SAP xi3.0 install on redhat 9.0 ...

Hi
I want to install the sap xi3.0 on redhat9.0 server. already download following s/w..
51030362.zip ( Oracle 9.2 dvd)
51030721.zip (Exports dvd)
51030723_4.zip (xi3.0)
51030723_5.zip (Xi3.0 connecter pack kit)
51030724_11.zip (j2ee)
51030763_8.zip (developer studio)
51030764_8.zip (unicode kernal oracle)
51030924_1.zip (IGS)
51031148_8.zip (install Master)
50072743_6.zip (SAP Gui 6.40)
this s/w is sufficient to install sap xi3.0 on redhat server.. actually i am new person in xi point of view..
please send the s/w list to install sap xi3.0.
thanks in advance
seshu

Hi Seshagiri
Check the following blog where Mr.Felix has spoken of installing XI3.0 not on Redhat but an alternate Linux system. But i guess the s/w req shd be the same.
/people/sap.user72/blog/2005/05/31/my-experience-with-xi-installation-on-fedora-core-3-linux
cheers
Sameer

Similar Messages

Can we configure SAP server installed in RHEL in windows sapmmc?

Can we configure SAP server installed in RHEL in windows sapmmc(Which is also sap server with same version and same DB)?
I have tried to configure using help from previous post in SCN ( SAP MMC in one server to control the entrie landscape ) but it is not working... As picture shown below after entering the details am clicking on add but nothing is happening...
Scenario is I have installed 4 VM's with SAP installed in all (out of it 3 linux and 1 windows) & all communicating well and they are in same Network/Landscape & I can configure/manage/logon all servers in host GUI... But If I shutdown my VM or a Laptop... Every time I have to start all the servers... by starting lsnrctl, DB, sap for all the servers,
Is there any chance to configure sap in windows sapmmc...???
Kindly suggest the process step by step...
Thanks in advance...

