SAPCCM4X.03 Windows Service stops after 3 sec.

Hi!
I would like to set up the SAPCCM4X agent on the satellite system.
The installation with the commando >sapccm4x -R pf=... endes without any errors.
The problem is that the appropriate SAPCCM4X.03 Windows Service stops after 3 sec.
The output on the CMD console is:
INFO: trying to register service SAPCCM4X.03 at Windows Service Control Manager
starttype of service:             manual/[auto] :
DomainName\UserName or [<LocalSystem account>] :
INFO: Agent is running (no actual pid, but actual shared memory!)
WARNING: Service SAPCCM4X.03 already stopped. But agent is running!
WARNING: The following service is registered but could not be started
SAPCCM4X.03
(command ["E:\usr\sap\SC3\SYS\exe\run\sapccm4x.exe" -Service
pf=E:\usr\sap\SC3\SYS\profile\SC3_DVEBMGS03_VMSAP01]   user <LocalSystem account>)
INFO: Updated config file E:\usr\sap\SC3\DVEBMGS03\log\sapccm4x\csmconf.
EXITING with code 0
How can I solve this problem?
Thank you
Ju00FCrgen

Hello Jürgen,
WARNING: Service SAPCCM4X.03 already stopped. But agent is running!
you could try to clean up the part of the shared memory used by the agent:
sapccm4x pf=<instance profile> -initshm
Maybe the agent starts afterwards.
Regards, Michael

Similar Messages

Error message: Host process for windows services stopped

I recently had to install a new hard drive into my laptop. I am running windows vista and have installed all updated drivers. After installing itunes and uploading my backed up library, I went to play a song and I got the error "host process for windows services stopped working and was closed." Movies play fine. I have searched but have not found anything. Any help would be greatly appreciated.

Q I just upgraded to a new mobo and CPU, the EVGA X58 SLi and i7 920, and this issue still persists! That means it is either the sound card or Steam. The drivers on the CD have no issues, only the newer ones do. So by deduction there is something wrong with the new drivers, but I need them to not BSOD in OpenAL!

A135-S4527 Host Process for Windows Services stopped...

I have started getting a Windows error: Host Process for Windows Services stopped working and was closed. Laptop runs fine except my network connection says Connection Status: Unknown The service to detect this status is turned off and McAfee stopped working. Can't run any of the MS tools either. I am suspicous of conficker e but don't know how to detect or remove it. Have seen the b variant on an XP machine at work, but the tools we used on it don't work on Vista.
I am running Vista Home Edition (came on Laptop) upgraded to SP1 with auto-updates on. McAfee was also set for auto-updates and nightly full scans, active e-mail and internet scanning. No recent software downloads except for updates.
Have been having the issue since about April 28. Tried to restore but no dates exist past May 5. Tried the F8 Startup recovery no problems found. Have tried restarting services but they quickly stop again. Uninstalled McAfee and tried AVG. It allowed defintion updates and I scanned all files. No viruses, trojans or malware detected.
Any suggestions? I have a tasklstserv file I can copy and paste if it will help.

That's a bad-sector event. At a command prompt (cmd.exe), run chkdsk /r.
Event ID 7 Source Disk
But it doesn't seem likely that's the cause of the message. When you get another one, note the time and check the Application and System logs for entries at that exact time.
Thanks for the detailed information.
What virus protection do you use?
-Jerry

Why is Logic Express 8 keep stopping after 2 sec, every time I press play? Help!!!

Why is Logic Express 8 keep stopping after 2 sec, every time I press play? Help!!!

Its likely to be caused by Ozone5.. many people have reported that plugin is currently quite unstable and are awaiting updates from izotope to fix the problem... No ETA has been given by izotope for the fix however...
Also several of your plugins are out of date (Zebra2, Clariphonic, Ozone itself.. to name but a few,)
Finally, you are running an older version of Logic Pro X (10.0.3)...and I would normally suggest you update to the latest version but... if you have a USB2 audio interface do not update to 10.0.5 at this time.... unless you know it will work correctly with the new version of LPX.

Videos stop after 10 sec. How to remedy

Just got Iphone 4s the past Friday. Videos start then stop after 10 sec. Tap play then stops after 1 sec. Will not play more than 1 sec. Solutions?

It seems that the work-around for this is to change the compatability mode to "Vista". Right click on shortcut, select properties, then the Compatability tab and enable Vista compatability.
Don't know why this was happening but this seems to fix it.

