SAP BW Query -- Universe -- QAAWS -- Xcelsius的行权限控制问题

如题，我现在想通过SAP BW Query --> Universe --> QAAWS -->Xcelsius的方法使得Xcelsius动态获得BW的数据。
我是用我BW的开发帐号连接测试读取数据没有问题，但是现在的问题是，如何集成BW的数据访问权限控制？
我已经将SAP BW系统中的角色和用户都导入BOE了，使用SAP验证现在也能登陆InfoView或者是CMC。
但是我在Universe中将链接设定成固定输入我的用户名密码就不能控制权限了，但是另外两个选项【查看中刷新报表时使用单一登录】和【使用BusinessObjects凭据映射】又不能连接BW。请问我的思路是否正确，那应该怎么样做才行？

思路是对的，首先做BW与BO的SSO后可通过配制单一登入，启用受信任的身份验证，再通过OpenDocument用BW用户使用共享秘钥来访问CX就可以实现权限控制了、

Similar Messages

R/3 Infoset -- Bex Query -- Universe -- WebI / Xcelsius

Hi there,
i got a hint that it should be possible to connect an Infoset with a Bex Query, but i'm not sure if they mean a R/3 Infoset or a BI Infoset. I know that a connection from an universe to an BI Infoset works but does this also work for an R/3 Infoset ?
Thanks Sebastian

Hi,
This Infoset is an BI Infoset not R/3 infoset.
We dont have an directoption to connect either WebI/Xcelsius with R/3.If you want to connect Xcelsius with R/3 we have to us Data Federator.Here we have an option to use FM,Infoset Query.
Regards,
Shiva Kumar G.C
Edited by: Shivu Kumar on Jun 3, 2010 5:45 PM

Combine query, result from another query on SAP BI query Universe?

Hello all,
We are using SAP BI queries as datasource for our universes. Is the combined query option disabled for webi reports written on such universes?
result from another query - is this option active for such webi reports? I see both these options greyed out so wanted to check.
One last thing what is really difference between subquery and results from another query? subquery - you can use filters from that one data provider only right? or can you use a different data provider/report in sub query?
Thanks a lot for all the replies.

Hi,
in BO 3.1 Combined query and result from another query options are not available in webi report on OLAP Universes (SAP BW Universe.)
Thanks,
Amit

