SAPCAR
Dear All,
I try to uncar the files it show the error "Bus Error(Core Dumped).
What is the problem?
xxxxxxx:irdadm 8% SAPCAR -xvf SAPEXE_159-20001001.SAR
SAPCAR: processing archive SAPEXE_159-20001001.SAR (version 2.01)
x ABAP.pad
x R3check
x R3ta
x R3trans
x SAPCAR
Bus Error (core dumped)
Regards,
Muthu
Hi,
whenever you are doing kernel upgrade and trying to uncar the files, then don't use SAPCAR of exe to extract it because when it uncar the kernel files then it gives new SAPCAR file which tried to overwrite present SAPCAR file but it is in use as you are using it.
So, it is not able to overwrite it and through errors.
So, copy the SAPCAR to some other directory and use it.
By the way path to new SAPCAR on service market place is:
Support Packaeges --> Entry by Application group --> Additional Components --> SAP Kernel --> <Select your kernel type > --> <select kernel version> ---> <select operationg systems> --> Database independent
Thanks sunny
Similar Messages
-
Let's make thinks easier... (SAPCAR download)
Downloaded NWD studio for 6.40 which was already a longwaiting story with 1000 MB with 2kb /sec but anyhow managed to get things onboard in SAR format.
I used the download centre and searched for SAPCAR.exe with results as showed below:
Question: What version do I need to take for a windows xp machine ?
SAPCAR 6.40
SAPCAR 6.40
AIX 32bit
AIX 64bit
HP-UX on IA64 64bit
HP-UX on PA-RISC 32bit
HP-UX on PA-RISC 64bit
Linux on IA32 32bit
Linux on IA64 64bit
Linux on Power 64bit
Linux on x86_64 64bit
Linux on zSeries 64bit
OS/400
Solaris on SPARC 64bit
TRU64 64bit
Windows Server on IA32 32bit
Windows Server on IA64 64bit
Windows Server on x64 64bit
z/OS 32bitHello Jaap,
I can confirm that for a server running Windows XP (32-bit), the correct SAPCAR file to use is the latest veresion from under 'Windows Server on IA32 32bit'. Note <a href="http://service.sap.com/sap/support/notes/892842">892842</a> has information about the SAPCAR 7.00 version being downwards compatible and note <a href="http://service.sap.com/sap/support/notes/212876">212876</a> contains general information.
Regards, Mark -
Hi..
I want to install JIDE19_0-10002804.SAR and I do have SAPCAR.CAR file. What is the procedure ? I am not able to find setup file from .sar file. please help.Hi,
SAPCAR is a application which can unzip the SAR files.
To do this:
1. Start CMD (Dos Console)
2. Place the SAR file and SAPCAR file in the same directory
3. In you dos console navigate to the above folder
4. Run command: <b>SAPCAR -xvf "*.sar"</b> or <b>SAPCAR -xvf JIDE19_0-10002804.sar</b>
This will extract the sar file, then go into the extracted dir and run setup file.
Greetings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers -
How to upgrade SAPCAR version?
Hi gurus,
I am trying to apply support packages using SPAM. But whenever i am
trying to upload the Support Packages through frontend i am getting
following error:
"CAR error message: SAPCAR: can not change date
for /usr/sap/trans/EPS/in/CSR0120031469_0034275.ATT"
I down;loaded again the support package but still getting the same
error.
I tried to uncar the same in the application server but i still got the
error while doing SAPCAR -xvf.
I have got a solution to upgrade the version of SAPCAR. but i dont know how to do it?
how to upgrade the version OF SAPCAR.
Thanks & Regards,
PriyaHi Priya..
You don't need downtime to change permissions...
You can run "/sapmnt/IRQ/exe/saproot.sh" script as ROOT user to set the permissions on Kernel Directory.