Time Capsule refuses to download upgrade? Stops after 5 sec....?

Cannot backup to my Time Capsule.
Time Capsule requiers upgrade, but refuses to download it?? Stops after 5 sec. and blames Air Port tool???

What model TC is it? A1xxx from the base please.
How is it setup in the network?
What kind of internet do you have?
I would say any TC older than 3years do not upgrade firmware.. it will not solve your problem of not being able to backup anyway.
Pull the TC out of the network and do a factory reset. Use connection by ethenet, to redo the setup.. if at all possible setup and connect by ethernet whilst you do the backup.
But need more info to help further.

Starting OEM Windows Service only after database is ready

I have a Windows Service program (written in vb.net) that accesses an Oracle database via the Oracle ODBC driver. It runs fine as long as the database comes up first. In some installations, however, the Oracle system is not ready to connect when Windows auto-starts my service.
I have tried using both the database service name and the TNS_Listener... as a value in a DependsOnService key in the registry for my service, but it seems to have no effect. Judging by the event logs, Oracle continues to spin out "processes" for something over 30 seconds, which appear after my service is started regardless of what I do with the DependsOnService parameter.
How can I make Windows auto-start my service only after Oracle is ready?

Sure, although "net start" is a Windows thing, not an Oracle thing. Here is the contents of my startup.cmd file.
net start "OracleOraDb10g_home1TNSListener"
net start "OracleServicePROD"
net start "OracleDBConsoleprod"
net start "OracleCSService"
net start "OracleOraDb10g_home1iSQL*Plus"
pause
The thing in quotes is the service name found in the Windows Services panel. In order to use this method you should set the services you wish to control as Manual startup (instad of Automatic). You can do that by right clicking on a service name/Properties/Startup Type.
To do a shutdown, I reverse the order of the above script and of course change the starts to stops.

CFMX windows services stopping

Hi,
Has anyone else run into the situation where the CFMX 7
ColdFusion services are stopping randomly?
Set-up - Server 2000, CFMX 7, IIS 5
On checking the windows services i'm finding that the
services are failing which require a restart, this holds up for a
while then the services stops again. On restarting i'm then
sometimes receiving the 'service specific error 2', strangely
enough not all the time though, i did set the services to auto
restart on failure, this however does not seem to start the stopped
service, is there a set order they should be starting in? If there
is a service dependency can be set, any ideas?
This has also been coupled with a license key error in the
logs saying the server may be out of compliance, we have checked
all our license keys they are all valid, bit stumped on that one.
Any ideas & help greatly appreciated...

That's a fairly generic error message - have you dug through
the JRun (runtime) logs, and/or the system event logs?
Some links that may help:
ColdFusion MX: Service startup fails with service-specific
error 2 following a service shutdown or restart
http://www.adobe.com/go/tn_18903
ColdFusion MX 6.1: Service startup fails with
service-specific error 2 following a system reboot
http://www.bpurcell.org/blog/index.cfm?mode=entry&entry=854

ZENworks Agent Service stops after deploying 10.3.3 agent.

Hi,
Yesterday i patched our three ZCM-servers (Sles 11) with 10.3.3. I then deployed the 10.3.3 agent to some computers in the IT-department. ZCC shows that the deployment were successful. The problem is that you can not log on to the ZONE from many of these computers. The Novell ZENworks Agent Service stops. I get the following in the Application Windows Log on a Windows 7 64-bit client:
Faulting application name: ZenworksWindowsService.exe, version: 10.3.3.3582, time stamp: 0x4d654308
Faulting module name: ntdll.dll, version: 6.1.7600.16695, time stamp: 0x4cc7b325
Exception code: 0xc0000374
Fault offset: 0x00000000000c6ab2
Faulting process id: 0x3f8
Faulting application start time: 0x01cbe3a9dd16f0fc
Faulting application path: C:\Program Files (x86)\Novell\ZENworks\bin\ZenworksWindowsService.e xe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: 019eaf5e-4f9e-11e0-986f-005056b925a1
Can anyone help me with this problem?
John Hallberg
Jonkoping University