WebI Report on SAP BW Query Universe shows error Message

Hi,
I build a universe on a SAP Query und developed a WebI Report on top of that. With a SAP_ALL user everything is fine. But then I tried it with a user and its rolls decribed in the Best Practice Guide and I Recieved the following Error:
Datenbankfehler. Der Datenbankfehlertext lautet: Die MDX-Abfrage SELECT { .[4B5IPTSAQ8V8UTEVIADGC2NWX], .[4B5IPTKM7A9JC6VFCGB420P75], .[4B5IPUUPD1VSFY44BGP5QCHHT], .[4B5IPTZZ97GYDFYBO4FSM4MMP], .[4B5IPU7NS62NW2HRTYI4W6LCH], .[4B5IPUFCB4ODEP17ZSKH68K29], .[4B6HSC27R5177KZU77OUK5K7L], .[4B5IPW4SITI1JPCTAH37EO9SH], .[4B5IPTCXOBNTTKBZ6M8RRYQHD], .[4B5IPVHQXXOWZTQGSYW6KIDN5], .[4B6HTFBKNZZMESEG0VNLY6ZYP], .[4B69NESW3JU3TBXLMLYMUM0EP], .[4B6HSC9WA3MWQ7JAD1R6U7IXD], .[4B5IPV2DW0HHYKNKHARI0EG7L], .[4B5IPUN0U3A2XBKO5MMTGAIS1], .[4B5IPVX3ZUWC12TD4N0V4MB2P], .[4B5IPX775MIL4U223NEWSY3DD], .[4B5IPWRU3PB63KZ5RZA88U5XT], .[4B5IPWK5KQPGKYFPM57VYS781], .[4B5IPVPFGWAMIG9WYSYIUKCCX], .[4B5IPXMK7JQ0634YFBJLD20SX], .[4B5IPWCH1S3R2BW9GB5JOQ8I9], .[4B5IPWZIMNWVM7ILXTCKIW4NL], .[4B5IPVA2EZ37H770N4TUAGEXD] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( .[LEVEL01].MEMBERS, .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), .[LEVEL01].MEMBERS ), { .[0000072801] } ), .[LEVEL01].MEMBERS ) DIMENSION PROPERTIES .[2ZRLISPFAC___F101], .[1ZRLISPFAC___F119], .[2ZRLISPFAC___F119], .[2ZRLISPFAC___F21], .[2ZRLISPFAC___F34], .[1ZRLISPFAC___F497], .[2ZRLISPFAC___F497], .[1ZRLISPFAC___F53], .[2ZRLISPFAC___F53], .[2ZRLISPFAC___F560], .[1ZRLISPFAC___F578], .[2ZRLISPFAC___F578], .[1ZRLISPFAC___F591], .[2ZRLISPFAC___F591], .[1ZRLISPFAC___F608], .[4ZRLISPFAC___F608], .[1ZRLISPFAC___F611], .[2ZRLISPFAC___F611], .[4ZRLISPFAC___F611], .[2ZRLISPFAC___F615], .[1ZRLISPFAC___F622], .[2ZRLISPFAC___F622], .[4ZRLISPFAC___F622], .[1ZRLISPFAC___F710], .[2ZRLISPFAC___F710], .[10COUNTRY], .[1PMOBJTYP], .[20COUNTRY], .[20POSTAL_CD], .[2PMOBJORT], .[2PMOBJTYP], .[2ZRLISPFAC___F720], .[5PMOBJTYP], .[2ZRLISPFAC___F734], .[1ZRLISPFAC___F735], .[2ZRLISPFAC___F735], .[2ZRLISPFAC___F737], .[5ZRLISPFAC___F737], .[2ZRLISPFAC___F738], .[5ZRLISPFAC___F738], .[1ZRLISPFAC___F752], .[2ZRLISPFAC___F752], .[1ZRLISPFAC___F804], .[2ZRLISPFAC___F804], .[2ZRLISPFAC___F806], .[2ZRLISPFAC___F807], .[2ZRLISPFAC___F808], .[1ZRLISPFAC___F82], .[2ZRLISPFAC___F82], .[1ZRLISPFAC___F846], .[1ZRLISPFAC___F851], .[5ZRLISPFAC___F851], .[1PMCAGTYP], .[2PMCAGTYP], .[2ZRLISPFAC___F852] ON ROWS FROM SAP VARIABLES INCLUDING .[20080825] konnte nicht ausgeführt werden. Fehler FUNCTION_NOT_FOUND. (WIS 10901)
Any Ideas?

A couple of tests to run:
1. Can you ask the Administrator user to run the report?
2. Can the regular user run a query with only one or two objects from the same db/tables?
These should help to give a clearer picture of where the credentials might be missing. Authorization can be configured on the BOE CMS, but it can also be erroring due to DB access rights.
- If test 1 fails, then it's probably a DB access rights issue.
- If only test 2 fails, then it's a CMS credentials issue.
- If both succeed, but the original query fails, then it's probably a specific object that's causing the problems. In that case, you'll have to incrementally add or subtract objects to get to the culprit.

Unable to use SSO with universe connection on top of SAP BW query

Hi,
We're creating a universe on top of a SAP BW query by using universe designer.
We logon to universe designer by using SAP credential.
When creating the connection, we set the option "Use Single Sign On when refreshing reports at view time" in order to logon to BW server. But when clicking next, an error arises:
"DBD: Unable to connect to SAP BW server Incomplete logon data"
The strange thing on this is that there is one laptop which is able to set up this kind of connection, while all other workstations are not able to set it because they recieve that error (we all work against the same BO server). So this looks like an installation issue.
We reinstalled SAP Integration Solutions on those workstations, but problem is still the same.
I found thread: Universe Connection Authentication on SAP BW which talks about the same issue, but solution involves uninstalling Xcelsius. But we do need Xcelsius!
Any suggestions?
Thanks,
David.

