SAPBPBEOPBT_PIBDTA bank file not correct

When you create bank file using the format SAPBPBEOPBT_PIBDTA following content can be observed in Record Type 0:
00 0703051100001030511 000000123456711DB&S bvba                
8650 HOUTHULST            BELGM                     0          5
Here we can see that a carriage return (C/R) is posted before the ZIP-code 8650 in second line and the bank file can not be imported on the side of bank.
One of the root cause can be found in settings of Address Formats. In this case was used Address Format Standaardadres (Europa).
To create a correct bank file using format SAPBPBEOPBT_PIBDTA the Address Format should be changed via Administration->Setup->Business Partners->Countries->field Address Format. Change it to "Netherland". Then the content of created bank file will be following:
00 0703051100001030511 000000123456711DB&S bvba                 8650 HOUTHULST            BELGM                     0          5
The Record Type 0 is now correct.

Hi Experts,
   I am completed APP (F110) then Iu2019m downloaded SEPA XML Format from FDTA (Transaction Code). SEPA XML File uploaded in Bank Portal.  Bank Portal given message as below.
1.     This file is not a valid SEPA XML file
2.     Mistake in line 1, column 158: Unknown element u201CDocumentu201D.
Please suggest me how I should find the line one, column 158 in SEPA XML File.
I will appreciate your help.
Regards,
Surendra.

Similar Messages

  • Length of audio file not correct in Firefox, Safari, and Chrome. Why?

    Hello,
         I created a mp3 player that loads the file, displays the sound length, and plays the audio file. I have notified that on Firefox, Safari, and Chrome browsers, the length of audio file is not correct. I have uninstalled and installed flash plugin and activex control but no luck. Any ideas why I am experiencing this behavior?
    Regards,
    Nilang

    As a test, try putting an empty JSP in front of it that triggers the session to be created, and then redirects (with a HTTP meta refresh for example) to the frameset jsp to see if that fixes anything.
    If that fixes it, then I guess the pages load too quickly.

  • HT3702 i have charges on ny bank statement i did not approve. if this is not corrected. I will file a conplaint against this. I put in for a several return calls and no one has called yet.

    I have charges on my account I did not approve. I have sent requested for return phone calls to discuss this problem nd no one has called. If his problem is not corrected. I am reporting it as fraud.

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple. You will need to contact iTunes Support again : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • Why is my .psd file not rendering correctly in ae

    Some layers of the .psd document are not rendered correctly. However they are imported.
    The strange thing is that when I first move from Photoshop to Illustrator, save it as an .ai file it is rendered properly (in Ae).
    I am kind of clueless as to what is causing this issue.
    Kind regards,
    Jelle

    Okay if more information is needed, i'll provide. However you may disregard my initial comment about illustrator. It flattens the photoshop layers so I do not have any flexibility in After Effects. In other words, my main question remains: why is my psd file not rendering correctly in ae?
    Further details:
    -photoshop cc and after effects cc.
    -macbook pro retina
    If still not clear enough, please tell me what details you are looking for furthermore

  • When I try to back up my hard drive to an external hard drive if an alias is not correct or a file is not recognised it fails and I cannot tell the sytem to ignore the file. Anyone know why and how I can get around the problem?

    Hi
    I have a Mac PowerBook G4 running OSX and a Hitachi external HD.  When I try to back up the data from my Mac to the HD it copies much of the data across but some files such as incorrect "alias' files and some other files do not copy.  The messages I get indicate there are problems but when I click the OK button the backup stops.  I then have to either delete these files or copy other files with correct alias details to overwrite the existing one. I then have to start the backup all over.
    I have been carrying out a bfull backup so have been copyiing the hard drive of the Mac an pasting it into the external HD.  Is this my problem? If so how do i carry out the backup function. I have been informed by Hitachi that I should be using the Mac's own "Time Machine" software but I don't seem to be able to locate this.
    I have been told that there should be the option to either cancel the backup or skip the file but I don't get that. 
    Any ideas as I am running out of patience.
    vic

    If you are running Tiger, you don't have time machine. 
    You need to get something like SuperDuper! or Carbon Copy Cloner (sorry, I don't have a handy link for CCC but you can Google it to get their site) to make a clone of your drive on the external and then do incremental backups.  The free versions do a lot and you can upgrade to the full-service versions for small change if you need more.  The one time I used SuperDuper! for cloning a volume it worked just fine. 
    (My backup application is the last PPC capable version of Retrospect, which does a credible job, or has over the past ten-twelve years.)

  • The online conversion of my pdf file to word did not correctly convert the tables and certain other formatting.  I wish to obtain a refund.

    The online conversion of my pdf file to word did not correctly convert the tables and certain other formatting.  I wish to obtain a refund.

