/SAPAPO/LOC3 Shipping Calendar

Hi All,
we need more than one shipping calendar for one location/plant.
In transaction /SAPAPO/LOC3 it is only possible to assign one calendar.
Which possibility do we have?
Thanks a lot,
Tann

Transportation and Shipment Scheduling:
The shipping calendar of the start location to schedule the activities plan, pick/pack, and load.
Hello DB49,
usually our plants are open (for pick/pack and load) from Monday to Friday;
on the Saturday we only do the picking/packing/loading for one sold-to.
The shipping calendar is assigned to the plant in //loc3 in APO.
Therefore the shipment scheduling in APO considers only that the plant is open from Mo - Fri.
What can we do that the scheduling considers (for one sold-to) also the Saturday?
Kind Regards,
Tann

Similar Messages

  • /SAPAPO/LOC3

    Change in /SAPAPO/LOC3 -> Address tab , why the "Transportation zone" field is grey out? how to make it be editable?

    Hi Yang,
    Transportation zone is grouping of several locations and being
    used as one means of transport to ship it to multiple locations.
    If you want to use transportation zones, in the location master data,
    create a location as location type 1005 (transportation zone) or 1006
    (stock transfer point).
    After creating the location (type transportation zone or stock transfer point),
    assign the relevant location in the hierarchy master data for transportation
    zones (select Master Data > Hierarchy).
    You must also create a transportation lane that contains these transportation
    zones as destination location or source location and that has the same
    destination and source location as in the locations in the transportation zone.
    Regards
    R. Senthil Mareeswaran.

  • Shipping calendar

    Hi All
    I defined a new calendar for shipping point called H6 ( 6 working days) . This calendar is assigned to a X shipping point. When i create a sales order i see the system is proposing 7 day also for the below
    SO=> Item => Schedule lines=>Click TAB Shipping ...........we can see the dates determined for
    1)Goods issue date
    2)Loading date
    3)Material avail.date
    4)Transportation Plan. Date
    The issue is H6 Calendar is with 6 working days (7th Day.. Sunday) i,e starting from Monday to Saturday. But system is proposing dates for the above on Sunday also .
    Can anyone through light on how the Shipping calendar influence the above 4 Dates. I believe when H6(6 working days)shipping calendar is assigned  then system should consider 6 working days in a week .
    Regards
    Sri

    Hi Kapil
    Thanks for your mail
    First 2 steps i maintained correctly ...No issue
    1)IMG>>>Ent. Struct.>>>Definition >>> Logistic execution >>>Copy delete,check shipping point
    2)Logistic Execution >>> Shipping >>>Basic shipping function >>> Delivery schedule & Trans. planning >>> Maintain working hours & maintain duration
    3 rd point  i crossed check . No receiving hours are maintained in customer master's
    3) customer master >>> General data >>> Unloading point >>> Receiving hours.
    i  am  clueless on what else is influencing  these dates
    Regards
    Sri

  • Shipping calendar- Time stream change.

    Hi All,
    is it possible to make different changes in same time time stream for different location.
    For example- there is a time stream TSTREAM , which is attached to shipping calender of both location LOC1 and LOC2.
    Now if 23 january is holiday for LOC1 and not for LOC2, Can we make location specific changes in calender? Is there any way to do this? or do i need to create 2 separate time stream with one having 23rd january as holiday and another as workday and attach to each location?
    Thanks in advance!!

    Hi
    As far as I know, I think it better to go for separate Time stream or Shipping calendar for different locations. You can use the same factory calendar while only creating time stream you can directly edit the buckets in one of the time stream according to your holiday calendar for respective location.
    Thanks
    Amol

  • Shipping calendars, books and cards

    When buying calendars, books and cards, I have access only to STANDARD SHIPPING and not to EXPRESS SHIPPING. How may I have access to Express Shipping?
    A. Michaud

    Welcome to the Apple Discussions.
    According to this page
    http://www.apple.com/ca/support/photoservices/shipping_prices/
    Express shipping is not available to Canada.
    Regards
    TD

  • Delivery day at customer are changing very often

    Hello,
    In our case for customer collaboration SNC5.1, the customer can receive the products on Tuesday and friday so we have assigned the time stream calendar according to this.
    Our requirement is such that sometimes customer wants the products to be shipped only on Thursday.
    so do we need to make another time stream ca;endar and assign it to location.
    Is there any way to tackle this scenario.
    Regards,
    Vaibhav Virkud

    Hi Vaibhav
    Check the below thread, it should help you
    /SAPAPO/LOC3 Shipping Calendar
    If you are completely aware of the dates, during which customer requests on thursday.
    You can manually change the periods in your shipping calendar, the fixed check box will not allow any automatic changes to the manually changed periods
    /n/sapapo/calendar, Tab Periods
    In this way you can avoid the two calendars...
    Regards
    Vinod

  • Different transportation calendar in a transportation lane?

    The transportation calendar in the transportation lane is considered when an ATP check is done in APO (e.g. for a sales order).
    Is it possible that more than one transportation calendar (depending on different criteria, e.g. shipping point, shipping condition) can be assigned to a transportation lane?