>
Ingo Hilgefort wrote:
> Hi,
>
> - how did you enter the SAP credentials when logging on ?
username/password with sap authentication
>
> - are you using a application server or a message server for the connection ?
Application server
>
> - SAP GUI is installed ?
SAP GUI 710 patch 11
>
> - SAP Integration Kit is installed ? is it a full keycode or a temp keycode ?
SAP Integration Solutions with temp keycode
>
>
> thanks
> Ingo

SAP BEx query's Conditions and Exceptions on BO Universe

We are planning to create Conditions and Exception on SAP BEx Query. And provide this query to BO team for their development
Could anyone tell me in what form will these BEx objects be visible in BO-Universe ....as detail objects...or query filters and a.s.o?
Will they be Invisible? If invisible will they be atleast applied to BO-Universe.
For e,g: I know that, BEx Query filter will be applied to the underlying query but are not visible in OLAP universe.
- Anil

Hi,
Conditions and Excpetions are not supported by OLAP BAPI tehrefore they are not generated in universes or consumed at query level.
You have to create conditions on measures in universes (except top end bottom exceptions that are not supported).
Exceptions need to be done at cliient level (Webi, XCelsius, etc).
I BOE CI 4.0 conditions will be supporte by the Semantic Layer direct acces with BICS but exceptions will continue to be created at client level.
Didier

Multiple Universes (based on SAP BI Query) & single WebI Report

Hi,
We build OLAP Universes on SAP BI Queries. One of the ways to consume multiple universes in a single WebI report is to "add query" from another universe into the same WebI page / another WebI tab for the report.
Is there a possibility to pick and choose fields from different Universes (based on SAP BI Queries), into a single WebI report ... of course respecting their technical linkage.
regards,
Rajesh K Sarin

Hi Ingo,
We have created multiple subject Area Universes (based on SAP BI Queries). Is there a possibility to select a particular object from one of the Universe and another object from another Universe into the same grid eg. Notification Number from Work Management Universe (SAP BI Query based on Customer Service Data Flow / Multiprovider) and Invoice Number from Invoicing Universe (SAP BI Query based on Invoicing Data Flow / Multiprovider). Common aspects for both of these could be say a Customer Account Number.
As per my understanding, we cannot do this if we have created Universes on SAP BI Queries.
Nearest possible option is to display two tables on the same WebI report - one from Work Mgmt Universe and other from Invoicing Universe.
Please guide.
regards,
Rajesh K Sarin

Error # 2032 while opening SAP BI Query in Xcelsius using Direct connectivi

Hi Experts,
I have following set up -
Xcelsius Enterprise 2008 SP3
SAP BI EHP1 - SP5
Operating System - XP
SAP GUI 710.
I have two systems - 1. Internal IDES and 2. Client system
I open a Xcelsius and try to create a connection "SAP BW NetWeaver connection" in Xcelsius, I am prompted for login details.
1. When I give internal IDES system credentials, it logs me in and the queries are displayed and I can select any query without any error.
2. When I give client system credentials, it logs me in, and shows me the BW queries. Once I select any query, it gives me "Error # 2032"
RSPOR_T_PORTAL in SM30 is set properly as expected and explained in http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333333393330333733303333%7D.do
Can anyone help me to resolve this issue?
Timely help would highly be appreciated!
Regards,
Rashmi

Hey there.
We've solved the problem on our test systems.
But we have got a special constellation. Our BW Portal is running on an other machine than the ABAP Stack.
Meaning, maybe it's not for all of you the solution.
But it was very simple in the end.
We've patched our System (ABAP and Java Stack) to SP6 (its now 7.01 SP6).
The reason was a missing rfc service that should have come with the SP5 patch. But it wasn't.
If the service is present could be tested with opening the following link:
http://<portalserver>/crossdomain.xml
Result shouldn't be the 404 page.
Please tell us if that was the solution for you, too.
Greetings

Can not build a Universe based on a SAP/BW Query:

Hi,
In Universe Designer I can not build a Universe based on a SAP/BW Query:
-The Universe Items -> Sight -> Universe Window and -> Sight -> Liste Mode are greyed our
- Its simply not possible to move Universe "Objects" = "Classes" into the Table, Join or
Item Plane.
I am useing:
-BO XI 3.1
-BO Solutions for SAP Integration
-Universe Designer
Universe Designer based on a Database is ok
The Connection to the SAP System is stored in BO XI 3.1
What's missing ?
Any Rights/Authorizations are Misseing ?
Thanks a lot !
Martin

Hi
when working with OLAP universes (eg. universes based on SAP BW queries) it is not possible to work as you normally do when you have a universe based on a relational data source. The data madel is the one from the OLAP source (cube) so it is not possible to create your on joins, tables etc. In this case you can only add/modify the objects in the object browser (left panel).
Regards,
Stratos
PS: The Data Federator will allo you to create relational universes on an SAP BW source. Still this is a product that must be licensed seperately and currently does not support SAP logon ticket-based SSO.

Connection xcelsius sap bw query

Hello,
I am trying to create a connection between xcelsius and a sap bw query. I created a new connection and defined a place for the result of the query but I don't get any data in xcelsius - how do i get data into xcelsius?
thanks

Hi Margit,
In Direct SAP BW Netweaver connectivity , You do not see the data in the spread sheet of Xcelcius.
Data comes only at runtime.
You can check wheteher data is coming are not by Mapping a label or any other component and check if it is showing the value correctly when u publish it.
You cannot preview data using SAP BW Netweaver connectivity.
You will have to publish it and then Launch it.
Note :Check the "Refresh befor Components are loaded" in the Usage Tab.
Please let me know if you need any further help in this.
Regards,
Bhargava Bommidi

Universe based on SAP BI Query

Hi,
I have created a universe based on SAP BI Query. In the universe there is a class called Time and has the below dimensions.
L01 Calendar Day
L01 Calendar Month
L01 Calendar Year
I want to create a dimension that will return only the current year (2012) and another dimension that will give the last year(2011)
Please suggest how to create these two dimensions in the universe using the XML tags.
Thanks,
Lavanya

Hi,
Here's a white paper on SDN with some samples: https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/c0a45246-ce76-2b10-e688-f5c8206203eb&overridelayout=true
Also, in the Universe Designer, there is an MDX formula editor when you create objects in the OLAP universe. it's in the 'select' screen, click the " >> " icon.
Regards,
H

Is direct connection from SAP BI 7.0 to XCelsius already available?

Hello,
Is direct connection from SAP BI 7.0 to XCelsius already available?
Thanks

In Xcelsius SP2, visualizations can be connected to an SAP system and use live data returned by an SAP query.
Refer Xcelsius SP2 what's new guide:
http://help.sap.com/businessobject/product_guides/xcelsius2008SP2/en/sp2_xcelsius_new_en.pdf

Prompt List of Values in WebI - SAP BI Variable - SAP BI Query -BI Infoset

Hi,
We have a Multiprovider built on an Infoset. SAP BI Infoset is built using 2 DSOs.
There is a SAP BI Query on top of this Multiprovider.
Multiple-Single Values type Optional Variables are created for some of the Objects of this SAP BI Query.
Universe is created on top of this SAP BI Query, using SAP Integration kit.
WebI is created on top of this Universe.
Prompts are created on some of the Universe Objects, for the WebI report.
We are facing a typical problem.
When a WebI prompt is created on one particular object, (which also has a Multiple Single Value type Optional Variable in SAP BI Query), its List of Values is showing up only first three values in WebI. The SAP BI Variable in BEX Analyzer shows up all the 8 values for the List of Values, for the same object.
The Output WebI report has more values for the object than shown up in the List of Values & this is the problem.
We tried to keep the settings in Info-object, DSO, Infoset, Multiprovider = Values in Master Data (for the List of Values).
Similar objects and similar variables for the same query / webi show all the List of Values.
Any guidance on aspects to be checked would be helpful.
regards,
Rajesh K Sarin