Hi Yüksel
Thank you for the reply It helped me to configure but i struck in some place.. Dispatcher is getting stopped... I tried to add 3 different sap servers in sapmmc and tried to start.. Three are getting same errors(Guess same error)
After your suggestion i was able to configure and start SIDadm of host but immediately or after 30sec Dispatcher gets stopped tried to find out some solutions but didnt worked... But i was able to start from there servers manually in linux way startsap, but not in SAPMMC way...
Could you or please help me in solving trace given below...
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno      00
sid        W41
systemid   387 (Intel x86 with Linux)
relno      7000
patchlevel 0
patchno    353
intno      20050900
make:      single threaded, Unicode, optimized
pid        22162
kernel runs with dp version 247000(ext=110000) (@(#) DPLIB-INT-VERSION-247000-UC)
length of sys_adm_ext is 576 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 22162) [dpxxdisp.c   1345]
shared lib "dw_xml.so" version 353 successfully loaded
shared lib "dw_xtc.so" version 353 successfully loaded
shared lib "dw_stl.so" version 353 successfully loaded
shared lib "dw_gui.so" version 353 successfully loaded
shared lib "dw_mdm.so" version 353 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Tue Mar 31 00:02:41 2015
*** WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0042.qqq.nxst) took 21 seconds
Tue Mar 31 00:02:52 2015
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 11 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5540]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >willsys41_W41_00                        <
DpShMCreate: sizeof(wp_adm) 17120 (1712)
DpShMCreate: sizeof(tm_adm) 4480000 (22288)
DpShMCreate: sizeof(wp_ca_adm) 28800 (96)
DpShMCreate: sizeof(appc_ca_adm) 9600 (96)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/524056/524064
DpShMCreate: sizeof(comm_adm) 524064 (1036)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (92)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (68)
DpShMCreate: sizeof(vmc_adm) 0 (1684)
DpShMCreate: sizeof(wall_adm) (38456/34360/80/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x4ed2000, size: 5141584)
DpShMCreate: allocated sys_adm at 0x4ed2000
DpShMCreate: allocated wp_adm at 0x4ed4260
DpShMCreate: allocated tm_adm_list at 0x4ed8540
DpShMCreate: allocated tm_adm at 0x4ed8570
DpShMCreate: allocated wp_ca_adm at 0x531e170
DpShMCreate: allocated appc_ca_adm at 0x53251f0
DpShMCreate: allocated comm_adm at 0x5327770
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x53a7690
DpShMCreate: allocated gw_adm at 0x53a76d0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x53a7700
DpShMCreate: allocated wall_adm at 0x53a7790
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: Parameter rdisp/queue_lock_level = 2
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use spinlock for locking
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation map
<EsMap> EsMapUnamFileMapInit: Initialize the memory 240 MB
Linux: Kernel supports shared memory disclaiming
Linux: using madvise(<pointer>, <size>, 9).
Linux: disclaiming for shared memory enabled
<ES> 239 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
Tue Mar 31 00:02:53 2015
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1752]
***LOG Q0K=> DpMsAttach, mscon ( willsys41) [dpxxdisp.c   12953]
DpStartStopMsg: send start message (myname is >willsys41_W41_00                        <)
DpStartStopMsg: start msg sent
Warning: Swap space is configured quite small with 5035 MB.
It should be two times larger than the amount of RAM (3066 MB).
See note 171356 for more information.
Warning: tmpfs at /dev/shm is configured quite small with 1532 MB!
Minimum value is 2048 MB.
Recommended size is 75 % of RAM + swap.
*** INFO Shm 13 in Pool 10    59082 KB estimated     58800 KB real (    -282 KB    -72 %)
CCMS: start to initalize 3.X shared alert area (first segment).
*** ERROR => DpWPCheck: W0 (pid 22217) died (severity=0, status=65280) [dpxxdisp.c   16083]
child (pid=22217) exited with exit code 255
my types changed after wp death/restart 0xbf --> 0xbe
*** ERROR => DpWPCheck: W1 (pid 22218) died (severity=0, status=65280) [dpxxdisp.c   16083]
child (pid=22218) exited with exit code 255
*** ERROR => DpWPCheck: W2 (pid 22219) died (severity=0, status=65280) [dpxxdisp.c   16083]
child (pid=22219) exited with exit code 255
*** ERROR => DpWPCheck: W3 (pid 22220) died (severity=0, status=65280) [dpxxdisp.c   16083]
child (pid=22220) exited with exit code 255
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:04 2015
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Mar 31 07:03:04 2015
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA    22217 Ended         no      1   0        0
1 DIA    22218 Ended         no      1   0        0
2 DIA    22219 Ended         no      1   0        0
3 DIA    22220 Ended         no      1   0        0
4 UPD    22221 Ended         no      1   0        0
5 ENQ    22222 Ended         no      1   0        0
6 BTC    22223 Ended         no      1   0        0
7 BTC    22224 Ended         no      1   0        0
8 SPO    22225 Ended         no      1   0        0
9 UP2    22226 Ended         no      1   0        0
Dispatcher Queue Statistics Tue Mar 31 07:03:04 2015
===========================
+------+--------+--------+--------+--------+--------+
| Typ |    now |   high |    max | writes | reads |
+------+--------+--------+--------+--------+--------+
| NOWP |      4 |      4 |   2000 |      4 |      0 |
+------+--------+--------+--------+--------+--------+
| DIA |      1 |      1 |   2000 |      1 |      0 |
+------+--------+--------+--------+--------+--------+
| UPD |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| ENQ |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| BTC |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| SPO |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| UP2 |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
max_rq_id 6
wake_evt_udp_now 1
wake events       total     5, udp     1 ( 20%), shm     4 ( 80%)
since last update total     5, udp     1 ( 20%), shm     4 ( 80%)
Dump of tm_adm structure: Tue Mar 31 07:03:04 2015
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks Tue Mar 31 07:03:04 2015
=============================
Slots: 300, Used: 0, Max: 0
+------+--------------+----------+-------------+
|   id | owner        |   pid    | eyecatcher |
+------+--------------+----------+-------------+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:10 2015
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >willsys41_W41_00                        < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_OFF
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect( key 57 valid )
ShmProtect( slot Index 56 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x151f000)
