SAPCAR: could not open for writing SAPCAR (error 28). Text file busy

Hi,
I´m trying to decompress this file( is for a kernel upgrade):
SAPEXE_15-10006264.SAR
And when I do SAPCAR u2013xvf SAPEXE_15-10006264.SAR, SAPCAR only decompress a few files and I´ve this error:
SAPCAR: could not open for writing SAPCAR (error 28). Text file busy
Instead when I decompress the SAPEXEDB_15-10006263.SAR, SAPCAR does this correctly. I´ve tried to download again the file but the error is always the same.Could someone help me?
Best regards,

Hi,
Now, I´ve unpacked the files but when I do the file copy (in order to upgrade the kernel), I´ve these errors:
cp: cannot create /usr/sap/SMD/exe/jcontrol: Text file busy
cp: cannot create /usr/sap/SMD/exe/jlaunch: Text file busy
cp: cannot create /usr/sap/SMD/exe/libicudata.sl.30: Text file busy
cp: cannot create /usr/sap/SMD/exe/libicui18n.sl.30: Text file busy
cp: cannot create /usr/sap/SMD/exe/libicuuc.sl.30: Text file busy
cp: cannot create /usr/sap/SMD/exe/sapstart: Text file busy
cp: cannot create /usr/sap/SMD/exe/sapstartsrv: Text file busy
So could you help me?
Best regards,

Similar Messages

"could not open key, unknown\components" error while reinstalling

I'm getting a "could not open key, unknown\components" error while reinstalling latest Itunes. Tried several time with same results

Try the following user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

The movie could not be exported because an error occurred. (File already open with with write permis

The movie could not be exported because an error occurred. (File already open with with write permis
Never received this error until I updated to newer operating system.

This sounds vaguely like the Error -49 some people have been getting. It's related to a feature in Time Machine geared towards laptop users who aren't always connected to their Time Machine backup drive.
This requires using the Terminal app, in your Applications/Utilities folder
To turn off Time Machine snapshots type in the following command:
sudo tmutil disablelocal
The Mac will likely ask for your password, so type it in and hit the return key. The type the word, exit and hit return. Quit Terminal.
Open iMovie and try doing another export and see if the same error message pops up.

Why am I getting the message "project could not be prepared because an error occurred. (File already open with write permission)" when trying to share my imovie to media browser?

Why am I getting the message "Project could not be prepared because an error occurred. (File already open with write permission.) when trying to
share to the media browser? I have done this many times before and never got this message. This is very frustrating. Can anyone help me?

Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
Easiest way to find out if this is the problem is by:
• Create a new User-Account
• Log out of Your old one and into this
• Re-try iMovie
If it now works OK - then 99.9% the problem is iMovie pref. file that needs to be trashed.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occurs only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W

Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in

Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in Windows Explorer." What is wrong? I cannot unterstand what I have to do!

Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium

The Itunes application could not open. An unknown error has occurred.(-50)

Does anyone know what his means and what to do to fix it?

I am having this same problem. It just started today but I can't even get iTunes to open.

Generic Error 3 VI could not Open

Solution for VI could not Open because of Generic Error 3

What version of LV are you working in? There is a known problem in 2011. NI can fix the VI easily,call and get a service request number, or you can go back to your last back up -- you do have a backup right?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

IP Softphone Error " Could Not Open Address Cisco Line "

I am setting up IP Softphone Version 1.3(3). My CallManager version is 3.1.3a.
The Problem:
I have created a CTI Port for this user, and added both his DN line appearances to this CTI Port.
I have created a user profile for the user and associated the USER_CTI with that user. Checked off "Enable CTI" etc.
What happens though is that when I launch Softphone and go to select my lines it will only allow me to select only 1 of the 2 line appearance not both.
If I select both I receive and error " Could Not Open Address Cisco Line: [User_Cti] DN#
However if I associate the user profile with his physical phone device not the User_Cti, I can get both line appearances up and running on his softphone. This is not desired though because whatever you do on the softphone happens on the physical phone (such as going off-hook brings dial tone on the Physical IP Phone.
Is this a limitation when using CTI ports that you can only associate 1 DN to a softphone? or am I doing something wrong?
Any Ideas
Thanks in advance
LSmith eTAC Telus

As outlined in the SoftPhone Admin Guide, it states that you may receive the "Could Not Open Address Cisco Line" error if another application has that line open. I confirmed that this is NOT the case by creating a totally new User Profile and New DN's, and then trying to link that CTI Port to Softphone. I still received the same error.
Cisco Article:
I Can See a Line But When I Try To Open it, Cisco IP SoftPhone Displays a 'Could not open address' Error.
Possible Cause This error typically occurs if another application has already opened the line (locally or on another computer), or the line is out of service. Each line can be opened only once. If the line has been opened before and the line is now out of service, the line will automatically go back in use. You do not have to do anything. If you tried to open a line that is out of service, you may need to restart the Telephony service and launch Cisco IP SoftPhone again.
Recommended Action Restart the Telephony service. See the "Restart the Telephony Service" section.
I tried and tested this once again no change.
Sincerely
LTSmith Telus eTAC

Getting error message 1402 & 1500 could not open key

I cannot download update error message 1500, cannot remove or repair program adobe 9,3,1 error message 1402 could not open key HKEY_LOCAL_MACHINE/SOFTWARE error 1500 canot install update

What is your operating system? I assume that you are on Windows.
Ca you uninstall Adobe Reader? Or do you get the error also during uninstall?
What is your antivirus application? Have you tried to disable your antivirus while installing?

