/SAPAPO/OM102 and return code 40.050

Hi Experts,
Please help me regarding the error message in interactive demand planning screen Error for COM routine using application program message "/SAPAPO/OM102 and return code 40.050 "
Thanks
Sree

Hi Sree,
You can check out the details of OM102 error messages in transaction /SAPAPO/OM10 by specifying the return code.
For your error the detailed message says:
Relation does not exist
Message no. /SAPAPO/OM_TS050
Diagnosis
A function module was opened with a relation that does not exist in liveCache.
Procedure
Open an SAP Support message as described in SAP Note 167280.
I suggest you do as the message suggests and open an OSS message for it. It doesn't seem like an error you can resolve with a simple consistency check run.

Similar Messages

DDIC ACTIVATION ERRORS and RETURN CODE in SAPA700VT1.LBP During Prepare

Hi Gurus,
For The Error mesage During prepare
Restart logs of DB conversions found
n Outstanding DB conversions found
We refer the Upgrade Guide & followed the steps thro SE14 Choose >DB Requests> Terminated .
Nothing found.
Then we Edit the Table found in error log ( CONV ENTRY TBATG INDX/BIC/FZLDEL_C11 0600CREB 200710032STEAM) . & by mistekan used the option Extras > Force conversion.
Now table TABTG is missing in from DATA Base & we are facing the Error
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA700VT1.LBP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "12"
Again when we check SE14 Choose >DB Requests> Terminated it shows one Entry TBATG but is not exist now
Help me

Hi,
Did you checked SM13 or SMQ1? that´s the probable cause for that error, now you should open an OSS note or start all over again.

CHECK OF UPDATE TASK Errors and RETURN CODE in RSVBCHCK.MX1

hi ia m getting this error during the upgrade .i did checked in sm12 for any failed updates but there arent any .so i think there should be a table that i need to alter.should this be done in se16 ? and i think the table name is TRAN.LBWG any ideas.
CHECK OF UPDATE TASK Errors and RETURN CODE in RSVBCHCK.MX1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long tex
Long text:
    Cause
      Changing the extract structure &V#& for application &V#& is not
      permitted, because the restructure table &V#& for the extractor still
      contains data in &V#&.
      You cannot change the structure in this status, because when you load
      an InfoPackage from BW, this leads to errors.
    What to do
      <DS:TRAN.LBWG>Delete</> the entries for all restructure tables for
      application &V#&.
1 ETH010XRSVBCHCK: Check of open update requests
A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long tex
t" ""MC02M_0HDRSETUP""100"
A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long tex
t" ""MC02M_0ITMSETUP""100"
A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long tex
t" ""MC02M_0SCLSETUP""100"
A2EEMCEX 141 Struct. appl. "03" cannot be changed due to setup table -> Long tex
t" ""MC03BF0SETUP""100"
A2EEMCEX 141 Struct. appl. "03" cannot be changed due to setup table -> Long tex
t" ""MC03BX0SETUP""100"
A2EEMCEX 141 Struct. appl. "03" cannot be changed due to setup table -> Long tex
t" ""MC03UM0SETUP""100"
A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long tex
t" ""MC11VA0HDRSETUP""100"
A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long tex
t" ""MC11VA0ITMSETUP""100"
A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long tex
t" ""MC11VA0STHSETUP""100"
A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long tex
t" ""MC11V_0SSLSETUP""100"
A2EEMCEX 141 Struct. appl. "13" cannot be changed due to setup table -> Long tex
t" ""MC13VD0ITMSETUP""100"
4 EPU202XEND OF SECTION BEING ANALYZED

1. Call transaction SMQ1 and check whether all queues in all clients (client = '', queue name 'MCEX') have been processed. To process the queues, start the collective run report for each application in the displayed clients. If you no longer need the data in the BW system, deactivate the relevant extraction queues and DataSource in the LO cockpit (transaction LBWE) and delete the queue entries in transaction SMQ1.
2. If you use the V3 update that is not serialized (usually only for application 03): Start collective run report RMBWV303. Then check the update orders in transaction SM13. If there are incorrect update orders in transaction SM13, correct the orders and then start the collective run report again. If you no longer require the update orders, you can delete them. There may be inconsistencies between tables VBMOD and VBHDR. For further information about this, see Notes 652310 and 67014.
3. Before the upgrade, delete the contents of the setup tables. Execute report RMCEX_SETUP_ENTRIES to find out which setup tables still contain entries. You can use transaction LBWG to delete the contents of the setup tables for all clients.
Unfortunately the check that the system carries out during the upgrade or when you import a Support Package does not display all affected applications. Therefore, Note 1083709 provides a check report that you can use to determine all affected applications and tables or queues.

DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG730

Hi there,
We are doing an upgrade from 3.5 BI to 7.3, we ran into an error during the MAIN_SHDRUN/ACT_UPG phase. The Error (show below)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG730.MIT
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1EEDO519 "Table" "/BIC/CZZI_DS_INT" could not be activated
1 ETP111 exit code
Does anyone came know how resolve this error ? Please advice
Many Thanks
Jacob

Hi Jacob,
In order to resolve this issue you have to unlock the shadow system and activate the table.
Procedure for unlocking shadow system
go to you bin directory (i.e) /usr/sap/SID/upg/abap/bin
./SAPup unlockshd SID
After unlocking login to shadow system client 000 and fix the above errros.
Remember to lock the shadow system before repeating the phase again.
Locking Shadow system : go to bin directoty and issue the command ./SAPup unlockshd SID
Regards,
Ershad Ahmed.

SY - System fields and return codes in ABAP

Hi
I'm new to ABAP, where do I find what the meaning of the system field return codes are ?
example SY-SUBRC returns a number of codes 0, 2, 4, 8 etc what do they mean.
Is there a resource somewhere that provides this information for all the system fields.
I have searched high and low and have found little, they must be defined somwhere ?
cheers Hugh

Here is a listing of all of the system fields.
http://help.sap.com/saphelp_scm50/helpdata/en/7b/fb96c8882811d295a90000e8353423/frameset.htm
As for what the return codes( 0, 4, 8) for SY-SUBRC mean, that is a little tricky. The meanings of the values are dependent on what statement was used previously. They would mean different things when used with different statements. For example, if you check SY-SUBRC after a FIND statement, the return code value 4, would mean something different than if you had check the SY-SUBRC value after doing an OPEN DATASET. So you need to look at the specific statements in help.sap.com and see what it says about the SY-SUBRC values for each statement.
http://help.sap.com/saphelp_scm50/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
Regards,
Rich Heilman

SCCM 2012 application run Powershell script and return codes

Hi,
I created an new application (imported as MSI) in SCCM 2012R2. After import I changed the deployment type installation program to run a Powershell script: powershell.exe -ExecutionPolicy Unrestricted -File "Install FactSet 2013 5I.ps1
My goal is to close some processes before installing the MSI. This works. But on a failure the application program also return code 0 (AppEnforce.log). Is it possible to pass the MSI return codes to SCCM.
Maybe anyone had the same or idea's to solve this? Thanks in advance.
Regards,
Peter
Powershell script code:
$ExitCode=0
Function
Stop-RunningApplication{
Param(
[parameter(Mandatory
=$true)]
[string]$ProcessName#
Specify process names separated by commas
# Split multiple processes on a comma and join with the regex operator '|' to perform "or" match against
multiple applications
$processName=$processName-split(",")
-join("|")
$process=Get-Process|Where{
$_.ProcessName
-match$processName}
|Stop-Process-Force
#Stop running processes
Stop-RunningApplication
-ProcessName"excel,outlook,fdsw32,marquee,POWERPNT,WINWORD"
#Install FactSet 2013 5I
$ExitCode
=(Start-Process".\FactSet_Setup_2013_5I_x644.msi"'/qn
FACTSET_CLOSE_PROCESSES=1 /l*v C:\Temp\InstFac20135I.log'-Wait-Passthru).ExitCode
Environment]::Exit($ExitCode)
Peter vd Bosch

It's really hard to tell from the code above because of the way it's listed, but are sure that even executes? I see at least one stray curly brace and a stray square bracket.
For the Start-Process cmdlet, have you tried without the -passthru parameter?
Also, using the actual parameters will make the code much more readable instead of relying on position.
Jason | http://blog.configmgrftw.com | @jasonsandys

Throws Exception in main and return code for JVM

Hello,
Could someone tell me what the following statement :
public class Foo {
public static void main(java.lang.String[] args) throws Exception {
// Some source code
is supposed to do with the return code of the VM when the Exception is thrown.
I mean what num�ric value is supposed to return the following instruction :
java -classpath ... com.app.Foo
Because my Java program is run in a script shell which is supposed to get a return code which as to be interpreted.
Off course I am not allowed to do the test myself because this script shell is executed on a production server ...