ShmProtect( after shmat )
ShmProtect: shmat key 57 prot 3/0 done
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect( key 57 valid )
ShmProtect( slot Index 56 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x151f000)
ShmProtect( after shmat )
ShmProtect: shmat key 57 prot 1/4096 done
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing proc (22215) (SOFT_KILL)
Stop icman
killing proc (22216) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
kill(22215,0) -> ESRCH: process died
wait for end of icman
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:11 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:12 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:13 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:14 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:15 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:16 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:17 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:18 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:19 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:20 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:21 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:23 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) -> ESRCH: process died
DpStartStopMsg: send stop message (myname is >willsys41_W41_00                        <)
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
MsIBufAlloc: allocated buffer
NiIRead: hdl 2 received data (rcd=458,pac=1,MESG_IO)
NiBufIIn: NIBUF len=458
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 458 bytes
MSG received, len 110+348, flag 4, from willsys41_W41_00    , typ 0, key FFFFFFFF00000000
DpHalt: received 348 bytes from message server
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 2 received data (rcd=214,pac=1,MESG_IO)
NiBufIIn: NIBUF len=214
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 214 bytes
MSG received, len 110+104, flag 3, from MSG_SERVER          , typ 0, key -
DpHalt: received 104 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Tue Mar 31 00:03:24 2015
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   13304]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelPSet: set events of sock 11 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelPRemove: removed last sock 11 (pos=3)
NiSelIRemove: removed hdl 2
NiICloseHandle: shutdown and close hdl 2 / sock 11
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EsCleanup destroy slot 0
<EsMap: unlink /SAP_ES_00_000
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
ShmCreate( 76, 0, 2, 0x0xcef3328 )
ShmKeyPermission( 76 ) = 0740 (octal)
ShmDelete( 13 )
cleanup event management
cleanup shared memory/semaphores
ShmCleanup SHM_SYS_ADM_KEY
ShmCleanup( 1 )
ShmCreate( 1, 0, 2, 0x0xbf99a5e8 )
ShmProtect( 1, 3 )
ShmProtect( key 1 valid )
ShmProtect( slot Index 0 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x5e1000)
ShmProtect( after shmat )
ShmProtect: shmat key 1 prot 3/0 done
ShmCreate( 1, 0, 2, -> 0x0x5e1000 )
ShmCleanup SHM_DP_ADM_KEY
ShmCleanup( 2 )
ShmCreate( 2, 0, 2, 0x0xbf99a5e8 )
ShmProtect( 2, 3 )
ShmProtect( key 2 valid )
ShmProtect( slot Index 1 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x4ed2000)
ShmProtect( after shmat )
ShmProtect: shmat key 2 prot 3/0 done
ShmCreate( 2, 0, 2, -> 0x0x4ed2000 )
ShmCleanup SHM_DP_CA_KEY
ShmCleanup( 3 )
ShmCreate( 3, 0, 2, 0x0xbf99a5e8 )
ShmProtect( 3, 3 )
ShmProtect( key 3 valid )
ShmProtect( slot Index 2 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x1655000)
ShmProtect( after shmat )
ShmProtect: shmat key 3 prot 3/0 done
ShmCreate( 3, 0, 2, -> 0x0x1655000 )
ShmCleanup SHM_PF_KEY
ShmCleanup( 4 )
ShmCreate( 4, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 4 ) = 0740 (octal)
ShmCleanup SHM_PRES_BUF
ShmCleanup( 14 )
ShmCreate( 14, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 14 ) = 0740 (octal)
ShmCleanup SHM_CALI_BUFFER
ShmCleanup( 11 )
ShmCreate( 11, 0, 2, 0x0xbf99a5e8 )
ShmGet( 10, 11, 0, 2, 0x0xbf99a52c )
ShmCleanup SHM_DB_TBUFF
ShmCleanup( 19 )
ShmCreate( 19, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 19 ) = 0740 (octal)
ShmCleanup SHM_DB_TBUFF_P
ShmCleanup( 33 )
ShmCreate( 33, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 33 ) = 0740 (octal)
ShmCleanup SHM_DB_STBUFF
ShmCleanup( 41 )
ShmCreate( 41, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 41 ) = 0740 (octal)
ShmCleanup SHM_DB_TTBUFF
ShmCleanup( 42 )
ShmCreate( 42, 0, 2, 0x0xbf99a5e8 )
ShmGet( 40, 42, 0, 2, 0x0xbf99a52c )
ShmCreate( 40, 0, 2, 0x0xbf99a1ec )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_FTBUFF
ShmCleanup( 43 )
ShmCreate( 43, 0, 2, 0x0xbf99a5e8 )
ShmGet( 40, 43, 0, 2, 0x0xbf99a52c )
ShmCreate( 40, 0, 2, 0x0xbf99a1ec )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_SNTBUFF
ShmCleanup( 45 )
ShmCreate( 45, 0, 2, 0x0xbf99a5e8 )
ShmGet( 40, 45, 0, 2, 0x0xbf99a52c )
ShmCreate( 40, 0, 2, 0x0xbf99a1ec )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_IRBUFF
ShmCleanup( 44 )
ShmCreate( 44, 0, 2, 0x0xbf99a5e8 )
ShmGet( 40, 44, 0, 2, 0x0xbf99a52c )
ShmCreate( 40, 0, 2, 0x0xbf99a1ec )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OBJ_BUFFER
ShmCleanup( 54 )
ShmCreate( 54, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 54 ) = 0740 (octal)
ShmCleanup SHM_DB_SYNC
ShmCleanup( 46 )
ShmCreate( 46, 0, 2, 0x0xbf99a5e8 )
ShmGet( 40, 46, 0, 2, 0x0xbf99a52c )
ShmCreate( 40, 0, 2, 0x0xbf99a1ec )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_CUA_BUFFER
ShmCleanup( 47 )
ShmCreate( 47, 0, 2, 0x0xbf99a5e8 )
ShmGet( 40, 47, 0, 2, 0x0xbf99a52c )
ShmCreate( 40, 0, 2, 0x0xbf99a1ec )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OTR_BUFFER
ShmCleanup( 64 )
ShmCreate( 64, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 64 ) = 0740 (octal)
ShmCleanup SHM_DB_ESM_BUFFER
ShmCleanup( 65 )
ShmCreate( 65, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 65 ) = 0740 (octal)
ShmCleanup SHM_ROLL_AREA_KEY
ShmCleanup( 9 )
ShmCreate( 9, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 9 ) = 0740 (octal)
ShmCleanup SHM_PAGING_AREA_KEY
ShmCleanup( 8 )
ShmCreate( 8, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 8 ) = 0740 (octal)
ShmCleanup SHM_ROLL_ADM_KEY
ShmCleanup( 17 )
ShmCreate( 17, 0, 2, 0x0xbf99a5e8 )
ShmGet( 10, 17, 0, 2, 0x0xbf99a52c )
ShmCleanup SHM_PAGING_ADM_KEY
ShmCleanup( 18 )
ShmCreate( 18, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 18 ) = 0740 (octal)
ShmCleanup SHM_PXA_KEY
ShmCleanup( 6 )
ShmCreate( 6, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 6 ) = 0740 (octal)
ShmCleanup SHM_ENQ_TABLE_KEY
ShmCleanup( 34 )
ShmCreate( 34, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 34 ) = 0740 (octal)
ShmCleanup SHM_ENQID_KEY
ShmCleanup( 58 )
ShmCreate( 58, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 58 ) = 0740 (octal)
ShmCleanup SHM_VB_ADM_KEY
ShmCleanup( 7 )
ShmCreate( 7, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 7 ) = 0740 (octal)
