SAP XI - Using the substring function.

Hi Experts,
I am having trouble using the substring function in SAP+XI. I have to consider the value from characters 6 to 19 for a target field of 25 characters. Every time I ma using the standard substring function it is giving an error Array Out of Bounds Exception.
Please tell me how to proceed.
Thanks
Aniruddha

Hi,
Above error wil come if the input string length is less than the substring length what you are trying to get..
i.e length of the input string is less than 25 characters... do some validations or pass substring as 6 and 0 ..
HTH
Rajesh

Similar Messages

  • How to use the pps function from JCOP?

    Hi
    I'm trying to use the pps function from JCTerminal (JCOP API: [url http://www.cs.ru.nl/~woj/jcopapi/com/ibm/jc/JCTerminal.html#pps(int, int)]pps function ) to connect my client to a virtual card with a specific protocol (T=0).
    But I always got the error: "Protocol and parameter selection not supported by this terminal!"
    I've tried to make an ATR that support both protocol : [url http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc]3B 90 95 80 81 1F C7 DC.
    I really don't know what value to put in the second parameter (baud rate), I've tried with 150000, which is in the range of the ATR but I'm not sure this is correct. And I could't find any example of it.
    I'm also not sure where to put the pps command, the specification say directly after a reset, so I tried this implementation:
    System.out.print("Start");
              readers = TerminalFactory.getDefault().terminals().list(State.CARD_PRESENT);
              //If no readers has a card it ends the process
              if(readers.isEmpty()){
                   System.out.println("\nNo card in the reader...");
                   return;
              System.out.println("\nReader Type: "+readers.get(0).toString());
              term = (PCSCJCTerminal)JCTerminal.getInstance("PCSC", readers.get(0).toString().substring(15));
              term.open();
              System.out.println("\nTerminal opened");
              //Getting the ATR
              atr = new ATR(term.waitForCard(2000));
              try {
                   term.pps(JCTerminal.PROTOCOL_T0, (int)150000);
              } catch (Exception e) {
                   e.printStackTrace();
              System.out.println("ATR: "+toHex(atr.getBytes()));
              //sending a data 11223344
              System.out.println("\nsending data: 11223344");
              byte[] responsesend = term.send(0,cmdsend,0,cmdsend.length);
              System.out.println("Response data is:" + toHex(responsesend));
              //close terminal
              term.close();
              System.out.println("\nTerminal closed");I've got this output on the console:
    <font size="2">StartReader Type: PC/SC terminal Virtual CAD Reader 0
    Terminal opened
    ATR: 3b 90 95 90 00 81 1f c7 cc
    sending data: 11223344
    <font color="red">Protocol and parameter selection not supported by this terminal!</font>
         at com.ibm.jc.JCTerminal.pps(Unknown Source)
         at com.test.essai.main(essai.java:46)
    </font>>
    And If I take a look at the data exchanged with the card:
    <font size="2">Running in Virtual Card mode...
    ATR: 3B909580811FC7DC
    Waiting for event (power: off, protocol: unknown/undefined)...
    Waiting for event (power: off, protocol: unknown/undefined)...
    Raw event data: 01
