Sapccm4x error in tcp rfc connection
Hi all,
I am configuring QAS system (Non Unicode Netweaver 04s & abap stack only) with Solution Manager. I have installed the sapccm4x agent. The agent installation finishes sucessfully with return code 0. The Agent service is started on QAS system.
But it doesnt work. Agent remains in status Shutdown. Even if we try to bring it online, it gives error in RFC communication.
In RZ21 -> Topology -> Agents for Local System, my system status is SHUTDOWN and all the RFC's created by registration (such as N3STAT.<host>.<instance_number> type TCP/IP) return the error program <host>.n3stat.<instance_number> not registered.
The trace file in CEN says:
ABAP Programm: SAPLSALF (Transaction: )
User: CSMREG (Client: 200)
Destination: SAPCCM4X.AMUTWJEQ01.00 (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 38546511, {15FCDEDC-1AEF-F19A-9170-005056B06C7E})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: sapccm4x)
SERVER> Called function module: SALF_AGENT_STATUS_UPDATE
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT'
Transaction program not registered
DEST =SAPCCM4X.AMUTWJEQ01.00
HOST =%%RFCSERVER%%
PROG =amutwjeq01.sapccm4x.00
GWHOST =amutwjps05.dynonobel.net
GWSERV =sapgw01
As per CCMS agents documentation, this SAPCCM4X.<HOSTNAME>.<SYS No> gets automatically created.
I am not able to figure out the reason on SDN and OSS notes for past 3 days!
Please share your thoughts!
Thanks.
Antarpreet
Hello,
Have you cheked the RFC created in Solman, test the RFC and check the error output.
Also check whether the RFC has activation type as 'Registered server program'.
Check the gateway details for the connection.
If nothing works de register the agent and try registering it again.
Regards,
Yoganand.V
Similar Messages
-
SLD Configuration : Error opening an RFC Connection
Hi All,
I am working on EP6 SP19 and trying to configure SLD.
I was trying to check the data collection with the transaction RZ70,and I got the following error:
Data collected succesfully
Used RFC Destination: SLD_NUC
RFC call failed: Error opening an RFC Connection
Existing periodic jobs removed, number: 1
Program scheduled: 20070327
Event controlled job already exists,scheduling not necessary
I performed the follloewing steps:
I have imported CRContent.zip succesfully.
I have configured the data supplier bridge with following parameters.
Update local SLD (sld/active): TRUE
RFC Gateway:
Server : <host name of J2EE server>
Service : <The SAP gateway service port> (here I gave sapgw00)
This gateway service is installed while installing WAS Java.
Please clarify if I can use the same or Do I need to install standalone gateway instance?
I restarted the Data supplier bridge it is running.
I have created RFC destinations through visual administrator with
JCO RFC provider and used the same name for the program id
in RFC destination of SM59
Once the above steps are done,I am getting the error.(Error opening RFC)
Please give me a clue of wat else do I need to do?
Regards,
SanthoshHi,
check the following once.
How to configure the R/3 system as technical system into portal is follows.
U need to add some properties in VA.
Then only it will works.
U can goto the VA and in SLD data supplier add some properties like this.
1)HTTP settings: host = poratl host , port=50000 ,user = portal username , pwd=give thepwd.
2)RFC settings : Gateway host= poratl host and Gatewayservice=sapgw00
3)CIM client generation settings :host and port are the same as above and user and PWD same above
After this u need to check the Cimclicnt and that shows success.
And finally u need to go to the SLD add ur r/3 system properties and and ip address and host name in the host file of ur windows.
and finally add message server host in the services file in ur windows.
Have you checked the JCo destinations And SLD connetions.
If all are correct then u can add the properties in the Application server
Host file add the IP address and alias name
C:\WINDOWS\system32\drivers\etc\host
in services file add the <Messageserverhost> 3600/tcp.
C:\WINDOWS\system32\drivers\etc\services.
Then it might helps you.
Thanks,
Lohi. -
EBP/CCM XI Catalog scenario; TCP RFC connection EBP to XI doesn't work
Hello All,
i have configured EBP/CCM <> XI Catalog scenario and when i try to execute the test connection for both TCP RFC connections "INTEGRATION_SERVER_<SID>, PLAIN_HTTP_ADAPTER_<SID>" I receive following "ICM_HTTP_CONNECTION_FAILED".