ShmCleanup SHM_ES2_ADM
ShmCleanup( 76 )
ShmCreate( 76, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 76 ) = 0740 (octal)
ShmCleanup SHM_EM_ADM
ShmCleanup( 51 )
ShmCreate( 51, 0, 2, 0x0xbf99a5e8 )
ShmProtect( 51, 3 )
ShmProtect( key 51 valid )
ShmProtect( slot Index 50 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x6e14000)
ShmProtect( after shmat )
ShmProtect: shmat key 51 prot 3/0 done
ShmCreate( 51, 0, 2, -> 0x0x6e14000 )
ShmCleanup SHM_EM2_ADM
ShmCleanup( 77 )
ShmCreate( 77, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 77 ) = 0740 (octal)
ShmCleanup SHM_EG2_ADM
ShmCleanup( 78 )
ShmCreate( 78, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 78 ) = 0740 (octal)
ShmCleanup SHM_MSBUF
ShmCleanup( 52 )
ShmCreate( 52, 0, 2, 0x0xbf99a5e8 )
ShmProtect( 52, 3 )
ShmProtect( key 52 valid )
ShmProtect( slot Index 51 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x60b000)
ShmProtect( after shmat )
ShmProtect: shmat key 52 prot 3/0 done
ShmCreate( 52, 0, 2, -> 0x0x60b000 )
ShmCleanup SHM_THRUN_ADM_KEY(th run adm)
ShmCleanup( 30 )
ShmCreate( 30, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 30 ) = 0740 (octal)
ShmCleanup SHM_JAVA
ShmCleanup( 70 )
ShmCreate( 70, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 70 ) = 0740 (octal)
ShmCleanup SHM_PF_AS_KEY(Appl.Statistics)
ShmCleanup( 56 )
ShmCreate( 56, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 56 ) = 0740 (octal)
ShmCleanup SHM_PROFILE
ShmCleanup( 57 )
ShmCreate( 57, 0, 2, 0x0xbf99a5e8 )
ShmProtect( 57, 3 )
ShmProtect( key 57 valid )
ShmProtect( slot Index 56 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x151f000)
ShmProtect( after shmat )
ShmProtect: shmat key 57 prot 3/0 done
ShmCreate( 57, 0, 2, -> 0x0x151f000 )
ShmCleanup SHM_NO_BUFFER
ShmCleanup( 48 )
ShmCreate( 48, 0, 2, 0x0xbf99a5e8 )
ShmGet( 40, 48, 0, 2, 0x0xbf99a52c )
ShmCreate( 40, 0, 2, 0x0xbf99a1ec )
ShmKeyPermission( 40 ) = 0740 (octal)
removing request queue
ShmCleanup( 31 )
ShmCreate( 31, 0, 2, 0x0xbf99a5d8 )
ShmProtect( 31, 3 )
ShmProtect( key 31 valid )
ShmProtect( slot Index 30 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x573d000)
ShmProtect( after shmat )
ShmProtect: shmat key 31 prot 3/0 done
ShmCreate( 31, 0, 2, -> 0x0x573d000 )
ShmCleanup SHM_POOL_0
ShmCleanup( 10 )
ShmCreate( 10, 0, 2, 0x0xbf99a5e8 )
ShmProtect( 10, 3 )
ShmProtect( key 10 valid )
ShmProtect( slot Index 9 )
ShmProtect( Mode: 76000000 )
ShmCreate( 10, 0, 2, -> 0x0xb3723000 )
ShmCleanup SHM_DB_POOL
ShmCleanup( 40 )
ShmCreate( 40, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_POOL_50
ShmCleanup( 50 )
ShmCreate( 50, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 50 ) = 0740 (octal)
MiCleanup:
ShmCleanup( 62 )
ShmCreate( 62, 0, 2, 0x0xbf99a5c8 )
ShmProtect( 62, 3 )
ShmProtect( key 62 valid )
ShmProtect( slot Index 61 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x8b30e000)
ShmProtect( after shmat )
ShmProtect: shmat key 62 prot 3/0 done
ShmCreate( 62, 0, 2, -> 0x0x8b30e000 )
MpiCleanup() -> 0
SemKeyPermission( 1 ) = 0740 (octal)
SemKeyPermission( 1 ) = 0740 (octal)
SemKeyPermission( 6 ) = 0740 (octal)
SemKeyPermission( 6 ) = 0740 (octal)
SemKeyPermission( 7 ) = 0740 (octal)
SemKeyPermission( 7 ) = 0740 (octal)
SemKeyPermission( 8 ) = 0740 (octal)
SemKeyPermission( 10 ) = 0740 (octal)
SemKeyPermission( 10 ) = 0740 (octal)
SemKeyPermission( 11 ) = 0740 (octal)
SemKeyPermission( 11 ) = 0740 (octal)
SemKeyPermission( 12 ) = 0740 (octal)
SemKeyPermission( 12 ) = 0740 (octal)
SemKeyPermission( 13 ) = 0740 (octal)
SemKeyPermission( 13 ) = 0740 (octal)
SemKeyPermission( 14 ) = 0740 (octal)
SemKeyPermission( 14 ) = 0740 (octal)
SemKeyPermission( 15 ) = 0740 (octal)
SemKeyPermission( 16 ) = 0740 (octal)
SemKeyPermission( 16 ) = 0740 (octal)
SemKeyPermission( 17 ) = 0740 (octal)
SemKeyPermission( 17 ) = 0740 (octal)
SemKeyPermission( 18 ) = 0740 (octal)
SemKeyPermission( 18 ) = 0740 (octal)
SemKeyPermission( 19 ) = 0740 (octal)
SemKeyPermission( 19 ) = 0740 (octal)
SemKeyPermission( 20 ) = 0740 (octal)
SemKeyPermission( 20 ) = 0740 (octal)
SemKeyPermission( 21 ) = 0740 (octal)
SemKeyPermission( 21 ) = 0740 (octal)
SemKeyPermission( 22 ) = 0740 (octal)
SemKeyPermission( 22 ) = 0740 (octal)
SemKeyPermission( 24 ) = 0740 (octal)
SemKeyPermission( 24 ) = 0740 (octal)
SemKeyPermission( 25 ) = 0740 (octal)
SemKeyPermission( 25 ) = 0740 (octal)
SemKeyPermission( 26 ) = 0740 (octal)
SemKeyPermission( 26 ) = 0740 (octal)
SemKeyPermission( 27 ) = 0740 (octal)
SemKeyPermission( 27 ) = 0740 (octal)
SemKeyPermission( 28 ) = 0740 (octal)
SemKeyPermission( 28 ) = 0740 (octal)
SemKeyPermission( 29 ) = 0740 (octal)
SemKeyPermission( 29 ) = 0740 (octal)
SemKeyPermission( 30 ) = 0740 (octal)
SemKeyPermission( 30 ) = 0740 (octal)
SemKeyPermission( 31 ) = 0740 (octal)
SemKeyPermission( 31 ) = 0740 (octal)
SemKeyPermission( 35 ) = 0740 (octal)
SemKeyPermission( 35 ) = 0740 (octal)
SemKeyPermission( 36 ) = 0740 (octal)
SemKeyPermission( 37 ) = 0740 (octal)
SemKeyPermission( 42 ) = 0740 (octal)
SemKeyPermission( 42 ) = 0740 (octal)
SemKeyPermission( 43 ) = 0740 (octal)
SemKeyPermission( 43 ) = 0740 (octal)
SemKeyPermission( 44 ) = 0740 (octal)
SemKeyPermission( 44 ) = 0740 (octal)
SemKeyPermission( 45 ) = 0740 (octal)
SemKeyPermission( 47 ) = 0740 (octal)
SemKeyPermission( 47 ) = 0740 (octal)
SemKeyPermission( 48 ) = 0740 (octal)
SemKeyPermission( 48 ) = 0740 (octal)
SemKeyPermission( 49 ) = 0740 (octal)
SemKeyPermission( 49 ) = 0740 (octal)
SemKeyPermission( 50 ) = 0740 (octal)
SemKeyPermission( 51 ) = 0740 (octal)
SemKeyPermission( 51 ) = 0740 (octal)
SemKeyPermission( 53 ) = 0740 (octal)
SemKeyPermission( 53 ) = 0740 (octal)
SemKeyPermission( 54 ) = 0740 (octal)
SemKeyPermission( 54 ) = 0740 (octal)
SemKeyPermission( 55 ) = 0740 (octal)
SemKeyPermission( 55 ) = 0740 (octal)
SemKeyPermission( 56 ) = 0740 (octal)
SemKeyPermission( 56 ) = 0740 (octal)
SemKeyPermission( 57 ) = 0740 (octal)
SemKeyPermission( 57 ) = 0740 (octal)
SemKeyPermission( 58 ) = 0740 (octal)
SemKeyPermission( 58 ) = 0740 (octal)
SemKeyPermission( 59 ) = 0740 (octal)
SemKeyPermission( 62 ) = 0740 (octal)
SemKeyPermission( 63 ) = 0740 (octal)
SemKeyPermission( 64 ) = 0740 (octal)
SemKeyPermission( 65 ) = 0740 (octal)
SemKeyPermission( 66 ) = 0740 (octal)
SemKeyPermission( 67 ) = 0740 (octal)
SemKeyPermission( 69 ) = 0740 (octal)
SemKeyPermission( 69 ) = 0740 (octal)
SemKeyPermission( 70 ) = 0740 (octal)
SemKeyPermission( 72 ) = 0740 (octal)
removing Semaphore-Management
closing connect handles (dgm + tcp)
DpDelSocketInfo: del info for socket 0 (type=2)
NiICloseHandle: shutdown and close hdl 0 / sock 8
DpDelSocketInfo: del info for socket 1 (type=1)
NiICloseHandle: shutdown and close hdl 1 / sock 9 - sock 10
***LOG Q05=> DpHalt, DPStop ( 22162) [dpxxdisp.c   11739]
*** shutdown completed - server stopped ***
Thanks in advance....
Regards,
Sundar