    Hi ael9999,
    As of std functionality of maintaining this, only one calendar can be assigned.
    For location specific calendar, you can assign warehouse calendar on
    transaction /sapapo/loc3 under calendar tab.
    You can try out the below BADIs
    /SCMB/BIF_LDM_TRL002QR of enhancement spot /SCMB/BIF_LDM_TRL
    /SCMB/BIF_LDM_TRL001QR of enhancement spot /SCMB/BIF_LDM_TRL
    Regards
    R. Senthil Mareeswaran.

  • SNP with handling resource in order to forward PurchReq

    I´m using SNP, with standard situation, just a safety stock form Raw material and once Stock Level falls down of SS, system place a PurchReq, I have a problem due to during 3 weeks per year, plant is not able to receive, purchreq, so I need to place them forward till the first date available,
    I have used a handling resource but is only detected with Optimizer, the problem is that I am working with a fix lot 155000 m3 but optimizer does not respect this lot
    Could you please help me to sort out this issue?
    Thanks in advance

    Hi Rafael,
    You need to create time stream and assigned to respective plant.
    Go to /sapapo/loc3 under Calendar tab you need to assign shipping calendar/receiving calendar.
    You are done.
    Regards,
    Harshil Desai

  • Block Shipping dates from calendar to assist Inventory count

    Hi Experts,
    This is in regard with blocking 3 days for shipping. Client wants to do an inventory count (for a particular plant) and so he wants that no shipment should happen on those 3 days from the plant (in SAP also). So he wants to block those 3 days for shipping.
    However, orders can be placed on these days.
    Can you please guide me how to proceed on this? Is this related to any change in shipping calendar or factory calendar or any other setting?
    Kindly advise,
    Thanks,
    Anurag.

    Hi Rishi,
    Thanks for the help !
    Yes we use GATP, and yes we want to prevent committed date/ planned PGI date fall between these 3 days.
    I went to customizing in APO MAster data > Maintain Planning Calendar (Time Stream).
    It is maintained - working time calendar (with gaps) & interval as weeks (Mon-Fri each week).
    Could you please guide me which setting should I do do block these 3 days here? Shall I remove these days from Buckets or how?
    Kindly advise. And thanks again !
    Thanks,
    Anurag.

  • Does the SNP optimizer takes into account transportation calendars (time streams)?

    Hello,
    We're trying to limit the days when a transportation lane can be used by including a transportation calendar(time stream) to the means of transport. The receipt days on certain locations, depend on the source-target location relationship so we don't want to do this through shipping/Receipt calendars at the location Level (/SAPAPO/LOC3).
    Example:
    Source A - Target X     Receipt days ( Monday-Tuesday)
    Source A - Target Y     Receipt days (Friday-Sunday)
    Source B - Target X     Receipt days ( Monday-Wednesday)
    Source B - Target Y     Receipt days (Thursday-Friday-Saturday)    
    We've tried this in an heuristic scenario, and it works. But when we run the optimizer, it doesn't seems to take into account the transportation calendars; it just creates distribution orders every day depending on the demand at the target location.
    Does anyone knows if the optimizer run should consider transportation calendars, or this functionality is only for heuristics and/or CTM?
    Is there another recommended way to model it?
    Cesar

    Hello Ada,
    As you said, the calendar of the transportation resource overrules the transportation calendar (time stream)
    I tested after removing the transportation resourced and it now uses the transportation calendar.
    However, if a transportation lane has a lead time greater than 24 hours, we need that the system only ships on a specific day from the location source and receives the goods on the next day at the target location.
    For this example,
    Source A -  Target B;  Lead time (48 hours)
    Shipping is allowed on Monday – Receipts should be on Thursday
    if we set Monday through Thursday as working days or periods in any of both types of calendars (resource or time stream) at the means of transport, the system will plan shipments every day from Monday to Thursday, instead of only shipping on Mondays.
    Do you know if its possible to have the behavior mentioned above (shipments on Mondays, receipts on Thursdays)?
    Best regards

  • Factory calendar and  PurRec

    Factory cal for a loc (XXXX) is for Friday . When i run the SNP01 in background i get purchase reqn for thursday and not for friday . Ideally i should be getting them for each friday.. can u please help.
    thanks
    vicky

    Hello Vicky,
    For the pruchase requisition, it your location XXXX the source location or target location?
    If it is the souce location, if you want the purchase requisition only be created on Fridays, you can assing a shipping calendar to the location in /sapapo/loc3, with only Fridays as working periods.
    If it is the target location, you'll need to assign a receiveing calendar instead of shipping calendar, to make sure the receipts are only on Fridays.
    Best Regards,
    Ada
    Edited by: Ada Lv on Aug 19, 2011 4:39 PM