OR
Do as follow:
# chown -R irqadm:sapsys /sapmnt/IRQ/exe
# chmod -R 755 irqadm:sapsys /sapmnt/IRQ/exe
# chmod 4755 /sapmnt/IRQ/exe/saposcol
# chown root:sapsys /sapmnt/IRQ/exe/saposcol
After that don't forget to set the permissions of BRTools (brbackup, brrestore, brarchive, brspace etc.) according to below note.
[113747 - Permissions for DBA tools BRTools and SAPDBA.pdf|https://service.sap.com/sap/support/notes/113747]
Regards.
Rajesh Narkhede
Edited by: Rajesh Narkhede on May 14, 2010 3:51 PM -
SAPCAR: could not open for writing SAPCAR (error 28). Text file busy
Hi,
I´m trying to decompress this file( is for a kernel upgrade):
SAPEXE_15-10006264.SAR
And when I do SAPCAR u2013xvf SAPEXE_15-10006264.SAR, SAPCAR only decompress a few files and I´ve this error:
SAPCAR: could not open for writing SAPCAR (error 28). Text file busy
Instead when I decompress the SAPEXEDB_15-10006263.SAR, SAPCAR does this correctly. I´ve tried to download again the file but the error is always the same.Could someone help me?
Best regards,Hi,
Now, I´ve unpacked the files but when I do the file copy (in order to upgrade the kernel), I´ve these errors:
cp: cannot create /usr/sap/SMD/exe/jcontrol: Text file busy
cp: cannot create /usr/sap/SMD/exe/jlaunch: Text file busy
cp: cannot create /usr/sap/SMD/exe/libicudata.sl.30: Text file busy
cp: cannot create /usr/sap/SMD/exe/libicui18n.sl.30: Text file busy
cp: cannot create /usr/sap/SMD/exe/libicuuc.sl.30: Text file busy
cp: cannot create /usr/sap/SMD/exe/sapstart: Text file busy
cp: cannot create /usr/sap/SMD/exe/sapstartsrv: Text file busy
So could you help me?
Best regards, -
How to deploying DESIGNER_5-10000951.SAR with sapcar
Hi all,
I wish to regenerate the ITS stylesheets on an EP Portal implementation and need the sap_preview/sap_generate service to do so.
In accordance with the note on this topic I have downloaded the above files but am at a loss as to how/where to deploy it.
I assume I need to be in a specific directory on ITS to ensure that the files are unpacked into the correct place??
Many Thanks,
PaulHi Paul
copy the sar archive and sapcar to an empty directory. Extract the archive with
sapcar -xf DESIGNER_5-10000951.SAR
You will get three directories services, templates and webdocs.
Copy services\* to the services directory of your ITS installation, copy templates\* to templates directory of your ITS installation and webdocs to the location on your webserver.
Best regards,
Klaus -
Hi experts
Am trying to apply SPS to our EP 7.0 portal. So I downloaded the files from SMP and dumped them into /usr/sap/trans/EPS/in directory including the SAPCAR file. I renamed the SAPCAR_XXX(some file name ) to SAPCAR.
I am getting errors while trying to uncar some SAR files. SAPCAR itself resides in /EPS/in
SAPCAR -xvf SAPEXEDB_114-20000979.SAR
SAPCAR: processing archive /usr/sap/trans/EPS/in/SAPEXEDB_114-20000979.SAR (version 2.01)
x R3ldctl
SAPCAR: could not open for writing R3ldctl (error 28). Permission denied
If i try it from EPS directory
usr/sap/trans/EPS >> SAPCAR -xvf /usr/sap/trans/EPS/in/SAPEXEDB_114-20000979.SAR
SAPCAR: processing archive /usr/sap/trans/EPS/in/SAPEXEDB_114-20000979.SAR (version 2.01)
x R3ldctl
SAPCAR: error in GetEntryData(); unknown block type (error 100). No such file or directory
All the SAR files have 777 permision.
Please advise .Hi,
Am trying to apply SPS to our EP 7.0 portal
you are trying to apply support package on EP 7.0 for that you should use JSPM.
SAPEXEDB_114-20000979.SAR is a kernel file. why are you extract it in /eps/in ???