    Event: VCAD_EC_POWER_ON (0x01)
    Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_POWER_ON) ATR: 3b909580811fc7dc
    Raw reply data: 003b909580811fc7dc
    Sending reply...
    Waiting for event (power: on, protocol: unknown/undefined)...
    Waiting for event (power: on, protocol: unknown/undefined)...
    Raw event data: 06ff11957b
    Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: ff11957b
    Accepting any PPS request parameters: Protocol: t=1; FI=9, DI=5
    Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: ff11957b
    Raw reply data: 00ff11957b
    Sending reply...
    </font>>
    This (above) is the PPS command but not from the PPS function, it is always sent with protocol T=1
    <font size="2">Waiting for event (power: on, protocol: t=1)...
    Raw event data: 0501
    Event: VCAD_EC_SET_PROTOCOL (0x05) Protocol: t=1
    Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_SET_PROTOCOL)
    Raw reply data: 00
    Sending reply...
    Waiting for event (power: on, protocol: t=1)...
    Raw event data: 0600c10120e0
    Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 00c10120e0
    Handling protocol-specific command...
    Protocol block:
    NAD: 0x00
    PCB: 0xc1 (T1_S_BLOCK); S-Block type: T1_SBT_IFS_REQ
    LEN: 1
    INF:
    IFS: 20
    EDC: 0xe0
    Changing IFS(other) from 32 to 32
    Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 00e10120c0
    Raw reply data: 0000e10120c0
    Sending reply...
    Waiting for event (power: on, protocol: t=1)...
    Raw event data: 0600001300a404000d54657374436c69656e7441707000f0
    Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 00001300a404000d54657374436c69656e74
    41707000f0
    Processing app. command...
    App. block:
    NAD: 0x00
    PCB: 0x00 (T1_I_BLOCK); Seq. #: 0; More data: 0
    LEN: 13
    INF:
    00a404000d54657374436c69656e7441707000
    EDC: 0xf0
    cmd name: N/A (class #4)
    cmd: 00a40400 0d 54657374436c69656e74417070 70
    Responding with the reversed command data, SW is hardcoded to 90<INS>
    rsp: 707041746e65696c4374736554 90a4
    Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 00000f70704
    1746e65696c437473655490a475
    Raw reply data: 0000000f707041746e65696c437473655490a475
    Sending reply...
    Waiting for event (power: on, protocol: t=1)...
    Raw event data: 060040041122334400
    Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 0040041122334400
    Processing app. command...
    App. block:
    NAD: 0x00
    PCB: 0x40 (T1_I_BLOCK); Seq. #: 1; More data: 0
    LEN: 4
    INF:
    11223344
    EDC: 0x00
    cmd name: N/A (class #1)
    cmd: 11223344
    Responding with the reversed command data, SW is hardcoded to 90<INS>
    rsp: 9022
    Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 0040029022f
    0
    Raw reply data: 000040029022f0
    Sending reply...
    Waiting for event (power: on, protocol: t=1)...
    Raw event data: 03
    Event: VCAD_EC_POWER_OFF (0x03)
    Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_POWER_OFF)
    Raw reply data: 00
    Sending reply...
    Waiting for event (power: off, protocol: unknown/undefined)...
    </font>>
    If someone know how to use this function or have any advice to help me to select a specific protocol with Jcop API, please let me know.
    If you you need any more information don't hesitate to ask.
    Best regards
    Edited by: Cyril on Sep 22, 2011 9:54 AM

