SAPBEX VBA - I need the technical name of my workbook

Hello everybody,
I have to solve the following problem:
My task is to open an existing workbook (BE Analyzer) and paste a picture depending on the technical name of the workbook. I have already programed the the download of the picture, but I still need the technical name of the workbook I actual opened. I want to export this parameter with VBA and the help of RFC to my ABAP program on server. I think I have to use the package sapbex.xla, because this package know the technical name. Is it possible to link my module and the modules of the package sapbex.xla?
I hope somebody is able to help me!
Paul

Ok, I found a solution...

Similar Messages

  • The technical name of object QVIW zabcd is not valid

    Hello Gurus
    I am facing a weird problem.
    I run a query it works fine but when I try to save the view by right click -- save view it ask me for the Description and Technical name after putting this information I press save. Istead of saving it it gives me error "The technical name of object QVIW zabcd is not valid"
    Please help me asap
    Our system is on SP18 both for abap and Java

    Hi Bala Duwuri,
    Thanks for the input...
    Can you please give me your valuable inputs on this ........
    I have a standalone custom web dynpro application which needs to be linked to standard team viewer application.
    What I want is I should be able to select the employee from the Team Viewer iView and supply the information to the Custom Application so that it gives me output based on that.
    Right now am following the below link But in that no where they were talking about the webdynpro eventing.
    then how come two views will get linked fucntionally so that team viewer will pass the information to my custom WD application??????????????????? Please help
    Please give me a clear view on how to integrate the team viewer application with custom development WD application.
    If code is required pls provide that also.............
    I would appreciate the useful inputs with higher points.
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/how%2bto%2bread%2binformation%2bfrom%2bthe%2bteamviewer%2bin%2bweb%2bdynpro
    Thanks in Advance,
    Dharani

  • I have to give the technical names to abaper for following fields to be pri

    I have to give the technical names to abaper for following fields to be printed in the GRN print out
    what r the table & field names for following
    Buyer's name
      Project Number / Cost Center
      Suppliers Delivery Note Number
      Quantity Remaining (per Material)
    like this way it is to be add in GRN print out

    this details u can get in MKPF and Mseg tables
    Go to se16
    put the table name and put the material document number
    u will get the entries
    dobul click on the entrie
    and find the data u need and the field name
    for ex Suppliers Delivery Note Number
    Reference field name XBLNR
    hope this helps
    Reward if usefull

  • How to know the technical name of psa

    hi BW gurus,
    I need to delete data from psa i need to increase the free space.  so how to know the technical name of psa.  and how to delete the data from psa.
    Thanks in advance

    Shahid,
    Agree with Tarun on this...
    Check the PSA technical name from the delete PSA option on the PSA screen of the AWB...the PSA name would be /bic/b000*...
    Shahid...also chek the table RSTSODS in SE11.
    U can find the PSA technical name in the field ODSNAME_TECH..
    Just enter the name of the PSA in the ODSNAME field..the PSA name would be
    your infosource followed by some extension.
    Deleting the data from the PSA:
    Shahid,
    this can be achieved via a program and also via the standard procedure of going to the PSA in the AWB and choosing the option delete the PSA data...
    Here select the requests which are older than any number of days or before any date..
    Hope this helps...
    Regs.
    Nick.
    Message was edited by:
            Nick

  • Display the technical name of the last level of the hierarchy

    Hello,
    I have a report with hierarchy. Each level of the hierarchy uses different infoObject. I want the report to display the technical name only for nodes from specific infoObject. For example if the infoObject uses 0cust_grp1 (for the first level), 0cust_grp2 (for the second level), 0cust_grp3 (for the third level) and 0customer (for the last level) and I want to show the technical name only for the 0customer infoObject. I know how to do it in WAD reports. Is there a way of doing it in the Query Designer?
    Please Advice,
    David

    David,
          Check the below possibilities.
    1. You can do that in a workbook.
    2. Create a copy of the same hierarchy and for the 0CUSTOMER object and nodes give tech names as text also.

  • How to Rename the technical name and description of an infocube?

    Hi,
    How to Rename the technical name and description of an infocube?
    Thanx in advance,
    Ravi.

    Ravi,
    You cant change the Technical name of the cube but you can change the description of the Cube. If you want to have a Cube with the same properties and with different Techname and Description better you do copy from the base cube and rename as per your requirement.
    Regards,
    Gattu.

  • Can we remove the Technical name appearing in the standard SAP BI Pop-Up.

    Hi,
    Can we remove the Technical name appearing in the standard SAP BI Pop-Up Varaiable Screen(Selection Screen)-When we create Variable screen for BI Reporting we should specify the technical name and create it,where it appears in the Pop-Up screen within the brackets,can technical name  be removed ?
    Please help me out to solve this issue.
    Thanks,
    Preethi

    Hi,
    As per my logic, one can change description of all bi objects which includes text Input variables also.
    If possbile be more specific what u want to change in Pop
    Regards,
    Sachinkumar.

  • Is It  POSSIBLE to change the Technical Name of Z-version Query

    Hi  Friends ,
    I was changed all quereis and cube from standard version to Z version.
    For queries, by using rszc , i was changed to Zversion,Now again is it
    possible to change the Technical Name of Zversion Query ?
    If possible , can you please tell me the process ?