How to boot from external Hardisk where sap is installed

Hi friends,
I have an External Hardisk where SAP is installed in it i.e., Win 2003 on C drive & SAP on D drive.
In my laptop Win XP is there, but I am trying to boot with External Hardisk where Win 2003 is installed.
I am selecting to boot from External Hardisk where Win 2003 is installed but it shows the Win 2003 booting screen and the next moment screen becomes black.
So can anyone help me How to boot from Hardisk.
Thanks
santhosh

Hi,
You can not boot OS from USB devices in Windows.
Create the separate drive on your existing disc and install windows on that drive and use ur USB disc for installing SAP.
Hope it'll help u....

Sap is installed in windows 2003 server (Vmware) now how I can install and link ....Need Help !!

Hello All,
Main OS : Windows 8.1 Pro
Virtual OS (Vmware): Windows server 2003
SAP is installed on Windows server 2003
I am able to work with sap on Windows 2003 but the log on pad is 640. I want to install the logon pad in windows 8 ... so that I can start SAP from there..
can any one tell me how I can do that..
Thanks

Hi Khan
You can install the SAPGUI 7.30 with latest patch on windows 8. Kindly refer the links
Complete Installation SAP GUI 730 and BEx Front-End - SAP NetWeaver Business Warehouse - SCN Wiki
Regards
Ram

AcfExecute on a PC without SAP Frontend Installed

Hi,
Is it possible to use AcfExecute on a PC without SAP Frontend installed.
I have a requirement of starting a local .bat file an a Client pc. It will be triggered from a Webdynpro ABAP application.
I've set up a whitelist and everything is working fine on my development machine after activing the whitelist.
But, has anyone tried it on a PC without SAP Frontend Installed? Could that work too. By manually placing the SAPFrontendService.xml file on that target pc? Or how can it be done? Any special tweeks necessary?
Planning to test this on Monday at a Client site and if anyone could share your experiense regarding this I'd be very greatful.
Best Regards
Mikael

Hallo Mikael,
See also the following SAP Notes ...
https://service.sap.com/sap/support/notes/766191 (Active Component Framework Installation)
https://service.sap.com/sap/support/notes/1402024 (SAP Active Component Framework 7.12 - Patch Note)
Since March 2010 SAP does also provide a standalone ACF-Client-Installation on SAP Service Market Place.
Regards, Bertram

Implementing SAP Web Dispatcher in Redhat Linux Platform

Hi there,
Has anyone implemented SAP Web dispatcher in Redhat Linux Platform? Does Redhat Linux cluster support SAP Web dispatcher Installation? Appreciate your help.
Regards
Rajan S

Hi Samuel Rajan,
Could you please check this [url|http://help.sap.com/saphelp_nwce711/helpdata/en/48/8fe37933114e6fe10000000a421937/content.htm]
Under Downward Compatibility you will find the required information.
Regards,
S.Manu.

Suse11.2 SAP ERP6 INSTALL import ABAP blank screen

hi ,guys
when i used suse11.2 for sap to install erp6 ehp5 in kvm(like local install) and go to import ABAP step, the KVM suddenlly become blank screen.
ps - ls show sapinst. what is the wrong?

Dear Beny,
This issue happen for less memory.
Check running processes using below command.
ps aux | less
Check sapinst is running or not.
Show All Running Processes in Linux
Thanks & Regards,
V Srinivasan

Install linux redhat for oracle 10g2

Hi Friends,
I will install linux redhat linux 5 for oracle 10g 2. How to created correct partition of linux to match oracle 10g 2.
I install linux as server style. any advice?
Thanks
JIm

Hi JIm
It is true that for us DBA the OFA is the standard by excellence. You have also the quite good document on that gives you also a lot of examples.
http://www.ss64.com/orasyntax/ofa.html
What is a style server? Do you mean as a template server?
Please note also that if you need to do more than 1 installation you can clone your binaries from your first installation. Ideally you should patch it to he latest release and then make your clone.
1. tar your current binaries under /oracle/product/10.2.0/db_1
2. copy the tar file on the target server under /export/home/oracle and then untar it.
3. cd to new_oracle_home/oui
4. ./runInstaller -clone -silent ORACLE_HOME="<new_oracle_home>" ORACLE_HOME_NAME="<unique_home_name>"
read more on http://download.oracle.com/docs/cd/B19306_01/install.102/b15660/app_cloning.htm
You can also clone your database to other targets
1 Duplicate from source to your targets
1.1 Perform a database backup including archive log
1.2 Create an Oracle password file for the auxiliary instance
1.3 Establish Oracle Net connectivity to the auxiliary instance
1.4 Create an initialization parameter file for the auxiliary instance
1.5 Start the auxiliary instance in NOMOUNT mode
1.6 Mount or open the target database
1.7 Ensure that backups and archived redo log files are available
1.8 Allocate auxiliary channels if needed
1.9 Execute the DUPLICATE script
Hope this will help you to get the templates installed.
Cheers
Hubert
Edited by: Hub on Oct 25, 2008 1:52 PM

Whats the 'sp' in sap xi3.0

whats the 'sp' in sap xi3.0.can u please give the sp version or num.
bye
Message was edited by:
        Kenny Scott

Hi Anshul,
SP refers to the XI series of Netweaver whereas SPs refers to the PI series
SPS is Support Package Stack and
SP is service pack.
XI Service Packs
SP12
SP13
SP14
SP15
SP16
SP17
SP18
SP19
SP20
http://help.sap.com/saphelp_nw04/helpdata/en/44/f565854b7341e6e10000000a1553f6/frameset.htm
PI Support Package Stack
SPS04
SPS05
SPS06
SPS07
SPS08
SPS09
SPS10
SPS11
SPS12
SPS13
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/fb4cd3207c7063e10000000a1553f6/frameset.htm
Regards
San

