SAP XI server installation

Hi all,
I want to install SAP XI Server.
Can it installed with Windows XP as OS.
Thanks in advance
Neetu

Hi neetu,
check this thread that was raised recently,
XI Installation Step-by-step procedure
Regards,
Bhavesh

Similar Messages

SAP DMS server installation Query

Guys,
I would like to share my plans on DMS server installation under DEV,Quality,prod stage and requesting you all to validate and send me any comments if I am wrong anywhere.
-        We have 1 external DMS server of (250Gb capacity)
-     We are now in realization phase, As we know that we have 3 servers namly Development, quality and production server.
-     In Development Server we do Baseline DMS customization
-     In Quality server we do Integration testing
-     There will be as external computer with harddisk capacity of 80 GB,I will Install Content server CD and make that 80GB hard disk as content server for storing the documents, create content repository and store the documents which are to be tested under both development and quality server stage(Note : we can use SAP database for both testing purpose but If we load huge data there,it will slowdown the server drastically)
-     During the production server install the DMS server (250 gb) and define the content repository config under production server and start storing all the fresh document
-     Note: Since the tested documents are stored in local PC we can avoid all the tested documents under quality stage only,once the DMS server is installaed in production server we can freshly load the documents.
-     Note: I knew I have to install twice the Content server cd(once with 80 GB local hard disk and later with External DMS server)
This is how I planned, I request you to highlight the pain areas by this method else give me the confidence of how I planned?
I appreciate for immediate solution; also how does Kpro comes into picture here.
Points will be rewarded for sure.
Regards,
Murali.S
DMS consultant

Hi Murali,
As per my understanding you want to keep a Temporary Content Server for your Dev & QA system but a full fledge 250GB Content server for Production.
This is a Good method you are following, i.e. when you go for production you will not have any junk data, you will be loading only fresh data (originals) into it.
There is nothing harm or pain in doing this, only thing is you have re-configure the Content Repository and Category in Production System (SAP).
Your Basis person has to open Production System for doing this Settings (Defining Content Repository and Content Category with Port, HTTP, etc)
Document Area to be ensured in each client at any point of time, Physical machine, IP address, Port etc.
You can maintain a Excel sheet with a following Columns:
<b>Client, Content Category, Content Repository, Document Area, Physical Machine, IP Address, Port.</b>
For Transaction OACT & OAC0.
Rest your method is fantastic.
Best Regards
Rehman
Reward Your Points If satisfied.

SAP Content server installation using apache web server under HP-UX 11i

Hello,
I installed a SAP Content Server 6.4 in HP-UX 11.11 with MaxDB 7.6.
Although Installation is finished completely I got an syxtext error when apache web server is started after completing installation as below;
kbwpdc 106: /home/dmscs/bin>./apachectl start
Syntax error on line 233 of /home/dmscs/conf/httpd.conf:
Cannot load /home/dmscs/modules/mod_sapcs2.so into server: Invalid
argument
I think apache web server doesn't know mod_sapcs2.so although it exists in the directory(/home/dmscs/module).
- Working sequence
1) Environment variables setup to compile with 64bit.
2) "configure" generation with option relevant to SAP content server
3) "make" generation
4) "make install" generation
5) Install SAP Content server 6.40
6) Install MaxDB 7.6
7) Edit httpd.conf for loading mod_sapcs2.so module and changing Listen port.
8) Start apache web server.
Do I need to configure to solve this syntext error? missing any step?
Please let me know to solution if you had experienced with the same problem.
I will wait for your response.
Thanks,
Mark Yoo.

Hi Mark,
Can i check with you how do you set your environment to compile in 64bit ? My file mod_sapcs.o apear in the libexec directory instead of mod_sapcs.so. That why my apache cannot start. It prompted Cannot load module /home/sapcs/libexec/mod_sapc.o
Regards
Kim

SAP DMS server installation

Hi all,
I am very new to DMS,seriously have no idea.I have to install SAP DMS server but have no idea from where to get the software.Can anyone help me please.
Also if any one can provide me the configuration document i will be highly thankful
Regards
Praveen

Praveen
Go to service.sap.com
Under support portal heading
Click on SAP Notes search
It wil prompt for the user name/Password
You have to give the OSS ID/Passwrd-Contact Basis consultant/client
Regards,
SVP

SAP Crystal Server installation error

while installing Crystal Server 2013 sp4 on windows 2012, I am receiving the following error at the end of the installation and after waiting around 20 minutes: "installation encountered errors"
not other clue is mentioned or error number.
after checking the log, It seems the CMS is unable to start.
I tried the following"
1- reinstall again
2- redownloading the installation package
3- disabling the windows firewall
4- installing SQL server and using it instead of the bundled SQL
5- changing the default port of the CMS during the installation
please find attached the last part of the log file
kindly help
thanks in advance

thanks a lot guys.
I reinstalled the older version (sp2) instead and it is working fine.
apparently there is an issue in the SP4
if anyone encounters the same I would be more than glad to know the resolution for it.
thanks

SAP crystal server installation

Hi All,
I tried to install crystal server trial version 2013 and during installation I got error: "suppressed reboot" which is preventing me to install.
Can someone help me please.