    Hi Hameed,
    This may be the reason you are getting an error.
    The target InfoCube, the InfoCube for the query copies, must contain all the InfoObjects of the source InfoCube (InfoCube of the original queries).
    The another reasons may be the copying of queries within the same cube shouldn't be done by RSZC.
    It's better to approach the Bex Query designer.
    Hope you understood..
    Check the link below for more information:
    Re: How to copy query elements without Bex
    http://www.bi-expertonline.com/article.cfm?session=&id=2055
    Re: copy queries + variants + workbooks -- RSZC ?
    Regards,
    Ravi Kanth
    Edited by: Ravi kanth on Jun 10, 2009 10:03 AM

  • How to find the technical name

    Hai,
    How to find the technical name of a data source for General Ledger: Balances – Period Breakdown
    Thanks

    Hai
    my question is in General Ledger: Balances – Period Breakdown
    the link is showing General Ledger : Balances , Leadingledger
    I got this link in queries for General Ledger: Balances – Period Breakdown
    http://help.sap.com/saphelp_nw70/helpdata/en/2d/955a73da4d6d41a0a6128caf274ce8/frameset.htm
    But here technical name of info cube is given.But i dont know how to find the technical name of the data source.This might be simple question i think but i am new to SAP
    Thanks

  • Changing the technical names of an ODS and queries

    Can I change the technical name of an ODS and the queries that are built on it? If so how? Thanks

    Hi Niten,
    As said by others it is not possible to change the technical name of any BW Object as there are too many complexities involved. However a possible option is create another ODS/cube and queries as the copy of the existing one and then transfer all the data.
    Refer this post:
    Re: Change infocube name
    Bye
    Dinesh

  • I NEED THE TABLE NAME FOR THE  FIELD DESCRIPTION GIVEN!

    I NEED THE TABLE NAME FOR THE  FIELD DESCRIPTION GIVEN!
    Partner Type
    Partner Type Desc
    Partner no
    Partner Name
    Partner Address 1
    Partner Address 2
    Partner Address 3
    Partner Address 4

    Hi Jyotirmoy ,
                        You can get all partners and their type in table EDPP1, depending of the partner type you need to go to specific table for address and other details, like for partner type KU(customer) goto KNA1,etc for partner type LI(vendor) goto LFA1 etc for partner type B(bank) goto BNKA etc ....
    Sirish

  • How to get the query design element meaning with the technical name ?

    In BI 7.0 query designer, we got error msg in Transport Connection like:
    Object 41PPHH3DICYQ56L2XJGXDRSMT is already being
    edited by user_id
    Choose 'Display object' or 'Cancel'.
    How to check what design element is for 41PPHH3DICYQ56L2XJGXDRSMT?  And what could cause the above error?
    We will give you reward points!

    You can collect the query and its elements in the transport connection. The under the technical name you will find this and the element.
    Hope this helps.
    Kumar

  • Can we see all the Technical names and field/common names in one screen

    Hi SAP Gurus,
    Can any one plz. clearify the querry of 'all the technical names, field names, common names, table names in one screen? if so, how?
    Thanks inadvance
    Regards
    Namrata

    Hi,
    For a particular screen,if u want to see all the technical data,
    Go to system->status->screen->double click on the screen->flow logic.
    Regards,
    Manoj.

  • Hierarchy in BW and showing the technical name

    I have created a Hierarchy off 0COSTCENTER.  I only want the technical names of the cost centers itself to show.  All other node levels I do not want the technical name to show up.
    Can someone let me know if this is possible?
    Thanks much,
    Jason

    We had the same problem. Unfortunately this setting only seems to be available for a query view. We were using web reporting anyway so we just converted the dataprovider to be a query view where this setting had been made. It's a bit ugly but it worked.

  • The technical name is Elastic Time - the time is now

    The technical name is Elastic Time - the time is now.
    http://www.sonicstate.com/news/shownews.cfm?newsid=5402
    This is the future of audio editing, and I sincerely hope Logic will provide this same (or superior) functionality very soon, as it is the wave of the future. I will be watching Pro Tools 4.7 LE very closely, and for obvious reasons.
    Hads

    I wonder what this is all about?
    http://docs.info.apple.com/article.html?artnum=301075-en
    "A new feature in Logic Pro 7.1 is Elastic Audio, which enables your recorded tracks to follow any tempo changes you make after you've recorded them."
    Does Logic 8 have this?
    I went to the blurb you mentioned and it didn't seem to explain how the Pro Tools "elastic audio" actually works. I Googled and found that Ableton Live apparently has it.
    I'd never heard about it before.
    Just curious 'cause I can't play my guitar to a click track and my timing varies quite a bit.
    Does anyone know if this is already part of Logic?
    Thanks, Johan

Maybe you are looking for

  • Problems with spaces in file or directory names and Word.exe

    Hi I'm trying to open a file with Word from my java aplication, and I have a problem with some file/directory names. I have this String cmd = "c:\\Program Files\\Microsoft Office\\Office10\\WINWORD.EXE" + " " + path; try { Runtime.getRuntime().exec(c

  • VOID watermark in Adobe PDF form

    Hi Gurus, Do you know that is there any way to place a watermark like VOID in smartforms in Abobe PDF forms, in order to display VOID in the QA system, but display without this watermark the forms in the production system? Thanks in forward for your

  • Calendar colours broken suddenly, and odd new calendar called, "New List"?

    Hi, So, suddenly today iCloud has changed the colours of two or three of my calendars spontaneously after them being the same colour for months, and won't let me change them back - after a sync they just revert to whatever iCloud has decided they mus

  • Get rid of the mac top bar?

    I recently updated my operating system, and when I booted up Firefox again, it had this finder bar that wasn't there before, and I would like to get rid of it again, and I have no idea how. Here is a screenshot of what I am talking about, the bar abo

  • Adobe CS6 installer won't download onto my Mac!

    I am trying to download Adobe CS6 Creative Suite Standard onto my new MacBook Pro and the installer won't download. It starts downloading and then suddenly stops and won't start again. I'm very frustrated, can anyone help?!