SAPCAR -xvf SAPEXEDB_114-20000979.SAR
SAPCAR: processing archive /usr/sap/trans/EPS/in/SAPEXEDB_114-20000979.SAR (version 2.01)
x R3ldctl
SAPCAR: could not open for writing R3ldctl (error 28). Permission denied
for this error check sap not Note 130683 - SAPCAR, CAR can't query current working directory
regards,
kaushal -
The correct SAPCAR.EXE Version (Win Server 2003 & MSQL DB)
Hi there,
I am getting a stuped error (cant open file. not a win32 file...etc).
I want to install supportpackages and of cours first the SAPAM ( SAPKD64038 SPAM/SAINT Update - Version 640/0038).
1) My problem when use: SAPCAR -xvf <file name> it does work. And I think I have the wrong SAPCAR.
Where can I have the right one if I have: MS SQL, windows Server 2003.
All the SAPCAR I dowloaded does not work.
2) Where can I find the right: SAP Kernel (exe- Programs)?
Thanks in advance
Best regards
HanseAtikHi,
its stuped but its.
I just downloaded the files again and tried but git the same problem. I just tried to update the SPAM first.
The file I downloaded are:
000001 View content info Create side effects report Add to download basket SAPKD64036 SPAM/SAINT Update - Version 640/0036
Support Package
000002 View content info Create side effects report Add to download basket SAPKD64038 SPAM/SAINT Update - Version 640/0038
When I use SAPCAR on command line I get the following:
SAPCAR -xvf <filename>.CAR -
> processing archive <filename>.CAR ....
format error in header
But the system is win32. Should be this a problem?
Best regards
Rahim
Edited by: Hanse Atik on Sep 20, 2010 1:35 PM -
Hi guys ,
Iam working on SAP 4.6C, Oracle 9.2.0.5, Windows 2003 server.
I want to do a Kernel Upgrade to my system as it hasnt been done since long time. Our SAP Kernel Release 46D with Support Package Level 1674.
But i heard that before performing the Kernel Upgrade i need to have the latest SAPCAR.exe. I have searched the Marketplace and found this version SAPCAR_4-20000900.exe.
When i checked my SAPCAR version it is showing SAPCAR 2.0. I Have checked the version through SAPCAR -V in RUN command.
So if am correct till now then please anyone let me know how to update my SAPCAR version first please let me list the details steps to do this.
Waiting for replies from alllll
RegardsHi Mohammed,
Yeah i think you are right, but before doing it back up the exe directory first.It will help you when you face any problem in the future.If you operating system is 32 bit on intel then its is right.
Reward points if helpfull.
Regards,
Vamshi. -
SAPCAR: can not set permissions for /EPS/in/SIGNATURE.SMF
We are running SUM 1.0 SP10 on IBM i with V7R1 to put EHP6 and SP's on an ERP 6.0 system. Phase PREP_PRE_CHECK/SCANDIR_EPS0 repeatedly ends with multiple errors that SAPCAR: can not set permissions for /EPS/in/SIGNATURE.SMF file. We tried increasing the sidADM and R3GROUP authority to the file, but it changes them back and ends with a different number of errors each time, see example:
SAPup> Starting subprocess with PID 4295601 in phase 'SCANDIR_EPS0' at 20140319101619
ENV: DIR_LIBRARY=/usr/sap/Y60/SUM/abap/bin
ENV: ILE_PATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SYS/exe/run:/usr/bin:.