Validation of SOA Suite / OSB / SAP Adapter install

We will be doing a clustered install of SOA Suite 11g, OSB and the SAP Adapter at a customer next week.
I was wondering if anyone has any validation scripts/tests that I might use to test basic functionality and connectivity after the install.
When we deployed into DEV (a single node) environment, we wrote a simple HelloWorld test. I thought I'd check here to see if anyone has something they use to validate their installs.
We will be installing SOA Suite 11gPS2, OSB 11g and the SAP Adapter (PS1) into SOA Suite. The OS is RedHat Linux 5.5.
If there is a better place for me to ask this question, please direct me there.
Thanks,
Mike

Hi,
When I checked the diagnostic logs I can see the following type of messages:
[2012-02-08T13:33:35.702+00:00] [osb_server2] [TRACE] [] [] [tid: [STUCK].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <WLS Kernel>] [ecid: 0000JLS^rAUEoI05nzk3yZ1FC_AW000002,0] [SRC_CLASS: org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor] [APP: JCA Transport Provider] [dcid: 49e003eb77940676:13e96fa:1355c9322e6:-7fd8-0000000000000002] [SRC_METHOD: basicExecuteCall] SELECT Batch_Date, Update_Flag FROM dbo.amr_temp_update
Is there any problem because of which the thread is getting stuck. Is there any parameter for the DB adapter which can be changed to fix this problem.
Thanks,
Sanjay

Problems and solutions for 9i DB R2 install on Redhat Linux AS 2.1

Installing 9iDB R2 9.2.0.1.0 on Redhat Linux Advanced Server 2.1 (aka Redhat Enterprise Linux (AS))
and applying patchset 2 (9.2.0.3.0)
This is a certified platform but I hit many problems getting the install to work. Here are the problems I hit and how I solved them.
Note: This is not intended to be a install for dummies but just an account of all my problems and how I overcame them. I spent 10 hours on this certified install (mostly looking for solutions to the problems I was having)
I had a Intel Pentium 3 with 512 Meg RAM. (test machine)
1. Install Redhat Linux
2. Install Sun JDK 1.3.1 (this is not actually required for this install. I installed it as I was planning to install 9iAS after this)
3. Install binutils-2.11.90.0.8-13 (also not required. I installed it for 9iAS)
All other components were ok on my Redhat Linux install (i.e. kernel version, glibc)
4. Create oracle user with dba group
5. Create oracle home and oracle base directories. Ensure these are owned by oracle with rwx
6. Set kernel parameters and make sure that they are initialized every startup:
I managed to locate this script in the Redhat document called
"Deploying Oracle9iTM on Red Hat Enterprise Linux AS"
create a file called oracle.sh in /etc and give it execute permissions
oracle.sh
#!/bin/bash
# configures kernel and system parameters for Oracle9i R2
# File handles
echo 65536 > /proc/sys/fs/file-max
ulimit -n 65536
# Shared memory
# The default SHMMAX value is too low and likely to cause a failure during
# database creation. SHMMAX should be equal to half of your system's physical
# RAM.
# The default is for 512 MB of RAM. Replace the default value as appropriate
# for the amount of memory in your system, i.e.,
# 512 MB : 268435456
# 1 GB : 536870912
# 2 GB : 1073741824
# 4 GB : 2147483648
echo 268435456 > /proc/sys/kernel/shmmax
# It is generally safe to leave these next two values as they are
echo 4096 > /proc/sys/kernel/shmmni
echo 2097152 > /proc/sys/kernel/shmall
# Semaphores
echo 250 32000 100 128 > /proc/sys/kernel/sem
# Sockets
echo 1024 65000 > /proc/sys/net/ipv4/ip_local_port_range
# Processes
ulimit -u 16384
----EOF---------
then...
# chmod +x /etc/oracle.sh # make executable
# . /etc/oracle.sh # apply changes now
edit /etc/rc.local to ensure this is run on startup
append to /etc/rc.local
# configure system for Oracle9i R2
bash /etc/oracle.sh
--------EOF--------------------
7. create a generic oracle environment setup script for all users to run
create the file /etc/profile.d/oracleenv.sh
be sure to change the variables to your environment (ORACLE_BASE, ORACLE_HOME and ORACLE_SID)
oracleenv.sh
# Configures the user's environment for Oracle9i R2
ORACLE_BASE=/opt/oracle
ORACLE_HOME=$ORACLE_BASE/product/9.2.0.1.0
ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
ORACLE_SID=orcl
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
PATH=$ORACLE_HOME/bin:$PATH
export ORACLE_BASE ORACLE_HOME ORA_NLS33 ORACLE_SID LD_LIBRARY_PATH PATH
----EOF---------
chmod 755 /etc/profile.d/oraclenv.sh
This file will run when a user logs in.
8. Install oracle DB
This took me quite a few attempts.
The first Install I did I received the error jre was not found. This issue seemed to be relating to the fact I was not installing on a Pentium 4. Oracle was looking for the jre in oracle.swd.jre/bin/i686 (and .../lib/i686) when some of the files were placed in i386 and java was looking in i386. This created a real mess. I had encountered a similar problem on a previous install on a different platform. I found articles of people that tried to just link the directories with symbolic links but this never worked. I tried my own version but also failed.
The solution that worked for me was to de-install, remove all the oracle directories created by the install (this part I had always done) AND also delete the file /etc/oraInstl.loc. This makes the Installer truly believe this is the first time Oracle has been installed on this box. My jre problem disappeared after that. (I don't know why it just didn't work in the first place...)
The next error I received was an ORA-03113 when creating the database (in the dbca). (It was actually at this point that I found the document from redhat as mentioned in my set 6 above) I also noticed that when running the install of the database, the default was for Oracle's SGA to use 70% of the available memory on my machine (I have 512M so that's 360M). Oracle instructed me to set shmmax to around 240M. This may be why the database creation failed as I thought the shmmax parameter needed to be larger that SGA. Anyway, I reduce the SGA to 50% and it worked.
This error may also have been caused by the kernel parameters not being set properly after a reboot so if you implementing stop 6 above. You may never get this problem, hopefully.
8. Install the universal Installer 2.2.0.18.0 (a prerequisite for installing the patchset 2)
You will need this to install the patchset 2. You can get it from metalink by searching for the bug number in the patch area. Search for bug/patch number 2878462 in patches. (37Meg for linux intel)
(Did you know that when oracle refer to a bug number, you should treat this as a patch number? General the bugs are not available for public viewing but oracle create a patch of the same number as a placeholder. So don't search for the bug in the site search or by doc id, go straight to the "patches" area and enter the bug number as a patch number, you'll have more success. - I only found that out today after struggling with metalink for the last 4 years)
9. Install the patchset 2
I downloaded patchset 2 (which will bring my DB version to 9.2.0.3.0) (220Meg). There is a special symbolic link command you'll need so make sure you remember to do this.
i.e.
$ cd $ORACLE_BASE/oui/bin/link
$ ln -s libclntsh.so.9.0 libclntsh.so
10. Migrate your database
I could not get this to work. The docs says I need at least 150M shared_pool_size and 150M Java_pool_size before running the startup migrate. As I only have 512Meg RAM (and shmmax set to 230M) I did hold much hope that this would work. I started my DB without the migrate option just to see if it would actually open with 300M in my pools. It did, so I shut it down and restarted with the migrate option. After 5 minutes of heavy processing (I still have an empty database) my server appeared to hang. I decided to restart the machine and just re-create my DB with the new patchset already applied. I delete my $ORACLE_BASE/oradata/<sid> directory and remove the entry from /etc/oratab and re-created my DB. This worked fine :)
I hope this document helps you for your install. Please drop me line if it does help and I'll endevour to write more documents like this one.
Please drop me a quick line at [email protected] even just to say "thanks".
I will include a few keywords here to help the searches find this document. (mainly the keywords I searched on and failed to find a doc like this one)
ORA-03113 ORA-3113 03113 3113 jre was not found jre not found i686 i386 i586 9iDB R2 9.2.0.1.0 9.2.0.3.0 Redhat Advanced Server 2.1 AS Enterprise Linux (AS) RH install error installation errors oui dbca problem issue
Good luck,
Tim Daniell.