I would try removing all versions of .NET and then reinstalling the
latest 3.5 SP1 version to see if that helps, since the Agent relies on .NET
If that does not help, I would recommend getting an SR created so the
dump could be analyzed.
On 3/16/2011 5:06 AM, hajo68 wrote:
>
> Hi,
>
> Yesterday i patched our three ZCM-servers (Sles 11) with 10.3.3. I then
> deployed the 10.3.3 agent to some computers in the IT-department. ZCC
> shows that the deployment were successful. The problem is that you can
> not log on to the ZONE from many of these computers. The Novell ZENworks
> Agent Service stops. I get the following in the Application Windows Log
> on a Windows 7 64-bit client:
>
>
> Faulting application name: ZenworksWindowsService.exe, version:
> 10.3.3.3582, time stamp: 0x4d654308
> Faulting module name: ntdll.dll, version: 6.1.7600.16695, time stamp:
> 0x4cc7b325
> Exception code: 0xc0000374
> Fault offset: 0x00000000000c6ab2
> Faulting process id: 0x3f8
> Faulting application start time: 0x01cbe3a9dd16f0fc
> Faulting application path: C:\Program Files
> (x86)\Novell\ZENworks\bin\ZenworksWindowsService.e xe
> Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
> Report Id: 019eaf5e-4f9e-11e0-986f-005056b925a1
>
> Can anyone help me with this problem?
>
> John Hallberg
> Jonkoping University
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

My shuffle stops after 30 secs of playing

My shuffle connects and syncs to itunes ok and is completely charged, but when I start playing it, it turns off after 20 to 30 secs. If I restart it it'll play the next 30 secs and stops again. It won't play continuously. If reset and restored it. I have the latest versions of Itunes and even ran diagnostics but all appears to be ok except when I play it because it'll stop after 20-30 secs and won't restart until I press play again. Any tips?

Have you made sure the headphones were plugged in all the way, meaning no silver from the headphone's plug was still showing?
If nothing else, it may be time to take the iPod into your local Apple Store/Genius bar to have them take a look at it. Could be a hardware malfunction.
B-rock

IMAP + POP service stops after startup. Cannot configure params in shell

Hello,
Just bought a MacMini, with 10.6.4 server. However, I cannot make POP nor IMAP services to work. They stop after startup. SMTP works fine though.
How do I troubleshoot? The graphical 'Mail Configure Service...' does not make the IMAP service start.
I cannot change the mail parameters via command line.
For example:
$ sudo serveradmin set mail:imap:enable_imap = no /yes is ignored.

By manually reseting the variables in the file, mail started with IMAP and POP running,
I trust this is a bug in the serveradmin .app
Here is the garbled file:
----sslcertfile variable could not be reset by serveradmin, it apparently appended data instead of overwriting:
# Note: This key is managed by Server Admin. See above before making changes
sslcertfile = /etc/certificates/MacMini.sip.com.gr.8017D0CBEBF8CC56CF776F2E03D8E3849C9F743A.c ert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem SSL Server.EBBA9E02804AECB53A9C44F983024BEDE1397CA8.cert.pem Ltd (SSL client).7BA20201B838A758AA227335E7FD87EB80F53DEC.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem Ltd (SSL client).7BA20201B838A758AA227335E7FD87EB80F53DEC.cert.pem Ltd (SSL client).7BA20201B838A758AA227335E7FD87EB80F53DEC.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem Ltd (SSL client).7BA20201B838A758AA227335E7FD87EB80F53DEC.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem SSL Server.EBBA9E02804AECB53A9C44F983024BEDE1397CA8.cert.pem Ltd (SSL client).7BA20201B838A758AA227335E7FD87EB80F53DEC.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem SSL Server.EBBA9E02804AECB53A9C44F983024BEDE1397CA8.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.cert.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.cert.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.cert.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.cert.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.cert.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem
# Note: This key is managed by Server Admin. See above before making changes
sslkeyfile = /etc/certificates/MacMini.sip.com.gr.8017D0CBEBF8CC56CF776F2E03D8E3849C9F743A.k ey.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem SSL Server.EBBA9E02804AECB53A9C44F983024BEDE1397CA8.key.pem Ltd (SSL client).7BA20201B838A758AA227335E7FD87EB80F53DEC.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem Ltd (SSL client).7BA20201B838A758AA227335E7FD87EB80F53DEC.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem SSL Server.EBBA9E02804AECB53A9C44F983024BEDE1397CA8.key.pem Ltd (SSL client).7BA20201B838A758AA227335E7FD87EB80F53DEC.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem SSL Server.EBBA9E02804AECB53A9C44F983024BEDE1397CA8.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.key.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.key.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.key.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.key.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.key.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem
# Note: This key is managed by Server Admin. See above before making changes
sslcafile = /etc/certificates/MacMini.sip.com.gr.8017D0CBEBF8CC56CF776F2E03D8E3849C9F743A.c hain.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.chain.pem SSL Server.EBBA9E02804AECB53A9C44F983024BE.....