    Hi yammyamm,
    I'm sorry that your conversion didn't work out for you. Please contact Adobe Customer Support via phone or chat, and an agent will be able to process that cancellation/refund for you. Here is the contact information: Contact Customer Care
    Best,
    Sara

  • Create the object - not correct data in the file ?

    I have the text file, then I parse and create objects MyDocument (one row = one document). If row is corect then I create object MyDocument. But what I must do when row is not correct. The row can have 3 type of errors:
    1.Not correct length of row
    2.Not filled required fields in row
    3.Field are filled by not correct data
    Is a good to throw exception when I get one of this errors. Do I need to store this errors on separate class (MyObjectErrors extends Exception)?
    So when row is correct I create the object MyDocument. Otherwise I NOT create object MyDocument and throw exception. Is this a good solution?

    One question These 3 error you want together or what let me know i ll do that code n give you

  • Story does not correctly export fdx file with scene numbers? Bug needs to be fixed.

    Story does not correctly export fdx file with scene numbers? Bug needs to be fixed.

    Okay, Even if i remove the scene numbers from Story and export the file to Final Draft 8. The format in incorrect. The "transitions" ex. CUT TO:  are not in the correct allignment. Also there are numbers on each of the dialogues
    Pretty much alot of the formatting is not the same. Spaces  that break dialouge and action which are there in Story, are not converted over to Final Draft.
    Please fix this as soon as possible.
    thanks,
    Rohit

  • PDF files not being displayed correctly, instead I get a blank screen with some sort of small pinned icon in the centre.  It was working fine until today HELP!

    PDF files not being displayed correctly, instead I get a blank screen with some sort of small pinned icon in the centre.  It was working fine until today HELP!

    What is your operating system?  Reader version?  Are these local or online PDFs?  If online, in what browser?
    Can you post a screenshot: https://forums.adobe.com/thread/1070933

  • KM, HTML file, Not rendering correctly

    Hi Everyone
    I have an html file that is stored in knowledge management.  The html file references few folders/images that are also stored in KM. When I create a KM Document iView, the HTML file shows; however, the various images/style sheet that is stored along with the html file KM do not appear.  Thus the html file is not rendering properly. 
    With this being said, I can create an URL iview and everything works as it should (the html file appears correctly with the necessary images).  The problem is that I am developing a solution for an external and internal facing portal, thus the URL iView option is not going to work for me.  I need to have a way for this KM html iView to display properly...perhaps with the KM Document iView template.
    Has anyone encountered an issue such as this and can offer assistance.  Again, the KM Document iView template will work, if the html file it is calling in KM can correctly reference other folders in KM that contain various images/style sheets that are a part of the html file.
    Any help is greatly appreciated.
    Best Regards,
    Scott

    Hi Scott.
    In order to solve your problem with relative links to image and css files inside KM I suggest two variants:
    1. Replace relative links as I mentioned in this message Re: JavaScript and CSS info in WPC.
    2.The second solution is:
    a. Create an blank html file inside KM folder where the base.html file is stored.
    b. Download the newly created file for local editing.
    c. Place an iframe that points to your base html file between <BODY></BODY> tags. Use a following code as an example:
    <iframe width="100%" height="100%" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" src="base.html"></iframe>
    d. Upload this file back to KM.
    e. Point your KM Document  iView to the created html file.
    Best regards,
    Aliaksandr Zhukau
    Edited by: Aliaksandr Zhukau on Dec 3, 2009 11:04 AM

  • HELP....AVCHD / MPEG files not playing correctly!

    I have been trying to download video that was shot with the new Sony FS100 camera that I'm told are AVCHD or MPEG files to my older Adobe Premiere Pro 1.5 timeline, but they are not playing correctly. When I reverse the field dominance, the image plays better but the sound is strange (I was able to speed the sound to 450% and it worked better, but then the balance of the sound from the clip is lost somewhere.).
    Any suggestions to make these files play and work correctly? I tried converting them to AVI files but that showed up completely black on the timeline! Anything I've tried either affects the video or audio negatively!  I try either makes the image play or stutterThis was shot in regular SD format, NOT HD, so they should be able to play on  a standard timeline. Can anyone suggest anything to help please? Much appreciated!