Hi, i have problem when installing itune. it said: Could not open key HKEY_LOCAL_MACHINE32\SOFTWARE|Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel. please help me!

hi,
i have problem when installing itune. it said:
Could not open key HKEY_LOCAL_MACHINE32\SOFTWARE|Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel.
Please help me i can't do anything without itune

For "Could not open key/write value" errors when reinstalling try b noir's user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\
[LongStringOfLettersAndNumbers]" error messages when installing iTunes for Windows.
The technique can be applied to the branch of the registry mentioned in the error message.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Could not open ... could not unlink ... /var/db/BootCache.playlist

In 10.5.7, on my QS 2002 Dual 1GHz, I keep getting this message.
Awhile ago, someone suggested I Trash this file
/var/db/BootCache.playlist,
thinking it would be regenerated next Startup.
Is there a Terminal command that I can use to accomplish this? Something that would signle my OS X, to regenerate this file next go 'round?
Here are the log entries I find troubling:
Jul 20 17:43:33 localhost com.apple.launchctl.System[2]: BootCacheControl: could not open /var/db/BootCache.playlist: No such file or directory
Jul 20 17:43:33 localhost com.apple.launchctl.System[2]: BootCacheControl: could not unlink playlist /var/db/BootCache.playlist: Unknown error: -1
I see this in a number of other threads, but have not located a solution.
Thanks.

Bill Connelly wrote:
Last login: Wed Jul 22 10:13:18 on console
Even though I didn't get "data" on the second command, I went on and did all three
Moonstone-Art-Studio:~ moonstoneartstudio$ ls -l /var/db/BootCache.playlist
-rw------- 1 root wheel 58716 Jul 22 10:00 /var/db/BootCache.playlist
Moonstone-Art-Studio:~ moonstoneartstudio$ file /var/db/BootCache.playlist
/var/db/BootCache.playlist: cannot open /var/db/BootCache.playlist: Permission denied
Moonstone-Art-Studio:~ moonstoneartstudio$ BootCacheControl statistics
BootCacheControl: could not fetch cache statistics: Operation not permitted
BootCacheControl: could not fetch statistics: Operation not permitted
Duh!
I forgot that I was root when I tried this. Try again:
sudo file /var/db/BootCache.playlist
sudo BootCacheControl statistics
(don't understand the [code] ... [code] posting/reply request):
You need to put before and after the Terminal output, and the second one does not need the '/' which most of these formatting systems (eg HTML) require. Note these are 'curly' brackets, not square ones.
Thus This text will be mono-spaced like so:
This text will be mono-spaced{code}

What causes "report could not be opened for writing . . ." message

"This report could not be opened for writing. Any changes must be saved to a new file." The version is CR 2013 SP1. Win 7 Pro. I'm new to CR and can't figure out why I get this error. I've verified all Windows permissions. It's an SAP error message - not a Windows message. Thanks in advance.
rd

Hi Rd,
Per SAP Note 1911880, this has been identified as a Bug in CR 2011. Since CR 2013 is just a rebranded version of the same tool, the SAP Note should apply to CR 2013 as well.
For CR 2013, the issue has been resolved in FP3. I would suggest you to upgrade to the highest available version for CR 2013 and see if it works.
Another workaround could be to right-click the CR Designer exe > Run as Administrator > Log-in with Admin credentials > try opening the report.
-Abhilash

TP_domain_bd1.pfl could not be open for writing(invalid argument)

Dear All,
I have configure new the transported domin (STMS) and getting an error
TP_domain_bd1.pfl could not be open for writing(invalid argument)
Please suggeest how to salove this problem and i can see this flie there.
Regards,

Hi,
Did you configure the STms Porperly.
Did you Distribut the System
overview -> extras->press distrIbute and activate
Set the Transdir path in the new system
Check the domain controller system is accessiblefrom this system especially
(/sapmnt/trans) and should have read,write permissions
SAP user IDs:
SIDadm
SAPServiceSID
These IDs must be able to have full control of \sapmnt.
Thanks Rishi Abrol

When I try to open a PDF downloaded from Adobe DC I get an error message:Adobe Acrobat Reader DC could not open 'nrneph.2015.33.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email

When I try to download a PDF from Adobe DC, I get an error message: "Adobe Acrobat Reader DC could not open 'nrneph.2015.33.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)"
I am using a Macbook Pro, OSX 10.9.5, Safari browser. Previous versions of Adobe Acrobat have worked fine for years.
WGC

What's the name of the file you are attempting to open? Is it "ScreenFlow_4.5.2.dmg"? If it is the correct name then the message is correct and you are attempting to open a file with DMG files extension and not one with a PDF file extension. Adobe Reader opens PDF files an not any other file type.

Could not open error log file ''. Operating system error = 5(failed to retrieve text for this error. Reason: 15105).

Hello
When I try to start the SQl server service i get the following error:
Event id 17058
Could not open error log file ''. Operating system error = 5(failed to retrieve text for this error. Reason: 15105).
As a test I have made sure the errorlog file ,and the entire drive it is, has everyone full control permissions, but to no avail. Does anyone have any ideas to resolve this issue?
Thank you

Hi,
Try running:
SELECT SERVERPROPERTY('ErrorLogFileName')
Then verify that the account being used to run the SQL Server service account has access to the path output above. If possible, you could try logging onto the server with the same account used to run SQL Server then navigate to the errorlog folder.
Thanks,
Andrew Bainbridge
SQL Server DBA
Please click "Propose As Answer" if a post solves your problem, or "Vote As Helpful" if a post has been useful to you

SAPCAR: could not open for writing SAPCAR (error 28). Text file busy

Similar Messages

Maybe you are looking for