ENV: LIBPATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SUM/jvm/jre/lib/ppc64/server:/usr/sap/Y60/SUM/jvm/jre/lib/ppc64:/usr/sap/Y60/SUM/jvm/jre/../lib/ppc64:/usr/sap/Y60/SUM/jvm/jre/lib/ppc64/jli:/usr/sap/Y60/SUM/jvm/jre/../lib/ppc64/jli:/usr/sap/Y60/SYS/exe/run:/usr/sap/Y60/hdbclient:/sapdb/clients/Y60/lib/lib64:/sapdb/clients/Y60/lib:/sapdb/programs/lib/lib64:/sapdb/programs/lib
ENV: PASE_LANG=en_US
ENV: PASE_LC__FASTMSG=true
ENV: PASE_LIBPATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SYS/exe/run:/usr/sap/Y60/hdbclient:/sapdb/clients/Y60/lib/lib64:/sapdb/clients/Y60/lib:/sapdb/programs/lib/lib64:/sapdb/programs/lib
ENV: PASE_LOCPATH=/usr/lib/nls/loc
ENV: PASE_NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat:/usr/lib/nls/msg/en_US/%N:/usr/lib/nls/msg/en_US/%N.cat
ENV: PASE_PATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SYS/exe/run:/QOpenSys/usr/bin:/usr/ccs/bin:/QOpenSys/usr/bin/X11:/usr/sbin:/usr/bin:.:/usr/sap/Y60/hdbclient:/sapdb/clients/Y60/bin:/sapdb/programs/bin
ENV: PASE_STDIO_ISATTY=N
ENV: PASE_THREAD_ATTACH=Y
ENV: PASE_TZ=<EST>5<EDT>,M3.2.0,M11.1.0
ENV: PASE_USRGRP_LIMITED=
ENV: PATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SYS/exe/run:/QOpenSys/usr/bin:/usr/ccs/bin:/QOpenSys/usr/bin/X11:/usr/sbin:/usr/bin:.:/usr/sap/Y60/hdbclient:/sapdb/clients/Y60/bin:/sapdb/programs/bin
ENV: SAPSYSTEMNAME=Y60
ENV: dbms_type=db4
ENV: dbs_db4_schema=R3Y60DATA
ENV: ILE_DIR_LIBRARY=/usr/sap/Y60/SUM/abap/bin
ENV: PASE_DIR_LIBRARY=/usr/sap/Y60/SUM/abap/bin
ENV: DIR_LIBRARY_RMT=/usr/sap/Y60/SUM/abap/bin
ENV: ILE_DIR_LIBRARY_RMT=/usr/sap/Y60/SUM/abap/bin
ENV: PASE_DIR_LIBRARY_RMT=/usr/sap/Y60/SUM/abap/bin
ENV: ILE_LIBPATH=/usr/sap/Y60/SUM/abap/bin
EXECUTING /usr/sap/Y60/SUM/abap/bin/SAPCAR -flat -R /usr/sap/transD60/EPS/in -xvf /tmp/NO_SAVE/ERP_EHP6_Download/K-60609INECCDIMP.SAR
SAPCAR: processing archive /tmp/NO_SAVE/ERP_EHP6_Download/K-60609INECCDIMP.SAR (version 2.01)
x CSR0120031469_0080800.PAT
x SIGNATURE.SMF
SAPCAR: can not set permissions for /usr/sap/transD60/EPS/in/SIGNATURE.SMF (error 13). No such file or directory
SAPup> Process with PID 4295601 terminated with status 13 at 20140319101623!
Has anyone lse exprienced this and can share a fix?
Thank you,
-MargieHi,
We had the same issue, and in my opinion it is caused by the parallelisation of sapcar during SUM phase PREP_PRE_CHECK/SCANDIR_EPS0
I did see several parallel SAPCAR jobs running during this phase.
So what happens when one job extracts SIGNATURE.SMF at the same time another job tries to finalize its extraction by setting the permissions for /usr/sap/trans/EPS/in/SIGNATURE.SMF?
It can happen that permissions are being set at the same time another sapcar yust deletes this file to begin extracting.
Since we had 146 SAR archives that needed to be extracted, a retry allways ended up in 4 to 12 conflicts.
What did do the trick was adding
/sapcar/extrcact_parallel = 0
to the file
../SUM/abap/bin/SAPup.par
Just as Christoph Langer suggested.
