writing BDC for Uploading the data from excel flile to sap. for this is the code I am sending u can use then for Uploading data from excel to sap.
DATA: lv_filename TYPE rlgrap-filename.
FIELD-SYMBOLS : <fs>.
DATA : l_intern TYPE alsmex_tabline OCCURS 0 WITH HEADER LINE.
DATA : l_index TYPE i.
PARAMETERS : startcol TYPE i ,
      startrow TYPE i ,
      endcol TYPE i ,
      endrow TYPE i .
PARAMETERS: p_flnam LIKE rlgrap-filename.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_flnam.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
   program_name        = sy-repid
FIELD_NAME          = ' '
   IMPORTING
     file_name           = p_flnam .
MOVE p_flnam TO lv_filename.
Uploading the flat file from the desktop
START-OF-SELECTION.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      filename                      = lv_filename
      i_begin_col                   = startcol
      i_begin_row                   = startrow
      i_end_col                     = endcol
      i_end_row                     = endrow
    TABLES
      intern                        = l_intern
EXCEPTIONS
INCONSISTENT_PARAMETERS       = 1
UPLOAD_OLE                    = 2
OTHERS                        = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT l_intern BY row col.
LOOP AT l_intern.
    MOVE l_intern-col TO l_index.
    ASSIGN COMPONENT l_index OF STRUCTURE itab TO <fs>.
    MOVE l_intern-value TO <fs>.
    AT END OF row.
      APPEND itab.
      CLEAR itab.
    ENDAT.
ENDLOOP.
I hope it will help u.
Regards
Nayan

Business Connector work with ECC 6.0 or have to switch over to PI - Upgrade

Hi
Client want the upgrade their current SAP system from 4.6C to ECC 6.0.
Like to know if Business Connector would work with ECC 6.0 or they have to switch over to PI.
Please Help
Thanks

i think BC will work ,
chek the below thread for
what are abaper tasks during upgrade to ECC 6.0
what are abaper tasks during upgrade to ECC 6.0?
pls reward points if helpfull
regards
kummari
Edited by: kummari on Jul 4, 2008 8:05 AM
Edited by: kummari on Jul 4, 2008 8:20 AM

Any supports for SAP Business connector

Hello!
Has anyone knowledge in following areas:
- Has the SAP Business connector still any supports?
- What is the procedure to connect Lotus Notes and ERP 2005 (Do we need RFC-connects or RFC/BAPI?)
- Which support package stack and which kernel version are mandatory for Source Release 4.6c?
Thank you!
regards
Axel

Hi,
Fisrt of all pls don't cross post the same question(s) over different forums.
The BC is still part of NW04s:
http://help.sap.com/saphelp_nw70/helpdata/en/6f/1bd5c2a85b11d6b28500508b5d5211/frameset.htm
You don't specfy what you want to do with Notes, so here are some links:
http://help.sap.com/saphelp_nw70/helpdata/en/28/b7341c0f3e7a4494227dfaa130e520/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/e0/1059d2674d9f43907169400ac6618a/frameset.htm
Eddy
PS. Which type of SDN Ubergeek/BPX suit are <a href="/people/eddy.declercq/blog/2007/05/14/which-type-of-sdn-ubergeekbpx-suit-are-you">you</a>?
Deadline: June 15th