Digging a little further, I rhink I know why you can't find it:
In Regedit, on the left-hand side of the screen, navigate as far as Navigate through the tree to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager.
Now look for "PendingFileRenameOperations" in the values on the right-hand side of the screen.
-Dell

SAP B1 Server Installation doubt

Hi experts,
I have installed SAP B1 client,ServerTools,SDK in C Drive.And also Microsoft Visual Studio ,SQL Server in C Drive.While installing B1 Server in C Drive ,I got a message like there is not enough space to install.
So, I have tried to install in G Drive which have 50 GB free space, here also it shows the same not enough space to install message.
Is it taking C Drive automatically even it is mentioned in G Drive? or Is Visual Studio,SQL and all SAP should be in same Drive?
Thanks & Regards,
Parvatha Solai.N

Hi, How much is the free space available in C Drive. the Operating system also needs some free space, may be 20% of the total Drive allocation is the practice.
Cheers

SAP HANA Database Installation on freeware OS?

Hi Experts,
I am looking for SAP HANA DATABASE installation on Below hardware For DEMO Purpose-
Available Processor details: AMD Opteron 6272 (2 Processors) 2.10 GHz.
RAM:- 40 GB
As per SAP PAM below two OS available for SAP HANA Database installation,
1. LINUX SUSE SLES11/X86_64 64BIT
2. LINUX REDHAT EL6/X86_64 64BIT
So please guide me which OS available freeware?
Message was edited by: Nitin Shrawankar
If possible kindly Share the link.

Hi Amerjit,
PLease refer below good document it will help you.
SAP HANA Server Installation and Update Guide
How to install the HANA server software on a virtual machine
BR
AKJ

SAP WAS J2EE server installation on Windows Vista

Hi Experts,
Is there anything latest on SAP WAS J2EE server installation on Windows Vista. In SDN download section I see SAP NetWeaver 7.01 ABAP Trial Version available with Vista compatibility.
Is there SAP J2EE server also available with Vista compatibility ?
Regards,
Yomesh

> Is there anything latest on SAP WAS J2EE server installation on Windows Vista. In SDN download section I see SAP NetWeaver 7.01 ABAP Trial Version available with Vista compatibility.
>
> Is there SAP J2EE server also available with Vista compatibility ?
The problem with J2EE is the support status of the used JDK. Sun does not support 1.4.2 under Vista/Windows 2008, technically it works.
Markus

Connect SAP BO server to domain after the installation.

Hello,
I would like to ask if it is fine to connect SAP BO BI 4.x Windows host to the customer domain after the installation of SAP BO.
I was trying to find answer on this but nowhere is explicitly recommended to connect SAP BO host to domain before the installation.
My question is related to Windows AD Authentication where two conditions need to be secured:
1. Windows AD authentication only works if the CMS is run on Windows
2. These Windows machine must be joined to the appropriate AD domain
What I found till know is that you can use Windows AD Authentication only when SAP BO server is in domain.
What is concerning me is that when I start with installation of SAP BO on the server which is not connected to any domain then the installation process is taking during the installation actual hostname of the SAP BO server (e.g. boserver) automatically. There is no requirement or possibility to specify hostname or IP address manually during the installation process. And I assume that connecting SAP BO server to the domain after installation will cause that hostname will change (e.g. to boserver.domain.com).
So question is if this change will cause any issue for functionality of SAP BO application. If not could you please send me an official statement from SAP Note or any BO Documentation as I was not able to find any.
Thanks in advance for opinions and answers.
BR,
Peter

Hi Bill,
thanks for reply. I spoke with couple of my colleagues which are supporting AD and yes I can agree with you that connecting server to the customer domain after the installation of BO can bring some limitation up to Domain policy.
Best practice in order to prevent possible issues is to join server to the domain before installation.
Another possible issue can be that some customers are using own naming convention for server's hostname so joining server to the customer domain is conditioned by a change of hostname and this can cause issue with correct functioning of BO application.
Thanks again for your opinion I really appreciate it.
Wish you a nice week.
BR,
Peter

SAP Dual Server (ABAP and J2EE) local installation.