We had to restart the whole phase, a repeat was not enough to solve the problem. -
Dear Friends,
I am trying to update my brtools patch level.I download DBATL640O92_48-20000198.SAR file
.but when i am trying to extract this file ,i get a message
+ FORMAT ERROR IN HEADER+
After that i update my SAPCAR tool, than it gives
an error
program is to big
But i have more than 30 G.B free space
Thanks & Regards
GopalHi Jacob,
I download the file succesfully. And i have also Update a my SAPCAR tool. Now i am trying to extract the file DBATL640O92_48-20000198.SAR than it gives a error
+tegaprd:prdadm 6> SAPCAR -xvf /usr/sap/tmp/DBATL640O92_48-20000198.SAR
SAPCAR: error opening /usr/sap/tmp/DBATL640O92_48-20000198.SAR
SAPCAR: 0 file(s) extracted+
I placed this file in usr/sap/tmp than now tell me that path is given by me is wrong.
I am giving a path.
#tegaprd:prdadm 6>cd /usr/sap/PRD/SYS/exe/run
tegaprd:prdadm 6>SAPCAR -xvf /usr/sap/tmp/DBATL640O92_48-20000198.SAR
Please tell me where am i wrong.
i am working on AIX operating System
Thanks & Regards
gopal
Edited by: gopal kaushik on May 6, 2008 7:35 AM -
Hello!
I try to run SAPCAR on Solaris SPARC, but it works very slowly.
According to note 212876 I`ve deleted extension in SAPCAR<.exe - was killed>. After this action I start SAPCAR, but it takes a lot of time for displaying standard screen (create a new archive: SAPCAR -c[vir][f archive] [-P]....)
When I run command <i> file SAPCAR</i> I get information very fast:
<b>SAPCAR: ELF 64-bit MSB executable SPARCV9 Version 1, dynamically linked, not stripped</b>
But if I run command <i>ldd SAPCAR</i> it work like when I start SAPCAR. ldd shows me:
<b>libdl.so.1 => /usr/lib/sparcv9/libdl.so.1
libnsl.so.1 => /usr/lib/sparcv9/libnsl.so.1
libsocket.so.1 => /usr/lib/sparcv9/libsocket.so.1
libm.so.1 => /usr/lib/sparcv9/libm.so.1
libCstd.so.1 => /usr/lib/sparcv9/libCstd.so.1
libCrun.so.1 => /usr/lib/sparcv9/libCrun.so.1
libw.so.1 => /usr/lib/sparcv9/libw.so.1
libc.so.1 => /usr/lib/sparcv9/libc.so.1
libmp.so.2 => /lib/64/libmp.so.2
libmd.so.1 => /lib/64/libmd.so.1
libscf.so.1 => /lib/64/libscf.so.1
libdoor.so.1 => /lib/64/libdoor.so.1
libuutil.so.1 => /lib/64/libuutil.so.1
libgen.so.1 => /lib/64/libgen.so.1
libm.so.2 => /lib/64/libm.so.2
/platform/SUNW,Sun-Fire-480R/lib/sparcv9/libc_psr.so.1
/platform/SUNW,Sun-Fire-480R/lib/sparcv9/libmd_psr.so.1</b>
Does anybody has the same problem?Well... I executed vmstat command in parallel with SAPCAR's "work"...