The trick that worked for me was on a 2nd attempt. I installed once, let it fail with "jre was not found", de-install through the installer, delete all directories and files under $ORACLE_BASE (including $ORACLE_HOME), and also delete /etc/oraInst.loc.
I don't know why it fixes itself with this. Oracle say this is an unresolved bug 2726268 that lies in the installer. This is still unresolved by Oracle (as at 02-June-03) therefore it is not a published bug/patch. If this doesn't work, I suggest you open an iTAR and see if Oracle has any more suggestions for you.
Cheers,
Tim.

JRE 1.4.0_01 install with Redhat 7.3

After installation of the rpm-package I tried
./java -version
and the systems claims that:
Error: failed /usr/java/j2re1.4.0_01/lib/i386/client/libjvm.so, because libstdc++-libc6.1-1.so.2: cannot open shared object file: No such file or directory
Does that mean, that libstdc++-libc6.1-1.so.2 is not installed, or just that he can't find it?
(used Redhat installation with option Software-Development, without Kernel-Development).
Best regards
F.

I found out, that libstdc++....rpm is already installed on my system
and there is seemingly no bugfix from Readhat for 7.3 concerning glibc -
so it's a promblem with PATHs maybe?

Can Tuxedo6.5 install on Redhat 6.2 or 7.0 or 7.1?

I tried to install tuxedo 6.5(client) on the redhat 7.1 many times on diffirent
machine,but it return the same error as follow:
Using /usr/tuxedo as the TUXEDO base directory
\nUnloading /mnt/cdrom/linux/sw234/tuxcore/WS.Z ...
cpio: premature end of file
.. finished

Well, if you see the platforms of the Tuxedo, you con see only the Tuxedo 71 for
RedHat61
and the Tuxedo80 for RedHat62. But I saw in some solutions case the installation
the use
of the Tuxedo65 with RedHat, but using some patches for RedHat for some C libraries.
I'm trying to install the Tuxedo80 in a RedHat62 now, but I have some problems
because when I start my services i can't see them in the tmadmin utility and I
receive
lines of my UBB file instead.
I hope help.
Ronald.
"giler hu" <[email protected]> wrote:
>
I tried to install tuxedo 6.5(client) on the redhat 7.1 many times on
diffirent
machine,but it return the same error as follow:
Using /usr/tuxedo as the TUXEDO base directory
\nUnloading /mnt/cdrom/linux/sw234/tuxcore/WS.Z ...
cpio: premature end of file
... finished

Forms Server Install on Redhat Linux 7.0

I am attempting to install Forms6i/Reports6i/Graphics6i on my Linux Box.
I already have a 8.1.6 Database configured and running.
After downloading the tar file and extracting it I am having trouble with the installation of the software. The Guide refers to running the orainstal shell script in the orinstall directory. Well when I execute the script I get a Character Installer and I was expecting the Java based Gui Installer such as the one with Oracle 8i DB. I cannot get the oraviewer program to work either for I wanted to see if there were some other setting I am not executing correctly.
When I continue with the Char Installer it has trouble finding a lib called X11m.a or something (Motif related).
Does Forms 6i require Motif? If so where and how do I get it for my Linux box? Are there any work arounds for this.
Any help is greatly apprecicated.
Thanks