Problem :
If an SAP BI Infoset is used in data modelling, and a restricted key
figure is created in the SAP BI Query; the resultant WebI Object Prompt
for the Info-object, only shows up LOVs which have been used for the
restricted Key Figure. Both the things are not related except for the
fact that some of the values for the same object are used for the
restricted key figure.
Details :
We have a Multiprovider built on an SAP BI Infoset.
SAP BI Infoset is built using 2 DSOs.
There is a SAP BI Query on top of this Multiprovider.
There is a restricted key figure in the sap bi query. KeyFigure "Number
of Records" is restricted for 3 of the relevant Info-object "Meter
Reading Status" values.
Universe is created on top of this SAP BI Query, using SAP Integration
kit. WebI is created on top of this Universe.
Prompt is created on the Universe Object for Meter Reading Status, in
the WebI report.
List of Values is showing up only the three values in WebI (which were
used in the Restricted Key Figure calculation).
SAP BI Variable in BEX Analyzer for the same Info-object Meter Reading
Status shows up all the 8 values for the List of Values.
The Output WebI report has more values for the object than shown up in
the List of Values & this is the problem.
We have kept the settings in Info-object, DSO, Infoset,
Multiprovider, Query = Values in Master Data (for the List of Values).
When we delete the "Restricted Key Figure" from the SAP BI Query, the
refreshed Universe and Webi have a complete set of List of Values
applicable.
Steps for Reconstruction
1. Create Infoset
2. Create SAP BI Query on Infoset
3. Create Restricted Key Figure for Number of Records and few of the
values for a characteristic info-object "X".
4. Create BO Universe on SAP BI Query
5. Create Webi on BO Universe
6. Create a Prompt on the characteristic info-object "X".
7. Check List of Values for the characteristic info-object "X" in SAP
BI Query and WebI.
8. LOVs in WebI are equal to the values used for restriction in the
restricted key figure.
9. Delete the restricted key figure from SAP BI Query.
10. Refresh Universe
11. Webi prompt shows all the values for the prompt on "X".

Report burst:To increase query performance in xcelsius

Is there anyway to increase query performance in xcelsius by using report bursting

Fremlin,
Report bursting is only for distributing your reports to your end users.
You can improve performance only by following the [Best practices|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a084a11c-6564-2b10-79ac-cc1eb3f017ac] in xcelsius.
-Anil

Performance Issue with Webi report uses SAP BI Query as the data source

Hello.
I have created a Webi ad-hoc report which connects to a SAP BI query through BO OLAP universe.
The layout of Webi is the exactly the same as the BI query. There are filters in the Webi to restrict the number of data extraction, but even with data result of 5000 rows, it took about 30 seconds.
If I execute the BI query with the same filter restriction, it tooks less than 10 seconds.
It seems that large percentage of time is consumed at the MDX part.
Is there any tuning method that could speed up the process time of MDX?
Thank you.
Justine
Edited by: Justine Liu on Mar 18, 2009 6:59 AM

Hi,
please take a look here:
[https://service.sap.com/sap/support/notes/1142664] (Look under related notes)
It includes references to various performance improvements of the MDX interface. From what I saw there it is advisable to upgrade your SAP BI (7.0) up to at least Support Package 21 (you are currently on SP 15).
This may also be interesting for you: There is a new Fix Pack 1.4 coming out for BOBJ XI 3.1. Combined with the related SAP Enh.Pack (not sure about the version of this one) should also improve WebI performance. This fix pack is not yet officially released though but it should not take look.
I recommend that you try the upgrade to Support Package 21 first.
BTW it is also advisable to take a look in the results of your MDX query (e.g using the MDXTEST transaction). You should make sure that your query is indeed restricted as expected. Sometimes the results you see in SAP native reporting tools (e.g. BEx Analyzer) differ from those returned from the MDX component, depending on the way variables/restrictions where defined in the query designer. It is all about making sure that there is no apples/oranges comparison here.
Regards,
Stratos

SAP BW Query -- Universe -- QAAWS -- Xcelsius的行权限控制问题

Similar Messages

Maybe you are looking for