    -1
    I'm using a virtual terminal (windows driver), and I don't see how I could turn off the Auto-pps. I've also tried with a real reader and a card and I have the same error.
    -2
    I've tried value in the range of the atr (based on this analysis: [url http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc]http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc ). But I don't know if only I value of baud-rate is possible in the range. Anyway I just would like to change the protocol, not the baud-rate.
    -3
    I've already tried to call pps function before, after the first reset, or with another reset later and I always got the same thing.
              term = (PCSCJCTerminal)JCTerminal.getInstance("PCSC", readers.get(0).toString().substring(15));
              term.open();
              System.out.println("\nTerminal opened");
              //Getting the ATR
              atr = new ATR(term.waitForCard(2000));
              System.out.println("ATR: "+toHex(atr.getBytes()));
              jcard = new JCard(term,atr,0);
              jcard.reset();          
              try {
                   term.pps(JCTerminal.PROTOCOL_T0, (int)312500);
              } catch (Exception e) {
                   e.printStackTrace();
              }The same pps is always send after each reset...

  • How to use the set functions effectively in webi ,please let me know with detail

    how to use the set functions effectively in webi ,please let me know with detail

    Hi,
    we use use set functions on heirarchies with aggregate functions mostly .
    If you include member_set, Min returns the minimum value of the aggregated data for all members in the member set.
    Member_set can include multiple sets separated by semicolons (;).
    The list of member sets must be enclosed in {}.
    If the member set expression does not specify a precise member or node, the hierarchy referenced must be present in the table, then the member set expression references the current member in the hierarchy in the table. If the hierarchy is not in the table, the function returns the message #MULTIVALUE.
    Eg .
    1)     Ancestor
    =Sum([YTD] ; {Ancestor([Test Hierarchy];2)})
    2)     IsLeaf
    =[Test Hierarchy].IsLeaf
    You can use this function when you want to show your Measure only at lower level .
    3)     .Depth
    =[Test Hierarchy].Depth
    This is also function used with hierarchy to find Level of Members .
    Follow this link for PDF reference .
    Page 147
    https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&ved=0CDIQFjAB&url=https%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2Fboexir4%2Fen%2Fxi4sp5_ffc_en.pdf&ei=nBAUU-iUM4WWrAeMuoCoDg&usg=AFQjCNHakXsEjd_yUk2y3lVdibf3PXpEOA&bvm=bv.61965928,d.bmk
    search on SCN this question was discussed before also one those links .
    http://scn.sap.com/thread/3183380
    Hope this will help you .

  • How to put decimal in the substring function

    Hi Friends
    I am having a input value which is a UDF named GetValue which is mapped with a substring (0,4) which is again mapped to a split by value and then to the target field MENGE
    My problem is when value is coming from GetValue and i am mapping it to substring there i want to take the decimals also
    forexample let us value coming is 2 than in the substring and then to the target field i want to send as 2.000.
    Please help me how it can be done.
    Thanks

    Hi Aquarian,
    The value which is coming from GetValue UDF, map that to a FormatNumber Function
    Use the standard function 'formatnumber' with number format 0.00
    double click on 'formatnumber' function in mapping editor to get number format field.
    you need not put anything in the 'decimal separator' field.
    this function is available in arithmetic set of standard functions.
    I believe this should be it.
    Let me know if you need more help.
    Thanks,
    Varun

  • How to use the Table Function defined  in package in OWB?

    Hi,
    I defined a table function in a package. I am trying to use that in owb using Table function operator. But I came to know that, owb R1 supports only standalone table functions.
    Is there any other way to use the table function defined in a package. As like we create synonyms for functions, is there any other way to do this.
    I tryed to create synonyms, it is created. But it is showing compilation error. Finally I found that, we can't create synonyms for functions which are defined in packages.
    Any one can explain it, how to resolve this problem.
    Thank you,
    Regards
    Gowtham Sen.

    Hi Marcos,
    Thank you for reply.
    OWB R1 supports stand alone table functions. Here what I mean is, the table fucntion which is not inculded in any package is a stand alone table function.
    for example say sample_tbl_fn is a table function. It is defined as a function.It is a stand alone function. We call this fucntion as "samp_tbl_fn()";
    For exampe say sample_pkg is a package. say a function is defined in a package.
    then we call that function as sample_pkg.functionname(); This is not a stand alone function.
    I hope you understand it.
    owb supports stand alone functions.
    Here I would like to know, is there any other way to use the functions which are defined in package. While I am trying to use those functions (which are defined in package -- giving the name as packagename.functionname) it is throwing an error "Invalid object name."
    Here I would like know, is there any other way to use the table functions which are defined in a package.
    Thank you,
    Regards,
    Gowtham Sen.

  • How do I use the print function to output a numeric variable with a fixed amount of leading zeroes

    I need to create an output from a T-SQL query that picks a numeric variable and uses the print function to output with leading zeroes if it is less than three characters long when converted to string.  For example if the variable is 12 the output should
    be 012 and if the variable is 3 the output should be 003.
    Presently the syntax I am using is PRINT STR(@CLUSTER,3) .  But if @CLUSTER which is numeric is less than three characters I get spaces in front.
    Please help!

    >> I need to create an output from a T-SQL query .. <<
    NO! NO! In RDBMS, we have a presentation layer that handles displays. We do not ever do it in the database. This is fundamental. But more than that, the purpose of PRINT is for debugging in T-SQL and never for output.
    You are still writing 1960's COBOL or BASIC, but you want to to it in SQL.  You probably picked the wrong data type (a numeric that should be a string) and are trying to repair your design error.  
    --CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
    in Sets / Trees and Hierarchies in SQL

  • TS1398 I have an iPad mini, because of my work network firewalls I am not able to use the airprint function to print. I was told you can direct connect to a printer. I am not sure how as I have not seen any cables for a lightning connection to a printer c

    I have an iPad mini, I am connected to my work wireless connection. My printer also is on the same wireless network, however I am not able to print to my airprint enabled printer through this wireless connection. Is there a way to direct connect to the printer via a cable ?
    I am missing something here on the connection. I am thinking possibly a firewall here at work will not allow me to use the airprint function. Help ?