    Thanks for your reply, I ran it through Media Info. Here are the results:
    Container & general information:
    MPEG-PS: 290 Mib  4min22s
    1 Video stream: MPEG video
    1 Audio stream: AC-3
    First Video Stream:
    8833 Kbps, 720*480 (4:3), at 29.970 fps, MPEG video (NTSC) (version 2) (Main@main) (Custom Matrix BVOP)
    First Audio Stream:
    256 Kpbs, 48.0 Khz, 16 bits, 2 channels, AC-3 (DVD-Video)
    Please let me know where to go from here. Thanks so much!
    Date: Fri, 11 Nov 2011 10:50:15 -0700
    From: [email protected]
    To: [email protected]
    Subject: HELP....AVCHD / MPEG files not playing correctly!
        Re: HELP....AVCHD / MPEG files not playing correctly!
        created by Ann Bens in Premiere Pro CS4 & Earlier - View the full discussion
    Welcome to the forum.A screendump of what these SD files exactly are would be very nice.Run them throught Media info.http://mediainfo.sourceforge.net/en
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4020725#4020725
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4020725#4020725. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • HT201317 When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)

    When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)

    Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
    It sounds like you are using two methods to upload to Facebook:
    1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
    2. Exporting pics and uploading to Facebook from the browser.
    I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
    I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
    Your problem is not with Aperture, it is using Facebook for showing your work.
    If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
    If you insist to use Facebook as your way to share your work, then your workflow should be this:
    1. Right click images you want to share.
    2. Select Export version.
    3. Export as 100% size and ensure the export settings are set at 100% quality.
    4. Upload this pic into Facebook.
    This will get you the best image size and resolution on Facebook.
    See how you go.

  • Transferring files from Windows, names of songs not correct in iTunes

    so I have my music on an external hard drive from my windows machines. The songs 'file names' (what you see on the HD) are correct. When I tried to bring some over to iTunes, via add to library, the info was added as 'Track 1" ect, with no artist or album info. In the itunes music folder, it was sorted as the artist folder (I copied and pasted from my HD)...
    I also tried to 'import' from itunes, and still the info was not correct.. when I tried the advance button to get cd info, itunes told me I couldn't do it because i didn't import with itunes, even though I did import from the external HD with itunes....what is going on? Does the 'get track listings' onlyl work if you are importing CDs?
    Also since itunes just looked at the files as 'track 1' etc, that means the MP3 file did not have the correct tags, so I have re-enter everything? That the files I was seeing was just the names I gave the MP3? Does this mean I have to go back and enter the correct info for all those mp3 that itunes read as "track 1" "track 2" etc?
    TIA
    new macbook   Mac OS X (10.4.7)  
    new macbook   Mac OS X (10.4.7)  

    It sounds like the artist and track names are part of the file name and your Windows player was grabbing that info from the track names. iTunes does not use file names to supply such information and instead uses standard internal tags to hold this information and when you imported the tracks into iTunes it supplied some default info. You will need to edit the tags using a tag editor, such as the one built into iTunes or an external one such as can be found on VersionTracker.
    Gracenote lookups can only be done on tracks and albums that were directly imported by iTunes from the original CD. Importing music files from any other source cannot be looked up.
    If you still have access to a Windows machine, you could try running the files through MusicBrainz using Magic MP3 Tagger. I have not had much luck identifying taggless or unknown songs using iEatBrainz for the Mac (these programs are available on MusicBrainz).
    There are some scripts in the Managing Track Info section of Doug's AppleScripts for iTunes that will copy filenames to track tags that can automate converting filenames to tags, but there are limitations on what can be done and you will still need to manually clean up the data and to add tags that cannot be added using such a script.

  • File not formatted correctly error

    Dear All,
    when am trying to import a contract file as excel sheet, not CVs file, i get the error ( File not formatted correctly ). any advice?

    the issue with date formatting would be corrected in Excel. When an export file that includes dates is opened in Excel, they get reformatted by the Excel program. In my experience, I have had to reformat those cells in Excel to the YYYY-MM-DD format and save the Excel file before I could import again into CM. But, if you are just exporting and then importing without opening the file in Excel, then the dates are not the problem. What are you exporting from CM? Are you trying to import into a different project or database than you exported from?

  • Files are not correctly named and only 1kb in size - Music Downloads

    I have encountered a different problem. I bought a music album on my Z10, and when i download it, the files are not correctly named and only 1kb in size.
    No error is given when downloading, but when i open it, the phone switches to the music player and clains the file does not exist. When i look on the sdcard, there are files which contain something like this:
    <html><head><title>Object moved</title></head><body>
    <h2>Object moved to <a href="http://media.geo.7digital.com/media/error.aspx?errorCode=2001&amp;errorMsg=The%2btrack%2b'8638556'%2...">here</a>.</h2>
    </body></html>
    Is there any way how I can deal with this problem?

    Ok, does anyone from support read here? I bought this album on 23rd of March. Emails to the appworldsupport email adress from the confirmation email give me just the information back that "direct support is unavailable through this address" I would really like to finally listen to my music... As i paid for it. It still does not download... Is there any email address i can contact for this issue?

Maybe you are looking for