  • Influence /SAPAPO/SJKTST04  for sales order

    Dear SAP Gurus,
    We are using report /SAPAPO/SJKTST04 to generate sales orders in simulation version but we would like to disconsider ou consider a different shipping calendar in the location master. Our shipping calendar is blocked until the 6th day of the month but we would like to have the sales orders created since 1st day.
    We could influence the DP release to SNP using the BADI /SAPAPO/SDP_RELDATA.
    Do you know if is possible to influence the calendar of the sales order creation using report /SAPAPO/SJKTST04?
    Thanks
    Mauricio

    Hi,
    but the queue is found in the ecc and it caused to stopped executing the daily extraction queue for sales order?
    thanks

  • Use of Calendar in Days Supply Calculation in APO

    The Days Supply is R/3 is defined as - The range of coverage is then the number of workdays between todayu2019s date and the date of the requirement that causes the shortage minus one day
    The Days of Supply in APO defined as - The days' supply tells the planner how many calendar days the receipts and stocks will cover the current requirements for.
    In our case we have a factory defined in R/3 as 5 days working, so R/3 display Days Supply it displays only number of Working days till stock/receipt last while APO displays number of Calendar Days ( including non working days)
    Is there any way..i can make these 2 number same in R/3 and APO. Both System has same configuration for considering stock, receipt 7 requirement elements.
    Thanks in advance !!!

    Hi,
    Normally APO should consider the working days.
    could you check that the macro "Determine workdays" is properly executed; and that "Days' supply " is based on the workdays key figure.
    Please note that by default the relevant calendar is the shipping calendar; please ensure that it is maintained in the location master.
    If you want to based it on another calendar, you need to adapt the macro.
    Thanks and Regards
    Julien

  • /SAPAPO/SYSDIR - Entry not found for Logical System

    Hi Guys...
    I have upgraded a new SCM 5.0 box from a database copy of APO Production. Ran the BDLS to convert the logical system pointing to Quality box. The challenge I am facing is to define a Distribution Definition in SPRO for Planned Independent Requirements. One of the values required in the Publication Definition is 'Logical System'. I need to point this APO Quality system to R/3 Quality system.
    Since this happened to be an upgrade from an APO production database, this does not have the R/3 Quality system in the list of Logical Systems when I do the drop down. All it has is the logical system name of the APO Quality System (Self) and R/3 Production System.
    When I create a new entry by manually entering the logical system name of R/3 Quality System, it says no entry found in /SAPAPO/SYSDIR. My question is, how do I populate this directory with the logical system name of R/3 Quality system? Your answer at the earliest will be highly appreciated with correct points.
    Thank you.

    Location in APO is nothing bu the Plant Master Data ( Or Vendor Master, Customer etc)
    Goto Transaction- /sapapo/loc3 to view both the plants JNa and JWA
    I think that you would have to define the integration mdoels which define what data( MASTER and TRNSACTIONAL) has to flow from R3 and APO and vice versa.
    Contact your APO Functional Team to set these up for the new logical system(SCM Quality) in the transactions- CFM1 and CFM2 and define the data which has to flow between the systems ( R3 and APO)
    For your 2 locations:
    Follow these steps in the meanwhile with the help of APO Functional Guy
    (1) Define the CONNECTIVITY steps which I have mentioned in the previous reply in R3 Quality
    (2)Goto transaction- CFM1
    Enter a model name- LOC( Any Name)
    Enter a logical system- SCM Quality
    APO Application- Lo(Any NAme)
    Select PLants check box and
    IN the right hand side- General selection options input the 2 locations- JNA and JWA in the Plant Field
    Save this and execute and then save it.
    (3) Goto CFM2 and automatically you should see the same model as you deifned in CFM1.
    Execute this.
    The above steps make sure that the Location( Or PLant) master data is sent over to APO Quality.
    Now the source system should have been changed on the location masters in APO.
    Hopefully this should resolve the issue and you will be able to enter a publication type for your locations- JNA and JNW
    There are many other steps which you need to do apart from these for your entire setup.
    Good Luck with this problem
    Regards
    Kumar

  • Difference between calendar used in capacity profile & factory calendar?

    Hello experts
    I am trying to check available capacities in planning book & found some ambiguities.
    In /SAPAPO/RES01, factory calendar maintained in the resource is say Z1, but in the same page, the capacity profile tab uses a different calendar.Say in Z1, if X/X/XXXX is a working day, the one present inside capacity profile considers it as a holiday & the  available capacity doesn't reflect in planning book.
    In ECC, the plant where this work center is defined follows calendar Z1.
    So my doubt is which calendar the capacity profile follows & how to ensure that it follows the same factory calendar Z1?
    Regards
    Soum

    Hello Soumyajit,
    few things you can check,
    Plant and work center calender assignment should be same, Plant has precedent over WC
    Check if in CFC9 you have correct change transfer mode set for resource.
    Once calender updated in ECC, use program RSIMPCUST to rebuild the tables for factory calendars in APO and then run /SAPAPO/CRES_CREATE_LC_RES to extend the resource in LC
    also run /SAPAPO/TIMESTREAM_UPDATE for any time stream update.
    This will update capacity profile as well resource capacity in planning book/ planning board.
    Hope this info will help you,
    Thanks,
    Rajiv

Maybe you are looking for