    There is no support for wired printing.
    It is probably a firewall issue, possibly where all inbound communications are blocked. Since you're at work, I'd call your work IT department and find out from them what you can/can't do.

  • Does anyone know how to use the bcc functionality for apple mail while accessing it on the cloud from my PC?

    I am currently away from my MAC and want to send an email through apple mail with the bcc functionality.  I am using the cloud to get to my mail, however, I can't figure out how to use the BCC functionality, please help.  Thanks!

    Open your mail,
    lower left corner click on settings,
    go to composing and check BCC, save and your done

  • How to Use the language function for assignment and validation

    Hi All,
    If anyone can explain me in details with example ,how to use the language function for assignments and validations?
    Thanks
    Arnab

    Hi Arnab,
    The expression is checked only for the current MDM session.
    If u login with the ABC language it will always show the ABC language no matter how many times u execute it.
    Try connecting to the DM with the XYZ language.
    It should go to the if part rather than else.
    Hope it helps.
    Thanks,
    Minaz

  • How to use the CMS functionality in Sun Portal Server 7.2

    Hi All,
    How to use the CMS functionality using the ccd.war(Portlet) which is available in the library as i could add it to my channel but not able to show the functionality as it is showing the error msg "You are currently not logged in. Please login." should I create userid and there respective roles inorder to use the CMS functionality.
    Has any one used this as I could this in glass fish server.
    Any Input is appreciated.
    Thanks & regards
    Srikanth

    Have a look at the "*Roles*" section of the portal server 7.2 content management system guide
    http://docs.sun.com/source/820-4275/index.html . You can also look at [project mirage|https://mirage.dev.java.net] for some screencasts
    Alternatively,
    1. ccd.war has 3 portlets in it:
    (a) custom content definition portlet
    (b) custom content portlet
    (c) workflow portlet
    2. Inorder to work with these portlets, user needs to be in anyone of the below roles:
    (a)Consumer (b) Editor (c) Approver (d) Administrator (e) Submitter (f) Contributor (g) Publisher
    3. By default ccd.war gets deployed using a default roles file (/var/opt/SUNWportal/tmp/ccd.roles.properties)
    Note: In windows, you may not find this file
    4. Access the portlets as a user in any of the role mentioned in the ccd.roles.properties
    (OR)
    you can use a new roles file which has mapping to your custom roles. For this , undeploy existing ccd.war and deploy again with a new roles.properties file
    Hope this helps!

  • How to use the divide() function in bpel

    Hi All,
    How to use the divide() function in bpel.
    pls can u give the one sample example

    2 div 4
    Eg;
    <assign name="Assign_1">
    <copy>
    <from expression="2 div 4"/>
    <to variable="outputVariable" part="payload"
    query="/client:testProcessResponse/client:result"/>
    </copy>
    </assign>
    --Prasanna                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • How do I find out what year my MacBook Pro is?  I want to know if I can use the mirroring function with my Apple TV if I download Mountain Lion.

    I'm trying to find out if I can use the mirror function to look at large construction drawings using my Apple TV.  It says that my MacBook Pro has to be early 2011 or newer and I can't remember what it is.

    Mactracker - Get Info on any Mac

  • How can I use the "EvalScript()" function? I am trying to send text to a Director app from the web browser, but the console in the browser just responds "Uncaught ReferenceError: evalScript is not defined ".