MDM Server Window Service failed after adding server password

After adding MDM server password, MDM server window service can't start up. We have to use clix command to start the server. Is there anyway to fix window service problem?

Hi Jean,
From the version number it sounds like you're using version 5.5 SP4, right? The Console application was significantly changed in SP5 and you would no longer see the locked server icon... If you unmount the server from the Console, and re-mount it, isn't there an option on the context menu for the tree (right-click on the server node) to provide the password? Did you try "Connect to Server" or "Start Server" on this context menu?
Thanks... I don't know if I can help you with your problem, but I will try!
-Cleopatra
Message was edited by: Author - found the option on the context menu to provide the password to the server
Cleopatra Von Ludwig
Message was edited by:
Cleopatra Von Ludwig

Active directory domain services stopped after removing routing and remote access role

Hello everyone;;
I am in deep trouble.. I did install routing and remote access and then lost connection to the server remotely. Then I connected a monitor to the server and removed the role... then it asked me to restart the server . After logging back in I found
all my active directory service has gone... I can see red cross on active directory domain services.. Also I am able to ping other pcs but other pcs cannot ping my server..
However when I go into the active directory services, it shows all services are running except file replication service. I have tried to start that service but it give error 1053 error..
My server in between loses LAN connection... I dont know what is going on.. Please help!!!
My server is win 2008 R2 ser pack 1
Only one DC....
Has fixed ip,
no DNS server running..

Hi,
The File Replication Service Start Error 1053 error can be caused by damaged Windows system files. Corrupted system files entries can threaten the well-being of your computer. Many events can result in creating system file errors.
Please refer to the articles below to troubleshoot the issue:
File Replication Service Start Error 1053
http://repairerrors.net/file-replication-service-start-error-1053.html
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Creative Cloud stops after 10 sec

Hi,
I like to update Lightroom and Photoshop, so I start Creative Cloud and after ± 10 seconds Creative Cloud stops without any message whatsoever.
So I tried to uninstall Creative Cloud, but the uninstaller progress bar is standing still even after 30 minutes. The process manager showed the uninstaller was hanging
So I repaired the filesystem permissions, an still the uninstaller was hanging
So I ran the CC Cleaner Tool only for Creative Cloud removal
After that I reinstalled a fresh Application Manager, which downloaded and installed the new Creative Cloud
But the problem is still not solved and Creative Cloud still shuts down (crashes) after ± 10 seconds.
Please what can I do? during my trial perod I had no problem whatsoever, but sinds I start paying this is happening.
Specs:
Creative Cloud subsription
MAC OSX 10.9.4

The install of prem. Pro,,,it did install but no desktop icon and none of the icons in cloud work..I was able to go into C drive then into the prem.pro folder,found the icon for the application and that opened the program..It ran ok..I have found no way to reinstall anything from cloud without first removing said program.Thats what I am doing now,uninstalling prem.pro and cloud in hopes of a clean install will fix the issues.Not going to hold my breath tho as I really don't think they have fixed the bug yet.
On the plus side LightRoom did install with a working icon.
PS cc 2014 did not put out a startup icon but as with prem.pro was able to open by going into the file folder.
I am running Win8 64 bit with a 6 core cpu
Modern Tech.....Isn't great when it works...But when it doesn't...Grrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr LOL
Will post the results of reinstall.
Note....CLOUD STILL claims Pre Pro is there..Guess will have to remove cloud also and reload it before I can get anywhere. grrrrrrrrrrrrrrrr

Sharing libraries on home windows network stopped after upgrade to 7.2.0

Up until I upgraded to 7.2.0 I had no problems sharing my iTunes libraries across my windows desktop & 2 windows laptops. Now I can no longer share. Tried deselecting & selecting the share option. Tried pinging each machine. Tried turning firewalls on and off. Nothing. Anyone else had this issue? All machines are windows XP.

disovered conflict with vpn software. Unistalled vpn software & itunes shared library reappeared on all other PCs

SAPCCM4X.03 Windows Service stops after 3 sec.

Similar Messages

Maybe you are looking for