SAP Business Connector on Windows XP

I've been trying to get the SAP Business Connector 4.7 to work on Windows XP professional but haven't been very successful. The business connector seems to install okay, but when I try to start the business connector through the server.bat file it generates the following errors:
(loglevel = 4)
Loading WmPartners package
00000E [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.EmailTransport:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.EmailTransport
00000F [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:saveMessage: [B2BSERV.0026.9106] No method saveMessage in class wm.PartnerMgr.xtn.admin
000010 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:view: [B2BSERV.0026.9106] No method view in class wm.PartnerMgr.xtn.admin
000011 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.admin:saveRoutingRule: [B2BSERV.0026.9106] No method saveRoutingRule in class wm.PartnerMgr.gateway.admin
000012 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.admin:convertWildCards: [B2BSERV.0026.9106] No method convertWildCards in class wm.PartnerMgr.gateway.admin
000013 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.B2B:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.B2B
000014 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:editStore: [B2BSERV.0026.9106] No method editStore in class wm.PartnerMgr.xtn.admin
000015 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.FTPTransport:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.FTPTransport
000016 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:invokeViewService: [B2BSERV.0026.9106] No method invokeViewService in class wm.PartnerMgr.xtn.admin
000017 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:viewMsgContent: [B2BSERV.0026.9106] No method viewMsgContent in class wm.PartnerMgr.xtn.admin
000018 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.admin:updateTransports: [B2BSERV.0026.9106] No method updateTransports in class wm.PartnerMgr.gateway.admin
000019 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.admin:invokeService: [B2BSERV.0026.9106] No method invokeService in class wm.PartnerMgr.gateway.admin
00001A [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:log: [B2BSERV.0026.9106] No method log in class wm.PartnerMgr.xtn.admin
00001B [B2BSERV.0028.0005] Loading SAP package
00001C [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.RFC:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.RFC
00001D [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.BAPI:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.BAPI
00001E [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.XML:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.XML
00001F [B2BSERV.0026.0002] Failure while loading service sap.bapi:encodeToFile: [B2BSERV.0026.9106] No method encodeToFile in class com.wm.pkg.sap.bapi.BusinessDocumentCoder
000020 [B2BSERV.0026.0002] Failure while loading service sap.bapi.Mapper:bapi2rfc: [B2BSERV.0026.9104] Missing class sap.bapi.Mapper
000021 [B2BSERV.0026.0002] Failure while loading service sap.bapi.Mapper:rfc2bapi: [B2BSERV.0026.9104] Missing class sap.bapi.Mapper
000022 [B2BSERV.0026.0002] Failure while loading service sap.bapi.Mapper:bapi2ale: [B2BSERV.0026.9104] Missing class sap.bapi.Mapper
000023 [B2BSERV.0026.0002] Failure while loading service sap.admin:listGatewayServices: [B2BSERV.0026.9106] No method listGatewayServices in class sap.admin
000024 [B2BSERV.0026.0002] Failure while loading service sap.bapi.Mapper:ale2bapi: [B2BSERV.0026.9104] Missing class sap.bapi.Mapper
000025 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.ALE:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.ALE
000026 [B2BSERV.0028.0005] Loading WmSamples package
000027 [B2BSERV.0028.0026] Warning: Deprecated service type (webtap) in service sample.webtap:logApp in package WmSamples
000028 [B2BSERV.0028.0005] Loading WmDB package
These errors don't stop the business connector from starting up, but the errors are not normal behaviour. When I try to start the business connector through a Windows service then I get the message "Could not start the SAP Business Connector Service on Local Computer. Error 126: The specified module could not be found".
I have a working business connector installation on a Windows 2000 server, and when I checked the error log of that installation I noticed that it had logged the same errors about the 'WmPartners' package. It on the other hand didn't have any problems loading the 'SAP' package.
I tried installing the business connector on two different systems with identical results. Has anybody been able to get the business connector to work on Windows XP?

HI,
I have no idea clearly about BC.. but ..
See the following links.. may be helpfull..
Business connector
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a8609b90-0201-0010-c6bc-a41b611c6dac
SAP Business Connector on Windows XP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92e5bd90-0201-0010-b799-dfdc27f3100a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a8424011-0d01-0010-e19d-e5bd8ca52244
If usefull .. points rewarded..
Regards
Chilla..

How do we Integratet SAP to Non-SAP Using Business Connector

Hi Experts,
I am new to SAP Business Connector !!
and what are the Forms ? for SAP Business Connector Related Postings ??
!! I have a requirement to integrate sap to non-sap with Business Connector !!
We need to Generate the SAP Data In xml Format ? and the Non-sap System can Understand Only XML Formated data.
Is there any way Business Connector Box can Pull the XML file from R/3 Application Server and store the file in the Business Connector Server. from that How do we Sent XML file to Non-sap. How do we Integrate ??
what transaction code will trigger this event ? I mean is ther any SAP Transaction Code to Integrate Business Connector?
For Eg. like in R/3 SD to FICO and MM Integration.
Please Give your Valuable Suggests..
Thanks .
Upender.

Hi,
It is not an issue, It will be a separate project :-).
The right forums for this,
Expert Forums » SAP NetWeaver » Process Integration
www.wmusers.com
Also go through the following links:
http://www.sapgenie.com/interfaces/businessconnector.htm
http://www.sapgenie.com/mysap/bus_connector.htm
/people/bla.suranyi/blog/2006/07/10/xi--sap-business-connector-integration-using-the-http-adapter
http://help.sap.com/saphelp_nw04/helpdata/en/6a/3f93404f673028e10000000a1550b0/frameset.htm
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503
https://websmp104.sap-ag.de/connectors
Thanks and Regards,
Chandra Madapati

NULL Value in SAP Business Connector (BC47_CoreFix7 )

Dear All,
I am working with SAP Business Connector and some times i get NULL value in (PROXY SERVER) in Secure Proxy (HTTPS) so i need usualy to remove it manully and save the changes.
Would you plesae help me to solve this issue either to delete automatically or to have any idea to prevent getting this NULL value.
Thanks in advance..
Message was edited by: Hassan Hakeem

Dear,
i need the answer ASAP pleasssssssssssse.
Thanks..
Message was edited by: Hassan Hakeem

SAP XI over Business connector

Similar Messages

Maybe you are looking for