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr s1 sd sd sd in sy cs us sy id
0 0 0 32414176 3210512 5 12 12 4 4 0 0 2073 -1 0 0 357 131 270 0 0 99
0 0 0 32391200 3384136 9 19 0 0 0 0 0 0 0 0 0 288 118 215 0 0 100
0 0 0 32391200 3384192 0 0 0 0 0 0 0 0 0 0 0 367 128 234 0 0 100
0 0 0 32391200 3384192 0 0 0 0 0 0 0 0 0 0 0 284 80 200 0 0 100
0 0 0 32391200 3384192 0 0 0 0 0 0 0 0 0 0 0 291 84 216 0 0 100
0 0 0 32391200 3384192 0 0 0 0 0 0 0 0 0 0 0 284 149 198 0 0 99
0 0 0 32391200 3384192 0 0 0 0 0 0 0 0 0 0 0 312 114 223 0 0 100
0 0 0 32391200 3384192 0 0 0 0 0 0 0 0 0 0 0 297 93 207 0 0 100
0 0 0 32391200 3384192 0 0 0 0 0 0 0 0 0 0 0 287 91 218 0 0 100
0 0 0 32391200 3384192 0 0 0 0 0 0 0 0 0 0 0 291 82 220 0 0 100
0 0 0 32391200 3384192 0 0 0 0 0 0 0 0 0 0 0 293 87 216 0 0 100
0 0 0 32391200 3384192 0 0 0 0 0 0 0 0 0 0 0 300 105 219 0 9 91
0 0 0 32391200 3384192 0 0 0 0 0 0 0 0 0 0 0 333 109 234 0 0 100
0 0 0 32391200 3384192 0 0 0 0 0 0 0 0 0 0 0 282 85 202 0 0 100
0 0 0 32391200 3384192 0 0 0 0 0 0 0 0 0 0 0 289 94 208 0 0 100
0 0 0 32391200 3384192 0 0 0 0 0 0 0 0 0 0 0 276 148 202 0 0 100
0 0 0 32391200 3384192 0 0 0 0 0 0 0 0 0 0 0 294 99 218 0 0 100
0 0 0 32391200 3384192 0 0 0 0 0 0 0 0 0 0 0 283 81 197 0 0 100 -
hello everyone
i am facing the problem in sapcar please provide me the solution
SAPCAR -xvf DBATL700O10_48-20001000.SAR
SAPCAR: processing archive DBATL700O10_48-20001000.SAR (version 2.01)
x brarchive
SAPCAR: could not open for writing brarchive (error 28). Permission denied
thanksHi
First take backup of the existing run folder to oldrun
now, copy the existing SAPCAR file to another location like /home/tmp/SAPCAR
also remane saposcol to saposcol.tmpold
now, extract the SAPEXE file on /home/tmp/SAPCAR from the /usr/sap/<SID>/SYS/exe/run directory.
I hope this helps..
Cheers -
SPS3 installer failed with 'SAPCAR: Permission denied'
When running unified installer (Rev 20):
hana-rep:/HANA/repository/HANA1.0-SPS03/51041779/DATA_UNITS/HANA_IM_LINUX__X86_64 # ./setup.sh /tmp/hanainst/ /tmp/setuphana.slmodel
I am getting the following error:
[20111123105848] [ 65% completed] Working on: 'SUM' ... --> STARTED
[20111123105848] [ 66% completed] Working on: 'SUM4HANA' ... --> RUNNING.../
Error when fixing issue The content reference SUM4HANA is not deployed
Return Code:1 ERROR
Could not finish execution.
Finished with status ERROR. Message is: Could not finish execution.
Installer failed.
and when looking into log:
hana-rep:/tmp/hanainst/log # tail install.log
2011/11/23 10:58:48 [INFO] [ 61% completed] Working on: 'HDB Client' ... |
2011/11/23 10:58:48 [INFO] [ 61% completed] Working on: 'Sum4Hana Installer' ... |
2011/11/23 10:58:48 [INFO] [ 62% completed] Working on: 'HNA' ... |
2011/11/23 10:58:48 [INFO] [ 63% completed] Working on: 'SYS' ... |
2011/11/23 10:58:48 [INFO] [ 64% completed] Working on: 'SYS' ... |
2011/11/23 10:58:48 [INFO] [ 64% completed] Working on: 'HNA' ... |
2011/11/23 10:58:48 [INFO] [ 65% completed] Working on: 'SUM' ... |
2011/11/23 10:58:48 [INFO] [ 66% completed] Working on: 'SUM4HANA' ... |
2011/11/23 10:58:52 [ERROR] /HANA/repository/HANA1.0-SPS03/51041779/DATA_UNITS/HANA_IM_LINUX__X86_64/SAPCAR: Permission denied.|
2011/11/23 10:58:52 [ERROR] Finished with status ERROR. Message is: Could not finish execution.|
I checked the SAPCAR:
hana-rep:/HANA/repository/HANA1.0-SPS03/51041779/DATA_UNITS/HANA_IM_LINUX__X86_64 # ll /HANA/repository/HANA1.0-SPS03/51041779/DATA_UNITS/HANA_IM_LINUX__X86_64/SAPCAR
-r-xr--r-- 1 root root 4264120 Oct 31 20:26 /HANA/repository/HANA1.0-SPS03/51041779/DATA_UNITS/HANA_IM_LINUX__X86_64/SAPCAR
It looks good for me, as I am 'root' and have permissions to execute it.