Does anybody know the problem? How can I solve this issue?
Many thanks in advance!
Regards,
JochenHi Chirag Gohil,
first of all many thanks for quick support (also to all!)
I have added the values as notice at your attached weblog
RZ10 (reboot done):
icm/server_port_0 PROT=HTTP,PORT=8005,TIMEOUT=30,PROCTIMEOUT=600
SXMB_ADM:
RUNTIME HTTP_TIMEOUT 10000
but no positive result. The same situation as before!
One additonal helpfull information:
I tryed to execute the respective TCP RFC connection at IE Browser an it works fine!
Targethost: <hostname>
Path Prefix: /sap/xi/engine?type=entry
ServiceNo.: 8005
Logon:
Language: EN
Client: 010
User: <user>
URL at Browser:
http://<hostname>:8005/sap/xi/engine?type=entry
Login with user works fine
XML wegside appeard with comment: "EMPTY_HTTP_REQUEST_RECEIVED"
I think this shows that generall connection works fine!
But why doesn't work the TCP RFC connection?
Many thanks in advance!
Regards,
Jochen -
Error when opening RFC Connection
Hello SAPers,
I have configured PDA in my ECC6.0 --- XI (ABAP+JAVA) Which was successful.
In my Web Dyno Pro Content Administrator
I have performed the JCO Destinations test which was successful
when I go to the URL
http://server:port/webdynpro/dispatcher/sap.com/isisrsrsmenapp/MainApp
entered the store number
In the next menu
Inventory Lookup when I enter the Article number and press Go Button
It is giving me error " Error when opening RFC Connection "
Rest of them working perfectly...
Do I need to do any configuration In Visual Admin?
Could anyone advice
Thanks In Advance
HariKrishnaThanks it got solved it was an error in RFC, I have changed the RFC now it is working fine
Thanks
Hari -
Error When Calling Up IGS (Error opening an RFC connection.)
hi experts,
i am getting error Error When Calling Up IGS (Error opening an RFC connection.)
when i excute in wad, i checked in forums regarding this issue ,it is suggested that in check in se38--> se38->GRAPHICS_IGS_ADMIN(execute)->then it opens one more window (IGS_RFC_DEST)execute(could not reach to IGS)
in RSRT if i execute IGS test button it is showing page cannot be displayed
can anybody give answer for this what to do
thanks
venuHi Venu,
I would suggest that you contact your basis team and ask them to check the entry for the IGS in SM59. -
Error opening an RFC connection
Hello guys,
I am gettinga following Error "Error when determining the receiver: Problem when determining the receiver when using the Interface Mapping: "COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection. Problem when determining the receiver when using the Interface Mapping: "COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection. "COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection.</"
Can someone help me out in this?
Thanks
SahilCheck these solved discussions:
SOAP scenario
JCO_COMMUNICATION_FAILURE Error at message procesing
Regards,
Abhishek. -
Error opening an RFC connection. FM: AC_FLUSH_CALL
In my code I have the return code 7 and message "Error opening an RFC Connection" when the function module AC_FLUSH_CALL is called.
Where can I start to find the error.
Thanks.please help. Thanks.
-
Hi Expert,
First, I'm sorry if I post in the wrong thread.
I have a problem when creating RFC Connection. I want to create RFC Connection between BW systems to R/3 System in SM59.
I already insert the right IP Address to the target system, but when I test the connection, I got this error :
host name 'SAP-BO-01' unknown / CPI-C error CM_PRODUCT_SPECIFIC_ERROR
I already test the connection from BW to R/3 and vice versa, using ping in command prompt, and I got no problem. Also, I already create a log on to the target system, and it was successful, but the RFC Connection still error.
Did you have any clue or solution about this?
I really appreciate every helpful comment from you. Thank You...Hi
Do you have mapping in the host file in the server? ask you basis team to check that.
If you can ping the server, that means connection is fine, only thing is there might be some entry missing in hosts or services file in the server.
During creation of RFC connection you can directly use the IP address also. as you said you are able to ping the server that means you got to know the IP address. Now use the below command to know the exact hostname.
ping -a <IP_ADDRESS>
Regards
Anindya -
Error while saving web template in WAD? Error in opening RFC Connection?
Hi All.