I don't know what the return code will be, but you could do this:
public static void main(String[] args)
try
    // ...Run the program here...
catch (Exception e)
    // Print the stack trace
    e.printStackTrace();
    // Exit with an error code
    System.exit(10);
}Jesper

Error /SAPAPO/OM102, return code 40,015 in APO DP

I am using APO DP V5.
In interactive DP, we are getting error /SAPAPO/OM102 with return code 40,015.
Had anyone had experience of this?
Thanks,
Bob Austin, Atos Origin.

Hello,
As per my understanding of your qurery...
You are accessing intractie Demand planning
that time you are getting error.
/SAPAPO/OM102 Return code 40015
With the above understanding ... I am trying to reply your query as
When I tried to execute transaction /SAPAPO/OM10 - Display Meaning of Return Code
And entered return code 40015
I received Display messages as "Date is before start date of time buckets profile"
ON long text it is "Date is before start date of time buckets profile
Message no. /SAPAPO/OM_TS015
Diagnosis
The date lies before the start date of the time buckets profile used.
This problem is due to an error in the application.
Procedure
Open an OSS message in accordance with SAP Note 167280.
Please check the details above.
In Intractive demand planning what type of work you were doing during this error occured?

Return code and handle

Back to basics! but I do not have clear idea of what the "Return Code" and "Handle" are? I have a small VI that I want to incorporate into another VI. WHat role these two terms play such case?
Thanks

Sorry about ot being clear about my issue. I have a Trigger Enable VI that someone (in fact, a company whose DAQ card we use for our experiements) wrote for us. The VI, when corrently incorporated into the main VI (which performs data acquisition and analysis) will trigger the acquisition system at right instant and gather data for next 1/10 sec. The main VI controls the DAQ card installed in our computer. It takes two signals (f=25KHz) as inputs from 2 photo detectors. The card can take the ramp output (f=10Hz, Amp=1Vpp) from an external signal generator and should begin DAQ and processing when the ramp signal reaches its peak (+0.5V) and continue taking data until it reaches trough (-0.5V), i.e. 5000 samples in one cycle of trigger signal.
Now, the main VI has multiple Sub-VI's and one of them configures the card for input signal levels, trigger levels, etc. This sub-VI also has a couple of sub-VIs regarding the extermal triggering. Since I figured that the Trigger Enable VI will have to be placed inside this VI, I was looking at the block diagram of the Trigger Enable VI and the two outputs it has are "Handle Out" and "Return Code". I am not sure what they are/mean hence the post.
Thank you

ECC 6 Upgrade Error : RETURN CODE in RSVBCHCK.DV2

Dear all,
We are doing an upgrade from 4.6c to ECC6.0, we have faced the below error (warnings) in the CHECKS.LOG file.
A2EEMCEX 151 Entries for application "03" still exist in the extraction queue ->
Long text:
    Cause
      You are not allowed to change the extract structure &V#& for
      application "03". This is because unprocessed entries are still present
      in an extraction queue of application "03" for at least one client.
      If an extraction structure is changed for which there are still open
      entries in an extraction queue, these entries can no longer be read and
      the collective update terminates.
    What to do
      Start the collective update using the "Job-Control" function in the
      <DS:TRAN.LBWE>Logistics Extract Structure Customizing Cockpit</>.
      You can get an overview of logistic extraction queues in the
      <DS:TRAN.LBWQ>Log. Queue Overview</>.
A2EEMCEX 141 Struct. Appl. "03" cannot changed because restruct. -> Long text" ""MC03BF0SETUP""300"
Long text:
    Cause
      Changing the extract structure &V#& for application "03" is not
      permitted, because the restructure table &V#& for the extractor still
      contains data in &V#&.
      You cannot change the structure in this status, because when you load
      an InfoPackage from BW, this leads to errors.
    What to do
      <DS:TRAN.LBWG>Delete</> the entries for all restructure tables for
      application "03".
A2EEMCEX 141 Struct. Appl. "04" cannot changed because restruct. -> Long text" ""MC04P_0ARBSETUP""300"
Long text: see above
A2EEMCEX 141 Struct. Appl. "04" cannot changed because restruct. -> Long text" ""MC04P_0COMSETUP""300"
Re: Upgrade Question: SMQ1 Queues and an Error during JOB_RSVBCHCK2 &
CHECK OF UPDATE TASK Errors and RETURN CODE in RSVBCHCK.MX1
Where in we they have advised to delete the structure in LBWG.
Here we don't have a BW team, but if I delete that will it lose any data? or how do I tackle this problem
Pl advise
If I am write this is used by vertex
Regards
Senthil