Hi,
Can someone point me to source of Dual Server - installable binary for Windows 64 bit.
I also want developer studio along with this.
Thanks in advance,
Sunil.

Sunil, as per my knowledge such a system is not support within demo versions of NetWeaver systems available on store.sap.com.
You need to be SAP customer having proper license to install it by your own.
cheers
m./

Problem in SAP Server installation with Oracle DB

Hi,
We are working in SAP Server installation with Oracle DB. After some steps in our Process it is asking for a DVD called RDBMS DVD CLIENT ORACLE. We are trying to download in Service market place. But we could not get the Correct DVD for the installation. Please help in this issue. Where do we get the DVD to continue our SAP Server installation.
We are struck with our SAP Server installation. Please consider this issue as very urgent.
thanks in advance.
Regards,
Mohankumar.G

Hello Mohan,
Please specify which installation your are doing otherwise it is difficult to provide you
the correct path.
For eg if you are doing NW04's installation then path will be
downloads->entry by application group->Installations and Upgrades->SAP NetWeaver-> SAP NETWEAVER-> SAP NETWEAVER 2004S->according to OS/DB (there is oracle client cd)select the cd.
hope it helps..
Regards,
Jafer

Issue after installa SAP Content Server

Dear friends,
I have installed a SAP Contenet Server and Cache server on a windows 2003 server with maxdb, SAP NW 7.0 SR3
Installation using sapinst finished sucessfully, I checked the url link to test see the status of content server and this owrks fine:
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo
But in the url link of cache server shows page not found:
http://hostname:1095/Cache/CSProxyCache.dll?serverInfo
I restarted SAp content server an cache server and issue persist, any idea to solve this issue?
Thanks friends!!!

Hi Kalyan,
First thanks for your answers.
1) Folders exist
2) I can´t find the port 1095 is used in "services" file but I changed the port to 1094 in the IIS and it didn't work.
3)cache website is up, also I restarted the IIS and websites.
Issue persiste only for cache sever this message appears:
The page cannot be displayed
The page you are looking for is currently unavailable. The Web site might be experiencing technical difficulties, or you may need to adjust your browser settings.
For content server show status runing.
Please your help, thanks.
Edited by: Friend on Jan 13, 2009 4:30 PM

SAP NW 7.0 AS JAVA Application Server Installation in DMZ : Win 2008 SR2

Dear Experts,
We are installing two AS JAVA application servers in DMZ (XYZ domain) and the central instance is running outside DMZ (ABC domain). While trying to give the profile path of the CI, in the application server installation, it says that the path cannot be found. We have opened the following ports 54200,54201,54204,54218,54230,3342,3641,3310,3610,8010,8011, and 25. The installation inside DMZ is run with a user which is part of local administration group. The DB (SQL 2008R2)is running on a different host in a distributed setup.
Could someone please let us know if any other port needs to be open to allow communication between the central instance and application server?
Help is appreciated.
KP

If FileSharing disabled, Firewal is open, unable to do ping test. How does the poor App server can access the Path from CI ?
Please request your network team to open firewal between CI and APP server otherwise, even if you install you might get other below access problems
1). user's in App server can't update CI
2). Jobs in App server might run as expected.
etc...

SAP DMS and Content server installation.

Hi,
I am new in DMS. i have done configuration of DMS . now i want to store document on Content server.
so how to install content server on windows server 2003.
How to connect DMS and content sever?
How to access document ?
please help.
Thanks,
Dipak.

Hi Ricardo,
1. By using T-code DC10-Document type creation:- you will create Document type first.
a. create document type
b. define status if you need.
c. Object Linking- if you want document attach to SAP object then you need to configure by using same T-codeDC10.
and please go through below link:
http://help.sap.com/printdocu/core/print46c/en/data/pdf/CADMS/CADMS.pdf
2. You want to Store document into SAP database/file system/SAP Content Server.
a. you need to decide first where you will store document.
suppose you select store into SAP Content Server then you need to select KPRO check-box in DC10. then you need to create Content repository by using OAC0 tcode an create storage Category in OACT transaction.
b. suppose you want to store into File system then you need to configure Data Carrier in DC20 T-Code.
c. if you want to store SAP Database then also you need to Content repository same like SAP content Server in OAC0 tcode and select storage type as SAP DATABASE.
and then create storage category.
if you have any query please let me know
Thanks,
Dipak.

SAP XI server installation

Similar Messages

Maybe you are looking for