In BI 7.0, While trying to save an web template using BEx WAD resulting an error as mentioned below:
" Java communication error : Error when opening an RFC connection "
Who provides this RFC connection?
- By Basis guy or BI Guy or EP guy or helpdesk.
Please reply.
Thanks in Advance.Hi,
Kindly review the notes 917950 and 888687 and ensure that all your web configuration settings are proper.
Award points if helpful.
Thank you.
Regards
Suresh -
RFC connection error (VPN-access)
Hi!
I have the following error for the RFC connection:
The RFC connection is setup as follows.
/H/10.101.7.1/S/3299/H/10.151.6.194
10.101.7.1 = IP of our SAP Router
10.151.6.194 = IP of customer system
The RFC connection is established:
SAP Router (intern) --> Target systems
The error is:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner not reached (host 10.151.6.194, service sapgw20)
Error Details LOCATION: SAP-Gateway on host bksapp01 / sapgw20
Error Details DETAIL: NiPConnect2
Error Details CALL: SiPeekPendConn
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 592
Error Details ERROR NUMBER: 10060
Error Details ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details MODULE: nixxi.cpp
Error Details LINE: 8777
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 640
Error Details TIME: Thu Jun 19 10:42:42 2008
Error Details VERSION: 37
Can some one help to solve the problem?
Thank you very much
ThomHi
Change the saprouter string to
/H/10.101.7.1/S/3299/H/10.151.6.194/S/32<system number>
and try !!! -
RFC error with SAPOSS (test connection)
Hello All,
RFC error with SAPOSS Test connection
Language:EN
Client :001
User :OSS_RFC
Target system settings:
Balace load = Yes
RFC error is below:
Connection test SAPOSS
Connection type: R/3 connection
Connection error Error opening an RFC connection.
ERROR partner not reached (host 209.94.207.139, service sapdp99)
LOCATION SAP-Server orionbw_QBW_00 on host orionbw2 (wp 0)
DETAIL NiPConnect
CALL connect
COMPONENT NI (network interface)
COUNTER 9
ERROR TEXT Network is unreachable
ERROR NUMBER 101
MODULE nixxi.cpp
LINE 8628
RETURN CODE -10
SUBRC 0
RELEASE 640
TIME Wed Jul 30 10:06:05 2008
VERSION 37
Please let me know how to proceed.
Thanks in advance.
Best Regards,
PratyushaHi Markus,
I went to OSS1 transaction Menu ---> Parameter --> Settings -
> SAP Routers at Customer Site ---> SAP Router 1
i have Added Name and IP address and instance No.
Now its throwing another error:
=============================================
ERROR rgcwebsrv: route permission denied (orionbw2.rgc.corp to 147.204.2.5,
LOCATION SAProuter 37.11 on rgcwebsrv
COMPONENT NI (network interface)
COUNTER 5580
MODULE
LINE
RETURN CODE -94
SUBRC 0
RELEASE 640
TIME Wed Jul 30 10:41:28 2008
VERSION 37
=============================================
We are struck here.
Thanks in advance
Best Regards,
Pratyusha -
RFC Error:Error When opening an RFC Connection
Hi All,
When im trying the following, RFC error is thrown:
TCODE DSWP->EDIT->Fetch SAP Components
The Error is:
RFC Error:Error When opening an RFC Connection
Also I have checked in SM59, the following 3 RFC Connections are throwing error:
SAP-OSS
SAP-OSS-LIST-O01
SAPOSS
Kindly suggest me to do the workarounds.
Thanks and Regards,
FaisalHi Raguraman,
Following is the error text for RFC Connection SAP-OSS
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: timeout while pending for route completion
Error Details LOCATION: SAP-Server SMGDCS1S_D18_01 on host SMGDCS1S (wp 1)
Error Details DETAIL: NiErrSet
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 3
Error Details MODULE:
Error Details LINE:
Error Details RETURN CODE: -12
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Fri May 02 00:33:48 2008
Error Details VERSION: 38
Kindly do the needful.
Regards,
Faisal -
Error in Creating RFC Destination
Hi,
I am Going for RFC to File Scenario.
For Sender RFC it < I am trying to create RFC Destination in SAP r/3
I have Given
RFC Dest : XI_CONNID
Conn type : Tcp/IP
Activation Type : Register Server Program
Program ID :sap
gateway host : sap-server( Sap server)
gateway service : sapgw00.