Those extract structures can be "rebuilt" using the transaction SBIW. They are needed if you initially fill the data into BI/BW or if you must re-load everything. It's safe to delete them.
Markus

Buffer table pool performance with return code 64 in ST05

Hey guys,I had been meeting an issue causing poor Performance in my SAP system.For a full buffered table,I did trace it with ST12 and ST05,I found it's perfectly buffered in AS(as blue background entries in ST05 tracelist),but there were entries with high 'duration' and return code '64'(I know that's mean no records found),instead,the return code '0' entries worked fine,the duration was pretty low.I had learned from documents of IBM/SAP(we're running with DB2 on AIX) that if you are just checking the exists of some records of certain table(access frequently),you may buffer them in AS,for now it seems to be going into opposite direction,that does make sense with long time 'duration'.Detailed information seen the attachments.

Hi Yunze,
this performance issue can be resolved by adding 2 more steps in the code
step 1 is required so that we will not loose any data else you can go ahead with yourcode by adding the field TZONE for both sort and delete adjacent duplicates and step 2.
1. Pass the data from table IT_TZONE into a dummy table
SORT dummy table using TZONE and DELETE ADJACENT DUPLICATES from dummy table using the field TZONE.
2. Check the dummy table is initial or not before the select query on ZTMT102.
If this is not empty then process the select query else skip the select query.
you did not mention whether the field ZTRZONE is key field in the table ZTMY102 or not.
if it is not a key field, if huge amount of data has to be fetched then create an index.
the index will create a load on the database but it will improve the performance of the select query.
Hope this will help you to resolve your issue and let me know in case of any questions.
Regards,
Phani

Return Code for scenario execution

When we execute an interface,package or scenario.
We can go in execution tab and see the start time , end time and Return code which has values like 0,7000,1722,1777 etc.
This value is fetched from odi system table :-snp_sess_task_log.
This table contains the log status for an execution . it contains start time, end time ,status code and all.
My problem is that i want to know which table stores the status code that table snp_sess_task_log picks from.
I mean is there any master table containing all the error codes/status codes that can occur in a scenario execution?

I mean is there any master table containing all the
error codes/status codes that can occur in a scenario
execution?The code and the message come from the RDBMS...
But they are stocked on a table after raising.
Try this on your work rep connexion:
SELECT *
FROM SNP_STEP_LOG L, SNP_SESS_STEP SS,SNP_SESSION S,SNP_EXP_TXT X
WHERE
L.SESS_NO = SS.SESS_NO AND
L.NNO = SS.NNO AND
S.SESS_NO = L.SESS_NO AND
STEP_STATUS = 'E' AND
L.I_TXT_STEP_MESS=X.I_TXT

Return code 35.

I have questions about patch cluster installation in solaris8.
When I install patch cluster, I got message "Return code 35". What does it mean?

return code 2 indicates that the patch is already installed, return code 35 indicates that a later version of the patch is installed.
If you for example want to install patch 112233-11 patchadd would return with return code 2 if patch 112233-11 was already installed, and return code 35 if patch 112233-12 or later was installed.

Operating System request Import return code has different return code from SAP SE01 log screen.

Hi experts.
I sent request from DEV system to PRD system at OS level but I am facing interesting problem. I sent request at OS level and return code 8, that means with error but if we look same request transporter log at SAP side vi tranzaction SE01, Transporter log show me no error. I did not test with return code 0(zero), 4 or 12 at OS level.
Our OS is SOLARIS 11.2 and Database Oracle 11G and SAP Netweaver 7.40.
Thank for help.

Read what you have posted:
Alternatively, you can find these logs in the following files in the
log directory of your transport directory (usually:
/usr/sap/trans/log):
- tp Step 6: P<YY><MM><DD>.<SID>
- tp Step N: N<YY><MM><DD>.<SID>
- tp Step S: DS<YY><MM><DD>.<SID>
Sort the files by date and check the latest one.
Markus

Index failed for Docs and PDF files with return code 8002

Hi All,
I try to index Word documents in a webdav folder in KM. When I add a text document the Indexing completes correctly and I can find the document via the search. When I add a Word Document or PDF to the folder and reindex I get the message Index failed with return code 8002.
How can I solve this Problem.
Kind Regards,
Richard Middelburg

Hi,
I have changed the host already from localhost into the hostname of the linux server. I tried this also with the FQDN of the server. I have entered the following entry
Hostname linux = sap12
In the URL generator service = http://sap12
Must I restart the portal?
Richard

/SAPAPO/OM102 and return code 40.050

Similar Messages

Maybe you are looking for