Any ideas?
Thanks,
-VitaliyI looked into glf file in logs, and it seems that <sid>adm is installing SUM:
EXTRACT_USER="hnaadm"
USE_LST_FILE="0"
EXTRACT_LST_FILE="-A $TMP_DIR/$LST_FILE"
if [ $USE_LST_FILE -eq 0 ]
then
su - $EXTRACT_USER -c "$SAPCAR_DIRECTORY/$SAPCAR_EXECUTABLE -xvf $FILE_TO_EXTRACT -R $TARGET_DIRECTORY"
rc=$?
I changed the permissions on SAPCAR for everyone to execute and re-starting setup.sh after clearing work directory. -
am trying to configure Standalone Database on DB2 server (z/OS) and I downloaded the ccmagent from the following path:
SAP Support Packages and Patches
Entry by Application Group
SAP NetWeaver
SAP NetWeaver
SAP NetWeaver 04
Entry by Component
Application Server ABAP
SAP KERNEL 6.40 32-BIT
z/OS 32bit
Database independent
When I try to unpack the ccmagent an error is generated:
./SAPCAR FSUM7329 <(COMMAND) AND > (COMMAND) not implemented
does anyone know about that?
tks a lotHi,
Does a simplier ./SAPCAR <package> -xvf works?
Br,
Javier -
SAPCAR: checksum error in disp+work.exe (error 12)
Hi All,
While extracting a SAR file using SAPCAR i am getting following error
SAPCAR: checksum error in disp+work.exe (error 12)
Please could anyone let me know the cause of such error.
Thanks in advance.
YatinHi Mark,
I am getting this error while Installing the BW 3.5 on Windows 2003 server. This error occurs during Extracting SAP Kernel archives. (SAPEXE.SAR).
So i tried to manually extract SAPEXE.SAR file. While doing this i am getting same error.
Please advice.
Thanks,
Yatin
Maybe you are looking for
-
Question regarding the date in MARC for a daily movement report
Hi, I have a requirement, where i need to create a report, based on the selection screen parameters for <u>purchasing group</u> and <u>date</u> (the default is 1 minus the current date.) The report is used to view the daily movement, relating to the
-
HT1338 How can I use Turbo TAx with OS X 10.5.8?
I have ued Turbo TAx for years. This year the TT cd version is not compatible wit MAC OS X 10.5.8. IS there any way I can upgrade so I can use Turbo TAx. I fear I am finding planned obsolescence here.
-
Dear Friends, iam using snackr open source to evaluate and learn flex. i know Flash3 & AIR very well. iam New to Flex.iam trying to use trace or alert.show command in order to debug the coding. it is not giving out put. even it is not going to that l
-
What does this ABAP code do?
Hi, I came across this ABAP code and I'd like to know what the asterisk (*) before the variable names does. *mkpf = mkpf. *mseg-lgort = mseg-lgort. *ladr = ladr. save_mkpf = *mkpf-usnam. save_mblnr = *mkpf-mblnr. save_budat = *mkpf-budat.
-
Dynamically switch phisical data source
Hi, Is it possible to dynamically (during one session) change connection pool data source parameter in OBIEE 11g? In my case there are 4 OLAP cubes with the same structure dedicated for different regions. I like to change data source standing behind