    I am trying to control a Shockwave app form another machine, using "Pusher" service (websockets), and everything is ok so far; but when I try to send the shockwave app the text recieved from another machine, using the "EvalScript()" function (as documented), I only get the message "Uncaught ReferenceError: evalScript is not defined" in the browser's console. What am I doing wrong?
    'm using the following script in the webpage where the shockwave object is located:
      <script type="text/javascript">
        // Enable pusher logging - don't include this in production
        Pusher.log = function(message) {
          if (window.console && window.console.log) {
            window.console.log(message);
        var pusher = new Pusher('abc963cf3e6g678879e');
        var channel = pusher.subscribe('Galileo_channel');
        channel.bind('Galileo_event', function(data) {
          evalScript(data.message);
      alert(data.message);
      </script>
    The "alert" is working fine, but I can't get JavaScript to recognize the EvalScript (I even tried calling the shockwave object, ie: "extev01.evalScript()", since the object's ID is extev01, but it doesn't work, either).
    Help!

    Thanks Sean.
    I tried your suggestion first, using getNetText to poll the server and read a text file. The drawbak is that I had to poll the server constantly, since I could not know in advance when the text file was going to change (and it's not practical to stump the server and connection).
    I've kept trying the EvalScript, asigning the Shockwave object to a variable first, then calling the EvalScript() in the object, but it doesn't work, either. I think I will simply use JavaScript and forget about shockwave altogether, since everything is working fine up to that point (although it would be nice to be able to use Lingo for the rest of the app).

  • Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions.  I downloaded the most recent driver! Any help would be appreciated.

    Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions.  I downloaded the most recent driver! Any help would be appreciated.

    HP says that the drivers for your all in one print/scanner are downloadable from apple. For the scanner to use preview. image capture or the scan icon from the print driver queue.  I don't know how old your HP is, but I know that the newer Os from apple don't support a lot of older printers. You might be able find a third party driver that could work.

  • Scanning in Mavericks? I can no longer use the scanning function in my HP Officejet 4500. HP says to go through Preview, Image Capture, or Print/Scan in System Prefs. Still doesn't work. Any ideas/similar experiences?

    Scanning in Mavericks? I can no longer use the scanning function in my HP Officejet 4500.
    HP says to go through Preview, Image Capture, or Print/Scan in System Prefs.
    Still doesn't work. Any ideas/similar experiences?

    Sure it is, yet it's called HP LaserJet Professional M1210nf MFP Series *
    Today, I followed your other advice, and deleted the printer, deleted the /Library/Printer/hp folder, downloaded the entire set of driver, re-installed the printer twice, once with the driver, once with Bonjour.
    The Bonjour Printer has the scan option active, but it is doesn't work (refer to above.), it is called M1217nfw
    The Apple Driver Printer doesn't show the scan option at all, it is called M1217nf (as on the http://support.apple.com/kb/HT3669#HP list.) This model number doesn't exist, as far as I can tell. 
    Still, everything works perfectly in Snow Leopard, for a MF printer that has been manufactured years after Snow Leopard was released.
    Why going up in software version means going backwards in compatiblity for brand new product is really the question that puzzles me here.

Maybe you are looking for

  • Slideshow problems on secondary monitor

    When i hook up my laptop up to a larger monitor Lightroom works fine but then when i click slideshow the large monitor just goes black and the slideshow reverts back to the laptop. Does anybody know of a way i can get the slideshow to show on the lar

  • CcBPM: can we resend the failed message from PI to R/3

    Hi All, I have  a scenario where I need to process 4 separate files in a fixed sequenec in R/3. (File-1 first, then File-2, File-3 and then File-4). These files will come to PI at same time. I understand CCBPM may be the only way to do it elegantly.

  • Adobe CS on a new iMac?

    So I purchased a new iMac and the salesperson said that since this new iMac has an intel chip, my old software, Creative Suite version 1 might not work on this new computer. The salesperson suggested I go and purchase the latest version of CS. I have

  • Name Redefined Error?

    I'm using CS 3. When I define a second Repeat Region, say working off = of Recordset2, I always seem to get a "name redefined" error on a Dim = statement. After spending countless hours trying to track down the bug, = I seem to have found a workaroun

  • Capturing with a JVC HD GY 110U, missing beginnings

    Hi There, We are working with a JVC HD GY 110U and capturing is proving to be trying, FCP and the JVC are cutting off the starts of our clips., we checked this out on the JVC site and it said the problem is resolved by upgrading the firmware of the c