Hello Shawn,
Yes, you need motif libraries. You can obtain it for free from: http://www.metrolink.com/products/Motif/download.html
I installed both runtime and development packages.
Aditionally you may ned to have X-devel packages installed.
After struggling with Forms installation on my linux machine I managed to do this, but let me tell you that it's not so simple. First of all please excuse my bad English, I'm not a native speaker. Anyway that's how I did it.
I assume that you downloaded the file d2k6irelease2.tar from technet. This file includes Forms 6i rel. 2 Server and Developer.
I managed to install this on my RedHat 7.1 machine having already installed Oracle 8.1.7 database Server.
First of I created a separate user which owns Forms Server software. I set this user as belonging to the same group ("dba" in my case) as the oracle database software owner. (On my machine I have "oracle" user which owns databse server belonging to the "dba" group and "forms" user belonging also to the "dba" group). You must set your environment like this (in ".bash-profile" in my case):
-- Begin .bash_profile file
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
unset LANG
PATH=$PATH:$HOME/bin
BASH_ENV=$HOME/.bashrc
ORACLE_BASE=/oracle
ORACLE_HOME=$ORACLE_BASE/product/forms
ORACLE_SID=forms
ORACLE_AUTOREG=$ORACLE_HOME/guicommon/tk60/admin
TNS_ADMIN=$ORACLE_HOME/network/admin/tnsnames.ora
ORACLE_TERM=vt220
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
TWO_TASK=oratest
MMTK_AVIPLAYER="xanim %s &"
PATH=$PATH:$ORACLE_HOME/bin
DISPLAY=TEST_MACHINE:0.0
export ORACLE_BASE ORACLE_HOME LD_LIBRARY_PATH TWO_TASK MMTK_AVIPLAYER
export TNS_ADMIN DISPLAY ORACLE_AUTOREG ORACLE_TERM ORACLE_SID
export BASH_ENV PATH
unset USERNAME
-- End .bash_profile file
As you can see I set up ORACLE_BASE to the same ORACLE_BASE as database software ORACLE_BASE, a new ORACLE_HOME, a dummy ORACLE_SID, TWO_TASK to the sid of your 8.1.6 server instance, TNS_ADMIN pointing to a directory which I created manually before starting the installer (see below my "tnsnames.ora" file under this manually created directory), ORACLE_AUTOREG, ORACLE_TERM, DISPLAY set to your_hostname:0.0, LD_LIBRARY_PATH as seen, MMTK_AVIPLAYER is for playing ".avi' files (I didn't tried this). You may need to "chmod 775" on your $ORACLE_HOME directory from the database user account.
-- Begin "tnsnames.ora" file
ORATEST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = TEST_MACHINE)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = oratest)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
-- End "tnsnames.ora" file
I untared d2k6irelease2.tar under a subdirectory created under "forms" home directory. In "unixdoc/Server" directory you will find linux_svr.pdf instructions for installation of Forms server and under "unixdoc/Developer" you will find linux_dev.pdf instructions for Developer Server. "oraview" didn't worked for me either. GUI installer didn't worked for me either. Chnaging to orainst you may issue ./orainst command and start the installation in character mode (I did not even started an X session). I choosed default install, do not create database objects (I think you will be able to install later this objects by running some sql scripts, I didn't). And I choosed all components presented and all options and default port parameters. You will also be prompted to confirm locations of the motif libraries. I choosed http mode for forms server. Do not install Reports security feature (I've heard that it's not working, this option will be presented to you somewhere at the end of installation). After finishing you may need to edit "forms60_server" file and some other files. For example I had to change my "host_name.domain_name" (in my case was "TEST_MACHINE.(none)") to my IP address as I don't have a DNS server here.
That's what I did to test forms server:
I wanted to test my Forms server by running Apache web server (the one that is installed by default by linux). (in the documetation you will find references to the WebDB listener which as far as I know is no longer installed in release 2, so the documentation is obsolete regarding this module). For this you will have to edit /etc/httpd/conf/httpd.conf file. Look for the section "Alias" and "AliasScript". under your forms $ORACLE_HOME/orainst you will find two files "forms6iconfig.txt" and "reports6iconfig.txt". You will find there actions to be performed by you manually. in "forms6iconfig.txt" file you will find virtual mappings for physical directories. You have to put this entries in "httpd.conf" file. You must edit this file as "root". For example 'Alias /dev60temp/ "/oracle/product/forms/tools/web60/temp/"'. The exception I made was for "/dev60cgi" virtaul mapping which I've put under ScriptAlias section 'ScriptAlias /dev60cgi/ "/oracle/product/forms/tools/web60/cgi/"'.
After succesfully editing the file you will ned to restart http server:
#/etc/rc.d/init.d/httpd restart
Login again as "forms" user.
In $ORACLE_HOME directory isuue:
$./forms60_server start
This will start your forms server listener.
After that you can test your forms server running from an external machine by entering: http://ip_addres_of_linux_machine/dev60html/runform.htm
and after completing parameters you will see "text.fmx" form applet saying that Forms server is installed corectlly or directly: http://ip_addres_of_linux_machine/dev60cgi/f60cgi
You have to install Jinitiator to view the applet. It will be prompted for you to download it when accessing the above address.
To be honest I was disapointed to see that forms server is very slow. And I mean very slow.
In the end please let me excuse if I wasn't clear in some points. If you have any questions please post them on the list. I'm not an expert and I may have made mistakes, but in the same time I hope this will help you setting up forms server on your linux box.
I forgot to mention that you will probably see a message saying that "formsweb.cfg was not found" when accesing "http://..../f60cgi". If you see this you have to options: either make a symlink "forms60" in the root directory to $ORACLE_HOME/forms60 directory or add a line in your "httpd.conf" file (I put this lines the last ones):
#Include 6iserver configuration file for setting formsweb.cfg path
include "/developer_home/conf/6iserver.conf"
And in $ORACLE_HOME create a directory named "conf". In this directory create a file named "6iserver.conf" and put the following line in it:
SetEnv FORMS60_WEB_CONFIG_FILE /developer_home/forms60/server/formsweb.cfg
This will set your environment correctly and you will be able to see the test form. Don't forget to restart apache web server and forms listener.
Kindly,
Codrut Octavian Popescu

Could not create Java VM to start 8.1.7 install on RedHat Linux 9

I am trying to install 8i 8.1.7 on redhat linux 9. when I start the installer I get this error and nothing happens after it. I do have java installed on the pc. Whats the cause. I did the preinstall steps and am using the oracle account to start the installation. I got the install file from the oracle downloads site.
[oracle@localhost Disk1]$ ./runInstaller
Initializing Java Virtual Machine from ../stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/bin/jre. Please wait...
[oracle@localhost Disk1]$ /usr/local/downloads/Oracle8iLinux/Disk1/stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/lib/linux/native_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link
time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM

I found a thread that said I needed to do
export LD_ASSUME_KERNEL=2.4.1 which I did. Now the installation starts and I get
[oracle@localhost Disk1]$ ./runInstaller
Initializing Java Virtual Machine from ../stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/bin/jre. Please wait...
and then get back to the $prompt after some time and the welcome screen never comes up.
Whats wrong?

SAP xi3.0 install on redhat 9.0 ...

Similar Messages

Maybe you are looking for