I saved and I tested but it is showing errors.
Error : Error in Opening RFC Connection
Whe i Click on this error message it i showing
Error Program sap not registered.
Points will be awarded.
regards,
JayasimhaDear Jaya,
create a RFC SENDER communication channel first and then activate the channel.
now go to sm59 there use the same program-id as u did at RFC SENDER COMMUNICATION CHANNEL.
note:program-id is registered by XI at R/3 level with details related to it's profile(XI profile).
step 1) create RFC COMMUNICATION CHANNEL with program-id as "any name" at XI first .
2)create TCP/IP connection with registered program-id created by XI at first step
so when you execute steps 2 then 1 you will get error ,coz by that time program-id is not yet registere by XI in R/3 domain.
after executing step 1 i.e creating porgram id at R/3 through XI.
got to ST22 at R/3 and check whether any dump is found against "XI creating porgram-id at R/3 level".
we failed at creating PROGRAM-ID itself at R/3 level because of missing authorizations against my R/3 user id,which we will be using at XI RFC channel.
generally problem will be at PROGRAM-ID creation itself,so just go to ST22 and check any authorizations missing for your userid which is being used at RFC channel configuring at XI.
Thanks & Regards,
Rama Krishna -
Error in BPM: "COMMUNICATION FAILURE" during JCo call. Error opening an RFC
hello experts
i am receiving the above error incase of BPM scenario where i am having a Transform step and synchronous RFC step.
i referred to the few threads discussing such problems and was trying to find whether my mapping is correct and i tested my mappings using my payload which looks good.
When looked into the Mapping trace of the BPM "Show container" i found error ""COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection" and it seems that when BPM is attempting to call interface mapping it is throwing this error.
Thanks in advance.
Regards
rajeevhi,
I think no problen with the mapping part,
jco connection requird when xi try to stablish the connection with the adapter .
please look the link provided.
Setup and test SAP Java Connector outbound connection
please also check the following parameter at the exchange profile
com.sap.aii.rwb.server.centralmonitoring.r3.ashost
com.sap.aii.rwb.server.centralmonitoring.r3.client
com.sap.aii.rwb.server.centralmonitoring.r3.sysnr
com.sap.aii.rwb.server.centralmonitoring.httpport
these parameter must be given properly.
if every thing is ok than and problem still exist than try to restart the system.
for us after restarting its worked fine.
regards,
navneet -
At the time of GR posting this runtime message occurs
No RFC destination is defined for SAP Global Trade Services
Thanks
Regards
Anukul
Edited by: ANU GIR on Nov 10, 2008 10:52 AMHi,
Check in Sap market Market Place , You will Sap notes for this Error ,
Also check this [Thread|http://sap.ittoolbox.com/groups/technical-functional/sap-log-sd/posting-goods-issue-error-message_type_x-no-rfc-connection-is-defined-for-sap-global-trade-services-2198467#]
[Thread|No RFC destination is defined for SAP Global Trade Services;
[Thread|HI SAP Friends;
Rhea.
Maybe you are looking for
-
How do I delete an iPad email account in iOS7?
I want to delete my Verizon accounts to see if iOS7 will use the new servers when I add the accounts back, but I can't figure out how to delete the accounts.
-
"Could not complete your request because the file is not compatible with this verson of PS".
Hi, I have adobe PS 2014, purchased about 1.5 months ago. Yesterday i saved my my file as psd, today i attempted to open my file only to recieve the following msg "Could not complete your request because the file is not compatible with this verson of
-
I have a $50 Music Card - the plastic gift card, not the paper gift certificate - my questions are - Can I use this Music Card to purchase TV shows? I am a resident of the United States with a U.S. address. Can I use this Music Card to purchase mp3 b
-
Partitioning of tables in oracle 1og
I want to do the partitioning of tables due to increasing their size.Can anyone guide me cn I do it? Is it possible to do it?If possible then how can i do it.plz guide mme with al qeuries. thanks.
-
Upgrading from 10.3.9 to Tiger 10.4.6
I would like to find out if there are any major issues in upgrading to the Tiger OS? What I'm concerned about is how the new OS will effect the functionality of my pre-intel software, as well as my pre-intel G5.